aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-15net: dsa: dsa_fastest_ageing_time return unsignedVivien Didelot1-2/+2
The ageing time is defined as unsigned int, so make dsa_fastest_ageing_time return an unsigned int instead of int. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15mqprio: Modify mqprio to pass user parameters via ndo_setup_tc.Amritha Nambiar14-28/+62
The configurable priority to traffic class mapping and the user specified queue ranges are used to configure the traffic class, overriding the hardware defaults when the 'hw' option is set to 0. However, when the 'hw' option is non-zero, the hardware QOS defaults are used. This patch makes it so that we can pass the data the user provided to ndo_setup_tc. This allows us to pull in the queue configuration if the user requested it as well as any additional hardware offload type requested by using a value other than 1 for the hw value. Finally it also provides a means for the device driver to return the level supported for the offload type via the qopt->hw value. Previously we were just always assuming the value to be 1, in the future values beyond just 1 may be supported. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15mqprio: Change handling of hw u8 to allow for multiple hardware offload modesAlexander Duyck2-10/+24
This patch is meant to allow for support of multiple hardware offload type for a single device. There is currently no bounds checking for the hw member of the mqprio_qopt structure. This results in us being able to pass values from 1 to 255 with all being treated the same. On retreiving the value it is returned as 1 for anything 1 or greater being set. With this change we are currently adding limited bounds checking by defining an enum and using those values to limit the reported hardware offloads. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15netxen_nic: remove redundant check if retries is zeroColin Ian King1-7/+2
At the end of the timeout loop, retries will always be zero so the check for zero is redundant so remove it. Also replace printk with pr_err as recommended by checkpatch. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: stmmac interrupt treatment prepared for multiple queuesJoao Pinto1-8/+20
This patch prepares the main ISR for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: tso init prepared for multiple queuesJoao Pinto1-2/+6
This patch configures TSO for all available tx queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: dma channel init prepared for multiple queuesJoao Pinto3-37/+88
This patch prepares the DMA initialization process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare rx/tx set tail function for multiple queuesJoao Pinto1-2/+2
This patch prepares RX and TX set tail functions for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx and tx ring length prepared for multiple queuesJoao Pinto4-16/+32
This patch prepares tx and rx ring length configuration for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx watchdog config prepared for multiple queuesJoao Pinto5-8/+11
This patch adds rx watchdog configuration for all queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma interrupt treatment for multiple queuesJoao Pinto6-29/+39
This patch prepares DMA interrupts treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare stmmac_tx_err for multiple queuesJoao Pinto1-4/+5
This patch prepares stmmac_err for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx/tx dma start/stop prepared for multiple queuesJoao Pinto6-39/+125
This patch prepares the RX/TX DMA stop/start process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: enable/disable dma irq prepared for multiple queuesJoao Pinto6-21/+22
This patch prepares the DMA IRQ enable/disable process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma op mode config for multiple queuesJoao Pinto3-79/+124
This patch prepares DMA Operation Mode configuration for multiple queues. The work consisted on breaking the DMA operation Mode configuration function into RX and TX scope and adapting its mechanism in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15gfs2: Avoid alignment hole in struct lm_locknameAndreas Gruenbacher1-1/+1
Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
2017-03-15i40e: rename auto_disable_flags to hw_disabled_flagsHarshitha Ramamurthy4-31/+35
A previous commit introduced a field that tracks the features that are disabled due to HW resource limitations as opposed to the featured disabled by the user. This patch changes the name of the field to make it more readable since it might get confusing when looking at code containing both the flags field and the auto_disable_features field together. Change-ID: Idcc9888659698f6fe3ccff17c8c3f09b5026f708 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e/i40evf: Change version from 1.6.27 to 2.1.7Bimmy Pujari2-6/+6
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: Allow untrusted VFs to have more filtersMitch Williams1-1/+1
