| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When auto-generated BPF skeleton C code is included from C++ application, it
triggers compilation error due to void * being implicitly casted to whatever
target pointer type. This is supported by C, but not C++. To solve this
problem, add explicit casts, where necessary.
To ensure issues like this are captured going forward, add skeleton usage in
test_cpp test.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191226210253.3132060-1-andriin@fb.com
|
|
Currently, when bpftool cgroup show <path> has an error, no error
message is printed. This is confusing because the user may think the
result is empty.
Before the change:
$ bpftool cgroup show /sys/fs/cgroup
ID AttachType AttachFlags Name
$ echo $?
255
After the change:
$ ./bpftool cgroup show /sys/fs/cgroup
Error: can't query bpf programs attached to /sys/fs/cgroup: Operation
not permitted
v2: Rename check_query_cgroup_progs to cgroup_has_attached_progs
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191224011742.3714301-1-hechaol@fb.com
|
|
Move Kconfig-provided externs into custom .kconfig section. Add __kconfig into
bpf_helpers.h for user convenience. Update selftests accordingly.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191219002837.3074619-2-andriin@fb.com
|
|
Work-around what appears to be a bug in rst2man convertion tool, used to
create man pages out of reStructureText-formatted documents. If text line
starts with dot, rst2man will put it in resulting man file verbatim. This
seems to cause man tool to interpret it as a directive/command (e.g., `.bs`), and
subsequently not render entire line because it's unrecognized one.
Enclose '.xxx' words in extra formatting to work around.
Fixes: cb21ac588546 ("bpftool: Add gen subcommand manpage")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com
Link: https://lore.kernel.org/bpf/20191218221707.2552199-1-andriin@fb.com
|
|
Change format string referring to just single argument out of two available.
Some versions of libc can reject such format string.
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218214314.2403729-1-andriin@fb.com
|
|
Add bpftool-gen.rst describing skeleton on the high level. Also include
a small, but complete, example BPF app (BPF side, userspace side, generated
skeleton) in example section to demonstrate skeleton API and its usage.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-4-andriin@fb.com
|
|
Embed contents of BPF object file used for BPF skeleton generation inside
skeleton itself. This allows to keep BPF object file and its skeleton in sync
at all times, and simpifies skeleton instantiation.
Also switch existing selftests to not require BPF_EMBED_OBJ anymore.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-2-andriin@fb.com
|
|
The ident variable has already been declared at the top of the function
and doesn't need to be re-declared.
Fixes: 985ead416df39 ("bpftool: Add skeleton codegen command")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216112733.GA28366@Omicron
|
|
Add support for generation of mmap()-ed read-only view of libbpf-provided
extern variables. As externs are not supposed to be provided by user code
(that's what .data, .bss, and .rodata is for), don't mmap() it initially. Only
after skeleton load is performed, map .extern contents as read-only memory.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-4-andriin@fb.com
|
|
Add BASH completions for gen sub-command.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-18-andriin@fb.com
|
|
Add `bpftool gen skeleton` command, which takes in compiled BPF .o object file
and dumps a BPF skeleton struct and related code to work with that skeleton.
Skeleton itself is tailored to a specific structure of provided BPF object
file, containing accessors (just plain struct fields) for every map and
program, as well as dedicated space for bpf_links. If BPF program is using
global variables, corresponding structure definitions of compatible memory
layout are emitted as well, making it possible to initialize and subsequently
read/update global variables values using simple and clear C syntax for
accessing fields. This skeleton majorly improves usability of
opening/loading/attaching of BPF object, as well as interacting with it
throughout the lifetime of loaded BPF object.
Generated skeleton struct has the following structure:
struct <object-name> {
/* used by libbpf's skeleton API */
struct bpf_object_skeleton *skeleton;
/* bpf_object for libbpf APIs */
struct bpf_object *obj;
struct {
/* for every defined map in BPF object: */
struct bpf_map *<map-name>;
} maps;
struct {
/* for every program in BPF object: */
struct bpf_program *<program-name>;
} progs;
struct {
/* for every program in BPF object: */
struct bpf_link *<program-name>;
} links;
/* for every present global data section: */
struct <object-name>__<one of bss, data, or rodata> {
/* memory layout of corresponding data section,
* with every defined variable represented as a struct field
* with exactly the same type, but without const/volatile
* modifiers, e.g.:
*/
int *my_var_1;
...
