| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
|
|
Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT
attach types.
Try to connect(2) to specified IP:port and test that:
* remote IP:port pair is overridden;
* local end of connection is bound to specified IP.
All combinations of IPv4/IPv6 and TCP/UDP are tested.
Example:
# tcpdump -pn -i lo -w connect.pcap 2>/dev/null &
[1] 478
# strace -qqf -e connect -o connect.trace ./test_sock_addr.sh
Wait for testing IPv4/IPv6 to become available ... OK
Load bind4 with invalid type (can pollute stderr) ... REJECTED
Load bind4 with valid type ... OK
Attach bind4 with invalid type ... REJECTED
Attach bind4 with valid type ... OK
Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \
program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (b7) r2 = 23569
1: (63) *(u32 *)(r1 +24) = r2
2: (b7) r2 = 16777343
3: (63) *(u32 *)(r1 +4) = r2
invalid bpf_context access off=4 size=4
[ 1518.404609] random: crng init done
libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/connect4'
libbpf: failed to load object './connect4_prog.o'
... REJECTED
Load connect4 with valid type ... OK
Attach connect4 with invalid type ... REJECTED
Attach connect4 with valid type ... OK
Test case #1 (IPv4/TCP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Requested: connect(192.168.1.254, 4040) from (*, *) ..
Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068)
Test case #2 (IPv4/UDP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Requested: connect(192.168.1.254, 4040) from (*, *) ..
Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447)
Load bind6 with invalid type (can pollute stderr) ... REJECTED
Load bind6 with valid type ... OK
Attach bind6 with invalid type ... REJECTED
Attach bind6 with valid type ... OK
Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \
program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (b7) r6 = 0
1: (63) *(u32 *)(r1 +12) = r6
invalid bpf_context access off=12 size=4
libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/connect6'
libbpf: failed to load object './connect6_prog.o'
... REJECTED
Load connect6 with valid type ... OK
Attach connect6 with invalid type ... REJECTED
Attach connect6 with valid type ... OK
Test case #3 (IPv6/TCP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
Actual: connect(::1, 6666) from (::6, 37458)
Test case #4 (IPv6/UDP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
Actual: connect(::1, 6666) from (::6, 39315)
### SUCCESS
# egrep 'connect\(.*AF_INET' connect.trace | \
> egrep -vw 'htons\(1025\)' | fold -b -s -w 72
502 connect(7, {sa_family=AF_INET, sin_port=htons(4040),
sin_addr=inet_addr("192.168.1.254")}, 128) = 0
502 connect(8, {sa_family=AF_INET, sin_port=htons(4040),
sin_addr=inet_addr("192.168.1.254")}, 128) = 0
502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060),
inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060),
inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
# fg
tcpdump -pn -i lo -w connect.pcap 2> /dev/null
# tcpdump -r connect.pcap -n tcp | cut -c 1-72
reading from file connect.pcap, link-type EN10MB (Ethernet)
17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333
17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112
17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w
17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1,
17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win
17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac
17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt
17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add selftest to work with bpf_sock_addr context from
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs.
Try to bind(2) on IP:port and apply:
* loads to make sure context can be read correctly, including narrow
loads (byte, half) for IP and full-size loads (word) for all fields;
* stores to those fields allowed by verifier.
All combination from IPv4/IPv6 and TCP/UDP are tested.
Both scenarios are tested:
* valid programs can be loaded and attached;
* invalid programs can be neither loaded nor attached.
Test passes when expected data can be read from context in the
BPF-program, and after the call to bind(2) socket is bound to IP:port
pair that was written by BPF-program to the context.
Example:
# ./test_sock_addr
Attached bind4 program.
Test case #1 (IPv4/TCP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Test case #2 (IPv4/UDP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Attached bind6 program.
Test case #3 (IPv6/TCP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Test case #4 (IPv6/UDP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
### SUCCESS
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Support setting `expected_attach_type` at prog load time in both
`bpf/bpf.h` and `bpf/libbpf.h`.
Since both headers already have API to load programs, new functions are
added not to break backward compatibility for existing ones:
* `bpf_load_program_xattr()` is added to `bpf/bpf.h`;
* `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`.
