| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
|
|
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by
exporting struct user_regs_struct instead of struct pt_regs which is
in-kernel only.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
|
|
Add support for extern variables, provided to BPF program by libbpf. Currently
the following extern variables are supported:
- LINUX_KERNEL_VERSION; version of a kernel in which BPF program is
executing, follows KERNEL_VERSION() macro convention, can be 4- and 8-byte
long;
- CONFIG_xxx values; a set of values of actual kernel config. Tristate,
boolean, strings, and integer values are supported.
Set of possible values is determined by declared type of extern variable.
Supported types of variables are:
- Tristate values. Are represented as `enum libbpf_tristate`. Accepted values
are **strictly** 'y', 'n', or 'm', which are represented as TRI_YES, TRI_NO,
or TRI_MODULE, respectively.
- Boolean values. Are represented as bool (_Bool) types. Accepted values are
'y' and 'n' only, turning into true/false values, respectively.
- Single-character values. Can be used both as a substritute for
bool/tristate, or as a small-range integer:
- 'y'/'n'/'m' are represented as is, as characters 'y', 'n', or 'm';
- integers in a range [-128, 127] or [0, 255] (depending on signedness of
char in target architecture) are recognized and represented with
respective values of char type.
- Strings. String values are declared as fixed-length char arrays. String of
up to that length will be accepted and put in first N bytes of char array,
with the rest of bytes zeroed out. If config string value is longer than
space alloted, it will be truncated and warning message emitted. Char array
is always zero terminated. String literals in config have to be enclosed in
double quotes, just like C-style string literals.
- Integers. 8-, 16-, 32-, and 64-bit integers are supported, both signed and
unsigned variants. Libbpf enforces parsed config value to be in the
supported range of corresponding integer type. Integers values in config can
be:
- decimal integers, with optional + and - signs;
- hexadecimal integers, prefixed with 0x or 0X;
- octal integers, starting with 0.
Config file itself is searched in /boot/config-$(uname -r) location with
fallback to /proc/config.gz, unless config path is specified explicitly
through bpf_object_open_opts' kernel_config_path option. Both gzipped and
plain text formats are supported. Libbpf adds explicit dependency on zlib
because of this, but this shouldn't be a problem, given libelf already depends
on zlib.
All detected extern variables, are put into a separate .extern internal map.
It, similarly to .rodata map, is marked as read-only from BPF program side, as
well as is frozen on load. This allows BPF verifier to track extern values as
constants and perform enhanced branch prediction and dead code elimination.
This can be relied upon for doing kernel version/feature detection and using
potentially unsupported field relocations or BPF helpers in a CO-RE-based BPF
program, while still having a single version of BPF program running on old and
new kernels. Selftests are validating this explicitly for unexisting BPF
helper.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-3-andriin@fb.com
|
|
To pick up the changes from:
22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Link: https://lkml.kernel.org/n/tip-bdbe4x02johhul05a03o27zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
2093dea3def9 ("drm/syncobj: extend syncobj query ability v3")
Which doesn't affect tooling, just silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-t1xqmjffo4rxdw395dsnu34j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the change in:
a0e047156cde ("drm/i915/gem: Make context persistence optional")
9cd20ef7803c ("drm/i915/perf: allow holding preemption on filtered ctx")
7831e9a965ea ("drm/i915/perf: Allow dynamic reconfiguration of the OA stream")
4f6ccc74a85c ("drm/i915: add support for perf configuration queries")
b8d49f28aa03 ("drm/i915/perf: introduce a versioning of the i915-perf uapi")
601734f7aabd ("drm/i915/tgl: s/ss/eu fuse reading support")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qwzjrgwj55y3g6rjdf9spkpr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
0acefef58451 ("Merge tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux")
49cb2fc42ce4 ("fork: extend clone3() to support setting a PID")
fa729c4df558 ("clone3: validate stack arguments")
b612e5df4587 ("clone3: add CLONE_CLEAR_SIGHAND")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.
