aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/builtin-trace.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-10-15perf trace: Use thread_{,_set}_priv helpersNamhyung Kim1-8/+8
This is mechanical changes only for accounting access to thread->priv properly in the source level. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1412556363-26229-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-29perf trace: Fix mmap return address truncation to 32-bitChang Hyun Park1-3/+3
Using 'perf trace' for mmap is truncating return values by stripping the top 32 bits, actually printing only the lower 32 bits. This was because the ret value was of an 'int' type and not a 'long' type. The Problem: 991258501.244 ( 0.004 ms): mmap(len: 40001536, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1) = 0x56691000 991258501.257 ( 0.000 ms): minfault [_int_malloc+0x1038] => //anon@0x7fa056691008 //(d.) The first line shows an mmap, which succeeds and returns 0x56691000. However the next line shows a memory access to that virtual memory area, specifically to 0x7fa056691008. The upper 32 bit is lost due to the problem mentioned above, and thus mmap's return value didn't have the upper 0x7fa0. Tested on 3.17-rc5 from the linus's tree, and the HEAD of tip/master Signed-off-by: Chang Hyun Park <heartinpiece@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1411736041-8017-1-git-send-email-heartinpiece@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-26perf tools: Modify error code for when perf_session__new() failsTaeung Song1-1/+1
Because perf_session__new() can fail for more reasons than just ENOMEM, modify error code(ENOMEM or EINVAL) to -1. Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1411522417-9917-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-25perf trace: Filter out POLLHUP'ed file descriptorsArnaldo Carvalho de Melo1-1/+6
So that we don't continue polling on vanished file descriptors, i.e. file descriptors for events monitoring threads that exited. I.e. the following 'trace' command now exits as expected, instead of staying in an eternal loop: $ sleep 5s & $ trace -p `pidof sleep` Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6qegv786zbf6i8us6t4rxug9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-25perf evlist: Introduce poll method for common code idiomArnaldo Carvalho de Melo1-1/+1
Since we have access two evlist members in all these poll calls, provide a helper. This will also help to make the patch introducing the pollfd class more clear, as the evlist specific uses will be hiden away perf_evlist__poll(). Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-jr9d4aop4lvy9453qahbcgp0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-15perf trace: Use strerror_r instead of strerrorMasami Hiramatsu1-2/+4
Use strerror_r instead of strerror in error message for thead-safety. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naohiro Aota <naota@elisp.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140814022241.3545.97543.stgit@kbuild-fedora.novalocal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13perf tools: Check recorded kernel version when finding vmlinuxNamhyung Kim1-2/+2
Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13perf trace: Move call to symbol__init() after creating sessionNamhyung Kim1-3/+3
This is a preparation of fixing dso__load_kernel_sym(). It needs a session info before calling symbol__init(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1407825645-24586-13-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13perf trace: Add beautifier for mremap flags paramAlex Snast1-0/+26
~/devel/kernel/tools/perf(branch:master*) » sudo ./perf trace ~/mremap_test 0.543 ( 0.003 ms): mprotect(start: 0x600000, len: 4096, prot: READ ) = 0 0.550 ( 0.003 ms): mprotect(start: 0x7f441260d000, len: 4096, prot: READ) = 0 0.561 ( 0.010 ms): munmap(addr: 0x7f44125e2000, len: 165572 ) = 0 0.595 ( 0.012 ms): mmap(len: 12288, prot: READ|WRITE, flags: SHARED|ANONYMOUS|LOCKED, fd: -1) = 0x12608000 0.603 ( 0.006 ms): mremap(addr: 0x7f4412608000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da295000) = 0xda295000 0.608 ( 0.003 ms): mremap(addr: 0x7f441260a000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da297000) = 0xda297000 0.612 ( 0.003 ms): mremap(addr: 0x7f4412609000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da296000) = 0xda296000 0.619 ( 0.000 ms): exit_group( Signed-off-by: Alex Snast <asnast@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1407944560-26924-1-git-send-email-asnast@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12perf tools: Rename ordered_samples bool to ordered_eventsJiri Olsa1-1/+1