Both new functions accept structures, `struct bpf_load_program_attr` and
`struct bpf_prog_load_attr` correspondingly, where new fields can be
added in the future w/o changing the API.
Standard `_xattr` suffix is used to name the new API functions.
Since `bpf_load_program_name()` is not used as heavily as
`bpf_load_program()`, it was removed in favor of more generic
`bpf_load_program_xattr()`.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Starting with recent GCC 8 builds, objtool and perf fail to build with
the following error:
../str_error_r.c: In function ‘str_error_r’:
../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict]
snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err);
The code seems harmless, but there's probably no benefit in printing the
'buf' pointer in this situation anyway, so just remove it to make GCC
happy.
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f9f.
"text" is only initialized inside the if statement so only print debug
info there.
Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call")
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Adding check on failed attempt to parse the address and skip the line
parsing early in that case.
The address can be replaced with '(null)' string in case user don't have
enough permissions, like:
$ cat /proc/kallsyms
(null) A irq_stack_union
(null) A __per_cpu_start
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding sysfs__read_xll function to be able to read sysfs files with hex
numbers in, which do not have 0x prefix.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding filename__read_xll function to be able to read files with hex
numbers in, which do not have 0x prefix.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-02-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Two fixes for BPF sockmap in order to break up circular map references
from programs attached to sockmap, and detaching related sockets in
case of socket close() event. For the latter we get rid of the
smap_state_change() and plug into ULP infrastructure, which will later
also be used for additional features anyway such as TX hooks. For the
second issue, dependency chain is broken up via map release callback
to free parse/verdict programs, all from John.
2) Fix a libbpf relocation issue that was found while implementing XDP
support for Suricata project. Issue was that when clang was invoked
with default target instead of bpf target, then various other e.g.
debugging relevant sections are added to the ELF file that contained
relocation entries pointing to non-BPF related sections which libbpf
trips over instead of skipping them. Test cases for libbpf are added
as well, from Jesper.
3) Various misc fixes for bpftool and one for libbpf: a small addition
to libbpf to make sure it recognizes all standard section prefixes.
Then, the Makefile in bpftool/Documentation is improved to explicitly
check for rst2man being installed on the system as we otherwise risk
installing empty man pages; the man page for bpftool-map is corrected
and a set of missing bash completions added in order to avoid shipping
bpftool where the completions are only partially working, from Quentin.
4) Fix applying the relocation to immediate load instructions in the
nfp JIT which were missing a shift, from Jakub.
5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
in this case; and explicitly delete the veth devices in the two tests
test_xdp_{meta,redirect}.sh before dismantling the netnses as when
selftests are run in batch mode, then workqueue to handle destruction
might not have finished yet and thus veth creation in next test under
same dev name would fail, from Yonghong.
6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
an insmod, and fallback to modprobe. Especially the latter is useful
when having a device under test that has the modules installed instead,
from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
V3: More generic skipping of relo-section (suggested by Daniel)
If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.
The BPF ELF loader library libbpf fails when loading files with these
sections. The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.
The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().
This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.
As suggested by Daniel. To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object. Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR). Use this check to also skip irrelevant relo-sections.
Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
While debugging a bpf ELF loading issue, I needed to correlate the
ELF section number with the failed relocation section reference.
Thus, add section numbers/index to the pr_debug.
In debug mode, also print section that were skipped. This helped
me identify that a section (.eh_frame) was skipped, and this was
the reason the relocation section (.rel.eh_frame) could not find
that section number.
The section numbers corresponds to the readelf tools Section Headers [Nr].
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
It seems that the type guessing feature for libbpf, based on the name of
the ELF section the program is located in, was inspired from
samples/bpf/prog_load.c, which was not used by any sample for loading
programs of certain types such as TC actions and classifiers, or
LWT-related types. As a consequence, libbpf is not able to guess the
type of such programs and to load them automatically if type is not
provided to the `bpf_load_prog()` function.