The CLONE_CLEAR_SIGHAND one will be used in tools/perf/trace/beauty/clone.c
in a followup patch to show that string when this bit is set in the
syscall arg. Keeping a copy of this file allows us to build this in
older systems and have the binary support printing that flag whenever
that system gets its kernel updated to one where this feature is
present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nprqsvvzbhzoy64cbvos6c5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from:
14edff88315a Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
a4b28f5c6798 Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next
58772e9a3db7 ("KVM: arm64: Provide VCPU attributes for stolen time")
da345174ceca ("KVM: arm/arm64: Allow user injection of external data aborts")
c726200dd106 ("KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace")
efe5ddcae496 ("KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
Some are also include by:
tools/perf/arch/x86/util/kvm-stat.c
tools/perf/arch/powerpc/util/kvm-stat.c
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steven Price <steven.price@arm.com>
Link: https://lkml.kernel.org/n/tip-qrjdudhq25mk5bfnhveofbm4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
3ad2522c64cf ("statx: define STATX_ATTR_VERITY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h'
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
At some point we wi'll beautify structs passed in pointers to syscalls
and then we'll need to have tables for these defines, for now update the
file to silence the warning as this file is used for doing this type of
number -> string translations for other defines found in these file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-thcy60dpry5qrpn7nmc58bwg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
b103fb7653ff ("fscrypt: add support for IV_INO_LBLK_64 policies")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-cgfz3ffe07pw2m8hmstvkudl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
|
|
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
|
|
Add kernel AUX area sampling definitions, which brings perf_event.h into
line with the kernel version.
New sample type PERF_SAMPLE_AUX requests a sample of the AUX area
buffer. New perf_event_attr member 'aux_sample_size' specifies the
desired size of the sample.
Also add support for parsing samples containing AUX area data i.e.
PERF_SAMPLE_AUX.
Committer notes:
I squashed the first two patches in this series to avoid breaking
automatic bisection, i.e. after applying only the original first patch
in this series we would have:
# perf test -v parsing
26: Sample parsing :
--- start ---
test child forked, pid 17018
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
test child finished with -1
---- end ----
Sample parsing: FAILED!
#
With the two paches combined:
# perf test parsing
26: Sample parsing : Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add ability to memory-map contents of BPF array map. This is extremely useful
for working with BPF global data from userspace programs. It allows to avoid
typical bpf_map_{lookup,update}_elem operations, improving both performance
and usability.
There had to be special considerations for map freezing, to avoid having
writable memory view into a frozen map. To solve this issue, map freezing and
mmap-ing is happening under mutex now:
- if map is already frozen, no writable mapping is allowed;
- if map has writable memory mappings active (accounted in map->writecnt),
map freezing will keep failing with -EBUSY;
- once number of writable memory mappings drops to zero, map freezing can be
performed again.
Only non-per-CPU plain arrays are supported right now. Maps with spinlocks
can't be memory mapped either.
For BPF_F_MMAPABLE array, memory allocation has to be done through vmalloc()
to be mmap()'able. We also need to make sure that array data memory is
page-sized and page-aligned, so we over-allocate memory in such a way that
struct bpf_array is at the end of a single page of memory with array->value
being aligned with the start of the second page. On deallocation we need to
accomodate this memory arrangement to free vmalloc()'ed memory correctly.
One important consideration regarding how memory-mapping subsystem functions.
Memory-mapping subsystem provides few optional callbacks, among them open()
and close(). close() is called for each memory region that is unmapped, so
that users can decrease their reference counters and free up resources, if
necessary. open() is *almost* symmetrical: it's called for each memory region
that is being mapped, **except** the very first one. So bpf_map_mmap does
initial refcnt bump, while open() will do any extra ones after that. Thus
number of close() calls is equal to number of open() calls plus one more.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-4-andriin@fb.com
|
|
Extend libbpf api to pass attach_prog_fd into bpf_object__open.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-19-ast@kernel.org
|
|
Teach libbpf to recognize tracing programs types and attach them to
fentry/fexit.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-7-ast@kernel.org
|
|
Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.
* for-linus: (942 commits)
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linux 5.4-rc5
riscv: cleanup do_trap_break
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.
However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.
Lets fix BPF side by making use of recently added 3d7081822f7f ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.
The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via 00c42373d397 ("x86-64: add warning for
non-canonical user access address dereferences").
Fixes: a5e8c07059d0 ("bpf: add bpf_probe_read_str helper")
Fixes: 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
|
|
Cleanup libbpf from expected_attach_type == attach_btf_id hack
and introduce BPF_PROG_TYPE_TRACING.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191030223212.953010-3-ast@kernel.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to commit message in the original commit c75b1d9421f8 ("fs:
add fcntl() interface for setting/getting write life time hints"),
as well as userspace library[1] and man page update[2], R/W hint constants
are intended to have RWH_* prefix. However, RWF_WRITE_LIFE_NOT_SET retained
"RWF_*" prefix used in the early versions of the proposed patch set[3].
