| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Like machine__findnew_module_dso(), it should set necessary info for
kernel modules to find symbol info from the file. Factor out
dso__set_module_info() to do it.
This is needed for dso__needs_decompress() to detect such DSOs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf processes build-id event, it creates DSOs with the build-id.
But it didn't set the module short name (like '[module-name]') so when
processing a kernel mmap event of the module, it cannot found the DSO as
it only checks the short names.
That leads for perf to create a same DSO without the build-id info and
it'll lookup the system path even if the DSO is already in the build-id
cache. After kernel was updated, perf cannot find the DSO and cannot
show symbols in it anymore.
You can see this if you have an old data file (w/ old kernel version):
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols
...
The second message didn't show the build-id. With this patch:
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
/lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols
...
Now it shows the build-id but still cannot load the symbol table. This
is a different problem which will be fixed in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org
[ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Only print the NMI watchdog hint when that watchdog it actually enabled.
This avoids printing these unnecessarily.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-lnw7edxnqsphkmeew857wz1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf annotate' is dropping the cr* fields from branch instructions.
Fix it by adding support to display branch instructions having
multiple operands.
Power Arch objdump of int_sqrt:
20.36 | c0000000004d2694: subf r10,r10,r3
| c0000000004d2698: v bgt cr6,c0000000004d26a0 <int_sqrt+0x40>
1.82 | c0000000004d269c: mr r3,r10
29.18 | c0000000004d26a0: mr r10,r8
| c0000000004d26a4: v bgt cr7,c0000000004d26ac <int_sqrt+0x4c>
| c0000000004d26a8: mr r10,r7
Power Arch Before Patch:
20.36 | subf r10,r10,r3
| v bgt 40
1.82 | mr r3,r10
29.18 | 40: mr r10,r8
| v bgt 4c
| mr r10,r7
Power Arch After patch:
20.36 | subf r10,r10,r3
| v bgt cr6,40
1.82 | mr r3,r10
29.18 | 40: mr r10,r8
| v bgt cr7,4c
| mr r10,r7
Also support AArch64 conditional branch instructions, which can
have up to three operands:
Aarch64 Non-simplified (raw objdump) view:
│ffff0000083cd11c: ↑ cbz w0, ffff0000083cd100 <security_fil▒
...
4.44 │ffff000│083cd134: ↓ tbnz w0, #26, ffff0000083cd190 <securit▒
...
1.37 │ffff000│083cd144: ↓ tbnz w22, #5, ffff0000083cd1a4 <securit▒
│ffff000│083cd148: mov w19, #0x20000 //▒
1.02 │ffff000│083cd14c: ↓ tbz w22, #2, ffff0000083cd1ac <securit▒
...
0.68 │ffff000└──3cd16c: ↑ cbnz w0, ffff0000083cd120 <security_fil▒
Aarch64 Simplified, before this patch:
│ ↑ cbz 40
...
4.44 │ │↓ tbnz w0, #26, ffff0000083cd190 <security_file_permiss▒
...
1.37 │ │↓ tbnz w22, #5, ffff0000083cd1a4 <security_file_permiss▒
│ │ mov w19, #0x20000 // #131072
1.02 │ │↓ tbz w22, #2, ffff0000083cd1ac <security_file_permiss▒
...
0.68 │ └──cbnz 60
the cbz operand is missing, and the tbz doesn't get simplified processing
at all because the parsing function failed to match an address.
Aarch64 Simplified, After this patch applied:
│ ↑ cbz w0, 40
...
4.44 │ │↓ tbnz w0, #26, d0
...
1.37 │ │↓ tbnz w22, #5, e4
│ │ mov w19, #0x20000 // #131072
1.02 │ │↓ tbz w22, #2, ec
...
0.68 │ └──cbnz w0, 60
Originally-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@samba.org>
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170601092959.f60d98912e8a1b66fd1e4c0e@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this
reason perf trace can't find the proper syscall event to get args format
from and displays it wrongly as 'continued'.
To fix that fill the "alias" field with "old_mmap" for trace's mmap record
to get the correct translation.