} *<one of bss, data, or rodata>;
};
This provides great usability improvements:
- no need to look up maps and programs by name, instead just
my_obj->maps.my_map or my_obj->progs.my_prog would give necessary
bpf_map/bpf_program pointers, which user can pass to existing libbpf APIs;
- pre-defined places for bpf_links, which will be automatically populated for
program types that libbpf knows how to attach automatically (currently
tracepoints, kprobe/kretprobe, raw tracepoint and tracing programs). On
tearing down skeleton, all active bpf_links will be destroyed (meaning BPF
programs will be detached, if they are attached). For cases in which libbpf
doesn't know how to auto-attach BPF program, user can manually create link
after loading skeleton and they will be auto-detached on skeleton
destruction:
my_obj->links.my_fancy_prog = bpf_program__attach_cgroup_whatever(
my_obj->progs.my_fancy_prog, <whatever extra param);
- it's extremely easy and convenient to work with global data from userspace
now. Both for read-only and read/write variables, it's possible to
pre-initialize them before skeleton is loaded:
skel = my_obj__open(raw_embed_data);
my_obj->rodata->my_var = 123;
my_obj__load(skel); /* 123 will be initialization value for my_var */
After load, if kernel supports mmap() for BPF arrays, user can still read
(and write for .bss and .data) variables values, but at that point it will
be directly mmap()-ed to BPF array, backing global variables. This allows to
seamlessly exchange data with BPF side. From userspace program's POV, all
the pointers and memory contents stay the same, but mapped kernel memory
changes to point to created map.
If kernel doesn't yet support mmap() for BPF arrays, it's still possible to
use those data section structs to pre-initialize .bss, .data, and .rodata,
but after load their pointers will be reset to NULL, allowing user code to
gracefully handle this condition, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-14-andriin@fb.com
|
|
Few libbpf APIs are not public but currently exposed through libbpf.h to be
used by bpftool. Move them to libbpf_internal.h, where intent of being
non-stable and non-public is much more obvious.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-4-andriin@fb.com
|
|
This patch implements lookup by name for maps and changes the behavior of
lookups by tag to be consistent with prog subcommands. Similarly to
program subcommands, the show and dump commands will return all maps with
the given name (or tag), whereas other commands will error out if several
maps have the same name (resp. tag).
When a map has BTF info, it is dumped in JSON with available BTF info.
This patch requires that all matched maps have BTF info before switching
the output format to JSON.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/8de1c9f273860b3ea1680502928f4da2336b853e.1576263640.git.paul.chaignon@gmail.com
|
|
When working with frequently modified BPF programs, both the ID and the
tag may change. bpftool currently doesn't provide a "stable" way to match
such programs.
This patch implements lookup by name for programs. The show and dump
commands will return all programs with the given name, whereas other
commands will error out if several programs have the same name.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/b5fc1a5dcfaeb5f16fc80295cdaa606dd2d91534.1576263640.git.paul.chaignon@gmail.com
|
|
When several BPF programs have the same tag, bpftool matches only the
first (in ID order). This patch changes that behavior such that dump and
show commands return all matched programs. Commands that require a single
program (e.g., pin and attach) will error out if given a tag that matches
several. bpftool prog dump will also error out if file or visual are
given and several programs have the given tag.
In the case of the dump command, a program header is added before each
dump only if the tag matches several programs; this patch doesn't change
the output if a single program matches. The output when several
programs match thus looks as follows.
$ ./bpftool prog dump xlated tag 6deef7357e7b4530
3: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
4: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/fb1fe943202659a69cd21dd5b907c205af1e1e22.1576263640.git.paul.chaignon@gmail.com
|
|
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
|
|
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:
$ make -s tools/bpf O=/tmp/foo
Makefile:40: /tools/build/Makefile.feature: No such file or directory
Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.
Detected with test_bpftool_build.sh.