Rename it and provide the old name as a synonym for the new one
for backward compatibility.
[1] https://github.com/axboe/fio/commit/bd553af6c849
[2] https://github.com/mkerrisk/man-pages/commit/580082a186fd
[3] https://www.mail-archive.com/linux-block@vger.kernel.org/msg09638.html
Fixes: c75b1d9421f8 ("fs: add fcntl() interface for setting/getting write life time hints")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sync if_link.h into tools/ and get rid of annoying libbpf Makefile warning.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-2-andriin@fb.com
|
|
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.
In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org
|
|
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org
|
|
To get the changes in:
78f6face5af3 ("sched: add kernel-doc for struct clone_args")
f14c234b4bc5 ("clone3: switch to copy_struct_from_user()")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xqruu8wohwlbc57udg1g0xzx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
344c6c804703 ("KVM/Hyper-V: Add new KVM capability KVM_CAP_HYPERV_DIRECT_TLBFLUSH")
dee04eee9182 ("KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface")
These trigger the rebuild of this object:
CC /tmp/build/perf/trace/beauty/ioctl.o
But do not result in any change in tooling, as the additions are not
being used in any table generatator.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lkml.kernel.org/n/tip-d1v48a0qfoe98u5v9tn3mu5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Various small fixes to BPF helper documentation comments, enabling
automatic header generation with a list of BPF helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To pick the changes in:
200824f55eef ("KVM: s390: Disallow invalid bits in kvm_valid_regs and kvm_dirty_regs")
4a53d99dd0c2 ("KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode")
7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason")
92f35b751c71 ("KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/n/tip-akuugvvjxte26kzv23zp5d2z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
78a1b96bcf7a ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl")
23c688b54016 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
5dae460c2292 ("fscrypt: v2 encryption policy support")
5a7e29924dac ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl")
b1c0ec3599f4 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
22d94f493bfb ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
3b6df59bc4d2 ("fscrypt: use FSCRYPT_* definitions, not FS_*")
2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants")
7af0ab0d3aab ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>")
That don't trigger any changes in tooling, as it so far is used only
for:
$ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex=
tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
$
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from:
4ed3350539aa ("USB: usbfs: Add a capability flag for runtime suspend")
7794f486ed0b ("usbfs: Add ioctls for runtime power management")
This triggers these changes in the kernel sources, automagically
supporting these new ioctls in the 'perf trace' beautifiers.
Soon this will be used in things like filter expressions for tracepoints
in 'perf record', 'perf trace', 'perf top', i.e. filter expressions will
do a lookup to turn things like USBDEVFS_WAIT_FOR_RESUME into _IO('U',
35) before associating the tracepoint expression to tracepoint perf
event.
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before
$ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h
$ git diff
diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h
index 78efe870c2b7..cf525cddeb94 100644
--- a/tools/include/uapi/linux/usbdevice_fs.h
+++ b/tools/include/uapi/linux/usbdevice_fs.h
@@ -158,6 +158,7 @@ struct usbdevfs_hub_portinfo {
#define USBDEVFS_CAP_MMAP 0x20
#define USBDEVFS_CAP_DROP_PRIVILEGES 0x40
#define USBDEVFS_CAP_CONNINFO_EX 0x80
+#define USBDEVFS_CAP_SUSPEND 0x100
/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
@@ -223,5 +224,8 @@ struct usbdevfs_streams {
* extending size of the data returned.
*/
#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len)
+#define USBDEVFS_FORBID_SUSPEND _IO('U', 33)
+#define USBDEVFS_ALLOW_SUSPEND _IO('U', 34)
+#define USBDEVFS_WAIT_FOR_RESUME _IO('U', 35)
#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after
$ diff -u before after
--- before 2019-09-27 11:41:50.634867620 -0300
+++ after 2019-09-27 11:42:07.453102978 -0300
@@ -24,6 +24,9 @@
[30] = "DROP_PRIVILEGES",
[31] = "GET_SPEED",
[32] = "CONNINFO_EX",
+ [33] = "FORBID_SUSPEND",
+ [34] = "ALLOW_SUSPEND",
+ [35] = "WAIT_FOR_RESUME",
[3] = "RESETEP",
[4] = "SETINTERFACE",
[5] = "SETCONFIGURATION",
$
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h'
diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x1rb109b9nfi7pukota82xhj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
9c276cc65a58 ("mm: introduce MADV_COLD")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ git diff
diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h
index 63b1f506ea67..c160a5354eb6 100644
--- a/tools/include/uapi/asm-generic/mman-common.h
+++ b/tools/include/uapi/asm-generic/mman-common.h
@@ -67,6 +67,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2019-09-27 11:29:43.346320100 -0300
+++ after 2019-09-27 11:30:03.838570439 -0300
@@ -16,6 +16,8 @@
[17] = "DODUMP",
[18] = "WIPEONFORK",
[19] = "KEEPONFORK",
+ [20] = "COLD",
+ [21] = "PAGEOUT",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-n40y6c4sa49p29q6sl8w3ufx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the change in:
bf73fc0fa9cf ("drm/i915: Show support for accurate sw PMU busyness tracking")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o651nt7vpz93tu3nmx4f3xql@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull more perf updates from Ingo Molnar:
"The only kernel change is comment typo fixes.
