aboutsummaryrefslogtreecommitdiffstats
path: root/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-12-09Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds9-61/+170
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix lost speaker volume controls ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins ALSA: hda/realtek - Don't create extra controls with channel suffix ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs ASoC: Provide a more complete DMA driver stub ASoC: Remove references to corgi and spitz from machine driver document ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 ASoC: uda1380: Return proper error in uda1380_modinit failure path ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C ASoC: Mark WM8994 ADC muxes as virtual ALSA: hda/realtek - Fix Oops in alc_mux_select() ALSA: sis7019 - give slow codecs more time to reset
2011-12-07ALSA: hda/realtek - Fix lost speaker volume controlsTakashi Iwai1-7/+30
When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-07ALSA: hda/realtek - Create "Bass Speaker" for two speaker pinsTakashi Iwai1-0/+2
On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-07ALSA: hda/realtek - Don't create extra controls with channel suffixTakashi Iwai1-9/+15
The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-06Merge branch 'fix/asoc' into for-linusTakashi Iwai6-12/+43
2011-12-06ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changesTakashi Iwai1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-06Merge branch 'fix/hda-idt-fix' into fix/hdaTakashi Iwai1-21/+24
2011-12-06ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecsTakashi Iwai1-21/+24
Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-06ASoC: Provide a more complete DMA driver stubMark Brown1-1/+30
Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Tested-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-12-04ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2CAxel Lin1-1/+1
SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-04ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700Axel Lin1-1/+2
SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-04ASoC: uda1380: Return proper error in uda1380_modinit failure pathAxel Lin1-2/+2
Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-03ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2CAxel Lin1-1/+2
SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Mark WM8994 ADC muxes as virtualMark Brown1-6/+6
Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds15-542/+74
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED ALSA: hda_intel - revert a quirk that affect VIA chipsets ALSA: hda - Avoid touching mute-VREF pin for IDT codecs firmware: Sigma: Fix endianess issues firmware: Sigma: Skip header during CRC generation firmware: Sigma: Prevent out of bounds memory access ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer ASoC: Supply dcs_codes for newer WM1811 revisions ASoC: Error out if we can't generate a LRCLK at all for WM8994 ASoC: Correct name of Speyside Main Speaker widget ASoC: skip resume of soc-audio devices without codecs ASoC: cs42l51: Fix off-by-one for reg_cache_size ASoC: drop support for PlayPaq with WM8510 ASoC: mpc8610: tell the CS4270 codec that it's the master ASoC: cs4720: use snd_soc_cache_sync() ASoC: SAMSUNG: Fix build error ASoC: max9877: Update register if either val or val2 is changed ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET
2011-12-02ALSA: hda/realtek - Fix Oops in alc_mux_select()Takashi Iwai1-0/+2
When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-02ALSA: sis7019 - give slow codecs more time to resetDavid Dillow1-11/+53
There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: KotCzarny <tjosko@yahoo.com> Signed-off-by: David Dillow <dave@thedillows.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-01Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds1-1/+2
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-12-01Merge branch 'fix/asoc' into for-linusTakashi Iwai12-522/+40
2011-12-01ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LEDCharles Chin1-18/+0
The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-29ALSA: hda_intel - revert a quirk that affect VIA chipsetsMarc Vertes1-1/+0
This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.html Signed-of-by: Marc Vertes <mvertes@sigfox.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-29ALSA: hda - Avoid touching mute-VREF pin for IDT codecsTakashi Iwai1-1/+3
Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-29ALSA: usb-audio - Support for Roland GAIA SH-01 SynthesizerJohn F Leach1-0/+31
Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: John F Leach <jfleach@jfleach.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-28ASoC: Supply dcs_codes for newer WM1811 revisionsMark Brown1-0/+2
Based on initial data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28ASoC: Error out if we can't generate a LRCLK at all for WM8994Mark Brown1-0/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds25-102/+229
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda - Fix jack-detection control of VT1708 ALSA: hda - cut and paste typo in cs420x_models[] ALSA: hda/realtek - Minor cleanup ALSA: hda/realtek - Fix missing inits of item indices for auto-mic ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config() ALSA: hda - fail ELD reading early ALSA: lx6464es - fix device communication via command bus ALSA: lx6464es - command buffer API cleanup ALSA: hda - repoll ELD content for multiple times ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards ASoC: Ensure WM8731 register cache is synced when resuming from disabled ALSA: cs5535 - Fix an endianness conversion ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls ASoC: wm_hubs: fix DB_RANGE size ASoC: wm9090: fix DB_RANGE size ASoC: wm8993: fix DB_RANGE size ASoC: wm8962: fix DB_RANGE size ASoC: sgtl5000: fix DB_RANGE size ASoC: rt5631: fix DB_RANGE size ...
