aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-23HID: magicmouse: make transfer buffers DMA capableBenjamin Tissoires1-2/+10
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: lg: make transfer buffers DMA capableBenjamin Tissoires1-4/+10
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. [jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by 0day build bot] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: cp2112: make transfer buffers DMA capableBenjamin Tissoires1-36/+79
Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. Use a spinlock to prevent concurrent accesses to the buffer. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: sensor: fix attributes in HID sensor interfaceOoi, Joyce1-3/+3
User is unable to access to input-X-yyy and feature-X-yyy where X is a hex value and more than 9 (e.g. input-a-yyy, feature-b-yyy) in HID sensor custom sysfs interface. This is because when creating the attribute, the attribute index is written to using %x (hex). However, when reading and writing values into the attribute, the attribute index is scanned using %d (decimal). Hence, user is unable to access to attributes with index in hex values (e.g. 'a', 'b', 'c') but able to access to attributes with index in decimal values (e.g. 1, 2, 3,..). This fix will change input-%d-%x-%s and feature-%d-%x-%s to input-%x-%x-%s and feature-%x-%x-%s in show_values() and store_values() accordingly. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: request_irq failureSrinivas Pandruvada1-1/+1
On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Fix driver reinit failureEven Xu1-0/+15
When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Move DMA disable code to new functionEven Xu1-10/+32
Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: consolidate ish wake up operationEven Xu1-19/+26
Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: usbhid: add ATEN CS962 to list of quirky devicesOliver Neukum2-0/+2
Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: intel-ish-hid: Fix !CONFIG_PM build warningBorislav Petkov1-2/+2
Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: sensor-hub: Fix packing of result buffer for feature reportSrinivas Pandruvada1-1/+14
When report count is more than one and report size is not 4 bytes, then we need some packing into result buffer from the caller of function sensor_hub_get_feature. By default the value extracted from a field is 4 bytes from hid core (using hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT)), even if report size if less than 4 byte. So when we copy data to user buffer in sensor_hub_get_feature, we need to only copy report size bytes even when report count is more than 1. This is not an issue for most of the sensor hub fields as report count will be 1 where we already copy only report size bytes, but some string fields like description, it is a problem as the report count will be more than 1. For example: Field(6) Physical(Sensor.OtherCustom) Application(Sensor.Sensor) Usage(11) Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Report Size(16) Report Count(11) Here since the report size is 2 bytes, we will have 2 additional bytes of 0s copied into user buffer, if we directly copy to user buffer from report->field[]->value This change will copy report size bytes into the buffer of caller for each usage report->field[]->value. So for example without this change, the data displayed for a custom sensor field "sensor-model": 76 00 101 00 110 00 111 00 118 00 111 (truncated to report count of 11) With change 76 101 110 111 118 111 32 89 111 103 97 ("Lenovo Yoga" in ASCII ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: add quirk for Akai MIDImix.Steinar H. Gunderson2-0/+4
The Akai MIDImix (09e8:0031) is a MIDI fader controller that speaks regular MIDI and works well with Linux. However, initialization gets delayed due to reports timeout: [3643645.631124] hid-generic 0003:09E8:0031.0020: timeout initializing reports [3643645.632416] hid-generic 0003:09E8:0031.0020: hiddev0: USB HID v1.11 Device [AKAI MIDI Mix] on usb-0000:00:14.0-2/input0 Adding "usbhid.quirks=0x09e8:0x0031:0x20000000" on the kernel command line makes the issues go away. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10Revert "HID: dragonrise: fix HID Descriptor for 0x0006 PID"Ioan-Adrian Ratiu1-58/+0
This reverts commit 18339f59c3a6 ("HID: dragonrise: fix HID...") because it breaks certain dragonrise 0079:0006 gamepads. While it may fix a breakage caused by commit 79346d620e9d ("HID: input: force generic axis to be mapped to their user space axis"), it is probable that the manufacturer released different hardware with the same PID so this fix works for only a subset and breaks the other gamepads sharing the PID. What is needed is another more generic solution which fixes 79346d620e9d ("HID: input: force generic axis ...") breakage for this controller: we need to add an exception for this driver to make it keep the old behaviour previous to the initial breakage (this is done in patch 2 of this series). Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: hid-dr: add input mapping for axis selectionIoan-Adrian Ratiu1-0/+25