Before:
0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0
0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000
0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6
After:
0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0
0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000
0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When filename contains special chars, perf annotate fails
with an error:
$ perf annotate --vmlinux ./vmlinux\(test\) --stdio native_safe_halt
sh: -c: line 0: syntax error near unexpected token `('
sh: -c: line 0: `objdump --start-address=0xffffffff8184e840
--stop-address=0xffffffff8184e848 -l -d --no-show-raw -S -C
./vmlinux(test) 2>/dev/null|grep -v ./vmlinux(test):|expand'
Fix it by surrounding filename in double quotes.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adam Stylinski <adam.stylinski@etegent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170505101417.2117-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sync (copy) the following v4.12 kernel headers to the tooling headers:
arch/x86/include/asm/disabled-features.h:
arch/x86/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
- 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
fortunately none of the (in-kernel) tooling relied on it
- new KVM_DEV calls added
arch/x86/include/asm/required-features.h:
- 5-level paging hardware ABI detail added
arch/x86/include/asm/cpufeatures.h:
- new CPU feature added
arch/x86/include/uapi/asm/vmx.h:
- new VMX exit conditions
None of the changes requires fixes in the tooling source code.
This addresses the following warnings:
Warning: include/uapi/linux/stat.h differs from kernel
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/required-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The __hpp__sort_acc() sorts entries using callchain depth in order to
put callers above in children mode. But it assumed the callchain order
was callee-first. Now default (for children) is caller-first so the
order of entries is reverted.
For example, consider following case:
$ perf report --no-children
..l
# Overhead Command Shared Object Symbol
# ........ ....... ................... ..........................
#
99.44% a.out a.out [.] main
|
---main
__libc_start_main
_start
Then children mode should show 'start' above '__libc_start_main' since
it's the caller (parent) of the __libc_start_main. But it's reversed:
# Children Self Command Shared Object Symbol
# ........ ........ ....... ............... .....................
#
99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main
99.61% 0.00% a.out a.out [.] _start
99.54% 99.44% a.out a.out [.] main
This patch fixes it.
# Children Self Command Shared Object Symbol
# ........ ........ ....... ............... .....................
#
99.61% 0.00% a.out a.out [.] _start
99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main
99.54% 99.44% a.out a.out [.] main
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The very last inlined frame, i.e. the one furthest away from the
non-inlined frame, was silently dropped. This is apparent when
comparing the output of `perf script` and `addr2line`:
~~~~~~
$ perf script --inline
...
a.out 26722 80836.309329: 72425 cycles:
21561 __hypot_finite (/usr/lib/libm-2.25.so)
ace3 hypot (/usr/lib/libm-2.25.so)
a4a main (a.out)
std::abs<double>
std::_Norm_helper<true>::_S_do_it<double>
std::norm<double>
main
20510 __libc_start_main (/usr/lib/libc-2.25.so)
bd9 _start (a.out)
$ addr2line -a -f -i -e /tmp/a.out a4a | c++filt
0x0000000000000a4a
std::__complex_abs(doublecomplex )
/usr/include/c++/6.3.1/complex:589
double std::abs<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:597
double std::_Norm_helper<true>::_S_do_it<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:654
double std::norm<double>(std::complex<double> const&)
/usr/include/c++/6.3.1/complex:664
main
/tmp/inlining.cpp:14
~~~~~
Note how `std::__complex_abs` is missing from the `perf script`
output. This is similarly showing up in `perf report`. The patch
here fixes this issue, and the output becomes:
~~~~~
a.out 26722 80836.309329: 72425 cycles:
21561 __hypot_finite (/usr/lib/libm-2.25.so)
ace3 hypot (/usr/lib/libm-2.25.so)
a4a main (a.out)
std::__complex_abs
std::abs<double>
std::_Norm_helper<true>::_S_do_it<double>
std::norm<double>
main
20510 __libc_start_main (/usr/lib/libc-2.25.so)
bd9 _start (a.out)
~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-7-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So far, the inlined nodes where only reversed when we built perf
against libbfd. If that was not available, the addr2line fallback
code path was missing the inline_list__reverse call.
Now we always add the nodes in the correct order within
inline_list__append. This removes the need to reverse the list
and also ensures that all callers construct the list in the right
order.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-6-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The --inline option is to show inlined functions in callchains.
For example:
$ perf script
a.out 5644 11611.467597: 309961 cycles:u:
790 main (/home/namhyung/tmp/perf/a.out)
20511 __libc_start_main (/usr/lib/libc-2.25.so)
8ba _start (/home/namhyung/tmp/perf/a.out)
...