The time ordering is generic for all kinds of events, so using generic name 'ordered_events' for ordered_samples bool in perf_tool struct. No functional change was intended. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-07mrqzcuhsks9wfmxrzsvemz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-23perf tools: Fix build on gcc 4.4.7Arnaldo Carvalho de Melo1-1/+1
[acme@sandy linux]$ gcc --version gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. [acme@sandy linux]$ make O=/tmp/build/perf -C tools/perf install-bin <SNIP> CC /tmp/build/perf/builtin-trace.o builtin-trace.c: In function ‘perf_evlist__add_pgfault’: builtin-trace.c:1997: error: unknown field ‘sample_period’ specified in initializer make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1 make: *** [install-bin] Error 2 make: Leaving directory `/home/acme/git/linux/tools/perf' [acme@sandy linux]$ make O=/tmp/build/perf -C tools/perf install-bin make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qt7h2g5fcf42qiw5hv7mgpjk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08perf trace: Fix build on 32-bit systemsArnaldo Carvalho de Melo1-3/+3
CC /tmp/build/perf/builtin-trace.o builtin-trace.c: In function 'print_location': builtin-trace.c:1792:4: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'u64' [-Werror=format] builtin-trace.c:1794:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format] builtin-trace.c:1796:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format] cc1: all warnings being treated as errors make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [install-bin] Error 2 make: Leaving directory `/home/acme/git/linux/tools/perf' acme@linux-goap:~/git/linux> uname -a Linux linux-goap 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-843p3aqbw531eqiu2hah8o9p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08perf trace: Add pagefault statisticsStanislav Fomichev1-0/+17
'perf trace' can show summary of events using -S option. This commit also reports number of major/minor pagefault events in this summary. $ perf trace -s --pf all -- sleep 1 Summary of events: sleep (18604), 275 events, 99.6%, 197 minfaults, 0.000 msec syscall calls min avg max stddev (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- ------ read 2 0.000 0.001 0.002 100.00% open 3 0.004 0.005 0.007 21.13% close 3 0.001 0.001 0.001 1.37% fstat 3 0.001 0.002 0.002 10.66% mmap 8 0.002 0.004 0.006 10.69% mprotect 4 0.003 0.005 0.008 24.68% munmap 1 0.005 0.005 0.005 0.00% brk 3 0.001 0.002 0.003 28.08% access 3 0.002 0.003 0.005 24.48% nanosleep 1 1000.747 1000.747 1000.747 0.00% execve 8 0.000 0.033 0.246 91.00% arch_prctl 1 0.001 0.001 0.001 0.00% Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1404842716-19190-1-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26perf trace: Add possibility to switch off syscall eventsStanislav Fomichev1-26/+32
Currently, we may either trace syscalls or syscalls+pagefaults. We'd like to be able to trace *only* pagefaults and this commit implements this feature. Example: [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace --no-syscalls -F -p `pidof xchat` 0.000 ( 0.000 ms): xchat/4574 majfault [g_unichar_get_script+0x11] => /usr/lib64/libglib-2.0.so.0.3800.2@0xc403b (x.) 0.202 ( 0.000 ms): xchat/4574 majfault [_cairo_hash_table_lookup+0x53] => 0x2280ff0 (?.) 20.854 ( 0.000 ms): xchat/4574 majfault [gdk_cairo_set_source_pixbuf+0x110] => /usr/bin/xchat@0x6da1f (x.) 1022.000 ( 0.000 ms): xchat/4574 majfault [__memcpy_sse2_unaligned+0x29] => 0x7ff5a8ca0400 (?.) ^C[root@zoo /]# Below we can see malloc calls, 'trace' reading symbol tables in libraries to resolve symbols, etc. [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace --no-syscalls -F all --cpu 1 sleep 10 0.000 ( 0.000 ms): chrome/26589 minfault [0x1b53129] => /tmp/perf-26589.map@0x33cbcbf7f000 (x.) 96.477 ( 0.000 ms): libvirtd/947 minfault [copy_user_enhanced_fast_string+0x5] => 0x7f7685bba000 (?k) 113.164 ( 0.000 ms): Xorg/1063 minfault [0x786da] => 0x7fce52882a3c (?.) 