Fixes: 55d554f5d140 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
|
|
When building bpftool, a warning was introduced by commit a94364603610
("bpftool: Allow to read btf as raw data"), because the return value
from a call to 'read()' is ignored. Let's address it.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191119111706.22440-1-quentin.monnet@netronome.com
|
|
When compiling larger programs with bpf_asm, it's possible to
accidentally exceed jt/jf range, in which case it won't complain, but
rather silently emit a truncated offset, leading to a "happy debugging"
situation.
Add a warning to help detecting such issues. It could be made an error
instead, but this might break compilation of existing code (which might
be working by accident).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107100349.88976-1-iii@linux.ibm.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bpftool interface stays the same, but now it's possible
to run it over BTF raw data, like:
$ bpftool btf dump file /sys/kernel/btf/vmlinux
[1] INT '(anon)' size=4 bits_offset=0 nr_bits=32 encoding=(none)
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none)
[3] CONST '(anon)' type_id=2
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191024133025.10691-1-jolsa@kernel.org
|
|
LIBBPF_OPTS is implemented as a mix of field declaration and memset
+ assignment. This makes it neither variable declaration nor purely
statements, which is a problem, because you can't mix it with either
other variable declarations nor other function statements, because C90
compiler mode emits warning on mixing all that together.
This patch changes LIBBPF_OPTS into a strictly declaration of variable
and solves this problem, as can be seen in case of bpftool, which
previously would emit compiler warning, if done this way (LIBBPF_OPTS as
part of function variables declaration block).
This patch also renames LIBBPF_OPTS into DECLARE_LIBBPF_OPTS to follow
kernel convention for similar macros more closely.
v1->v2:
- rename LIBBPF_OPTS into DECLARE_LIBBPF_OPTS (Jakub Sitnicki).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022172100.3281465-1-andriin@fb.com
|
|
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of libbpf in 5e61f2707029 ("libbpf: stop enforcing kern_version,
populate it for users") non-LIBBPF_API __bpf_object__open_xattr() API
was removed from libbpf.h header. This broke bpftool, which relied on
that function. This patch fixes the build by switching to newly added
bpf_object__open_file() which provides the same capabilities, but is
official and future-proof API.
v1->v2:
- fix prog_type shadowing (Stanislav).
Fixes: 5e61f2707029 ("libbpf: stop enforcing kern_version, populate it for users")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191007225604.2006146-1-andriin@fb.com
|
|
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
|
|
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bpftool's Makefile, $(LIBS) includes $(LIBBPF), therefore the library
is used twice in the linking command. No need to have $(LIBBPF) (from
$^) on that command, let's do with "$(OBJS) $(LIBS)" (but move $(LIBBPF)
_before_ the -l flags in $(LIBS)).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When building "tools/bpf" from the top of the Linux repository, the
build system passes a value for the $(OUTPUT) Makefile variable to
tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in
generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool)
directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and
edits the Makefiles to ensure they are removed on "make clean". The use
of "rm" is also made consistent throughout those Makefiles (relies on
the $(RM) variable, use "--" to prevent interpreting
$(OUTPUT)/$(DESTDIR) as options.
v2:
- New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are a number of alternative "make" invocations that can be used to
compile bpftool. The following invocations are expected to work:
- through the kbuild system, from the top of the repository
(make tools/bpf)
- by telling make to change to the bpftool directory
(make -C tools/bpf/bpftool)
- by building the BPF tools from tools/
(cd tools && make bpf)
- by running make from bpftool directory
(cd tools/bpf/bpftool && make)
Additionally, setting the O or OUTPUT variables should tell the build
system to use a custom output path, for each of these alternatives.
The following patch fixes the following invocations:
$ make tools/bpf
$ make tools/bpf O=<dir>
$ make -C tools/bpf/bpftool OUTPUT=<dir>
$ make -C tools/bpf/bpftool O=<dir>
$ cd tools/ && make bpf O=<dir>
$ cd tools/bpf/bpftool && make OUTPUT=<dir>
$ cd tools/bpf/bpftool && make O=<dir>
After this commit, the build still fails for two variants when passing
the OUTPUT variable:
$ make tools/bpf OUTPUT=<dir>
$ cd tools/ && make bpf OUTPUT=<dir>
In order to remember and check what make invocations are supposed to
work, and to document the ones which do not, a new script is added to
the BPF selftests. Note that some invocations require the kernel to be
configured, so the script skips them if no .config file is found.
v2:
- In make_and_clean(), set $ERROR to 1 when "make" returns non-zero,
even if the binary was produced.