$ perf script --inline
a.out 5644 11611.467597: 309961 cycles:u:
790 main (/home/namhyung/tmp/perf/a.out)
std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()
std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
main
20511 __libc_start_main (/usr/lib/libc-2.25.so)
8ba _start (/home/namhyung/tmp/perf/a.out)
...
Reviewed-and-tested-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-5-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.
This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:
~~~~~~~~~~~~~~~
#include <thread>
#include <chrono>
using namespace std;
int main()
{
this_thread::sleep_for(chrono::milliseconds(1000));
this_thread::sleep_for(chrono::milliseconds(100));
this_thread::sleep_for(chrono::milliseconds(10));
return 0;
}
~~~~~~~~~~~~~~~
Now compile and record it:
~~~~~~~~~~~~~~~
g++ -std=c++11 -g -O2 test.cpp
echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
perf record \
--event sched:sched_stat_sleep \
--event sched:sched_process_exit \
--event sched:sched_switch --call-graph=dwarf \
--output perf.data.raw \
./a.out
echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~
Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:9
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:10
| __libc_start_main
| _start
|
--0.91%--main test.cpp:13
__libc_start_main
_start
~~~~~~~~~~~~~~~
With this patch here applied, the issue is fixed. The report becomes
much more usable:
~~~~~~~~~~~~~~~
Overhead Source:Line
........ ...........
100.00% core.c:0
|
---__schedule core.c:0
schedule
do_nanosleep hrtimer.c:0
hrtimer_nanosleep
sys_nanosleep
entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
__nanosleep_nocancel .:0
std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
|
|--90.08%--main test.cpp:8
| __libc_start_main
| _start
|
|--9.01%--main test.cpp:9
| __libc_start_main
| _start
|
--0.91%--main test.cpp:10
__libc_start_main
_start
~~~~~~~~~~~~~~~
Similarly it works for signal frames:
~~~~~~~~~~~~~~~
__noinline void bar(void)
{
volatile long cnt = 0;
for (cnt = 0; cnt < 100000000; cnt++);
}
__noinline void foo(void)
{
bar();
}
void sig_handler(int sig)
{
foo();
}
int main(void)
{
signal(SIGUSR1, sig_handler);
raise(SIGUSR1);
foo();
return 0;
}
~~~~~~~~~~~~~~~~
Before, the report wrongly points to `signal.c:29` after raise():
~~~~~~~~~~~~~~~~
$ perf report --stdio --no-children -g srcline -s srcline
...
100.00% signal.c:11
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:29
__libc_start_main
_start
~~~~~~~~~~~~~~~~
With this patch in, the issue is fixed and we instead get:
~~~~~~~~~~~~~~~~
100.00% signal signal [.] bar
|
---bar signal.c:11
|
|--50.49%--main signal.c:29
| __libc_start_main
| _start
|
--49.51%--0x33a8f
raise .:0
main signal.c:27
__libc_start_main
_start
~~~~~~~~~~~~~~~~
Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a filename was found in addr2line it was duplicated via strdup()
but never freed. Now we pass NULL and handle this gracefully in
addr2line.
Detected by Valgrind:
==16331== 1,680 bytes in 21 blocks are definitely lost in loss record 148 of 220
==16331== at 0x4C2AF1F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==16331== by 0x672FA69: strdup (in /usr/lib/libc-2.25.so)
==16331== by 0x52769F: addr2line (srcline.c:256)
==16331== by 0x52769F: addr2inlines (srcline.c:294)
==16331== by 0x52769F: dso__parse_addr_inlines (srcline.c:502)
==16331== by 0x574D7A: inline__fprintf (hist.c:41)
==16331== by 0x574D7A: ipchain__fprintf_graph (hist.c:147)
==16331== by 0x57518A: __callchain__fprintf_graph (hist.c:212)
==16331== by 0x5753CF: callchain__fprintf_graph.constprop.6 (hist.c:337)
==16331== by 0x57738E: hist_entry__fprintf (hist.c:628)
==16331== by 0x57738E: hists__fprintf (hist.c:882)
==16331== by 0x44A20F: perf_evlist__tty_browse_hists (builtin-report.c:399)
==16331== by 0x44A20F: report__browse_hists (builtin-report.c:491)
==16331== by 0x44A20F: __cmd_report (builtin-report.c:624)
==16331== by 0x44A20F: cmd_report (builtin-report.c:1054)
==16331== by 0x4A49CE: run_builtin (perf.c:296)
==16331== by 0x4A4CC0: handle_internal_command (perf.c:348)
==16331== by 0x434371: run_argv (perf.c:392)
==16331== by 0x434371: main (perf.c:530)
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-3-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
I just hit a segfault when doing `perf report -g srcline`.