7162.801 ( 0.000 ms): chrome/3747 minfault [0x8e1a89] => 0xfcaefed0008 (?.) <SNIP> 7773.138 ( 0.000 ms): chrome/3886 minfault [0x8e1a89] => 0xfcb0ce28008 (?.) 7992.022 ( 0.000 ms): chrome/26574 minfault [0x1b5a708] => 0x3de7b5fc5000 (?.) 8108.949 ( 0.000 ms): qemu-system-x8/4537 majfault [_int_malloc+0xee] => 0x7faffc466d60 (?.) 8108.975 ( 0.000 ms): qemu-system-x8/4537 minfault [_int_malloc+0x102] => 0x7faffc466d60 (?.) <SNIP> 8148.174 ( 0.000 ms): qemu-system-x8/4537 minfault [_int_malloc+0x102] => 0x7faffc4eb500 (?.) 8270.855 ( 0.000 ms): chrome/26245 minfault [do_bo_emit_reloc+0xdb] => 0x45d092bc004 (?.) 8270.869 ( 0.000 ms): chrome/26245 minfault [do_bo_emit_reloc+0x108] => 0x45d09150000 (?.) no symbols found in /usr/lib64/libspice-server.so.1.9.0, maybe install a debug package? 8273.831 ( 0.000 ms): trace/20198 majfault [__memcmp_sse4_1+0xbc6] => /usr/lib64/libspice-server.so.1.9.0@0xdf000 (d.) <SNIP> 8275.121 ( 0.000 ms): trace/20198 minfault [dso__load+0x38] => 0x14fe756 (?.) no symbols found in /usr/lib64/libelf-0.158.so, maybe install a debug package? 8275.142 ( 0.000 ms): trace/20198 minfault [__memcmp_sse4_1+0xbc6] => /usr/lib64/libelf-0.158.so@0x0 (d.) <SNIP> [root@zoo /]# Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1403799268-1367-6-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26perf trace: Add pagefaults record and replay supportStanislav Fomichev1-18/+45
Previous commit added live pagefault trace support, this one adds record and replay support. Example: [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace -F all record -a sleep 10 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1029.722 MB perf.data (~44989242 samples) ] [root@zoo /]# ls -la perf.data -rw-------. 1 root root 1083921722 Jun 26 17:44 perf.data [root@zoo /]# perf evlist raw_syscalls:sys_enter raw_syscalls:sys_exit major-faults minor-faults [root@zoo /]# trace -i perf.data | grep -v trace\/ | tail -15 156.137 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.) 156.139 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.) 156.140 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0xc4] => 0x0 (?.) 156.144 ( 0.000 ms): perl/18476 minfault [_int_free+0xda] => 0x0 (?.) 156.151 ( 0.000 ms): perl/18476 minfault [_int_free+0x1df] => 0x0 (?.) 156.158 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.) 156.161 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.) 156.168 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.) 156.172 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.) 156.173 ( 0.000 ms): perl/18476 minfault [_int_free+0xda] => 0x0 (?.) 156.183 ( 0.000 ms): perl/18476 minfault [Perl_hfree_next_entry+0xb4] => 0x0 (?.) 156.197 ( 0.000 ms): perl/18476 minfault [_int_free+0x1df] => 0x0 (?.) 156.216 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.) 156.221 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.) [root@zoo /]# Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1403799268-1367-4-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26perf trace: Add support for pagefault tracingStanislav Fomichev1-1/+124
This patch adds optional pagefault tracing support to 'perf trace'. Using -F/--pf option user can specify whether he wants minor, major or all pagefault events to be traced. This patch adds only live mode, record and replace will come in a separate patch. Example output: 1756272.905 ( 0.000 ms): curl/5937 majfault [0x7fa7261978b6] => /usr/lib/x86_64-linux-gnu/libkrb5.so.26.0.0@0x85288 (d.) 1862866.036 ( 0.000 ms): wget/8460 majfault [__clear_user+0x3f] => 0x659cb4 (?k) Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1403799268-1367-3-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26perf trace: Add perf_event parameter to tracepoint_handlerStanislav Fomichev1-3/+8
It will be used by next pagefault tracing patches in the series. Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1403799268-1367-2-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19perf trace: Cache the is_exit syscall testArnaldo Carvalho de Melo1-1/+4
No need to use two strcmp calls per syscall entry, do it just once, when reading the per syscall info. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lymtxhz0mg3adyt5e2pssn8f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19perf trace: Remove needless reassignmentsArnaldo Carvalho de Melo1-3/+0