- Run "make clean" from the correct directory (bpf/ instead of bpftool/,
when relevant).
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Bpftool calls the toplevel Makefile to get the kernel version for the
sources it is built from. But when the utility is built from the top of
the kernel repository, it may dump the following error message for
certain architectures (including x86):
$ make tools/bpf
[...]
make[3]: *** [checkbin] Error 1
[...]
This does not prevent bpftool compilation, but may feel disconcerting.
The "checkbin" arch-dependent target is not supposed to be called for
target "kernelversion", which is a simple "echo" of the version number.
It turns out this is caused by the make invocation in tools/bpf/bpftool,
which attempts to find implicit rules to apply. Extract from debug
output:
Reading makefiles...
Reading makefile 'Makefile'...
Reading makefile 'scripts/Kbuild.include' (search path) (no ~ expansion)...
Reading makefile 'scripts/subarch.include' (search path) (no ~ expansion)...
Reading makefile 'arch/x86/Makefile' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kcov' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.gcc-plugins' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kasan' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.extrawarn' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.ubsan' (search path) (no ~ expansion)...
Updating makefiles....
Considering target file 'scripts/Makefile.ubsan'.
Looking for an implicit rule for 'scripts/Makefile.ubsan'.
Trying pattern rule with stem 'Makefile.ubsan'.
[...]
Trying pattern rule with stem 'Makefile.ubsan'.
Trying implicit prerequisite 'scripts/Makefile.ubsan.o'.
Looking for a rule with intermediate file 'scripts/Makefile.ubsan.o'.
Avoiding implicit rule recursion.
Trying pattern rule with stem 'Makefile.ubsan'.
Trying rule prerequisite 'prepare'.
Trying rule prerequisite 'FORCE'.
Found an implicit rule for 'scripts/Makefile.ubsan'.
Considering target file 'prepare'.
File 'prepare' does not exist.
Considering target file 'prepare0'.
File 'prepare0' does not exist.
Considering target file 'archprepare'.
File 'archprepare' does not exist.
Considering target file 'archheaders'.
File 'archheaders' does not exist.
Finished prerequisites of target file 'archheaders'.
Must remake target 'archheaders'.
Putting child 0x55976f4f6980 (archheaders) PID 31743 on the chain.
To avoid that, pass the -r and -R flags to eliminate the use of make
built-in rules (and while at it, built-in variables) when running
command "make kernelversion" from bpftool's Makefile.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Minor conflict in r8169, bug fix had two versions in net
and net-next, take the net-next hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new subcommand to freeze maps from user space.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When listing maps, read their "frozen" status from procfs, and tell if
maps are frozen.
As commit log for map freezing command mentions that the feature might
be extended with flags (e.g. for write-only instead of read-only) in the
future, use an integer and not a boolean for JSON output.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a "btf list" (alias: "btf show") subcommand to bpftool in order to
dump all BTF objects loaded on a system.
When running the command, hash tables are built in bpftool to retrieve
all the associations between BTF objects and BPF maps and programs. This
allows for printing all such associations when listing the BTF objects.
The command is added at the top of the subcommands for "bpftool btf", so
that typing only "bpftool btf" also comes down to listing the programs.
We could not have this with the previous command ("dump"), which
required a BTF object id, so it should not break any previous behaviour.
This also makes the "btf" command behaviour consistent with "prog" or
"map".
Bash completion is updated to use "bpftool btf" instead of "bpftool
prog" to list the BTF ids, as it looks more consistent.
Example output (plain):
# bpftool btf show
9: size 2989B prog_ids 21 map_ids 15
17: size 2847B prog_ids 36 map_ids 30,29,28
26: size 2847B
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf7fdf58384bb06df634f7531ca3a97e.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When showing metadata about a single program by invoking
"bpftool prog show PROG", the file descriptor referring to the program
is not closed before returning from the function. Let's close it.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some functions in bpftool have a "__printf()" format attributes to tell
the compiler they should expect printf()-like arguments. But because
these attributes are not used for the function prototypes in the header
files, the compiler does not run the checks everywhere the functions are
used, and some mistakes on format string and corresponding arguments
slipped in over time.