Our original filter limit of 8 was based on behavior that we saw from Linux VMs. Now we're running Other Operating Systems under KVM and we see that they commonly use more MAC filters. Since it seems weird to require people to enable trusted VFs just to boot their OS, bump the number of filters allowed by default. Change-ID: I76b2dcb2ad6017e39231ad3096c3fb6f065eef5e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e/i40evf: Add support for mapping pages with DMA attributesAlexander Duyck4-10/+58
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc. Change-ID: If176824e8231c5b24b8a5d55b339a6026738fc75 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: Clarify steps in MAC/VLAN filters initialization routineFilip Sadowski1-4/+4
This patch clarifies the reason for removal of automatically firmware-generated filter and explicit addition of filter which accepts frames with any VLAN id. Change-ID: Iabf180b6d61c4d8a36d3bcf8457c377a6f2aca0e Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: fix RSS queues only operating on PF0Lihong Yang2-12/+5
This patch fixes the issue that RSS offloading only works on PF0 by using the direct register writing of the hash keys for the VFs instead of using the admin queue command to do so. Change-ID: Ia02cda7dbaa23def342e8786097a2c03db6f580b Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: fix ethtool to get EEPROM data from X722 interfaceLihong Yang1-0/+5
Currently ethtool -e will error out with a X722 interface as its EEPROM has a scope limit at offset 0x5B9FFF. This patch fixes the issue by setting the EEPROM length to the scope limit to avoid NVM read failure beyond that. Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372 Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: don't add more vectors to num_lan_msix than number of CPUsJacob Keller1-3/+27
This is a solution to avoid adding too many queues to num_lan_msix. A recent refactor of queue pairs accidentally added all remaining vectors to the num_lan_msix which can have adverse performance issues, due to enabling more queues than the number of CPU cores. This patch removes the old calculation, and replaces it with a simple algorithm. 1) add queue pairs up to num_online_cpus(), but capped at half of total vectors 2) then add alternative features such as flow directory and similar 3) finally, add the remaining vectors back to queue pairs, but capped such that the total number of queue pairs does not exceed num_online_cpus(). Change-ID: I668abf67d5011a1248866daba8885f4ff00cb8d9 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40e: KISS the client interfaceMitch Williams5-328/+179
(KISS is Keep It Simple, Stupid. Or is it?) The client interface vastly overengineered for what it needs to do. It was originally designed to support multiple clients on multiple netdevs, possibly even with multiple drivers. None of this happened, and now we know that there will only ever be one client for i40e (i40iw) and one for i40evf (i40iwvf). So, time for some KISS. Since i40e and i40evf are a Dynasty, we'll simplify this one to match the VF interface. First, be a Destroyer and remove all of the lists and locks required to support multiple clients. Keep one static around to keep track of one client, and track the client instances for each netdev in the driver's pf (or adapter) struct. Now it's Almost Human. Since we already know the client type is iWarp, get rid of any checks for this. Same for VSI type - it's always going to be the same type, so it's just a Parasite. While we're at it, fix up some comments. This makes the function headers actually match the functions. These changes reduce code complexity, simplify maintenance, squash some lurking timing bugs, and allow us to Rock and Roll All Nite. Change-ID: I1ea79948ad73b8685272451440a34507f9a9012e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-15i40evf: add client interfaceMitch Williams7-10/+879
In preparation for upcoming RDMA-capable hardware, add a client interface to the VF driver. This is a slightly-simplified version of the PF client interface, with the names changed to protect the innocent. Due to the nature of the VF<->PF interactions, the client interface sometimes needs to call back into itself to pass messages. Because of this, we can't use the coarse-grained locking like the PF's client interface uses. Instead, we handle all client interactions in a separate thread so the watchdog can still run and process virtual channel messages. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-14i40e: fix up recent proxy and wol bits for X722_SUPPORTShannon Nelson2-2/+128
Some opcodes added & reordered to be in numerical order with the rest of the opcodes. This patch adds admin queue structs to support Wake on LAN feature for X722. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-14i40e: Acquire NVM lock before reads on all devicesAaron Salter1-6/+6
Acquire NVM lock before reads on all devices. Previously, locks were only used for X722 and later. Fixes an issue where simultaneous X710 NVM accesses were interfering with each other. Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638 Signed-off-by: Aaron Salter <aaron.k.salter@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-14qed*: Add support for QL41xxx adaptersMintz, Yuval15-308/+630