Commit 79346d620e9d ("HID: input: force generic axis to be mapped to their user space axis") made mapping generic axes to their userspace equivalents mandatory and some lower end gamepads which were depending on the previous behaviour suffered severe regressions because they were reusing axes and expecting hid-input to multiplex their map to the respective userspace axis by always searching for and using the next available axis. One solution is to add a hid quirk for this type of "previous" behaviour in hid-input to bypass the new axes policy in favour of the old one, but since only one hardware vendor seems to be affected negatively we're better off making and exception and mapping in the driver for now; if more vendors or drivers turn out to experience the problem we should reconsider the quirk solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: hid-led: fix issue with transfer buffer not being dma capableHeiner Kallweit1-4/+19
The hid-led driver works fine under 4.8.0, however with the next kernel from today I get this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2578 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x373/0x550 [usbcore] transfer buffer not dma capable Modules linked in: hid_led(+) usbhid vfat fat ir_sony_decoder iwlmvm led_class mac80211 snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal iwlwifi crc32c_intel snd_hda_codec_hdmi i2c_i801 i2c_smbus snd_hda_intel cfg80211 snd_hda_codec snd_hda_core snd_pcm r8169 snd_timer mei_me mii snd mei ir_lirc_codec lirc_dev nuvoton_cir rc_core btusb btintel bluetooth rfkill usb_storage efivarfs ipv6 ehci_pci ehci_hcd xhci_pci xhci_hcd usbcore usb_common ext4 jbd2 mbcache ahci libahci libata CPU: 0 PID: 2578 Comm: systemd-udevd Not tainted 4.8.0-rc8-next-20161003 #1 Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 ffffc90003dbb7e0 ffffffff81280425 ffffc90003dbb830 0000000000000000 ffffc90003dbb820 ffffffff8105b086 0000063003dbb800 ffff88006f374480 0000000000000000 0000000000000000 0000000000000001 ffff880079544000 Call Trace: [<ffffffff81280425>] dump_stack+0x68/0x93 [<ffffffff8105b086>] __warn+0xc6/0xe0 [<ffffffff8105b0ea>] warn_slowpath_fmt+0x4a/0x50 [<ffffffffa0143a43>] usb_hcd_map_urb_for_dma+0x373/0x550 [usbcore] [<ffffffffa01441b6>] usb_hcd_submit_urb+0x316/0x9c0 [usbcore] [<ffffffff810bce80>] ? rcu_read_lock_sched_held+0x40/0x80 [<ffffffff810e0043>] ? module_assert_mutex_or_preempt+0x13/0x50 [<ffffffff810e0c07>] ? __module_address+0x27/0xf0 [<ffffffffa01456e4>] usb_submit_urb+0x2c4/0x520 [usbcore] [<ffffffffa0145fea>] usb_start_wait_urb+0x5a/0xe0 [usbcore] [<ffffffffa014612c>] usb_control_msg+0xbc/0xf0 [usbcore] [<ffffffff810e0c07>] ? __module_address+0x27/0xf0 [<ffffffffa079a724>] usbhid_raw_request+0xa4/0x180 [usbhid] [<ffffffffa07a93b1>] hidled_recv+0x71/0xe0 [hid_led] [<ffffffffa07a947d>] thingm_init+0x2d/0x50 [hid_led] [<ffffffffa07a969b>] hidled_probe+0xcb/0x24a [hid_led] [<ffffffff814d96f2>] hid_device_probe+0xd2/0x150 [<ffffffff8146023d>] driver_probe_device+0x1fd/0x2c0 [<ffffffff8146039a>] __driver_attach+0x9a/0xa0 [<ffffffff81460300>] ? driver_probe_device+0x2c0/0x2c0 [<ffffffff8145e25d>] bus_for_each_dev+0x5d/0x90 [<ffffffff8145fa79>] driver_attach+0x19/0x20 [<ffffffff8145f5ff>] bus_add_driver+0x11f/0x220 [<ffffffffa07ac000>] ? 0xffffffffa07ac000 [<ffffffff8146086b>] driver_register+0x5b/0xd0 [<ffffffffa07ac000>] ? 0xffffffffa07ac000 [<ffffffff814d83d1>] __hid_register_driver+0x61/0xa0 [<ffffffffa07ac01e>] hidled_driver_init+0x1e/0x20 [hid_led] [<ffffffff81000408>] do_one_initcall+0x38/0x150 [<ffffffff810bce80>] ? rcu_read_lock_sched_held+0x40/0x80 [<ffffffff81194ca0>] ? kmem_cache_alloc_trace+0x1d0/0x230 [<ffffffff811342f9>] do_init_module+0x5a/0x1cb [<ffffffff810e3862>] load_module+0x1e42/0x2530 [<ffffffff810e0990>] ? __symbol_put+0x50/0x50 [<ffffffff810dfc50>] ? show_coresize+0x30/0x30 [<ffffffff811ad650>] ? kernel_read_file+0x100/0x190 [<ffffffff811ad794>] ? kernel_read_file_from_fd+0x44/0x70 [<ffffffff810e415a>] SYSC_finit_module+0xba/0xc0 [<ffffffff810e4179>] SyS_finit_module+0x9/0x10 [<ffffffff815e082a>] entry_SYSCALL_64_fastpath+0x18/0xad ---[ end trace c9e6ea27003ecf9e ]--- Fix this by using a kmalloc'ed buffer when calling hid_hw_raw_request. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-06xen/x86: Update topology map for PV VCPUsBoris Ostrovsky1-0/+6