The rest is mostly tooling fixes, but also new vendor event additions
and updates, a bigger libperf/libtraceevent library and a header files
reorganization that came in a bit late"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
perf unwind: Fix libunwind build failure on i386 systems
perf parser: Remove needless include directives
perf build: Add detection of java-11-openjdk-devel package
perf jvmti: Include JVMTI support for s390
perf vendor events: Remove P8 HW events which are not supported
perf evlist: Fix access of freed id arrays
perf stat: Fix free memory access / memory leaks in metrics
perf tools: Replace needless mmap.h with what is needed, event.h
perf evsel: Move config terms to a separate header
perf evlist: Remove unused perf_evlist__fprintf() method
perf evsel: Introduce evsel_fprintf.h
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
perf copyfile: Move copyfile routines to separate files
libperf: Add perf_evlist__poll() function
libperf: Add perf_evlist__add_pollfd() function
libperf: Add perf_evlist__alloc_pollfd() function
libperf: Add libperf_init() call to the tests
libperf: Merge libperf_set_print() into libperf_init()
libperf: Add libperf dependency for tests targets
libperf: Use sys/types.h to get ssize_t, not unistd.h
...
|
|
Change the definition of the RBCOMPUTE function. The propagate callback
repeatedly calls RBCOMPUTE as it moves from leaf to root. it wants to
stop recomputing once the augmented subtree information doesn't change.
This was previously checked using the == operator, but that only works
when the augmented subtree information is a scalar field. This commit
modifies the RBCOMPUTE function so that it now sets the augmented subtree
information instead of returning it, and returns a boolean value
indicating if the propagate callback should stop.
The motivation for this change is that I want to introduce augmented
rbtree uses where the augmented data for the subtree is a struct instead
of a scalar.
Link: http://lkml.kernel.org/r/20190703040156.56953-4-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks
for the case where the augmented value is a scalar whose definition
follows a max(f(node)) pattern. This actually covers all present uses of
RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the
various RBCOMPUTE function definitions.
[walken@google.com: fix mm/vmalloc.c]
Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com
[walken@google.com: re-add check to check_augmented()]
Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com
Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "make RB_DECLARE_CALLBACKS more generic", v3.
These changes are intended to make the RB_DECLARE_CALLBACKS macro more
generic (allowing the aubmented subtree information to be a struct instead
of a scalar).
I have verified the compiled lib/interval_tree.o and mm/mmap.o files to
check that they didn't change. This held as expected for interval_tree.o;
mmap.o did have some changes which could be reverted by marking
__vma_link_rb as noinline. I did not add such a change to the patchset; I
felt it was reasonable enough to leave the inlining decision up to the
compiler.
This patch (of 3):
Add a short comment summarizing the arguments to RB_DECLARE_CALLBACKS.
The arguments are also now capitalized. This copies the style of the
INTERVAL_TREE_DEFINE macro.
No functional changes in this commit, only comments and capitalization.
Link: http://lkml.kernel.org/r/20190703040156.56953-2-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.
This commit takes the changes applied to the include/linux/ and lib/
rbtree files in 9f973cb38088 ("lib/rbtree: avoid generating code twice
for the cached versions"), and applies these to the
tools/include/linux/ and tools/lib/ files as well to keep them
synchronized.
Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have a direct fprintf() call in the header, so we need stdio.h
include, otherwise it could fail compilation if there's no prior stdio.h
include directive.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-8hvjgh24olfsa4non0a3ohnq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull f2fs updates from Jaegeuk Kim:
"In this round, we introduced casefolding support in f2fs, and fixed
various bugs in individual features such as IO alignment,
checkpoint=disable, quota, and swapfile.