The thread->priv value is already obtained a few lines earlier from the thread__trace() call. Leftovers from before thread__trace(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-96laa634vzfwlwxurevo40wp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19perf trace: Fix up fd -> pathname resolutionArnaldo Carvalho de Melo1-2/+2
There was a brown paper bag bug in the patch that introduced a reference implementation on using 'perf probe' made wannabe tracepoints that broke fd -> pathname resolution, fix it: [root@zoo ~]# perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string' Added new event: probe:vfs_getname (on getname_flags:65 with pathname=result->name:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 [root@zoo ~] Before: [acme@zoo linux]$ trace touch -e open,fstat /tmp/b 1.159 ( 0.007 ms): open(filename: 0x7fd73f2fe088, flags: CLOEXEC ) = 3 1.163 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e610 ) = 0 1.192 ( 0.009 ms): open(filename: 0x7fd73f4fedb8, flags: CLOEXEC ) = 3 1.201 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e660 ) = 0 1.501 ( 0.013 ms): open(filename: 0x7fd73f0a1610, flags: CLOEXEC ) = 3 1.505 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fd73f2ddb60 ) = 0 1.581 ( 0.011 ms): open(filename: 0x7fff1b2603da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3 [acme@zoo linux]$ After: [acme@zoo linux]$ trace touch -e open,fstat,dup2,mmap,close /tmp/b 1.105 ( 0.004 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1 ) = 0x2fbf000 1.136 ( 0.008 ms): open(filename: 0x7f8902dbc088, flags: CLOEXEC ) = 3 1.140 ( 0.002 ms): fstat(fd: 3</etc/ld.so.cache>, statbuf: 0x7fff19889ef0 ) = 0 1.146 ( 0.004 ms): mmap(len: 86079, prot: READ, flags: PRIVATE, fd: 3</etc/ld.so.cache> ) = 0x2fa9000 1.149 ( 0.001 ms): close(fd: 3</etc/ld.so.cache> ) = 0 1.170 ( 0.010 ms): open(filename: 0x7f8902fbcdb8, flags: CLOEXEC ) = 3 1.178 ( 0.002 ms): fstat(fd: 3</lib64/libc.so.6>, statbuf: 0x7fff19889f40 ) = 0 1.188 ( 0.006 ms): mmap(len: 3924576, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3</lib64/libc.so.6>) = 0x29e2000 1.207 ( 0.007 ms): mmap(addr: 0x7f8902d96000, len: 24576, prot: READ|WRITE, flags: PRIVATE|DENYWRITE|FIXED, fd: 3</lib64/libc.so.6>, off: 1785856) = 0x2d96000 1.217 ( 0.004 ms): mmap(addr: 0x7f8902d9c000, len: 16992, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS|FIXED, fd: -1) = 0x2d9c000 1.228 ( 0.002 ms): close(fd: 3</lib64/libc.so.6> ) = 0 1.243 ( 0.003 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1 ) = 0x2fa8000 1.250 ( 0.003 ms): mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1 ) = 0x2fa6000 1.452 ( 0.010 ms): open(filename: 0x7f8902b5f610, flags: CLOEXEC ) = 3 1.455 ( 0.002 ms): fstat(fd: 3</usr/lib/locale/locale-archive>, statbuf: 0x7f8902d9bb60 ) = 0 1.461 ( 0.004 ms): mmap(len: 106070960, prot: READ, flags: PRIVATE, fd: 3</usr/lib/locale/locale-archive>) = 0xfc4b9000 1.469 ( 0.002 ms): close(fd: 3</usr/lib/locale/locale-archive> ) = 0 1.528 ( 0.010 ms): open(filename: 0x7fff1988c3da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3 1.532 ( 0.002 ms): dup2(oldfd: 3</tmp/b> ) = 0 1.535 ( 0.001 ms): close(fd: 3</tmp/b> ) = 0 1.544 ( 0.001 ms): close( ) = 0 1.555 ( 0.001 ms): close(fd: 1 ) = 0 1.558 ( 0.001 ms): close(fd: 2 ) = 0 [acme@zoo linux]$ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vcm22xpjxc3j4hbyuzjzf7ik@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-10perf trace: Decode architecture-specific signal numbersBen Hutchings1-1/+9
SIGSTKFLT is not defined on alpha, mips or sparc. SIGEMT and SIGSWI are defined on some architectures and should be decoded here if so. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 8bad5b0abfdb ('perf trace: Beautify signal number arg in several syscalls') Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1391648441.3003.101.camel@deadeye.wl.decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-13perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) archesArnaldo Carvalho de Melo1-0/+18
