| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, prog array map and map of maps are not supported
in bpftool. This patch added the support.
Different from other map types, for prog array map and
map of maps, the key returned bpf_get_next_key() may not
point to a valid value. So for these two map types,
no error will be printed out when such a scenario happens.
The following is the plain and json dump if btf is not available:
$ ./bpftool map dump id 10
key: 08 00 00 00 value: 5c 01 00 00
Found 1 element
$ ./bpftool -jp map dump id 10
[{
"key": ["0x08","0x00","0x00","0x00"
],
"value": ["0x5c","0x01","0x00","0x00"
]
}]
If the BTF is available, the dump looks below:
$ ./bpftool map dump id 2
[{
"key": 0,
"value": 7
}
]
$ ./bpftool -jp map dump id 2
[{
"key": ["0x00","0x00","0x00","0x00"
],
"value": ["0x07","0x00","0x00","0x00"
],
"formatted": {
"key": 0,
"value": 7
}
}]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add "bpftool net" support. Networking devices are enumerated
to dump device index/name associated with xdp progs.
For each networking device, tc classes and qdiscs are enumerated
in order to check their bpf filters.
In addition, root handle and clsact ingress/egress are also checked for
bpf filters. Not all filter information is printed out. Only ifindex,
kind, filter name, prog_id and tag are printed out, which are good
enough to show attachment information. If the filter action
is a bpf action, its bpf program id, bpf name and tag will be
printed out as well.
For example,
$ ./bpftool net
xdp [
ifindex 2 devname eth0 prog_id 198
]
tc_filters [
ifindex 2 kind qdisc_htb name prefix_matcher.o:[cls_prefix_matcher_htb]
prog_id 111727 tag d08fe3b4319bc2fd act []
ifindex 2 kind qdisc_clsact_ingress name fbflow_icmp
prog_id 130246 tag 3f265c7f26db62c9 act []
ifindex 2 kind qdisc_clsact_egress name prefix_matcher.o:[cls_prefix_matcher_clsact]
prog_id 111726 tag 99a197826974c876
ifindex 2 kind qdisc_clsact_egress name cls_fg_dscp
prog_id 108619 tag dc4630674fd72dcc act []
ifindex 2 kind qdisc_clsact_egress name fbflow_egress
prog_id 130245 tag 72d2d830d6888d2c
]
$ ./bpftool -jp net
[{
"xdp": [{
"ifindex": 2,
"devname": "eth0",
"prog_id": 198
}
],
"tc_filters": [{
"ifindex": 2,
"kind": "qdisc_htb",
"name": "prefix_matcher.o:[cls_prefix_matcher_htb]",
"prog_id": 111727,
"tag": "d08fe3b4319bc2fd",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_ingress",
"name": "fbflow_icmp",
"prog_id": 130246,
"tag": "3f265c7f26db62c9",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "prefix_matcher.o:[cls_prefix_matcher_clsact]",
"prog_id": 111726,
"tag": "99a197826974c876"
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "cls_fg_dscp",
"prog_id": 108619,
"tag": "dc4630674fd72dcc",
"act": []
},{
"ifindex": 2,
"kind": "qdisc_clsact_egress",
"name": "fbflow_egress",
"prog_id": 130245,
"tag": "72d2d830d6888d2c"
}
]
}
]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
|
When listed all maps, bpftool currently shows (null) for xskmap.
Added xskmap type in map_type_name[] to show correct type.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The btf pretty print is added to percpu arraymap,
percpu hashmap and percpu lru hashmap.
For each <key, value> pair, the following will be
added to plain/json output:
{
"key": <pretty_print_key>,
"values": [{
"cpu": 0,
"value": <pretty_print_value_on_cpu0>
},{
"cpu": 1,
"value": <pretty_print_value_on_cpu1>
},{
....
},{
"cpu": n,
"value": <pretty_print_value_on_cpun>
}
]
}
For example, the following could be part of plain or json formatted
output:
{
"key": 0,
"values": [{
"cpu": 0,
"value": {
"ui32": 0,
"ui16": 0,
}
},{
"cpu": 1,
"value": {
"ui32": 1,
"ui16": 0,
}
},{
"cpu": 2,
"value": {
"ui32": 2,
"ui16": 0,
}
},{
"cpu": 3,
"value": {
"ui32": 3,
"ui16": 0,
}
}
]
}
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When command line parsing fails in the while loop in do_event_pipe()
because the number of arguments is incorrect or because the keyword is
unknown, an error message is displayed, but bpftool remains stuck in
the loop. Make sure we exit the loop upon failure.
Fixes: f412eed9dfde ("tools: bpftool: add simple perf event output reader")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lots of overlapping changes, mostly trivial in nature.
