aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-19ahci: Add runtime PM support for the host controllerMika Westerberg1-12/+61
This patch adds runtime PM support for the AHCI host controller driver so that the host controller is powered down when all SATA ports are runtime suspended. Powering down the AHCI host controller can reduce power consumption and possibly allow the CPU to enter lower power idle states (S0ix) during runtime. Runtime PM is blocked by default and needs to be unblocked from userspace as needed (via power/* sysfs nodes). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19ahci: Add functions to manage runtime PM of AHCI portsMika Westerberg1-1/+47
Add new functions ahci_rpm_get_port()/ahci_rpm_put_port() that change runtime PM status of AHCI ports. Depending if the AHCI host has runtime PM enabled or disabled calling these may trigger runtime suspend/resume of the host controller. We also call these functions in appropriate places to make sure host controller registers are available before using them. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19ahci: Convert driver to use modern PM hooksMika Westerberg1-27/+24
In order to add support for runtime PM to the ahci driver we first need to convert the driver to use modern non-legacy system suspend hooks. There should be no functional changes. tj: Updated .driver.pm init for older compilers as suggested by Andy and Chrsitoph. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19ahci: Cache host controller versionMika Westerberg2-4/+4
This allows sysfs nodes to read the cached value directly instead of powering up possibly runtime suspended controller. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19scsi: Drop runtime PM usage count after host is addedMika Westerberg1-0/+7
Runtime PM of the SCSI host is already handled by calls to scsi_autopm_get_host() and scsi_autopm_put_host() from appropriate places whenever the host needs to be powered on. This works fine when there is device connected to the host as once it runtime suspends the host will too. However, if there is no device connected the host is never runtime suspended (the usage counter is always 0). Allow runtime suspend of host even if it has no devices connected by calling scsi_autopm_put_host() at the end of scsi_add_host_with_dma(). We temporarily increase runtime PM usage counter first so call to scsi_autopm_put_host() will result idle request to be scheduled for the device. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19scsi: Set request queue runtime PM status back to active on resumeMika Westerberg1-0/+10
We treat system suspend of SCSI devices pretty much the same as runtime suspend. If the device is already runtime suspended we leave it to that state during system suspend. On resume from system sleep we then resume the device and correct the runtime PM status back to "active". There is a problem with this because runtime PM status of the request queue in question is not changed (it will be in "suspended" state). When SCSI disk driver (sd.c) resumes the disk it sends START message to the device and because the request queue is still in "suspended" state blk_pm_peek_request() returns NULL preventing resume of the disk. The issue can be reproduced with following commands: # echo auto > /sys/block/sda/device/power/control # echo 15000 > /sys/block/sda/device/power/autosuspend_delay_ms [ 57.191706] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 57.380015] sd 0:0:0:0: [sda] Stopping disk Now suspend the machine: # rtcwake -s10 -mmem This ends up in soft lockup because resume is not proceeding accordingly and userspace is never restarted. Also there is nothing printed to the console. Fix this by forcing request queue status to "active" before the disk is resumed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19block: Add blk_set_runtime_active()Mika Westerberg2-0/+26
If block device is left runtime suspended during system suspend, resume hook of the driver typically corrects runtime PM status of the device back to "active" after it is resumed. However, this is not enough as queue's runtime PM status is still "suspended". As long as it is in this state blk_pm_peek_request() returns NULL and thus prevents new requests to be processed. Add new function blk_set_runtime_active() that can be used to force the queue status back to "active" as needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-18ata: ahci_mvebu: add support for Armada 3700 variantLior Amsalem1-5/+9
The main difference in the new Armada 3700 is that no address decoding needs to take place in the driver probe. [gregory.clement@free-electrons.com: reformulate the commit log] Signed-off-by: Lior Amsalem <alior@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Tested-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-18libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()Tejun Heo1-2/+2
ata_scsi_park_show() was pairing spin_lock_irqsave() with spin_unlock_irq(). As the function is always called with irq enabled, it didn't actually break anything. Use spin_lock_irq() instead. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Elias Oltmanns <eo@nebensachen.de>
2016-02-11libata: support AHCI on OCTEON platformAleksey Makarov7-0/+168
The OCTEON SATA controller is currently found on cn71XX devices. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Vinita Gupta <vgupta@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11libata: fix HDIO_GET_32BIT ioctlArnd Bergmann2-8/+7
