| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add two new fields to save the source widget and sink widget
pointers in struct snd_sof_route to make it easier to look up
routes by source/sink widget. Also, add a flag to indicate
if the route has been set up in the DSP. These will be used
when the dynamic pipeline feature is implemented and routes
will have to be set up at run time.
Also, add a new sof_tear_down_pipelines() callback, that will
used to reset the set up status for all routes during suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Export a couple of DAPM functions that can be used by
ASoC drivers to determine connected widgets when a PCM
is started.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor the existing code to use helper functions to
set up/free widgets, send dai config and set up kcontrols for
widgets. These will be reused later on for setting up widgets in
the connected DAPM widgets list for a particular PCM when the
dynamic pipeline feature is implemented.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Today, we set up all widgets required for all PCM streams
at the time of topology parsing even if they are not
used. An optimization would be to only set up the widgets
required for currently active PCM streams. This would give
the FW the opportunity to power gate unused memory blocks,
thereby saving power.
For dynamic pipelines, the widgets in the connected DAPM path
for each PCM will need to be set up at runtime. This patch
introduces a new token, DYNAMIC_PIPELINE, for scheduler type
widgets that indicate whether a pipeline should be set up
statically during topology load or at runtime when the PCM is
opened. Introduce a new field called dynamic_pipeline_widget
in struct snd_sof_widget to save the value of the parsed token.
The token is set only for the pipeline (scheduler type)
widget and must be propagated to all widgets in the same
pipeline during topology load. Introduce another field called
pipe_widget in struct snd_sof_widget that saves the pointer to
the scheduler widget with the same pipeline ID as that of the
widget. This field is populated when the pipeline completion
callback is invoked during topology loading.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new field to save the access setting for all controls
in struct snd_sof_control. This will be used to ensure that
only widgets belonging to static pipelines have volatile
controls.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the SOF driver, the operations performed in the complete callback
can fail and therefore topology loading should return an error in
such cases. So, change the signature of the complete op
in struct snd_soc_tplg_ops to return an int to return the error.
Also, amend the complete callback functions in the SOF driver and
the SKL driver to conform with the new signature.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The struct iapq8096_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211001115030.10402-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the system resumes from S3, if the system plays a beep,
there is continuous "Zizi.." noise from HP that could be heard.
It is caused by the SAR mode switch during the combo jack
re-detection which be executed parallelly in a workqueue
after the system resumes.
This patch changes the behavior of SAR mode switch to
avoid this issue.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211001074113.2223-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When codec's ASRC was enabled, the DA and AD filters use
the reference clk which tracks the I2S clks.
And if the I2S clks' timing of open and close are not expected,
this patch allows the filters to switch to use sysclk if
ASRC's ref clks disappeared and could fix the below possible issues:
1. Avoid DA filter to keep surplus samples.
2. Avoid that AD filter works failed during dapm's power on.
For example,
if I2S clks were closed before dacdat during playback off
due to jack unplug, it causes ref clks disappeared and
DA filter remained some samples which will produce pop noise
on the next HP playback.
ASRC auto-disable could clear the samples during the playback off.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211001074113.2223-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
platforms->of_node and codes->of_node are assigned in probe function,
and of_node_put is called at the end of probe function, because of_node
seems to be not used after probe functon
In this patch, of_node_put is moved to platform remove function in case
of_node is used at any occasions after probe function in the future.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211001031601.3953-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a board config adl_mx98360a_rt5682 to support alc5682 headset
codec and max98360a speaker amplifier. Follow Intel BT offload design
by connecting alc5682 to SSP0 and max98360a to SSP1.
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211001150316.414141-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The struct tegra_machine_snd_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211001114517.6752-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit d215f63d49da ("ALSA: usb-audio: Check available frames for
the next packet size") introduced the available frame size check, but
the conversion forgot to initialize the temporary variable properly,
and it resulted in a bogus calculation. This patch fixes it.
Fixes: d215f63d49da ("ALSA: usb-audio: Check available frames for the next packet size")
Reported-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211001104417.14291-1-colin.king@canonical.com
Link: https://lore.kernel.org/r/20211001105425.16191-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The headphone mic is not working on Dell Latitude laptops with ALC3254.
The codec vendor id is 0x10ec0295 and share the same pincfg as defined
in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will
be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is
using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
need to be applied instead.
Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before
a generic fixup comes out.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.
The commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.
Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964
Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The DAI clock is only used in I2S mode, to make it clear
and to fix clock resource release issue, we move CCF clock
related code to rt5682_i2c_probe to fix clock
register/unregister issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210929054344.12112-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX8ULP the audio interface and codec are controlled
by Cortex-M domain, Cortex-M core provides audio service
over rpmsg.