2011-11-27Merge branch 'fix/hda' into for-linusTakashi Iwai3-46/+56
2011-11-27ALSA: hda - Fix jack-detection control of VT1708Takashi Iwai1-33/+43
VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-27ALSA: hda - cut and paste typo in cs420x_models[]Dan Carpenter1-1/+1
The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-27ASoC: Correct name of Speyside Main Speaker widgetMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-26ARM: 7175/1: add subname parameter to mfp_set_groupg callersAxel Lin1-1/+2
commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23Merge branch 'fix/asoc' into for-linusTakashi Iwai14-19/+88
2011-11-23ASoC: skip resume of soc-audio devices without codecsEric Miao1-0/+6
There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: cs42l51: Fix off-by-one for reg_cache_sizeAxel Lin1-1/+1
Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: drop support for PlayPaq with WM8510Paul Bolle3-497/+1
SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca9683b ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ALSA: hda/realtek - Minor cleanupTakashi Iwai1-12/+12
Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda/realtek - Fix missing inits of item indices for auto-micTakashi Iwai1-1/+13
When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko <dion@inhex.net> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecsTakashi Iwai1-9/+23
The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config()Takashi Iwai1-3/+3
In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ASoC: mpc8610: tell the CS4270 codec that it's the masterTimur Tabi1-8/+16
Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is detected") requires the machine driver to tell the CS4270 codec driver whether the CS4270 should be configured for master or slave operation. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-22ASoC: cs4720: use snd_soc_cache_sync()Daniel Mack1-9/+1
Replace the manual register restore mechanism in cs4270.c and call the generic snd_soc_cache_sync() handler instead. This factors code out in favour of core facilities and also fixes a bus confusion that is most probably caused by intermixing i2c-regmap functions and i2c_smbus_* accessors. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-22ASoC: SAMSUNG: Fix build errorBoojin Kim1-0/+1
This patch adds <linux/modules.h> to fix following build errors. sound/soc/codecs/wm8994.c: In function 'wm8994_readable': sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994' sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-22ASoC: max9877: Update register if either val or val2 is changedAxel Lin1-5/+5
In the case of ((max9877_regs[reg] >> shift) & mask) != val but ((max9877_regs[reg2] >> shift) & mask) == val2, current code does not update the registers. Fix the logic to update registers if either val or val2 is changed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-22ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSETAxel Lin1-1/+1
According to the datasheet: The BIT[5:4] of ADC Control Register 2 is to control the word width. 00 = 25 Bits 01 = 20 Bits 10 = 16 Bits 11 = Invalid Thus, the AD1836_ADC_WORD_OFFSET should be defined as 4. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-11-22ALSA: hda - fail ELD reading earlyWu Fengguang1-9/+19
With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: lx6464es - fix device communication via command busTim Blechmann1-4/+12
commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann <tim@klingt.org> LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: lx6464es - command buffer API cleanupTim Blechmann2-6/+4
the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: hda - repoll ELD content for multiple timesWu Fengguang1-6/+10
Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: hdspm - Fix PCI ID for PCIe RME MADI cardsAdrian Knoth1-1/+1
Commit c09403dcc5698abf214329fbbf3cf8dbb5558bea has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-21ASoC: Ensure WM8731 register cache is synced when resuming from disabledMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.