Valgrind pointed me at this code as the culprit:
==8359== Invalid read of size 8
==8359== at 0x3096D9: map__rip_2objdump (map.c:430)
==8359== by 0x2FC1A3: match_chain_srcline (callchain.c:645)
==8359== by 0x2FC1A3: match_chain (callchain.c:700)
==8359== by 0x2FC1A3: append_chain (callchain.c:895)
==8359== by 0x2FC1A3: append_chain_children (callchain.c:846)
==8359== by 0x2FF719: callchain_append (callchain.c:944)
==8359== by 0x2FF719: hist_entry__append_callchain (callchain.c:1058)
==8359== by 0x32FA06: iter_add_single_cumulative_entry (hist.c:908)
==8359== by 0x33195C: hist_entry_iter__add (hist.c:1050)
==8359== by 0x258F65: process_sample_event (builtin-report.c:204)
==8359== by 0x30D60C: perf_session__deliver_event (session.c:1310)
==8359== by 0x30D60C: ordered_events__deliver_event (session.c:119)
==8359== by 0x310D12: __ordered_events__flush (ordered-events.c:210)
==8359== by 0x310D12: ordered_events__flush.part.3 (ordered-events.c:277)
==8359== by 0x30DD3C: perf_session__process_user_event (session.c:1349)
==8359== by 0x30DD3C: perf_session__process_event (session.c:1475)
==8359== by 0x30FC3C: __perf_session__process_events (session.c:1867)
==8359== by 0x30FC3C: perf_session__process_events (session.c:1921)
==8359== by 0x25A985: __cmd_report (builtin-report.c:575)
==8359== by 0x25A985: cmd_report (builtin-report.c:1054)
==8359== by 0x2B9A80: run_builtin (perf.c:296)
==8359== Address 0x70 is not stack'd, malloc'd or (recently) free'd
This patch fixes the issue.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
[ Remove dependency from another change ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-2-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prior to the pstore interface refactoring, the "id" generated during
a backend pstore_write() was only retained by the internal pstore
inode tracking list. Additionally the "part" was ignored, so EFI
would encode this in the id. This corrects the misunderstandings
and correctly sets "id" during pstore_write(), and uses "part"
directly during pstore_erase().
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Fixes: 76cc9580e3fb ("pstore: Replace arguments for write() API")
Fixes: a61072aae693 ("pstore: Replace arguments for erase() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
|
|
Since the head is guaranteed by the check above to be null, the call_rcu
would explode. Remove the previously logically dead code that was made
logically very much alive and kicking.
Fixes: 985538eee06f ("net/sched: remove redundant null check on head")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As reported by Michal, vsock_stream_sendmsg() could still
sleep at vsock_stream_has_space() after prepare_to_wait():
vsock_stream_has_space
vmci_transport_stream_has_space
vmci_qpair_produce_free_space
qp_lock
qp_acquire_queue_mutex
mutex_lock
Just switch to the new wait API like we did for commit
d9dc8b0f8b4e ("net: fix sleeping for sk_wait_event()").
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit dc9c4d0fe023, the arp_target array moved from a static global
to a local variable. By the nature of static globals, the array used to
be initialized to all 0. At present, it's full of random data, which
that gets interpreted as arp_target values, when none have actually been
specified. Systems end up booting with spew along these lines:
[ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.204892] lacp0: Setting MII monitoring interval to 100
[ 32.211071] lacp0: Removing ARP target 216.124.228.17
[ 32.216824] lacp0: Removing ARP target 218.160.255.255
[ 32.222646] lacp0: Removing ARP target 185.170.136.184
[ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.243987] lacp0: Removing ARP target 56.125.228.17
[ 32.249625] lacp0: Removing ARP target 218.160.255.255
[ 32.255432] lacp0: Removing ARP target 15.157.233.184
[ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.276632] lacp0: Removing ARP target 16.0.0.0
[ 32.281755] lacp0: Removing ARP target 218.160.255.255
[ 32.287567] lacp0: Removing ARP target 72.125.228.17
[ 32.293165] lacp0: Removing ARP target 218.160.255.255
[ 32.298970] lacp0: Removing ARP target 8.125.228.17
[ 32.304458] lacp0: Removing ARP target 218.160.255.255
None of these were actually specified as ARP targets, and the driver does
seem to clean up the mess okay, but it's rather noisy and confusing, leaks
values to userspace, and the 255.255.255.255 spew shows up even when debug
prints are disabled.