Add ELF section names associated to those eBPF program types so that
they can be loaded with e.g. bpftool as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Merge misc updates from Andrew Morton:
- kasan updates
- procfs
- lib/bitmap updates
- other lib/ updates
- checkpatch tweaks
- rapidio
- ubsan
- pipe fixes and cleanups
- lots of other misc bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
Documentation/sysctl/user.txt: fix typo
MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
MAINTAINERS: update various PALM patterns
MAINTAINERS: update "ARM/OXNAS platform support" patterns
MAINTAINERS: update Cortina/Gemini patterns
MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern
MAINTAINERS: remove ANDROID ION pattern
mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors
mm: docs: fix parameter names mismatch
mm: docs: fixup punctuation
pipe: read buffer limits atomically
pipe: simplify round_pipe_size()
pipe: reject F_SETPIPE_SZ with size over UINT_MAX
pipe: fix off-by-one error when checking buffer limits
pipe: actually allow root to exceed the pipe buffer limits
pipe, sysctl: remove pipe_proc_fn()
pipe, sysctl: drop 'min' parameter from pipe-max-size converter
kasan: rework Kconfig settings
crash_dump: is_kdump_kernel can be boolean
kernel/mutex: mutex_is_locked can be boolean
...
|
|
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).
Implement a direct join (find a nonzero bit on the incrementally built
join). Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).
For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1]. No impact on memory
usage. Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].
[1] Approximate benchmark code:
```
unsigned long src1p[nr_cpumask_longs] = {pattern1};
unsigned long src2p[nr_cpumask_longs] = {pattern2};
for (/*a bunch of repetitions*/) {
for (int n = -1; n <= nr_cpu_ids; ++n) {
asm volatile("" : "+rm"(src1p)); // prevent any optimization
asm volatile("" : "+rm"(src2p));
unsigned long result = cpumask_next_and(n, src1p, src2p);
asm volatile("" : "+rm"(result));
}
}
```
Results:
pattern1 pattern2 time_before/time_after
0x0000ffff 0x0000ffff 1.65
0x0000ffff 0x00005555 2.24
0x0000ffff 0x00001111 2.94
0x0000ffff 0x00000000 14.0
0x00005555 0x0000ffff 1.67
0x00005555 0x00005555 1.71
0x00005555 0x00001111 1.90
0x00005555 0x00000000 6.58
0x00001111 0x0000ffff 1.46
0x00001111 0x00005555 1.49
0x00001111 0x00001111 1.45
0x00001111 0x00000000 3.10
0x00000000 0x0000ffff 1.18
0x00000000 0x00005555 1.18
0x00000000 0x00001111 1.17
0x00000000 0x00000000 1.25
-----------------------------
geo.mean 2.06
[2] test_find_next_bit, X86 (skylake)
[ 3913.477422] Start testing find_bit() with random-filled bitmap
[ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations
[ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations
[ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations
[ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations
[ 3913.480216] Start testing find_next_and_bit() with random-filled
bitmap
[ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations
[ 3913.481075] Start testing find_bit() with sparse bitmap
[ 3913.481078] find_next_bit: 2536 cycles, 66 iterations
[ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations
[ 3913.481255] find_last_bit: 2006 cycles, 66 iterations
[ 3913.481265] find_first_bit: 17488 cycles, 66 iterations
[ 3913.481266] Start testing find_next_and_bit() with sparse bitmap
[ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations
[3] test_find_next_bit, arm (v7 odroid XU3).
[ 267.206928] Start testing find_bit() with random-filled bitmap
[ 267.214752] find_next_bit: 4474 cycles, 16419 iterations
[ 267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations
[ 267.229294] find_last_bit: 4209 cycles, 16419 iterations
[ 267.279131] find_first_bit: 1032991 cycles, 16420 iterations
[ 267.286265] Start testing find_next_and_bit() with random-filled
bitmap
[ 267.302386] find_next_and_bit: 2290 cycles, 8140 iterations
[ 267.309422] Start testing find_bit() with sparse bitmap
[ 267.316054] find_next_bit: 191 cycles, 66 iterations
[ 267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations
[ 267.329803] find_last_bit: 84 cycles, 66 iterations
[ 267.336169] find_first_bit: 4118 cycles, 66 iterations
[ 267.342627] Start testing find_next_and_bit() with sparse bitmap
[ 267.356919] find_next_and_bit: 91 cycles, 1 iterations
[courbet@google.com: v6]
Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com
[geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>]
Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org
Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com
Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use a separate fd set for select()-s exception fds param to fix the
following gcc warning:
pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict]
select(1, &in, NULL, &in, NULL);
^~~ ~~~
Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Parse netlink ext attribute to get the error message returned by
the card. Code is partially take from libnl.