The rpmsg audio function is almost same as i.MX7ULP
platform, so share same configuration.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1632972413-22130-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove a repeated "#include <linux/firmware.h>" in line 32.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210929123217.5240-1-guozhengkui@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF
adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are
added.
It will make the menuconfig user experience much cleaner if we move the
SOF options under a separate page.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210930070438.16846-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revise the macro RT5682S_PLLB_SRC_MASK to 0x1
because the mux is only two-source.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210930102928.28628-3-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It could observe the debug messages more clearly by using dev_dbg.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210930102928.28628-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reg is for SW reset.
It shouldn't have default value, so remove.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210930102928.28628-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling")
replaced the nau8824_dapm_enable_pin() helper with direct calls to
snd_soc_dapm_enable_pin(), but the helper was using
snd_soc_dapm_force_enable_pin() and not forcing the MICBIAS + SAR
supplies on breaks headphone vs headset and button-press detection.
Replace the snd_soc_dapm_enable_pin() calls with
snd_soc_dapm_force_enable_pin() to fix this.
Cc: stable@vger.kernel.org
Fixes: 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210929201512.460360-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
John Keeping reported and posted a patch for a potential UAF in
rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be
called after the associated rawmidi object got already freed.
After a deeper look, it turned out that the bug is rather the
incorrect private_free call order for a snd_seq_device. The
snd_seq_device private_free gets called at the release callback of the
sequencer device object, while this was rather expected to be executed
at the snd_device call chains that runs at the beginning of the whole
card-free procedure. It's been broken since the rewrite of
sequencer-device binding (although it hasn't surfaced because the
sequencer device release happens usually right along with the card
device release).
This patch corrects the private_free call to be done in the right
place, at snd_seq_device_dev_free().
Fixes: 7c37ae5c625a ("ALSA: seq: Rewrite sequencer device binding with standard bus")
Reported-and-tested-by: John Keeping <john@metanate.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
While draining a stream, ALSA PCM core stops the stream by issuing
snd_pcm_stop() after all data has been sent out. And, at PCM trigger
stop, currently USB-audio driver kills the in-flight URBs explicitly,
then at sync-stop ops, sync with the finish of all remaining URBs.
This might result in a drop of the drained samples as most of
USB-audio devices / hosts allow relatively long in-flight samples (as
a sort of FIFO).
For avoiding the trimming, this patch changes the stream-stop behavior
during PCM draining state. Under that condition, the pending URBs
won't be killed. The leftover in-flight URBs are caught by the
sync-stop operation that shall be performed after the trigger-stop
operation.
Link: https://lore.kernel.org/r/20210929080844.11583-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is another attempt to improve further the handling of playback
stream in the low latency mode. The latest workaround in commit
4267c5a8f313 ("ALSA: usb-audio: Work around for XRUN with low latency
playback") revealed that submitting URBs forcibly in advance may
trigger XRUN easily. In the classical mode, this problem was avoided
by practically delaying the submission of the actual data with the
pre-submissions of silent data before triggering the stream start.
But that is exactly what we want to avoid.
Now, in this patch, instead of the previous workaround, we take a
similar approach as used in the implicit feedback mode. The URBs are
queued at the PCM trigger start like before, but we check whether the
buffer has been already filled enough before each submission, and
stop queuing if the data overcomes the threshold. The remaining URBs
are kept in the ready list, and they will be retrieved in the URB
complete callback of other (already queued) URBs. In the complete
callback, we try to fill the data and submit as much as possible
again. When there is no more available in-flight URBs that may handle
the pending data, we'll check in PCM ack callback and submit and
process URBs there in addition. In this way, the amount of in-flight
URBs may vary dynamically and flexibly depending on the available data
without hitting XRUN.
The following things are changed to achieve the behavior above:
* The endpoint prepare callback is changed to return an error code;
when there is no enough data available, it may return -EAGAIN.
Currently only prepare_playback_urb() returns the error.
The evaluation of the available data is a bit messy here; we can't
check with snd_pcm_avail() at the point of prepare callback (as
runtime->status->hwptr hasn't been updated yet), hence we manually
estimate the appl_ptr and compare with the internal hwptr_done to
calculate the available frames.
* snd_usb_endpoint_start() doesn't submit full URBs if the prepare
callback returns -EAGAIN, and puts the remaining URBs to the ready
list for the later submission.
* snd_complete_urb() treats the URBs in the low-latency mode similarly
like the implicit feedback mode, and submissions are done in
(now exported) snd_usb_queue_pending_output_urbs().