Early during boot topology_update_package_map() computes logical_pkg_ids for all present processors. Later, when processors are brought up, identify_cpu() updates these values based on phys_pkg_id which is a function of initial_apicid. On PV guests the latter may point to a non-existing node, causing logical_pkg_ids to be set to -1. Intel's RAPL uses logical_pkg_id (as topology_logical_package_id()) to index its arrays and therefore in this case will point to index 65535 (since logical_pkg_id is a u16). This could lead to either a crash or may actually access random memory location. As a workaround, we recompute topology during CPU bringup to reset logical_pkg_id to a valid value. (The reason for initial_apicid being bogus is because it is initial_apicid of the processor from which the guest is launched. This value is CPUID(1).EBX[31:24]) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-06backlight: pwm_bl: Handle gpio that can sleepMaxime Ripard1-2/+2
Some backlight GPIOs might be connected to some i2c based expanders whose access might sleep. Since it's not in any critical path, use the cansleep variant of the GPIO API. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-06backlight-tosa: Delete unnecessary assignment for the field "owner"Markus Elfring1-1/+0
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-06ARM: fix delaysRussell King1-1/+1
Commit 215e362dafed ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") tried to increase the bogomips limitation, but in doing so messed up udelay such that it always gives about a 5% error in the delay, even if we use a timer. The calculation is: loops = UDELAY_MULT * us_delay * ticks_per_jiffy >> UDELAY_SHIFT Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT 30. Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000 (eg, 166MHz timer, 1ms delay) this would calculate: ((UL(2199023) * HZ) >> 11) * 1000 * 1660000 >> 30 => 165999 With the new values of 2047 * HZ + 483648 * HZ / 1000000 and 31, we get: (2047 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 158269 which is incorrect. This is due to a typo - correcting it gives: (2147 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 165999 i.o.w, the original value. Fixes: 215e362dafed ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") Cc: <stable@vger.kernel.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-06sparc: fixing ident and beautifying codenetmonk@netmonk.org1-28/+24
Good evening, Following LinuxCodingStyle documentation and with the help of Sam, fixed severals identation issues in the code, and few others cosmetic changes And last and i hope least fixing my name :) Signed-off-by : Dominique Carrel <netmonk@netmonk.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc64: Enable setting "relaxed ordering" in IOMMU mappingschris hyser2-1/+16
Enable relaxed ordering for memory writes in IOMMU TSB entry from dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O Translation Services version 2.0 API. Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing other memory writes) for various DMA buffers. A notable exception is the Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have little performance impact there. On SPARC HW however, this results in major performance degradation getting only about 3Gbps. Enabling RO in the IOMMU entries corresponding to mlx4 data buffers increases the throughput to about 13 Gbps. Orabug: 19245907 Signed-off-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc64: Enable PCI IOMMU version 2 APIchris hyser1-10/+26
Enable Version 2 of the PCI IOMMU API needed for advanced features such as PCI Relaxed Ordering and greater than 2 GB DMA address space per root complex. Signed-off-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc: migrate exception table users off module.h and onto extable.hPaul Gortmaker5-5/+5
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-05phy: micrel.c: Enable ksz9031 energy-detect power-down modeMike Looijmans1-0/+21
Set bit 0 in register 1C.23 to enable the EDPD feature of the KSZ9031 PHY. This reduces power consumption when the link is down. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-05netfilter: merge fixup for "nf_tables_netdev: remove redundant ip_hdr assignment"Stephen Rothwell1-1/+0
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-05mm: filemap: fix mapping->nrpages double accounting in fuseJohannes Weiner1-1/+0