Supporting decoding the ioctl 'request' parameter needs more work to properly support more architectures, the current approach doesn't work on at least powerpc and sparc, as reported by Ben Hutchings in http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk . Work around that by making it to be ifdefed for the architectures known to work with the current, limited approach, i386 and x86_64 till better code is written. Reported-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Ben Hutchings <ben@decadent.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: 78645cf3ed32 ("perf trace: Initial beautifier for ioctl's 'cmd' arg") Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10perf trace: Add fallback definition of EFD_SEMAPHOREBen Hutchings1-0/+4
glibc 2.17 is missing this on sparc, despite the fact that it's not architecture-specific. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 49af9e93adfa ('perf trace: Beautify eventfd2 'flags' arg') Cc: <stable@vger.kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-14perf record: Rename --no-delay to --no-bufferingArnaldo Carvalho de Melo1-1/+1
That is how the option summary describes it and so that we can free --delay to replace --initial-delay and then be consistent with stat's --delay equivalent option. Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf trace: Pack 'struct trace'Arnaldo Carvalho de Melo1-8/+9
Initial struct stats: /* size: 368, cachelines: 6, members: 24 */ /* sum members: 353, holes: 3, sum holes: 15 */ /* last cacheline: 48 bytes */ After reorg: [acme@ssdandy linux]$ pahole -C trace ~/bin/trace | tail -4 /* size: 360, cachelines: 6, members: 24 */ /* padding: 7 */ /* last cacheline: 40 bytes */ }; [acme@ssdandy linux]$ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6jimc80yu89qkx6zb8465s6t@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Auto unmap on destructorArnaldo Carvalho de Melo1-1/+0
Removing further boilerplate after making sure perf_evlist__munmap can be called multiple times for the same evlist. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-o0luenuld4abupm4nmrgzm6f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Close fds on destructorArnaldo Carvalho de Melo1-3/+1
Since it is safe to call perf_evlist__close() multiple times, autoclose it and remove the calls to the close from existing tools, reducing the tooling boilerplate. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2kq9v7p1rude1tqxa0aue2tk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Move destruction of maps to evlist destructorArnaldo Carvalho de Melo1-4/+2
Instead of requiring tools to do an extra destructor call just before calling perf_evlist__delete. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0jd2ptzyikxb5wp7inzz2ah2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13perf evlist: Move the SIGUSR1 error reporting logic to prepare_workloadArnaldo Carvalho de Melo1-1/+1
So that we have the boilerplate in the preparation method, instead of open coded in tools wanting the reporting when the exec fails. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-purbdzcphdveskh7wwmnm4t7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-27perf tools: Introduce zfreeArnaldo Carvalho de Melo1-8/+4
For the frequent idiom of: free(ptr); ptr = NULL; Make it expect a pointer to the pointer being freed, so that it becomes clear at first sight that the variable being freed is being modified. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19perf tools: Rename 'perf_record_opts' to 'record_optsArnaldo Carvalho de Melo1-1/+1
Reduce typing, functions use class__method convention, so unlikely to clash with other libraries. This actually was discussed in the "Link:" referenced message below. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-05perf trace: Fix summary percentage when processing filesDavid Ahern1-1/+3
Getting a divide by 0 when events are processed from a file: perf trace -i perf.data -s ... dnsmasq (1684), 10 events, inf%, 0.000 msec The problem is that the event count is not incremented as events are processed. With this patch: perf trace -i perf.data -s ... dnsmasq (1684), 10 events, 8.9%, 0.000 msec Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-05perf trace: Add support for syscalls vs raw_syscallsDavid Ahern1-2/+26
Older kernels (e.g., RHEL6) do system call tracing via syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to detect lack of raw_syscalls support and try syscalls. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-04perf tools: Add trace-event global object for tracepoint interfaceJiri Olsa1-2/+3