Enhancement:
- support casefolding w/ enhancement in ext4
- support fiemap for directory
- support FS_IO_GET|SET_FSLABEL
Bug fix:
- fix IO stuck during checkpoint=disable
- avoid infinite GC loop
- fix panic/overflow related to IO alignment feature
- fix livelock in swap file
- fix discard command leak
- disallow dio for atomic_write"
* tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: add a condition to detect overflow in f2fs_ioc_gc_range()
f2fs: fix to add missing F2FS_IO_ALIGNED() condition
f2fs: fix to fallback to buffered IO in IO aligned mode
f2fs: fix to handle error path correctly in f2fs_map_blocks
f2fs: fix extent corrupotion during directIO in LFS mode
f2fs: check all the data segments against all node ones
f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITY
f2fs: fix inode rwsem regression
f2fs: fix to avoid accessing uninitialized field of inode page in is_alive()
f2fs: avoid infinite GC loop due to stale atomic files
f2fs: Fix indefinite loop in f2fs_gc()
f2fs: convert inline_data in prior to i_size_write
f2fs: fix error path of f2fs_convert_inline_page()
f2fs: add missing documents of reserve_root/resuid/resgid
f2fs: fix flushing node pages when checkpoint is disabled
f2fs: enhance f2fs_is_checkpoint_ready()'s readability
f2fs: clean up __bio_alloc()'s parameter
f2fs: fix wrong error injection path in inc_valid_block_count()
f2fs: fix to writeout dirty inode during node flush
f2fs: optimize case-insensitive lookups
...
|
|
To pick the change from:
78e05972c5e6 ("ipc: fix semtimedop for generic 32-bit architectures")
Which doesn't trigger any change in tooling and silences this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hpnjuyjzoudltqe7dvbokqdt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
that introduces prctl options that then automagically gets catched by
the prctl cmd table generator, and thus supported in the 'perf trace'
prctl beautifier for the 'option' argument:
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
--- before 2019-09-20 14:38:41.386720870 -0300
+++ after 2019-09-20 14:40:02.583990802 -0300
@@ -49,6 +49,8 @@
[52] = "GET_SPECULATION_CTRL",
[53] = "SET_SPECULATION_CTRL",
[54] = "PAC_RESET_KEYS",
+ [55] = "SET_TAGGED_ADDR_CTRL",
+ [56] = "GET_TAGGED_ADDR_CTRL",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
$
For now just the translation of 55 and 56 to the respecting strings are
done, more work needed to allow for filters to be used using strings.
This, for instance, already works:
# perf record -e syscalls:sys_enter_close --filter="fd==4"
# perf script | head -5
gpm 1018 [006] 21327.171436: syscalls:sys_enter_close: fd: 0x00000004
gpm 1018 [006] 21329.171583: syscalls:sys_enter_close: fd: 0x00000004
bash 4882 [002] 21330.785496: syscalls:sys_enter_close: fd: 0x00000004
bash 20672 [001] 21330.785719: syscalls:sys_enter_close: fd: 0x00000004
find 20672 [001] 21330.789082: syscalls:sys_enter_close: fd: 0x00000004
# perf record -e syscalls:sys_enter_close --filter="fd>=4"
^C[ perf record: Woken up 1 times to write data ]
# perf script | head -5
gpm 1018 [005] 21401.178501: syscalls:sys_enter_close: fd: 0x00000004
gsd-housekeepin 2287 [006] 21402.225365: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.226234: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.227255: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.228088: syscalls:sys_enter_close: fd: 0x0000000b
#
Being able to pass something like:
# perf record -e syscalls:sys_enter_prctl --filter="option=*TAGGED_ADDR*"
Should be easy enough, first using tracepoint filters, then via the
augmented_raw_syscalls.c BPF method.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-y8u8kvflooyo9x0if1g3jska@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
|
|
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.
The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.
Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
sync bpf.h from kernel/ to tools/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
David S. Miller
Andrey Ignatov
Björn Töpel
Andrii Nakryiko
Arnaldo Carvalho de Melo
Linus Torvalds
Adrian Hunter
Alexei Starovoitov
Jens Axboe
Daniel Borkmann
Eugene Syromiatnikov
Michel Lespinasse
Jiri Olsa
Kevin Laatz
Ingo Molnar