The mlxsw conflict was resolving using the example
resolution at:
https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add BPF_MAP_TYPE_CGROUP_STORAGE maps to the list
of maps types which bpftool recognizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For untracked things of tools/bpf, add this.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fix inconsistent IS_ERR and PTR_ERR in get_btf,
the proper pointer to be passed as argument is '*btf'
This issue was detected with the help of Coccinelle.
Fixes: 2d3feca8c44f ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
|
|
Arguments of 'pin' subcommand should be checked
at the very beginning of do_pin_any().
Otherwise segfault errors can occur when using
'map pin' or 'prog pin' commands, so fix it.
# bpftool prog pin id
Segmentation fault
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool does not export features it probed for, i.e.
FEATURE_DUMP_EXPORT is always empty, so don't try to communicate
the features to libbpf. It has no effect.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch augments the output of bpftool's map dump and map lookup
commands to print data along side btf info, if the correspondin btf
info is available. The outputs for each of map dump and map lookup
commands are augmented in two ways:
1. when neither of -j and -p are supplied, btf-ful map data is printed
whose aim is human readability. This means no commitments for json- or
backward- compatibility.
2. when either -j or -p are supplied, a new json object named
"formatted" is added for each key-value pair. This object contains the
same data as the key-value pair, but with btf info. "formatted" object
promises json- and backward- compatibility. Below is a sample output.
$ bpftool map dump -p id 8
[{
"key": ["0x0f","0x00","0x00","0x00"
],
"value": ["0x03", "0x00", "0x00", "0x00", ...
],
"formatted": {
"key": 15,
"value": {
"int_field": 3,
...
}
}
}
]
This patch calls btf_dumper introduced in previous patch to accomplish
the above. Indeed, btf-ful info is only displayed if btf data for the
given map is available. Otherwise existing output is displayed as-is.
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This consumes functionality exported in the previous patch. It does the
main job of printing with BTF data. This is used in the following patch
to provide a more readable output of a map's dump. It relies on
json_writer to do json printing. Below is sample output where map keys
are ints and values are of type struct A:
typedef int int_type;
enum E {
E0,
E1,
};
struct B {
int x;
int y;
};
struct A {
int m;
unsigned long long n;
char o;
int p[8];
int q[4][8];
enum E r;
void *s;
struct B t;
const int u;
int_type v;
unsigned int w1: 3;
unsigned int w2: 3;
};
$ sudo bpftool map dump id 14
[{
"key": 0,
"value": {
"m": 1,
"n": 2,
"o": "c",
"p": [15,16,17,18,15,16,17,18
],
"q": [[25,26,27,28,25,26,27,28
],[35,36,37,38,35,36,37,38
],[45,46,47,48,45,46,47,48
],[55,56,57,58,55,56,57,58
]
],
"r": 1,
"s": 0x7ffd80531cf8,
"t": {
"x": 5,
"y": 10
},
"u": 100,
"v": 20,
"w1": 0x7,
"w2": 0x3
}
}
]
This patch uses json's {} and [] to imply struct/union and array. More
explicit information can be added later. For example, a command line
option can be introduced to print whether a key or value is struct
or union, name of a struct etc. This will however come at the expense
of duplicating info when, for example, printing an array of structs.
enums are printed as ints without their names.
Signed-off-by: Okash Khawaja <osk@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Provide a new Makefile.helpers in tools/bpf, in order to build and
install the man page for eBPF helpers. This Makefile is also included in
the one used to build bpftool documentation, so that it can be called
either on its own (cd tools/bpf && make -f Makefile.helpers) or from
bpftool directory (cd tools/bpf/bpftool && make doc, or
cd tools/bpf/bpftool/Documentation && make helpers).
Makefile.helpers is not added directly to bpftool to avoid changing its
Makefile too much (helpers are not 100% directly related with bpftool).
But the possibility to build the page from bpftool directory makes us
able to package the helpers man page with bpftool, and to install it
along with bpftool documentation, so that the doc for helpers becomes
easily available to developers through the "man" program.
Cc: linux-man@vger.kernel.org
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add map parameter to prog load which will allow reuse of existing
maps instead of creating new ones.
We need feature detection and compat code for reallocarray, since
it's not available in many libc versions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed. Use feature
detection to probe for existence of reallocarray.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpf_prog_load() is a very useful helper but it doesn't give us full
flexibility of modifying the BPF objects before loading. Open code
bpf_prog_load() in bpftool so we can add extra logic in following
commits.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Sometimes program section names don't match with libbpf's expectation.
In particular XDP's default section names differ between libbpf and
iproute2. Allow users to pass program type on command line. Name
the types like the libbpf expected section names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Extend the bpftool prog load command to also accept "dev"
parameter, which will allow us to load programs onto devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a new macro for printing more informative message than straight
usage() when parameters are missing, and use it for prog do_load().
