| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add CryptoCell AEAD support
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CryptoCell IV hardware generation support.
This patch adds the needed support to drive the HW but does not expose
the ability via the kernel crypto API yet.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CryptoCell skcipher support
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CryptoCell async. hash and HMAC support.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce basic low level Arm TrustZone CryptoCell HW support.
This first patch doesn't actually register any Crypto API
transformations, these will follow up in the next patch.
This first revision supports the CC 712 REE component.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I ran into this warning during randconfig testing:
drivers/staging/rtl8723bs/os_dep/rtw_proc.c: In function 'rtw_adapter_proc_deinit':
drivers/staging/rtl8723bs/os_dep/rtw_proc.c:738:25: error: unused variable 'drv_proc' [-Werror=unused-variable]
drivers/staging/rtl8723bs/os_dep/rtw_proc.c: In function 'rtw_adapter_proc_replace':
drivers/staging/rtl8723bs/os_dep/rtw_proc.c:762:25: error: unused variable 'drv_proc' [-Werror=unused-variable]
The problem is that the code procfs code gets built even when CONFIG_PROC_FS
is disabled, but some functions are turned into empty stubs then. This
is easily addressed by adding an #ifdef around the definition of the
CONFIG_PROC_DEBUG macro.
However, I could not bear looking at the macro name that clashes with the
Kconfig name space, so I also renamed it to simply PROC_DEBUG, along with
the other rtl8723bs specific CONFIG_DEBUG_* macros that I renamed the same
way. This is consistent with how we handle the same checks in the non-staging
rtlwifi driver.
As the code path for !CONFIG_PROC_DEBUG had not been tested properly, it
turned out to be incorrect and requires adding 'static inline' annotations
for the stub handlers, and moving some variables around.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The newly added driver causes lots of warnings like
drivers/staging/rtl8723bs/core/rtw_recv.c: In function 'validate_recv_frame':
drivers/staging/rtl8723bs/core/rtw_recv.c:1602:4: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
DBG_COUNTER(adapter->rx_logs.core_rx_pre_data_handled);
drivers/staging/rtl8723bs/core/rtw_xmit.c: In function 'update_attrib':
drivers/staging/rtl8723bs/core/rtw_xmit.c:726:3: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
DBG_COUNTER(padapter->tx_logs.core_tx_upd_attrib_unknown);
drivers/staging/rtl8723bs/hal/HalPhyRf.c: In function 'ODM_TXPowerTrackingCallback_ThermalMeter':
drivers/staging/rtl8723bs/hal/HalPhyRf.c:146:4: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
drivers/staging/rtl8723bs/hal/HalPhyRf.c:529:6: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
drivers/staging/rtl8723bs/hal/HalPhyRf.c:559:6: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
When DBG_COUNTER() etc is defined as a non-empty macro, we get the intended
behavior and no warning. Using no_printk() for printing helper functions
as the added advantage of compile-time checking format strings
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify the code indentations to fix the checkpatch issues.
Signed-off-by: Christophe Colin <popscolin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
removes hardcoded function name and uses __func__ to print info.
Signed-off-by: Dhananjay Balan <mail@dbalan.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a style warning for a line over 80 characters long.
Signed-off-by: Ian Chard <ian@chard.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 4.9 mandated USB buffers to be heap allocated. This causes
the driver to fail.
Create buffer for USB transfers.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 4.9 mandated USB buffers be heap allocated this causes the driver
to fail.
Since there is a wide range of buffer sizes use kmemdup to create
allocated buffer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed the usb_device_reset(), replace with call to usb_reset_device()
directly. Plus it removes the confusing function name and addressed
the checkpatch warning. This change also swaps string in the dev_warn() call
with __func__ argument to "vt6656_probe" instead of literal string
"usb_reset_device".
WARNING: Prefer using "%s", __func__ to embedded function names
#417: FILE: main_usb.c:417:
+ "usb_device_reset fail status=%d\n", status);
total: 0 errors, 1 warnings, 1058 lines checked
And after fix:
main_usb.c has no obvious style problems and is ready for submission.
Signed-off-by: Chewie Lin <linsh@oregonstate.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The root issue is that we are not allowed to have items on the
stack being passed to "DMA" like operations. In this case we have
a vmcall and an inline completion of scsi command.
This patch fixes the issue by moving the variables on stack in
do_scsi_nolinuxstat() to heap memory.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The root issue is that we are not allowed to have items on the
stack being passed to "DMA" like operations. In this case we have
vmcall operation that was using parameters from the stack.
This patch fixes the issue by moving the variables on stack in
issue_vmcall_io_controlvm_addr() to vmcall_controlvm_addr struct.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove POSTCODEs from visorchipset_init and replace them with dev_err when
needed.
Since there are no more POSTCODEs in the code, we can get rid of the data
in the header file as well.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace postcodes with dev_err in the function
setup_crash_device_work_queue.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The if statement was sending us down the happy path with the error path
in the else. This can be simplified by having the if be the error and
just falling through with the good path.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace POSTCODEs with dev_err in the function my_device_changestate.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the POSTCODEs with dev_err in my_device_create.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the POSTCODE logging from bus_configure, replace it with an
error message if we fail dumping the errno.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed the POSTCODEs from the function bus_create.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace POSTCODES in save_crash_msg with dev_err handling.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the POSTCODES in visorbus_init. Since there are no more POSTCODES
in visorbus_main.c we can remove the reference to the vmcallinterface
header file.