In order to get the proper plugins processing we need to use full trace-event interface when creating tracepoint events. So far we were using shortcut to get the parsed format. Moving current 'event_format__new' function into trace-event object as 'trace_event__tp_format'. This function uses properly initialized global trace-event object, ensuring proper plugins processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-02perf trace: Honour -m optionJiri Olsa1-1/+1
Currently trace command supports '-m' option, but does not honours its value and keeps the default. Changing the perf_evlist__mmap function call to use the '-m' configured value. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1385657842-8914-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-27perf trace: Remove thread summary coloringPekka Enberg1-11/+2
Thread summary line coloring looks ugly. It doesn't add much value so remove coloring completely. Signed-off-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1384447410-1771-1-git-send-email-penberg@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14perf trace: Tweak summary outputPekka Enberg1-5/+5
Tweak the summary output as suggested by Ingo Molnar: [penberg@localhost ~]$ perf trace -a --duration 10000 --summary -- sleep 1 ^C Summary of events: Xorg (817), 148 events, 0.0%, 0.000 msec syscall calls min avg max stddev (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- ------ read 7 0.002 0.004 0.011 32.00% rt_sigprocmask 40 0.001 0.001 0.002 1.31% ioctl 6 0.002 0.003 0.005 19.45% writev 7 0.004 0.018 0.059 43.76% select 9 0.000 74.513 507.869 74.61% setitimer 4 0.001 0.002 0.002 10.08% Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/1384345308-24404-1-git-send-email-penberg@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf target: Shorten perf_target__ to target__Arnaldo Carvalho de Melo1-5/+5
Getting unwieldly long, for this app domain should be descriptive enough and the use of __ to separate the class from the method names should help with avoiding clashes with other code bases. Reported-by: David Ahern <dsahern@gmail.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Add summary only optionDavid Ahern1-3/+13
Per request from Pekka make --summary a summary only option meaning do not show the individual system calls. Add another option to see all syscalls along with the summary. In addition use 's' and 'S' as shortcuts for the options. Requested-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Pekka Enberg <penberg@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Simplify '--summary' outputPekka Enberg1-13/+12
The output of 'perf trace --summary' tries to be too cute with formatting and makes it very hard to read. Simplify it in the spirit of "strace -c": [penberg@localhost libtrading]$ perf trace -a --duration 10000 --summary -- sleep 1 ^C Summary of events: dbus-daemon (555), 10 events, 0.0%, 0.000 msec msec/call syscall calls min avg max stddev --------------- -------- -------- -------- -------- ------ sendmsg 2 0.002 0.005 0.008 55.00 recvmsg 2 0.002 0.003 0.005 44.00 epoll_wait 1 0.000 0.000 0.000 0.00 NetworkManager (667), 56 events, 0.0%, 0.000 msec msec/call syscall calls min avg max stddev --------------- -------- -------- -------- -------- ------ poll 2 0.000 0.002 0.003 100.00 sendmsg 10 0.004 0.007 0.016 15.41 recvmsg 16 0.002 0.003 0.005 8.24 zfs-fuse (669), 4 events, 0.0%, 0.000 msec msec/call syscall calls min avg max stddev --------------- -------- -------- -------- -------- ------ futex 2 0.000 0.001 0.002 100.00 Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/1384267334-18953-1-git-send-email-penberg@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Change syscall summary duration orderPekka Enberg1-3/+3
Switch duration order to minimum, average, maximum for the '--summary' command line option because it's more natural to read. Signed-off-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Fix segfault on perf trace -i perf.dataNamhyung Kim1-16/+21
When replaying a previous record session, it'll get a segfault since it doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for caching the format fields. So fix it by properly initializing sys_enter/exit evsels that comes from reading the perf.data file header. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org [ Split the syscall tp field caching part in the previous patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Separate tp syscall field caching into init routine to be reusedNamhyung Kim1-8/+20