Commit 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") switched replace_page_cache() from raw radix tree operations to page_cache_tree_insert() but didn't take into account that the latter function, unlike the raw radix tree op, handles mapping->nrpages. As a result, that counter is bumped for each page replacement rather than balanced out even. The mapping->nrpages counter is used to skip needless radix tree walks when invalidating, truncating, syncing inodes without pages, as well as statistics for userspace. Since the error is positive, we'll do more page cache tree walks than necessary; we won't miss a necessary one. And we'll report more buffer pages to userspace than there are. The error is limited to fuse inodes. Fixes: 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05mm: filemap: don't plant shadow entries without radix tree nodeJohannes Weiner3-30/+36
When the underflow checks were added to workingset_node_shadow_dec(), they triggered immediately: kernel BUG at ./include/linux/swap.h:276! invalid opcode: 0000 [#1] SMP Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6 soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 task: ffff8faa93ecd940 task.stack: ffff8faa7f478000 RIP: page_cache_tree_insert+0xf1/0x100 Call Trace: __add_to_page_cache_locked+0x12e/0x270 add_to_page_cache_lru+0x4e/0xe0 mpage_readpages+0x112/0x1d0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1ad/0x290 force_page_cache_readahead+0xaa/0x100 page_cache_sync_readahead+0x3f/0x50 generic_file_read_iter+0x5af/0x740 blkdev_read_iter+0x35/0x40 __vfs_read+0xe1/0x130 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x13/0x8f Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00 RIP page_cache_tree_insert+0xf1/0x100 This is a long-standing bug in the way shadow entries are accounted in the radix tree nodes. The shrinker needs to know when radix tree nodes contain only shadow entries, no pages, so node->count is split in half to count shadows in the upper bits and pages in the lower bits. Unfortunately, the radix tree implementation doesn't know of this and assumes all entries are in node->count. When there is a shadow entry directly in root->rnode and the tree is later extended, the radix tree implementation will copy that entry into the new node and and bump its node->count, i.e. increases the page count bits. Once the shadow gets removed and we subtract from the upper counter, node->count underflows and triggers the warning. Afterwards, without node->count reaching 0 again, the radix tree node is leaked. Limit shadow entries to when we have actual radix tree nodes and can count them properly. That means we lose the ability to detect refaults from files that had only the first page faulted in at eviction time. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05DT: irqchip: renesas-irqc: document R8A7743/5 supportSergei Shtylyov1-1/+3
Renesas RZ/G SoC have the R-Car gen2 compatible IRQC interrupt controllers. Document RZ/G1[ME] (also known as R8A774[35]) SoC bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2016-10-05dt-bindings: Add Keith&Koep vendor prefixMarek Vasut1-0/+1
Add vendor prefix for Keith&Koep GmbH , http://keith-koep.com/en/ Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> [robh: fix alphabetizing] Signed-off-by: Rob Herring <robh@kernel.org>
2016-10-05xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlierBoris Ostrovsky1-1/+2
xen_cpuhp_setup() calls mutex_lock() which, when CONFIG_DEBUG_MUTEXES is defined, ends up calling xen_save_fl(). That routine expects per_cpu(xen_vcpu, 0) to be already initialized. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-05async_pq_val: fix DMA memory leakJustin Maggard1-4/+4
Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync. Fixes: 1786b943dad0 ("async_pq_val: convert to dmaengine_unmap_data") Signed-off-by: Justin Maggard <jmaggard@netgear.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-04mlxsw: switchx2: Fix misuse of hard_header_lenYotam Gigi1-1/+1
In order to specify that the mlxsw switchx2 driver needs additional headroom for packets, there have been use of the hard_header_len field of the netdevice struct. This commit changes that to use needed_headroom instead, as this is the correct way to do that. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04mlxsw: spectrum: Fix misuse of hard_header_lenYotam Gigi1-1/+1
In order to specify that the mlxsw spectrum driver needs additional headroom for packets, there have been use of the hard_header_len field of the netdevice struct. This commit changes that to use needed_headroom instead, as this is the correct way to do that. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04x86/PCI: VMD: Move VMD driver to drivers/pci/hostKeith Busch5-15/+17
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jon Derrick <jonathan.derrick@intel.com>
2016-10-04PCI: rockchip: Fix wrong transmitted FTS countShawn Lin1-0/+10