Save the object and pin path argument to variables for clarity.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit adds a bash completion to the bpftool cgroup tree
command.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Describe cgroup tree command in the corresponding bpftool man page.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit introduces a new bpftool command: cgroup tree.
The idea is to iterate over the whole cgroup tree and print
all attached programs.
I was debugging a bpf/systemd issue, and found, that there is
no simple way to listen all bpf programs attached to cgroups.
I did master something in bash, but after some time got tired of it,
and decided, that adding a dedicated bpftool command could be
a better idea.
So, here it is:
$ sudo ./bpftool cgroup tree
CgroupPath
ID AttachType AttachFlags Name
/sys/fs/cgroup/system.slice/systemd-machined.service
18 ingress
17 egress
/sys/fs/cgroup/system.slice/systemd-logind.service
20 ingress
19 egress
/sys/fs/cgroup/system.slice/systemd-udevd.service
16 ingress
15 egress
/sys/fs/cgroup/system.slice/systemd-journald.service
14 ingress
13 egress
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-03
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Various improvements to bpftool and libbpf, that is, bpftool build
speed improvements, missing BPF program types added for detection
by section name, ability to load programs from '.text' section is
made to work again, and better bash completion handling, from Jakub.
2) Improvements to nfp JIT's map read handling which allows for optimizing
memcpy from map to packet, from Jiong.
3) New BPF sample is added which demonstrates XDP in combination with
bpf_perf_event_output() helper to sample packets on all CPUs, from Toke.
4) Add a new BPF kselftest case for tracking connect(2) BPF hooks
infrastructure in combination with TFO, from Andrey.
5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to
read payload from packet data in order to use it for benchmarking.
Also for '--action XDP_TX' option implement swapping of MAC addresses
to avoid drops on some hardware seen during testing, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove options (in getopt() sense, i.e. starting with a dash like
-n or --NAME) while parsing arguments for bash completions. This
allows us to refer to position-dependent parameters better, and
complete options at any point.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
--bpffs is not suggested by bash completions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Drop my author comments, those are from the early days of
bpftool and make little sense in tree, where we have quite
a few people contributing and git to attribute the work.
While at it bump some copyrights.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 4bfe3bd3cc35 ("tools/bpftool: use version from the kernel
source tree") added version to bpftool. The version used is
equal to the kernel version and obtained by running make kernelversion
against kernel source tree. Version is then communicated
to the sources with a command line define set in CFLAGS.
Use a simply expanded variable for the version, otherwise the
recursive make will run every time CFLAGS are used.
This brings the single-job compilation time for me from almost
16 sec down to less than 4 sec.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Remembering to close all descriptors and free memory may not seem
important in a user space tool like bpftool, but if we were to run
in batch mode the consumed resources start to add up quickly. Make
sure program load closes the libbpf object (which unloads and frees
it).
Fixes: 49a086c201a9 ("bpftool: implement prog load command")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
do_pin_fd() will already print out an error message if something
goes wrong. Printing another error is unnecessary and will break
JSON output, since error messages are full objects:
$ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a
{
"error": "can't pin the object (/sys/fs/bpf/a): File exists"
},{
"error": "failed to pin program"
}
Fixes: 49a086c201a9 ("bpftool: implement prog load command")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
BPF program load time is reported from the kernel relative to boot time.
If conversion to wall clock does not take nanosecond parts into account,
the load time reported by bpftool may differ by one second from run to
run. This means JSON object reported by bpftool for a program will
randomly change.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit b04df400c302 ("tools/bpftool: add perf subcommand")
introduced bpftool subcommand perf to query bpf program
kuprobe and tracepoint attachments.
The perf subcommand will first test whether bpf subcommand
BPF_TASK_FD_QUERY is supported in kernel or not. It does it
by opening a file with argv[0] and feeds the file descriptor
and current task pid to the kernel for querying.
Such an approach won't work if the argv[0] cannot be opened
successfully in the current directory. This is especially
true when bpftool is accessible through PATH env variable.
The error below reflects the open failure for file argv[0]
at home directory.
[yhs@localhost ~]$ which bpftool
/usr/local/sbin/bpftool
[yhs@localhost ~]$ bpftool perf
Error: perf_query_support: No such file or directory
To fix the issue, let us open root directory ("/")
which exists in every linux system. With the fix, the
error message will correctly reflect the permission issue.
[yhs@localhost ~]$ which bpftool
/usr/local/sbin/bpftool
[yhs@localhost ~]$ bpftool perf
Error: perf_query_support: Operation not permitted
HINT: non root or kernel doesn't support TASK_FD_QUERY
Fixes: b04df400c302 ("tools/bpftool: add perf subcommand")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.
Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
kprobe: trace.py '__x64_sys_nanosleep'
kretprobe: trace.py 'r::__x64_sys_nanosleep'
tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
uprobe: trace.py 'p:/home/yhs/a.out:main'
The bpftool command line and result:
$ bpftool perf
pid 21711 fd 5: prog_id 5 kprobe func __x64_sys_write offset 0
pid 21765 fd 5: prog_id 7 kretprobe func __x64_sys_nanosleep offset 0
pid 21767 fd 5: prog_id 8 tracepoint sys_enter_nanosleep
pid 21800 fd 5: prog_id 9 uprobe filename /home/yhs/a.out offset 1159
$ bpftool -j perf
[{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
{"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
{"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
{"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]
$ bpftool prog
5: kprobe name probe___x64_sys tag e495a0c82f2c7a8d gpl
loaded_at 2018-05-15T04:46:37-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 4
7: kprobe name probe___x64_sys tag f2fdee479a503abf gpl
loaded_at 2018-05-15T04:48:32-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 7
8: tracepoint name tracepoint__sys tag 5390badef2395fcf gpl
loaded_at 2018-05-15T04:48:48-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 8
9: kprobe name probe_main_1 tag 0a87bdc2e2953b6d gpl
loaded_at 2018-05-15T04:49:52-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 9
$ ps ax | grep "python ./trace.py"
21711 pts/0 T 0:03 python ./trace.py __x64_sys_write
21765 pts/0 S+ 0:00 python ./trace.py r::__x64_sys_nanosleep
21767 pts/2 S+ 0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
21800 pts/3 S+ 0:00 python ./trace.py p:/home/yhs/a.out:main
22374 pts/1 S+ 0:00 grep --color=auto python ./trace.py
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This splits up the contiguous JITed dump obtained via the bpf
system call into more relatable chunks for each function in
the program. If the kernel symbols corresponding to these are
known, they are printed in the header for each JIT image dump
otherwise the masked start address is printed.
Before applying this patch:
# bpftool prog dump jited id 1
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
72: push %rbp
73: mov %rsp,%rbp
...
dd: leaveq
de: retq
# bpftool -p prog dump jited id 1
[{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
},{
"pc": "0x72",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0xde",
"operation": "retq",
"operands": [null
]
}
]
After applying this patch:
# echo 0 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
0xffffffffc02c7000:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
0xffffffffc02cf000:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "0xffffffffc02c7000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "0xffffffffc02cf000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
# echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
bpf_prog_b811aab41a39ad3d_foo:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
bpf_prog_cf418ac8b67bebd9_F:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "bpf_prog_b811aab41a39ad3d_foo",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "bpf_prog_cf418ac8b67bebd9_F",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.
For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This adds the SOCKHASH map type to bpftools so that we get correct
pretty printing.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Ask the kernel to include sample time in each even instead of
reading the clock. This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Update .gitignore files.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.
Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Move the get_possible_cpus() function to shared code. No functional
changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Instead of spelling [hex] BYTES everywhere use DATA as keyword
for generalized value. This will help us keep the messages
concise when longer command are added in the future. It will
also be useful once BTF support comes. We will only have to
change the definition of DATA.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:
- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
for humans but even easier to process.
Example output:
# ./bpftool prog
41298: xdp tag a04f5eef06a7f555 dev foo
loaded_at 2018-04-18T17:19:47+0100 uid 0
xlated 16B not jited memlock 4096B
# ./bpftool prog -p
[{
"id": 41298,
"type": "xdp",
"tag": "a04f5eef06a7f555",
"gpl_compatible": false,
"dev": {
"ifindex": 14,
"ns_dev": 3,
"ns_inode": 4026531993,
"ifname": "foo"
},
"loaded_at": 1524068387,
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Previously, "Apr 18/17:19" would be used at both places.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Display the license "gpl" string in bpftool prog command, like:
# bpftool prog list
5: tracepoint name func tag 57cd311f2e27366b gpl
loaded_at Apr 26/09:37 uid 0
xlated 16B not jited memlock 4096B
# bpftool --json --pretty prog show
[{
"id": 5,
"type": "tracepoint",
"name": "func",
"tag": "57cd311f2e27366b",
"gpl_compatible": true,
"loaded_at": "Apr 26/09:37",
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
Yonghong Song
David S. Miller
Prashant Bhole
Quentin Monnet
Roman Gushchin
Taeung Song
YueHaibing
Jakub Kicinski
Okash Khawaja
Andrey Ignatov
Sean Young
Sandipan Das
John Fastabend
Sirio Balmelli
Jiri Olsa