The fix: just zero out arp_target at init time.
While we're in here, init arp_all_targets_value in the right place.
Fixes: dc9c4d0fe023 ("bonding: reduce scope of some global variables")
CC: Mahesh Bandewar <maheshb@google.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assignmnet:
ip_align = strict ? 2 : NET_IP_ALIGN;
in compare_pkt_ptr_alignment() trips up Coverity because we can only
get to this code when strict is true, therefore ip_align will always
be 2 regardless of NET_IP_ALIGN's value.
So just assign directly to '2' and explain the situation in the
comment above.
Reported-by: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As of 7bb11dc9f59d and 0622cab0341c, bond slaves in a 3ad bond are not
removed from the aggregator when they are down, and the active slave count
is NOT equal to number of ports in the aggregator, but rather the number
of ports in the aggregator that are still enabled. The sysfs spew for
bonding_show_ad_num_ports() has a comment that says "Show number of active
802.3ad ports.", but it's currently showing total number of ports, both
active and inactive. Remedy it by using the same logic introduced in
0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
netlink all report the number of active ports. Note that this means that
IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
NUM_PORTS, and thus perhaps should be renamed for clarity.
Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
link set dev <slave2> down, was able to produce the state where I could
see both in the same aggregator, but a number of ports count of 1.
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2 <---
Slave Interface: ens10
MII Status: up <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
MII Status: up
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 1 <---
Slave Interface: ens10
MII Status: down <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If dma mask checks fail in atl2_probe(), it breaks off initialization,
deallocates all resources, but returns zero.
The patch adds proper error code return value and
make error code setup unified.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey Konovalov and idaifish@gmail.com reported crashes caused by
one skb shared_info being overwritten from __ip6_append_data()
Andrey program lead to following state :
copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200
The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
fraggap, 0); is overwriting skb->head and skb_shared_info
Since we apparently detect this rare condition too late, move the
code earlier to even avoid allocating skb and risking crashes.
Once again, many thanks to Andrey and syzkaller team.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: <idaifish@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.
[ 17.504959] ------------[ cut here ]------------
[ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[ 17.506545] transfer buffer not dma capable
[ 17.507022] Modules linked in:
[ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 17.509039] Call Trace:
[ 17.509320] ? dump_stack+0x5c/0x78
[ 17.509714] ? __warn+0xbe/0xe0
[ 17.510073] ? warn_slowpath_fmt+0x5a/0x80
[ 17.510532] ? nommu_map_sg+0xb0/0xb0
[ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570
[ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0
[ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0
[ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0
[ 17.513125] ? usb_start_wait_urb+0x65/0x160
[ 17.513604] ? usb_control_msg+0xdc/0x130
[ 17.514061] ? usb_xfer+0xa4/0x2a0
[ 17.514445] ? __i2c_transfer+0x108/0x3c0
[ 17.514899] ? i2c_transfer+0x57/0xb0
[ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590
[ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20
[ 17.516408] ? i2c_smbus_xfer+0x125/0x330
[ 17.516876] ? i2c_smbus_xfer+0x125/0x330
[ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[ 17.517824] ? i2cdev_ioctl+0x75/0x1c0
[ 17.518248] ? do_vfs_ioctl+0x9f/0x600
[ 17.518671] ? vfs_write+0x144/0x190
[ 17.519078] ? SyS_ioctl+0x74/0x80
[ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad
[ 17.519959] ---[ end trace d047c04982f5ac50 ]---
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
|
|
The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit
b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").
Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.
The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.
There were two independent bugs in __get_user_asm_u64():
- it still did the STAC/CLAC user space access marking, even though
that is now done by the wrapper macros, see commit 11f1a4b9755f
("x86: reorganize SMAP handling in user space accesses").
This didn't result in a semantic error, it just means that the
inlined optimized version was hugely less efficient than the
allegedly slower standard version, since the CLAC/STAC overhead is
quite high on modern Intel CPU's.