This adds the necessary infrastructure changes for initializing and working with the new series of QL41xxx adapaters. It also adds 2 new PCI device-IDs to qede: - 0x8070 for QL41xxx PFs - 0x8090 for VFs spawning from QL41xxx PFs Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Enable iSCSI Out-of-OrderMintz, Yuval1-0/+3
Missing in the initial submission, qed fails to propagate qedi's request to enable OOO to firmware. Fixes: fc831825f99e ("qed: Add support for hardware offloaded iSCSI") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Correct out-of-bound access in OOO historyMintz, Yuval1-0/+2
Need to set the number of entries in database, otherwise the logic would quickly surpass the array. Fixes: 1d6cff4fca43 ("qed: Add iSCSI out of order packet handling") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Fix interrupt flags on Rx LL2Ram Amrani1-4/+5
Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Free previous connections when releasing iSCSIMintz, Yuval1-0/+28
Fixes: fc831825f99e ("qed: Add support for hardware offloaded iSCSI") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Fix mapping leak on LL2 rx flowMintz, Yuval1-0/+2
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer. Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support"); Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Prevent creation of too-big u32-chainsTomer Tayar1-3/+2
Current Logic would allow the creation of a chain with U32_MAX + 1 elements, when the actual maximum supported by the driver infrastructure is U32_MAX. Fixes: a91eb52abb50 ("qed: Revisit chain implementation") Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed: Align CIDs according to DORQ requirementRam Amrani1-1/+2
The Doorbell HW block can be configured at a granularity of 16 x CIDs, so we need to make sure that the actual number of CIDs configured would be a multiplication of 16. Today, when RoCE is enabled - given that the number is unaligned, doorbelling the higher CIDs would fail to reach the firmware and would eventually timeout. Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14mlxsw: reg: Fix SPVMLR max record countJiri Pirko1-1/+1
The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14mlxsw: reg: Fix SPVM max record countJiri Pirko1-1/+1
The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14net: Resend IGMP memberships upon peer notification.Vlad Yasevich1-0/+1
When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13lwtunnel: remove unused but set variableRoopa Prabhu1-2/+0
silences the below warning: net/core/lwtunnel.c: In function ‘lwtunnel_valid_encap_type_attr’: net/core/lwtunnel.c:165:17: warning: variable ‘nla’ set but not used [-Wunused-but-set-variable] Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13rds: ib: unmap the scatter/gather list when errorZhu Yanjun1-7/+19
When some errors occur, the scatter/gather list mapped to DMA addresses should be handled. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13rds: ib: add the static type to the functionZhu Yanjun2-4/+3
The function rds_ib_map_fmr is used only in the ib_fmr.c file. As such, the static type is added to limit it in this file. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13rds: ib: remove redundant ib_dealloc_fmrZhu Yanjun1-5/+2
The function ib_dealloc_fmr will never be called. As such, it should be removed. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13rds: ib: drop unnecessary rdma_rejectZhu Yanjun1-3/+2
When rdma_accept fails, rdma_reject is called in it. As such, it is not necessary to execute rdma_reject again. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dccp: fix memory leak during tear-down of unsuccessful connection requestHannes Frederic Sowa1-0/+1
This patch fixes a memory leak, which happens if the connection request is not fulfilled between parsing the DCCP options and handling the SYN (because e.g. the backlog is full), because we forgot to free the list of ack vectors. Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13tun: fix premature POLLOUT notification on tun devicesHannes Frederic Sowa1-3/+15
aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dccp/tcp: fix routing redirect raceJon Maxwell4-8/+14
As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13ucc/hdlc: fix two little issueZhao Qiang1-2/+2
1. modify bd_status from u32 to u16 in function hdlc_rx_done, because bd_status register is 16bits 2. write bd_length register before writing bd_status register Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: add support for the GENETv5 hardwareDoug Berger4-50/+118
This commit adds support for the GENETv5 implementation. The GENETv5 reports a major version of 6 instead of 5 so compensate for this when verifying the configuration of the driver. Also the EPHY revision is now contained in the MDIO registers of the PHY so the EPHY revision of 0 in GENET_VER_FMT is expected for GENETv5. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dt-bindings: net: update bcmgenet binding for GENETv5Doug Berger2-7/+8
The device tree documentation must be updated to reflect the new compatible strings "brcm,genet-v5" and "brcm,genet-mdio-v5" used by the GENETv5 driver. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.