As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not work correctly in compat mode with libata. I have investigated the issue further and found multiple problems that all appeared with the same commit that originally introduced HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy a 'long' variable containing either 0 or 1 to user space. The problems with this are: * On big-endian machines, this will always write a zero because it stores the wrong byte into user space. * In compat mode, the upper three bytes of the variable are updated by the compat_hdio_ioctl() function, but they now contain uninitialized stack data. * The hdparm tool calling this ioctl uses a 'static long' variable to store the result. This means at least the upper bytes are initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT would fill them with data that remains stale when the low byte is overwritten. Fortunately libata doesn't implement any of the affected ioctl commands, so this would only happen when we query both an IDE and an ATA device in the same command such as "hdparm -N -c /dev/hda /dev/sda" * The libata code for unknown reasons started using ATA_IOC_GET_IO32 and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT, while the ioctl commands that were added later use the normal HDIO_* names. This is harmless but rather confusing. This addresses all four issues by changing the code to use put_user() on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem does, and by clarifying the names of the ioctl commands. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Soohoon Lee <Soohoon.Lee@f5.com> Tested-by: Soohoon Lee <Soohoon.Lee@f5.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.Suman Tripathi1-1/+46
Due to H/W errata, the HOST_IRQ_STAT register misses the edge interrupt when clearing the HOST_IRQ_STAT register and hardware reporting the PORT_IRQ_STAT register happens to be at the same clock cycle. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.Suman Tripathi3-45/+41
The flexibility to override the irq handles in the LLD's are already present, so controllers implementing a edge trigger latch can implement their own interrupt handler inside the driver. This patch removes the AHCI_HFLAG_EDGE_IRQ support from libahci and moves edge irq handling to ahci_xgene. tj: Minor update to description. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kenrel.org>
2016-02-11libahci: Implement the capability to override the generic ahci interrupt handler.Suman Tripathi2-7/+22
This patch implements the capability to override the generic AHCI interrupt handler so that specific ahci drivers can implement their own custom interrupt handler routines. It also exports ahci_handle_port_intr so that custom irq_handler implementations can use it. tj: s/ahci_irq_handler/irq_handler/ and updated description. Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-10ahci: Intel DNV device IDs SATAAlexandra Yates1-0/+20
Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2016-02-01libata: fix sff host state machine locking while pollingTejun Heo1-21/+11
The bulk of ATA host state machine is implemented by ata_sff_hsm_move(). The function is called from either the interrupt handler or, if polling, a work item. Unlike from the interrupt path, the polling path calls the function without holding the host lock and ata_sff_hsm_move() selectively grabs the lock. This is completely broken. If an IRQ triggers while polling is in progress, the two can easily race and end up accessing the hardware and updating state machine state at the same time. This can put the state machine in an illegal state and lead to a crash like the following. kernel BUG at drivers/ata/libata-sff.c:1302! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000 RIP: 0010:[<ffffffff83a83409>] [<ffffffff83a83409>] ata_sff_hsm_move+0x619/0x1c60 ... Call Trace: <IRQ> [<ffffffff83a84c31>] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584 [<ffffffff83a85611>] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877 [< inline >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629 [<ffffffff83a85bf3>] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902 [<ffffffff81479f98>] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157 [<ffffffff8147a717>] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205 [<ffffffff81484573>] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623 [< inline >] generic_handle_irq_desc include/linux/irqdesc.h:146 [<ffffffff811a92bc>] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78 [<ffffffff811a7e4d>] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240 [<ffffffff86653d4c>] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520 <EOI> [< inline >] rcu_lock_acquire include/linux/rcupdate.h:490 [< inline >] rcu_read_lock include/linux/rcupdate.h:874 [<ffffffff8164b4a1>] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145 [< inline >] do_fault_around mm/memory.c:2943 [< inline >] do_read_fault mm/memory.c:2962 [< inline >] do_fault mm/memory.c:3133 [< inline >] handle_pte_fault mm/memory.c:3308 [< inline >] __handle_mm_fault mm/memory.c:3418 [<ffffffff816efb16>] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447 [<ffffffff8127dc16>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238 [<ffffffff8127e358>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331 [<ffffffff8126f514>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264 [<ffffffff86655578>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986 Fix it by ensuring that the polling path is holding the host lock before entering ata_sff_hsm_move() so that all hardware accesses and state updates are performed under the host lock. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com Cc: stable@vger.kernel.org