- the double register %eax/%edx was marked as an output, but the %eax
part of it was touched early in the asm, and could thus clobber other
inputs to the asm that gcc didn't expect it to touch.
In particular, that meant that the generated code could look like
this:
mov (%eax),%eax
mov 0x4(%eax),%edx
where the load of %edx obviously was _supposed_ to be from the 32-bit
word that followed the source of %eax, but because %eax was
overwritten by the first instruction, the source of %edx was
basically random garbage.
The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org # v4.8+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Al noticed that unsafe_put_user() had type problems, and fixed them in
commit a7cc722fff0b ("fix unsafe_put_user()"), which made me look more
at those functions.
It turns out that unsafe_get_user() had a type issue too: it limited the
largest size of the type it could handle to "unsigned long". Which is
fine with the current users, but doesn't match our existing normal
get_user() semantics, which can also handle "u64" even when that does
not fit in a long.
While at it, also clean up the type cast in unsafe_put_user(). We
actually want to just make it an assignment to the expected type of the
pointer, because we actually do want warnings from types that don't
convert silently. And it makes the code more readable by not having
that one very long and complex line.
[ This patch might become stable material if we ever end up back-porting
any new users of the unsafe uaccess code, but as things stand now this
doesn't matter for any current existing uses. ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 76b91c32dd86 ("bridge: stp: when using userspace stp stop
kernel hello and hold timers"), bridge would not start hello_timer if
stp_enabled is not KERNEL_STP when br_dev_open.
The problem is even if users set stp_enabled with KERNEL_STP later,
the timer will still not be started. It causes that KERNEL_STP can
not really work. Users have to re-ifup the bridge to avoid this.
This patch is to fix it by starting br->hello_timer when enabling
KERNEL_STP in br_stp_start.
As an improvement, it's also to start hello_timer again only when
br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is
no reason to start the timer again when it's NO_STP.
Fixes: 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers")
Reported-by: Haidong Li <haili@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When TX checksum offload is used, if the computed checksum is 0 the
LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4
UDP checksum, it indicates to receiver that no checksum is calculated.
Under ipv6, UDP checksum yields a result of zero must be changed to
0xffff. Hence disabling checksum offload for ipv6 packets.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Reported-by: popcorn mix <popcornmix@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when arp_accept is 1, we always override existing neigh
entries with incoming gratuitous ARP replies. Otherwise, we override
them only if new replies satisfy _locktime_ conditional (packets arrive
not earlier than _locktime_ seconds since the last update to the neigh
entry).
The idea behind locktime is to pick the very first (=> close) reply
received in a unicast burst when ARP proxies are used. This helps to
avoid ARP thrashing where Linux would switch back and forth from one
proxy to another.
This logic has nothing to do with gratuitous ARP replies that are
generally not aligned in time when multiple IP address carriers send
them into network.
This patch enforces overriding of existing neigh entries by all incoming
gratuitous ARP packets, irrespective of their time of arrival. This will
make the kernel honour all incoming gratuitous ARP packets.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The addr_type retrieval can be costly, so it's worth trying to avoid its
calculation as much as possible. This patch makes it calculated only
for gratuitous ARP packets. This is especially important since later we
may want to move is_garp calculation outside of arp_accept block, at
which point the costly operation will be executed for all setups.
The patch is the result of a discussion in net-dev:
http://marc.info/?l=linux-netdev&m=149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code is quite involving already to earn a separate function for
itself. If anything, it helps arp_process readability.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the is_garp code deals just with gratuitous ARP packets, not every
unsolicited packet.
This patch is a result of a discussion in netdev:
http://marc.info/?l=linux-netdev&m=149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
failing sys_wait4() won't fill struct rusage...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__put_user_size() relies upon its first argument having the same type as what
the second one points to; the only other user makes sure of that and
unsafe_put_user() should do the same.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On rdma read errors, release the sq ref that was taken
when the req was initialized. This avoids a hang in
nvmet_sq_destroy() when the queue is being freed.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
Rather than waiting for reset work thread to stop queues and abort the ios,
immediately stop the queues on error detection. Reset thread will restop
the queues (as it's called on other paths), but it does not appear to have
a side effect.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In order to create an association, the remoteport must be
serving either a target role or a discovery role.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
FC Port roles is a bit mask, not individual values.