We need to set this in evsels coming out of a perf.data file header, not just for new ones created for live sessions. So separate the code that caches the syscall entry/exit tracepoint format fields into a new function that will be used in the next changeset. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12perf trace: Beautify fifth argument of mmap() as fdNamhyung Kim1-1/+2
The fifth argument of mmap syscall is fd and it often contains -1 as a value for anon mappings. Without this patch it doesn't show the file name as well as it shows -1 as 4294967295. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11perf machine: Simplify synthesize_threads methodArnaldo Carvalho de Melo1-2/+2
Several tools (top, kvm) don't need to be called back to process each of the syntheiszed records, instead relying on the machine__process_event function to change the per machine data structures that represent threads and mmaps, so provide a way to ask for this common idiom. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pusqibp8n3c4ynegd1frn4zd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11perf machine: Introduce synthesize_threads method out of open coded equivalentArnaldo Carvalho de Melo1-9/+2
Further simplifications to be done on following patch, as most tools don't use the callback, using instead just the canned machine__process_event one. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-r1m0vuuj3cat4bampno9yc8d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11perf record: Synthesize non-exec MMAP records when --data usedArnaldo Carvalho de Melo1-2/+2
When perf_event_attr.mmap_data is set the kernel will generate PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are created, so we need to synthesize from /proc/pid/maps for existing threads, as we do for exec mmaps. Right now just 'perf record' does it, but any other tool that uses perf_event__synthesize_thread(s|map) can request it. Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bill Gray <bgray@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Fowles <rfowles@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11perf evsel: Remove idx parm from constructorArnaldo Carvalho de Melo1-8/+5
Most uses of the evsel constructor are followed by a call to perf_evlist__add with an idex of evlist->nr_entries, so make rename the current constructor to perf_evsel__new_idx and remove the need for passing the constructor for the common case. We still need the new_idx variant because the way groups are handled, with evsel->nr_members holding the number of entries in an evlist, partitioning the evlist into sublists inside a single linked list. This asks for a clarifying refactoring, but for now simplify the non parser cases, so that tool writers don't have to bother with evsel idx setting. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-zy9tskx6jqm2rmw7468zze2a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-07perf trace: Don't relookup fields by name in each sampleArnaldo Carvalho de Melo1-11/+188
Instead do the lookups just when creating the tracepoints, initially for the most common, raw_syscalls:sys_{enter,exit}. It works by having evsel->priv have a per tracepoint structure with entries for the fields, for direct access, with the offset and a function to get the value from the sample, doing the swap if needed. Using a simple workload that does M millions write syscalls, we go from: # perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null Performance counter stats for '/tmp/oldperf trace ./sc_hello 100': 8,366,771,459 cycles 2.668025928 seconds time elapsed # perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null Performance counter stats for 'perf trace ./sc_hello 100': 8,345,187,650 cycles 2.631748425 seconds time elapsed Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-07perf evsel: Ditch evsel->handler.data fieldArnaldo Carvalho de Melo1-3/+3
Not needed since this cset: fcf65bf149af: perf evsel: Cache associated event_format So lets trim this struct a bit. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j8setslokt0goiwxq9dogzqm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.