No need for vmcallinterface in visorbus_main.c
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The postcodes in visorchipset_exit were not displaying errors, they can
just be removed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since kzalloc will display error the postcode becomes redundant, it
can be removed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get rid of postcodes from visorbus_main.c that are just informational.
They were not logging errors, we don't need to replace them with
anything.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove postcodes from create_bus_instance. If there is an error log
it with dev_err.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get rid of the postcodes from the function chipset_init. They were
being noisy, so don't replace them with errors.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove POSTCODES from create_visor_device, when we fail log an error
with dev_err.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow retry when allocating memory.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Catch and report back errors when visorchannel_write fails.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Limit the amount that gets pulled from the queue on each try so we don't
get stuck in an infinite loop if something has gone wrong with the s-Par
firmware.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comment was outdated and did not reflect what was actually happening.
Update the comment to reflect reality.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Moved the brace to the left to fix the indentation issue.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Shouldn't use uint32 in the kernel, it can be replaced with int here.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Functions in c files don't need to be inlined, get rid of the keyword.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are several different controlvm response functions, consolidate them
to one so we can simplify error handling.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver header declares enumeration types without tags. Using
informative tags makes the code easier to understand and
eliminates the need to comment the enum.
Add tags to enumeration types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver uses preprocessor directives to define multicast filter
constants. These can be defined using an enumeration type. Doing so
adds to the readability and gives the assists the compiler.
Add enumeration type multicast_filter_type to replace preprocessor
defined constants.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Macro includes commented out code. Removing dead code line enables
braces to be removed. Macro is easier to read if the code is clean.
Clean up macro ps_confirm_wait_inc.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Inside loop, code block is guarded with an 'if' statement. Instead of
guarding the block we can invert the 'if' statement conditional and
continue the loop. Doing so allows subsequent code indentation to be
reduced and aids the readability of the code.
Invert 'if' statement conditional, continue loop if new conditional
evaluates to true. Reduce subsequent code indentation level. Do not
change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The returned pointer from netdev_priv() (void *) does not need to be
cast.
Remove unnecessary cast of void * returned by netdev_priv().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver currently uses abbreviations 'mgt' and 'mngmt' for
'management'. Also 'power' is sometimes abbreviated to 'pow' and other
times not. It makes the code easier to read and easier to modify if
one abbreviation is used throughout the driver. 'mgmt' is widely
accepted as an abbreviation of 'management'. 'power' can be spelled
out in full, the extra two characters aids readability without an
excessive cost.
Make abbreviation of 'management' uniform across the driver, function
names, preprocessor defined constants, and enumeration types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checkpatch emits CHECK: Please don't use multiple blank lines.
Remove multiple blank lines.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver uses preprocessor directives to define SLP_ASLEEP and
SLP_ACTIVE. These can be defined using an enumeration type. Doing so
adds to the readability and gives the usual compiler benefits of
having an enum. Functions that currently accept integer types can now
use the new enumeration type, further aiding readability.
Add enumeration type sleep_mode_type. Update code that handles sleep
mode to use the new enumeration type.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Host interface connection status is handled using a 32 bit type. Top
byte is used as for FORCE_DISCONNECT status, low bits are used for
connect/disconnect status. Driver masks and checks integers to
ascertain status. If functions are defined to do the masking and
equality check then the details of how the status integer is used are
abstracted away. This makes the code easier to read. Also future
updates to the status handling will be easier because the code is in
one place.
Driver currently uses the CONNECT_STATUS and DISCONNECT_STATUS as
values, as apposed to opaque values. Because of this driver code
checks for equality with CONNECT_STATUS and DISCONNECT_STATUS as
apposed to negating a single check (ie 'foo != CONNECT_STATUS). In
order to maintain the current functionality we define two separate
functions is_connect_status() and is_disconnect_status().
Add functions to abstract the status integer check. Update all sites
that do the check manually to use the newly defined functions.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver contains duplicate code. Host interface has numerous request
functions which allocate memory for a request header. Each request
header is different but all contain, as the first member, a hostif_hdr
structure. This structure has size and event members which need to be
set. By defining a helper function to allocate the memory and set the
initial hostif_hdr members code duplication is reduced.
Add function to allocate memory for a host interface request. Set
'size' and 'event' members. Remove duplicate code using newly defined
function.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Memory allocation code contains unneeded debug statements, failed
kmalloc() calls typically do not require a debug message. Introduction
of a local 'size' variable allows kmalloc() call to be marginally
cleaner, still uses magic numbers but these require a more substantial
fix. Moving the magic numbers onto a single line opens the way for
further refactoring.
Clean memory allocation code, remove debug statements.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Gilad Ben-Yossef
Arnd Bergmann
Christophe Colin
Dhananjay Balan
Ian Chard
Malcolm Priestley
Chewie Lin
Pan Bian
Sameer Wadgaonkar
David Kershner
Tobin C. Harding