We add netlink.h to the uapi include of tools. And we need to
avoid include of userspace netlink header to have a successful
build of sample so nlattr.h has a define to avoid
the inclusion. Using a direct define could have been an issue
as NLMSGERR_ATTR_MAX can change in the future.
We also define SOL_NETLINK if not defined to avoid to have to
copy socket.h for a fixed value.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Most of the code is taken from set_link_xdp_fd() in bpf_load.c and
slightly modified to be library compliant.
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The headers are necessary for libbpf compilation on system with older
version of the headers.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
|
|
If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.
Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently the FILTER_TRIVIAL_FALSE case has a missing break statement,
if the trivial type is FALSE, it will also run into the TRUE case, and
always be skipped as the TRUE statement will continue the loop on the
inverse condition of the FALSE statement.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org
Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add UL suffix to MISSING_EVENTS since ints shouldn't be left shifted by 31.
Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20171016165542.13038-4-mikesart@fastmail.com
Link: http://lkml.kernel.org/r/20180112004822.829533885@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It makes the code clearer and less error prone.
clearer:
- less code
- the code is now using the same format to create strings dynamically
less error prone:
- no magic number +2 +9 +5 to compute the size
- no copy&paste of the strings to compute the size and to concatenate
The function `asprintf` is not POSIX standard but the program
was already using it. Later it can be decided to use only POSIX
functions, then we can easly replace all the `asprintf(3)` with a local
implementation of that function.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it
Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a record has an unrecognized type, an error message is reported,
but it would also be helpful to see the contents of that record. At
least show what it is in hex, instead of just showing a blank line.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Linux kernel printf() has some extended use cases that dereference
the pointer. This is dangerouse for tracing because the pointer that is
dereferenced can change or even be unmapped. It also causes issues when
the trace data is extracted, because user space does not have access to
the contents of the pointer even if it still exists.
To handle this, the kernel was updated to process these dereferenced
pointers at the time they are recorded, and not post processed. Now they
exist in the tracing buffer, and no dereference is needed at the time of
reading the trace.
The event parsing library needs to handle this new case.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When processing %pX in pretty_print(), simplify the logic slightly by
incrementing the ptr to the format string if isalnum(ptr[1]) is true.
This follows the logic a bit more closely to what is in the kernel.
Also, this fixes a small bug where %pF was not giving the offset of the
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Aligns trace-cmd with the behavior of the kernel.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004822.118332436@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the value contains bits that are not defined by print_flags() helper,
then show the remaining bits. This aligns with the functionality of the
kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004821.976225232@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Older kernels have a bug that creates invalid symbols. event-parse.c
handles them by replacing them with a "%s" token. But the fix included
an extra backslash, and "\%s" was added incorrectly.
Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004821.827168881@goodmis.org
Link: http://lkml.kernel.org/r/d320000d37c10ce0912851e1fb78d1e0c946bcd9.1497486273.git.mikesart@fastmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The third parameter to do_install was not used by $(INSTALL) command.
Fix this by only setting the -m option when the third parameter is supplied.
The use of a third parameter was introduced in commit eb54e522a000 ("bpf:
install libbpf headers on 'make install'").
Without this change, the header files are install as executables files (755).
Fixes: eb54e522a000 ("bpf: install libbpf headers on 'make install'")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The plugin_dir_SQ variable is not used, remove it.
The function update_dir is also unused, remove it.
The variable $VERSION_FILES is empty, remove it.
These all originates from the introduction of the Makefile, and is likely a copy paste
from tools/lib/traceevent/Makefile.
Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
It seems like an oversight not to install the header file for libbpf,
given the libbpf.so + libbpf.a files are installed.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
libbpf is able to deduce the type of a program from the name of the ELF
section in which it is located. However, the comparison is made on the
first n characters, n being determined with sizeof() applied to the
reference string (e.g. "xdp"). When such section names are supposed to
receive a suffix separated with a slash (e.g. "kprobe/"), using sizeof()
takes the final NUL character of the reference string into account,
which implies that both strings must be equal. Instead, the desired
behaviour would consist in taking the length of the string, *without*
accounting for the ending NUL character, and to make sure the reference
string is a prefix to the ELF section name.
Subtract 1 to the total size of the string for obtaining the length for
the comparison.
Fixes: 583c90097f72 ("libbpf: add ability to guess program type based on section name")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
These elf object pieces are of type Elf64_Xword and therefore could be
"long long" on some builds.
Cast to "long long" and use printf format %lld to deal with this since
we are building with -Werror=format.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
/bin/sh's exit does not recognize -1 as a number, leading to
the following error message:
/bin/sh: 1: exit: Illegal number: -1
Use 1 as the exit code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
- recognize relocation emitted by llvm
- since all regular function will be kept in .text section and llvm
takes care of pc-relative offsets in bpf_call instruction
simply copy all of .text to relevant program section while adjusting
bpf_call instructions in program section to point to newly copied
body of instructions from .text
- do so for all programs in the elf file
- set all programs types to the one passed to bpf_prog_load()
Note for elf files with multiple programs that use different
functions in .text section we need to do 'linker' style logic.
This work is still TBD
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Libbpf picks the name of the first symbol in the corresponding
elf section to use as a program name. But without taking symbol's
scope into account it may end's up with some local label
as a program name. E.g.:
$ bpftool prog
1: type 15 name LBB0_10 tag 0390a5136ba23f5c
loaded_at Dec 07/17:22 uid 0
xlated 456B not jited memlock 4096B
Fix this by preferring global symbols as program name.
For instance:
$ bpftool prog
1: type 15 name bpf_prog1 tag 0390a5136ba23f5c
loaded_at Dec 07/17:26 uid 0
xlated 456B not jited memlock 4096B
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The bpf_prog_load() function will guess program type if it's not
specified explicitly. This functionality will be used to implement
loading of different programs without asking a user to specify
the program type. In first order it will be used by bpftool.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The uniform structure filter_arg sets its union based on the difference
of enum filter_arg_type, However, some functions use implicit type
conversion obviously.
warning: implicit conversion from enumeration type 'enum filter_exp_type'
to different enumeration type 'enum filter_op_type'
warning: implicit conversion from enumeration type 'enum filter_cmp_type'
to different enumeration type 'enum filter_exp_type'
Link: http://lkml.kernel.org/r/1509938415-113825-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type
which requires flags.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This library previously assumed a fixed-size map options structure.
Any new options were ignored. In order to allow the options structure
to grow and to support parsing older programs, this patch updates
the maps section parsing to handle varying sizes.
Object files with maps sections smaller than expected will have the new
fields initialized to zero. Object files which have larger than expected
maps sections will be rejected unless all of the unrecognized data is zero.
This change still assumes that each map definition in the maps section
is the same size.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add support for BPF_PROG_QUERY command to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
introduce bpf_prog_detach2() that takes one more argument prog_fd
vs bpf_prog_detach() that takes only attach_fd and type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Linus Torvalds
Andrey Ignatov
Alexei Starovoitov
John Fastabend
Josh Poimboeuf
Ingo Molnar
Jeremy Cline
Jiri Olsa
David S. Miller
Jesper Dangaard Brouer
Quentin Monnet
Clement Courbet
Sergey Senozhatsky
Eric Leblond
Steven Rostedt (VMware)
Taeung Song
Michael Sartain
Federico Vaga
Jan Kiszka
Jakub Kicinski
Alexei Starovoitov
Roman Gushchin
Cheng Jian
Greg Kroah-Hartman
Craig Gallek