* snd_usb_queue_pending_output_urbs() again checks the error value
from the prepare callback. If it's -EAGAIN for the normal stream
(i.e. not implicit feedback mode), we push it back to the ready list
again.
* PCM ack callback is introduced for the playback stream, and it calls
snd_usb_queue_pending_output_urbs() if there is no in-flight URB
while the stream is running. This corresponds to the case where the
system needs the appl_ptr update for re-submitting a new URB.
* snd_usb_queue_pending_output_urbs() and the prepare EP callback
receive in_stream_lock argument, which is a bool flag indicating the
call path from PCM ack. It's needed for avoiding the deadlock of
snd_pcm_period_elapsed() calls.
* Set the new SNDRV_PCM_INFO_EXPLICIT_SYNC flag when the new
low-latency mode is deployed. This assures catching each applptr
update even in the mmap mode.
Fixes: 4267c5a8f313 ("ALSA: usb-audio: Work around for XRUN with low latency playback")
Link: https://lore.kernel.org/r/20210929080844.11583-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In theory, stop_urbs() may be called concurrently.
Although we have the state check beforehand, it's safer to apply
ep->lock during the critical list head manipulations.
Link: https://lore.kernel.org/r/20210929080844.11583-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is yet more preparation for the upcoming changes.
Extend snd_usb_endpoint_next_packet_size() to check the available
frames and return -EAGAIN if the next packet size is equal or exceeds
the given size. This will be needed for avoiding XRUN during the low
latency operation.
As of this patch, avail=0 is passed, i.e. the check is skipped and no
behavior change.
Link: https://lore.kernel.org/r/20210929080844.11583-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a playback stream runs in the implicit feedback mode, its
operation is passive and won't start unless the capture packet is
received. This behavior contradicts with the low-latency playback
mode, and we should turn off lowlatency_playback flag accordingly.
In theory, we may take the low-latency mode when the playback-first
quirk is set, but it still conflicts with the later operation with the
fixed packet numbers, so it's disabled all together for now.
Link: https://lore.kernel.org/r/20210929080844.11583-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The free-wheel stream operation like dmix may not update the appl_ptr
appropriately, and it doesn't fit with the low-latency playback mode.
Disable the low-latency playback operation when the stream is set up
in such a mode.
Link: https://lore.kernel.org/r/20210929080844.11583-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preparation patch for the upcoming low-latency improvement
changes.
Rename early_playback_start flag with lowlatency_playback as it's more
intuitive. The new flag is basically a reverse meaning.
Along with the rename, factor out the code to set the flag to a
function. This makes the complex condition checks simpler.
Also, the same flag is introduced to snd_usb_endpoint, too, that is
carried from the snd_usb_substream flag. Currently the endpoint flag
isn't still referred, but will be used in later patches.
Link: https://lore.kernel.org/r/20210929080844.11583-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
USB-audio driver tries to sync with the clear of all pending URBs in
wait_clear_urbs(), and it waits for all bits in active_mask getting
cleared. This works fine for the normal operations, but when a stream
is managed in the implicit feedback mode, there is still a very thin
race window: namely, in snd_complete_usb(), the active_mask bit for
the current URB is once cleared before re-submitted in
queue_pending_output_urbs(). If wait_clear_urbs() is called during
that period, it may pass the test and go forward even though there may
be a still pending URB.
For covering it, this patch adds a new counter to each endpoint to
keep the number of in-flight URBs, and changes wait_clear_urbs()
checking this number instead. The counter is decremented at the end
of URB complete, hence the reference is kept as long as the URB
complete is in process.
Link: https://lore.kernel.org/r/20210929080844.11583-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a single clock source is shared among several endpoints, we have
to keep the same rate on all active endpoints as long as the clock is
being used. For dealing with such a case, this patch adds one more
check in the hw params constraint for the rate to take the shared
clocks into account. The current rate is evaluated from the endpoint
list that applies the same clock source.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190418
Link: https://lore.kernel.org/r/20210929080844.11583-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289
audio just like its sibling product XPS 9510, so it requires the same
quirk to enable woofer output. Tested on my Dell Precision 5560.
Signed-off-by: John Liu <johnliu55tw@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The commit f87e7f25893d ("ALSA: hda - Improved position reporting on
SKL+") changed the PCM position report for SKL+ chips to use DPIB, but
according to Pierre, DPIB is no best choice for the accurate position
reports and it often reports too early. The recommended method is
rather the classical position buffer.