2016-01-29libata-sff: use WARN instead of BUG on illegal host state machine stateTejun Heo1-1/+2
ata_sff_hsm_move() triggers BUG if it sees a host state machine state that it dind't expect. The risk for data corruption when the condition occurs is low as it's highly unlikely that it would lead to spurious completion of commands. The BUG occasionally triggered for subtle race conditions in the driver. Let's downgrade it to WARN so that it doesn't kill the machine unnecessarily. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com>
2016-01-25libata: disable forced PORTS_IMPL for >= AHCI 1.3Tejun Heo1-2/+2
Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: stable@vger.kernel.org
2016-01-25libata: blacklist a Viking flash model for MWDMA corruptionShikha Jain1-0/+1
Viking flash model VRFDFC22048UCHC-TE causes data corruption in MWDMA mode. Cc: xe-kernel@external.cisco.com Signed-off-by: Shikha Jain <shikjain@cisco.com> Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-25drivers: ata: wake port before DMA stop for ALPMDanesh Petigara4-1/+25
The AHCI driver code stops and starts port DMA engines at will without considering the power state of the particular port. The AHCI specification isn't very clear on how to handle this scenario, leaving implementation open to interpretation. Broadcom's STB SATA host controller is unable to handle port DMA controller restarts when the port in question is in low power mode. When a port enters partial or slumber mode, its PHY is powered down. When a controller restart is requested, the controller's internal state machine expects the PHY to be brought back up by software which never happens in this case, resulting in failures. To avoid this situation, logic is added to manually wake up the port just before its DMA engine is stopped, if the port happens to be in a low power state. HBA initiated power management ensures that the port eventually returns to its configured low power state, when the link is idle (as per the conditions listed in the spec). A new host flag is also added to ensure this logic is only exercised for hosts with the above limitation. tj: Formatting changes. Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-24Linux 4.5-rc1Linus Torvalds1-2/+2
2016-01-24ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi listJosh Boyer1-0/+7
Like the Yoga 900 models the Lenovo Yoga 700 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272 Tested-by: <dinyar.rabady+spam@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-24MAINTAINERS: Combine multiple telemetry entriesSouvik Kumar Chakravarty1-3/+1
This patch combines all the telemetry file entries in MAINTAINERS via wildcard. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-24intel_telemetry_debugfs: Fix unused warnings in telemetry debugfsSouvik Kumar Chakravarty1-0/+2
This patch fixes compile time warnings when CONFIG_PM_SLEEP is undefined. In this case sleep related counters are unused. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-24vmstat: Remove BUG_ON from vmstat_updateChristoph Lameter1-11/+1
If we detect that there is nothing to do just set the flag and do not check if it was already set before. Races really do not matter. If the flag is set by any code then the shepherd will start dealing with the situation and reenable the vmstat workers when necessary again. Since commit 0eb77e988032 ("vmstat: make vmstat_updater deferrable again and shut down on idle") quiet_vmstat might update cpu_stat_off and mark a particular cpu to be handled by vmstat_shepherd. This might trigger a VM_BUG_ON in vmstat_update because the work item might have been sleeping during the idle period and see the cpu_stat_off updated after the wake up. The VM_BUG_ON is therefore misleading and no more appropriate. Moreover it doesn't really suite any protection from real bugs because vmstat_shepherd will simply reschedule the vmstat_work anytime it sees a particular cpu set or vmstat_update would do the same from the worker context directly. Even when the two would race the result wouldn't be incorrect as the counters update is fully idempotent. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-24MIPS: zboot: Add support for serial debug using the PROMAlban Bedel3-0/+12
As most platforms implement the PROM serial interface prom_putchar() add a simple bridge to allow re-using this code for zboot. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: zboot: Avoid useless rebuildsAlban Bedel1-6/+8
Add dummy.o to the targets list, and fill targets automatically from $(vmlinuzobjs) to avoid having to maintain two lists. When building with XZ compression copy ashldi3.c to the build directory to use a different object file for the kernel and zboot. Without this the same object file need to be build with different flags which cause a rebuild at every run. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIBFlorian Fainelli1-0/+1
Allow BMIPS_GENERIC supported platforms to build GPIO controller drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Cc: gregory.0xf0@gmail.com Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() functionSimon Arlott2-13/+0
Remove bcm63xx_nvram_get_psi_size() as it now has no users. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Update bcm_tag field image_sequenceSimon Arlott1-6/+5
The "dual_image" and "inactive_flag" fields should be merged into a single "image_sequence" field. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11834/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Move extended flash address to bcm_tag header fileSimon Arlott2-4/+7