Let's move the __printf() attributes to the correct places.
Note: We add guards around the definition of GCC_VERSION in
tools/include/linux/compiler-gcc.h to prevent a conflict in jit_disasm.c
on GCC_VERSION from headers pulled via libbfd.
Fixes: c101189bc968 ("tools: bpftool: fix -Wmissing declaration warnings")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is one call to the p_err() function in detect_common_prefix()
where the message to print is passed directly as the first argument,
without using a format string. This is harmless, but may trigger
warnings if the "__printf()" attribute is used correctly for the p_err()
function. Let's fix it by using a "%s" format string.
Fixes: ba95c7452439 ("tools: bpftool: add "prog run" subcommand to test-run programs")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The format string passed to one call to the p_err() function in
query_flow_dissector() does not match the value that should be printed,
resulting in some garbage integer being printed instead of
strerror(errno) if /proc/self/ns/net cannot be open. Let's fix the
format string.
Fixes: 7f0c57fec80f ("bpftool: show flow_dissector attachment status")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The last argument passed to one call to the p_err() function is not
correct, it should be "*argv" instead of "**argv". This may lead to a
segmentation fault error if BTF id cannot be parsed correctly. Let's fix
this.
Fixes: c93cc69004dt ("bpftool: add ability to dump BTF types")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are some mismatches between format strings and arguments passed to
jsonw_printf() in the BTF dumper for bpftool, which seems harmless but
may result in warnings if the "__printf()" attribute is used correctly
for jsonw_printf(). Let's fix relevant format strings and type cast.
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The last argument passed to some calls to the p_err() functions is not
correct, it should be "*argv" instead of "**argv". This may lead to a
segmentation fault error if CPU IDs or indices from the command line
cannot be parsed correctly. Let's fix this.
Fixes: f412eed9dfde ("tools: bpftool: add simple perf event output reader")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since, new sub-command 'net attach/detach' has been added for
attaching XDP program on interface,
this commit documents usage and sample output of `net attach/detach`.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds bash-completion for new "net attach/detach"
subcommand for attaching XDP program on interface.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
By this commit, using `bpftool net detach`, the attached XDP prog can
be detached. Detaching the BPF prog will be done through libbpf
'bpf_set_link_xdp_fd' with the progfd set to -1.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
By this commit, using `bpftool net attach`, user can attach XDP prog on
interface. New type of enum 'net_attach_type' has been made, as stat ted at
cover-letter, the meaning of 'attach' is, prog will be attached on interface.
With 'overwrite' option at argument, attached XDP program could be replaced.
Added new helper 'net_parse_dev' to parse the network device at argument.
BPF prog will be attached through libbpf 'bpf_set_link_xdp_fd'.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compile bpftool with $(EXTRA_WARNINGS), as defined in
scripts/Makefile.include, and fix the new warnings produced.
Simply leave -Wswitch-enum out of the warning list, as we have several
switch-case structures where it is not desirable to process all values
of an enum.
Remove -Wshadow from the warnings we manually add to CFLAGS, as it is
handled in $(EXTRA_WARNINGS).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool requires libelf, and zlib for decompressing /proc/config.gz.
zlib is a transitive dependency via libelf, and became mandatory since
elfutils 0.165 (Jan 2016). The feature check of libelf is already done
in the elfdep target of tools/lib/bpf/Makefile, pulled in by bpftool via
a dependency on libbpf.a. Add a similar feature check for zlib.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
/proc/config has never existed as far as I can see, but /proc/config.gz
is present on Arch Linux. Add support for decompressing config.gz using
zlib which is a mandatory dependency of libelf anyway. Replace existing
stdio functions with gzFile operations since the latter transparently
handles uncompressed and gzip-compressed files.
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
David S. Miller
Andrii Nakryiko
Hechao Li
Paul Chaignon
Toke Høiland-Jørgensen
Quentin Monnet
Ilya Leoshkevich
Jiri Olsa
Shuah Khan
Daniel T. Lee
Peter Wu