This patch makes the PCM position reporting on SKL+ back to the
position buffer again.
Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210929072934.6809-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The position reporting on Intel Skylake and later chips via
azx_get_pos_skl() contains a udelay(20) call for the capture streams.
A call for this alone doesn't sound too harmful. However, as the
pointer PCM ops is one of the hottest path in the PCM operations --
especially for the timer-scheduled operations like PulseAudio -- such
a delay hogs CPU usage significantly in the total performance.
The code there was taken from the original code in ASoC SST Skylake
driver blindly. The udelay() is a workaround for the case where the
reported position is behind the period boundary at the timing
triggered from interrupts; applications often expect that the full
data is available for the whole period when returned (and also that's
the definition of the ALSA PCM period).
OTOH, HD-audio (legacy) driver has already some workarounds for the
delayed position reporting due to its relatively large FIFO, such as
the BDL position adjustment and the delayed period-elapsed call in the
work. That said, the udelay() is almost superfluous for HD-audio
driver unlike SST, and we can drop the udelay().
Though, the current code doesn't guarantee the full period readiness
as mentioned in the above, but rather it checks the wallclock and
detects the unexpected jump. That's one missing piece, and the drop
of udelay() needs a bit more sanity checks for the delayed handling.
This patch implements those: the drop of udelay() call in
azx_get_pos_skl() and the more proper check of hwptr in
azx_position_ok(). The latter change is applied only for the case
where the stream is running in the normal mode without
no_period_wakeup flag. When no_period_wakeup is set, it essentially
ignores the period handling and rather concentrates only on the
current position; which implies that we don't need to care about the
period boundary at all.
Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210929072934.6809-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The check of the returned error code is missing in
scarlett2_update_monitor_other(). Let's fix it.
Fixes: d5bda7e03982 ("ALSA: usb-audio: scarlett2: Add support for the talkback feature")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/202109131831.9IodEzRx-lkp@intel.com
Link: https://lore.kernel.org/r/20210929073540.9611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
Also, make use of the struct_size() helper in kzalloc().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210929191504.GA337268@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The struct mop500_ab8500_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210929094401.28086-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These are only assigned to the ops field in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210929093121.21253-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To follow 20-character length limitation of platform device name, we
have only 7 character space for amplifier. Therefore, the last
character of mx98357a and mx98360a is removed to save space.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Fixes: e224ef76fa8a ('ASoC: intel: sof_rt5682: support jsl_rt5682s_mx98360a board')
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210927143249.439129-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we get an error on reply (msg->reply_error) then we should print the
error value out.
At the same time extend the print to include the message size as well and
do the same in case of a timeout.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210928073615.29574-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These helped troubleshoot some DMA issue in SOF.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928102635.26227-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If an invalid stream is passed to snd_sof_ipc_msg_data() it won't
fill the provided object with data. The caller has to be able to
recognise such cases to avoid handling invalid data. Make the
function return an error when failing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928103516.8066-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dp node and hdmi node are retrieved from of_parse_phandle(), so using
of_node_put() on them before return.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210928063520.23927-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse (make C=2) complains about undeclared variables. Fix by adding
a real prototype instead of 'extern' in sof-of-dev.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928072807.27838-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no restore_stream flag anymmore.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210928074030.30553-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to provide more information in case of timeout observed while
reading STREAM_SD_OFFSET, print out the stream name or in case there is
no audio stream associated (like dma-trace), print "--"
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210928081744.4785-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hrtimer callback pcsp_do_timer() prepares rearming of the timer with
hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to
forward the expiry time of the hrtimer by a multiple of the period argument
so that the expiry time greater than the time provided in the 'now'
argument.
pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry
time as 'now' argument. That's providing a periodic timer expiry, but is
not really robust when the timer callback is delayed so that the resulting
new expiry time is already in the past which causes the callback to be
invoked immediately again. If the timer is delayed then the back to back
invocation is not really making it better than skipping the missed
periods. Sound is distorted in any case.
Use hrtimer_forward_now() which ensures that the next expiry is in the
future. This prevents hogging the CPU in the timer expiry code and allows
later on to remove hrtimer_forward() from the public interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Ranjani Sridharan
Rikard Falkeborn
Derek Fang
Trevor Wu
Malik_Hsu
Takashi Iwai
Chris Chiu
Geraldo Nascimento
Jack Yu
Shengjiu Wang
Guo Zhengkui
Peter Ujfalusi
Hans de Goede
John Liu
Gustavo A. R. Silva
Brent Lu
Marc Herbert
Guennadi Liakhovetski
Pierre-Louis Bossart
Thomas Gleixner