Correct nvme definitions to unique bits.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
CMB doesn't get unmapped until removal while getting remapped on every
reset. Add the unmapping and sysfs file removal to the reset path in
nvme_pci_disable to match the mapping path in nvme_pci_enable.
Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-By: Stephen Bates <sbates@raithlin.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
get_msr() of MSR_EFER is currently always going to succeed, but static
checker doesn't see that far.
Don't complicate stuff and just use 0 for the fallback -- it means that
the feature is not present.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Static analysis noticed that pmu->nr_arch_gp_counters can be 32
(INTEL_PMC_MAX_GENERIC) and therefore cannot be used to shift 'int'.
I didn't add BUILD_BUG_ON for it as we have a better checker.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Static checker noticed that base3 could be used uninitialized if the
segment was not present (useable). Random stack values probably would
not pass VMCS entry checks.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1aa366163b8b ("KVM: x86 emulator: consolidate segment accessors")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Huawei folks reported a read out-of-bounds vulnerability in kvm pio emulation.
- "inb" instruction to access PIT Mod/Command register (ioport 0x43, write only,
a read should be ignored) in guest can get a random number.
- "rep insb" instruction to access PIT register port 0x43 can control memcpy()
in emulator_pio_in_emulated() to copy max 0x400 bytes but only read 1 bytes,
which will disclose the unimportant kernel memory in host but no crash.
The similar test program below can reproduce the read out-of-bounds vulnerability:
void hexdump(void *mem, unsigned int len)
{
unsigned int i, j;
for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++)
{
/* print offset */
if(i % HEXDUMP_COLS == 0)
{
printf("0x%06x: ", i);
}
/* print hex data */
if(i < len)
{
printf("%02x ", 0xFF & ((char*)mem)[i]);
}
else /* end of block, just aligning for ASCII dump */
{
printf(" ");
}
/* print ASCII dump */
if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1))
{
for(j = i - (HEXDUMP_COLS - 1); j <= i; j++)
{
if(j >= len) /* end of block, not really printing */
{
putchar(' ');
}
else if(isprint(((char*)mem)[j])) /* printable char */
{
putchar(0xFF & ((char*)mem)[j]);
}
else /* other char */
{
putchar('.');
}
}
putchar('\n');
}
}
}
int main(void)
{
int i;
if (iopl(3))
{
err(1, "set iopl unsuccessfully\n");
return -1;
}
static char buf[0x40];
/* test ioport 0x40,0x41,0x42,0x43,0x44,0x45 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x40, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x41, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x42, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x43, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x44, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("mov $0x45, %rdx;");
asm volatile ("in %dx,%al;");
asm volatile ("stosb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
/* ins port 0x40 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x40, %rdx;");
asm volatile ("rep insb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
/* ins port 0x43 */
memset(buf, 0xab, sizeof(buf));
asm volatile("push %rdi;");
asm volatile("mov %0, %%rdi;"::"q"(buf));
asm volatile ("mov $0x20, %rcx;");
asm volatile ("mov $0x43, %rdx;");
asm volatile ("rep insb;");
asm volatile ("pop %rdi;");
hexdump(buf, 0x40);
printf("\n");
return 0;
}
The vcpu->arch.pio_data buffer is used by both in/out instrutions emulation
w/o clear after using which results in some random datas are left over in
the buffer. Guest reads port 0x43 will be ignored since it is write only,
however, the function kernel_pio() can't distigush this ignore from successfully
reads data from device's ioport. There is no new data fill the buffer from
port 0x43, however, emulator_pio_in_emulated() will copy the stale data in
the buffer to the guest unconditionally. This patch fixes it by clearing the
buffer before in instruction emulation to avoid to grant guest the stale data
in the buffer.
In addition, string I/O is not supported for in kernel device. So there is no
iteration to read ioport %RCX times for string I/O. The function kernel_pio()
just reads one round, and then copy the io size * %RCX to the guest unconditionally,
actually it copies the one round ioport data w/ other random datas which are left
over in the vcpu->arch.pio_data buffer to the guest. This patch fixes it by
introducing the string I/O support for in kernel device in order to grant the right
ioport datas to the guest.
Before the patch:
0x000000: fe 38 93 93 ff ff ab ab .8......
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: f6 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 4d 51 30 30 ....MQ00
0x000018: 30 30 20 33 20 20 20 20 00 3
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
After the patch:
0x000000: 1e 02 f8 00 ff ff ab ab ........