The extended flash address needs to be subtracted from bcm_tag flash image offsets. Move this value to the bcm_tag header file. Renamed define name to consistently use bcm963xx for flash layout which should be considered a property of the board and not the SoC (i.e. bcm63xx could theoretically be used on a board without CFE or any flash). Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11833/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structureSimon Arlott3-4/+7
Move Broadcom BCM963xx image tag data structure to include/linux/ so that drivers outside of mach-bcm63xx can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm63xx: nvram: Use nvram structure definition from header fileSimon Arlott1-32/+3
Use the common definition of the nvram structure from the header file include/linux/bcm963xx_nvram.h instead of maintaining a separate copy. Read the version 5 size of nvram data from memory and then call the new checksum verification function from the header file. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structureSimon Arlott2-0/+113
Broadcom BCM963xx boards have multiple nvram variants across different SoCs with additional checksum fields added whenever the size of the nvram was extended. Add this structure as a header file so that multiple drivers can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11830/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MAINTAINERS: Add KVM for MIPS entryJames Hogan1-0/+8
I've pretty much been maintaining KVM for MIPS for a while now. Lets make it more official (and make sure I get Cc'd on relevant patches). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11898/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Add missing newline to kvm_err()James Hogan1-1/+1
Add missing newline to end of kvm_err string when guest PMAP couldn't be allocated. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move KVM specific opcodes into asm/inst.hJames Hogan4-28/+5
The header arch/mips/kvm/opcode.h defines a few extra opcodes which aren't in arch/mips/include/uapi/asm/inst.h. There's nothing KVM specific about them, so lets move them into inst.h where they belong and delete the header. Note that mfmcz_op is renamed to mfmc0_op to match the instruction set manual, and wait_op was already added to inst.h in commit b0a3eae2b943 ("MIPS: inst.h: define COP0 wait op"), merged in v3.16-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Use cacheops.h definitionsJames Hogan1-22/+8
Drop the custom cache operation code definitions used by KVM for emulating guest CACHE instructions, and switch to use the existing definitions in <asm/cacheops.h>. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11893/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Break down cacheops.h definitionsJames Hogan1-42/+64
Most of the cache op codes defined in cacheops.h are split into a 2-bit cache identifier, and a 3-bit cache op code which does largely the same thing semantically regardless of the cache identifier. To allow the use of these definitions by KVM for decoding cache ops, break the definitions down into parts where it makes sense to do so, and add masks for the Cache and Op field within the cache op. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Use EXCCODE_ constants with set_except_vector()James Hogan2-30/+30
The first argument to set_except_vector is the ExcCode, which we now have definitions for. Lets make use of them. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Update trap codesJames Hogan1-2/+10
Add a few missing trap codes. [ralf@linux-mips.org: Drop removal of exception codes. I don't care what the incomplete architecture spec says; it can't change existing hardware and VCEI is supported indeed.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move Cause.ExcCode trap codes to mipsregs.hJames Hogan5-83/+80
Move the Cause.ExcCode trap code definitions from kvm_host.h to mipsregs.h, since they describe architectural bits rather than KVM specific constants, and change the prefix from T_ to EXCCODE_. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Make kvm_mips_{init,exit}() staticJames Hogan1-2/+2
The module init and exit functions have no need to be global, so make them static. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Refactor added offsetof()sJames Hogan1-7/+3
When calculating the offsets into the commpage for dynamically translated mtc0/mfc0 guest instructions, multiple offsetof()s are added together to find the offset of the specific register in the mips_coproc, within the commpage. Simplify each of these cases to a single offsetof() to find the offset of the specific register within the commpage. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Convert EXPORT_SYMBOL to _GPLJames Hogan2-19/+19
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop unused kvm_mips_host_tlb_inv_index()James Hogan2-38/+0
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move definition of DC bit to mipsregs.hJames Hogan2-3/+2
The CAUSEB_DC and CAUSEF_DC definitions used by KVM are defined in asm/kvm_host.h, but all the other Cause register field definitions are found in asm/mipsregs.h. Lets reunite the DC bit definitions with its friends in mipsregs.h. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop some unused definitions from kvm_host.hJames Hogan1-5/+0
Some definitions in the MIPS asm/kvm_host.h are completely unused, so lets drop them. MS_TO_NS is no longer used since commit e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation"). The others don't appear ever to have been used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Trivial whitespace and style fixesJames Hogan5-15/+14
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>