If the expected number of FTS aren't received by RC when exiting from L0s, the LTSSM will fall into recover state, which means it will need to send TS for retraining which makes the latency of exiting from L0s a little longer than expected. This issue is caused by an incorrect reset value of FTS count on PLC1 register (offset 0x4). The expected value for Gen1/2 should be more than 240 and we may leave a little margin here. Fix this before starting Gen1 training which will make TS1 contain the correct FTS count. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-04PCI: rockchip: Improve the deassert sequence of four reset pinsShawn Lin1-6/+10
Per TRM, we need to deassert the four reset pins simultaneously. Currently the reset framework doesn't support that so we did it one by one. It seems no side effect found but it does impact the state machine of controller, so sometimes the change speed bit is not set when sending training sequence from recover state. After the silicon RTL review from SoC guys, we don't need to do the sequence recommended by TRM, and could just move the deassert of mgmt_sticky_rst to the first place. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-04PCI: rockchip: Increase the Max Credit update intervalRajat Jain1-0/+17
Increase the likelihood of link state to automatically go to L1 and save some power. The default credit update interval of 7.5 us results in the rootport sending UpdateFC-P and UpdateFC-NP packets too often, thus resulting in the link never going to L1, and always staying in L0/L0s. The value 24 us was chosen after some experiments and peeking over the PCIe bus to see that we do enter L1 substate when there is not enough traffic on the PCIe bus. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2016-10-04PCI: rcar: Try increasing PCIe link speed to 5 GT/s at bootSergei Shtylyov1-0/+66
The PCIe link speed is initially set to 2.5 GT/s. Try to increase the link speed to 5 GT/s. Based on original patch by Grigory Kletsko <grigory.kletsko@cogentembedded.com>. [bhelgaas: remove "Trying speed up" message, remove unused SPCHG] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-04mfd: arizona: Handle probe deferral for reset GPIOCharles Keepax1-4/+9
The Arizona CODECs will generally function correctly without a reset line although it is strongly advised to have one, as such we do allow the system to boot if the reset gpio is missing or incorrectly specified. However we should fail probe if we get a probe deferral request, this patch adds handling for this case. Reported-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Remove arizona_of_get_named_gpio helper functionCharles Keepax2-23/+7
This function is only used in a single place and no new users will be added as all the devices other required GPIOs are already handled. As such just merge the code back into the calling function. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-10-04mfd: arizona: Add DT options for max_channels_clocked and PDM speaker configRichard Fitzgerald2-0/+48
This patch adds DT settings for the max_channels_clocked, spk_fmt and spk_mute pdata. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl6040: Register child device for twl6040-pdmclkPeter Ujfalusi3-1/+7
The McPDM in OMAP4/5 is using the pdmclk from twl6040 as functional clock. The twl6040-pdmclk driver provides a clock which can be used to make sure that the pdmclk is active when the McPDM is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: cros_ec_spi: Remove unused variable 'request'Lee Jones1-2/+0
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: omap-usb-host: Return value is not 'const int'Lee Jones1-1/+1
Change from 'const int' to just 'int'. Cc: <robh+dt@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()Lee Jones1-9/+1
There are no other functions which can over-ride it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()Lee Jones1-54/+0
Doesn't appear to be used. No call sites exist. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() callsLee Jones3-34/+0
There are no call sites for these functions. Strip them out. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Prevent initialised field from being over-writtenLee Jones2-29/+23
Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max8997-irq: 'inline' should be at the beginning of the declarationLee Jones1-1/+1
Reported by [-Wold-style-declaration]. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializerArnd Bergmann1-1/+1
When building with -Woverride-init, we get a warning about an incorrect initializer: drivers/mfd/rk808.c:244:8: error: initialized field overwritten [-Werror=override-init] [RK818_IRQ_DISCHG_ILIM] = { This is clearly a mistake, as both RK818_IRQ_DISCHG_ILIM and RK818_IRQ_USB_OV are defined as '7', but they refer to different register bits. Changing RK818_IRQ_DISCHG_ILIM to 15 is consistent with how all other 14 interrupts are handled here, so I'm assuming this is what it should have been. Fixes: 2eedcbfc0612 ("mfd: rk808: Add RK818 support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.