0x000008: ab ab ab ab ab ab ab ab ........
0x000010: ab ab ab ab ab ab ab ab ........
0x000018: ab ab ab ab ab ab ab ab ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: d2 e2 d2 df d2 db d2 d7 ........
0x000008: d2 d3 d2 cf d2 cb d2 c7 ........
0x000010: d2 c4 d2 c0 d2 bc d2 b8 ........
0x000018: d2 b4 d2 b0 d2 ac d2 a8 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
0x000000: 00 00 00 00 00 00 00 00 ........
0x000008: 00 00 00 00 00 00 00 00 ........
0x000010: 00 00 00 00 00 00 00 00 ........
0x000018: 00 00 00 00 00 00 00 00 ........
0x000020: ab ab ab ab ab ab ab ab ........
0x000028: ab ab ab ab ab ab ab ab ........
0x000030: ab ab ab ab ab ab ab ab ........
0x000038: ab ab ab ab ab ab ab ab ........
Reported-by: Moguofang <moguofang@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Moguofang <moguofang@huawei.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/2809
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 2 PID: 2809 Comm: qemu-system-x86 Not tainted 4.11.0+ #13
Call Trace:
dump_stack+0x99/0xce
check_preemption_disabled+0xf5/0x100
__this_cpu_preempt_check+0x13/0x20
get_kvmclock_ns+0x6f/0x110 [kvm]
get_time_ref_counter+0x5d/0x80 [kvm]
kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
? kvm_hv_process_stimers+0x2a1/0x8a0 [kvm]
? kvm_arch_vcpu_ioctl_run+0xac9/0x1ce0 [kvm]
kvm_arch_vcpu_ioctl_run+0x5bf/0x1ce0 [kvm]
kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
? __fget+0xf3/0x210
do_vfs_ioctl+0xa4/0x700
? __fget+0x114/0x210
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc2
RIP: 0033:0x7f9d164ed357
? __this_cpu_preempt_check+0x13/0x20
This can be reproduced by run kvm-unit-tests/hyperv_stimer.flat w/
CONFIG_PREEMPT and CONFIG_DEBUG_PREEMPT enabled.
Safe access to per-CPU data requires a couple of constraints, though: the
thread working with the data cannot be preempted and it cannot be migrated
while it manipulates per-CPU variables. If the thread is preempted, the
thread that replaces it could try to work with the same variables; migration
to another CPU could also cause confusion. However there is no preemption
disable when reads host per-CPU tsc rate to calculate the current kvmclock
timestamp.
This patch fixes it by utilizing get_cpu/put_cpu pair to guarantee both
__this_cpu_read() and rdtsc() are not preempted.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
sscanf is a very poor way to parse integer. For example, I input
"discard" for act_mask, it gets 0xd and completely messes up. Using
correct API to do integer parse.
This patch also makes attributes accept any base of integer.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Commit bd698d24b1b57 ("i2c: designware: Get selected speed mode
sda-hold-time via ACPI") updated the logic that reads the timing
parameters for various I2C bus rates from the DSDT, to only read
the timing parameters for the currently selected mode.
This causes a WARN_ON() splat on platforms that legally omit the clock
frequency from the ACPI description, because in the new situation, the
core I2C designware driver still accesses the fields in the driver
struct that we no longer populate, and proceeds to calculate them from
the clock frequency. Since the clock frequency is unspecified, the
driver complains loudly using a WARN_ON().
So revert back to the old situation, where the struct fields for all
timings are populated, but retain the new logic which chooses the SDA
hold time from the timing mode that is currently in use.
Fixes: bd698d24b1b57 ("i2c: designware: Get selected speed mode ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
Namhyung Kim
Andi Kleen
Kim Phillips
Jiri Olsa
Ravi Bangoria
Ingo Molnar
Milian Wolff
Jan Kiszka
Kees Cook
Jiri Pirko
WANG Cong
Jarod Wilson
David S. Miller
Alexey Khoroshilov
Eric Dumazet
Sebastian Reichel
Linus Torvalds
Xin Long
Nisar Sayed
Ihar Hrachyshka
Wei Wang
Al Viro
Vijay Immanuel
James Smart
Jon Derrick
Radim Krčmář
Wanpeng Li
Shaohua Li
Ard Biesheuvel