aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-21target: fix potential race window in target_sess_cmd_list_waiting()Hannes Reinecke1-4/+8
target_sess_cmd_list_waiting() might hit on a condition where the kref for the command is already 0, but the destructor has not been called yet (or is stuck in waiting for a spin lock). Rather than leaving the command on the list we should explicitly remove it to avoid race issues later on. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"Nicholas Bellinger1-15/+1
This reverts commit c1ccbfe0311e2380a6d2dcb0714b36904f5d586f. Reverting this patch, as it incorrectly assumes the additional length for INQUIRY in target_complete_cmd_with_length() is SCSI allocation length, which breaks existing user-space code when SCSI allocation length is smaller than additional length. root@scsi-mq:~# sg_inq --len=4 -vvvv /dev/sdb found bsg_major=253 open /dev/sdb with flags=0x800 inquiry cdb: 12 00 00 00 04 00 duration=0 ms inquiry: pass-through requested 4 bytes (data-in) but got -28 bytes inquiry: pass-through can't get negative bytes, say it got none inquiry: got too few bytes (0) INQUIRY resid (32) should never exceed requested len=4 inquiry: failed requesting 4 byte response: Malformed response to SCSI command [resid=32] AFAICT the original change was not to address a specific host issue, so go ahead and revert to original logic for now. Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sumit Rai <sumitrai96@gmail.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status codeDinesh Israni1-4/+12
This patch addresses a bug where a local EXTENDED_COPY WRITE or READ backend I/O request would always return SAM_STAT_CHECK_CONDITION, even if underlying xcopy_pt_cmd->se_cmd generated a different SCSI status code. ESX host environments expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Tested on v4.1.y with ESX v5.5u2+ with local IBLOCK backend copy. Reported-by: Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by: Nixon Vincent <nixon.vincent@calsoftinc.com> Cc: Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by: Dinesh Israni <ddi@datera.io> Signed-off-by: Dinesh Israni <ddi@datera.io> Cc: Dinesh Israni <ddi@datera.io> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLENicholas Bellinger3-6/+24
This patch addresses a bug where EXTENDED_COPY across multiple LUNs results in a CHECK_CONDITION when the source + destination are not located on the same physical node. ESX Host environments expect sense COPY_ABORTED w/ COPY TARGET DEVICE NOT REACHABLE to be returned when this occurs, in order to signal fallback to local copy method. As described in section 6.3.3 of spc4r22: "If it is not possible to complete processing of a segment because the copy manager is unable to establish communications with a copy target device, because the copy target device does not respond to INQUIRY, or because the data returned in response to INQUIRY indicates an unsupported logical unit, then the EXTENDED COPY command shall be terminated with CHECK CONDITION status, with the sense key set to COPY ABORTED, and the additional sense code set to COPY TARGET DEVICE NOT REACHABLE." Tested on v4.1.y with ESX v5.5u2+ with BlockCopy across multiple nodes. Reported-by: Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by: Nixon Vincent <nixon.vincent@calsoftinc.com> Cc: Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by: Dinesh Israni <ddi@datera.io> Signed-off-by: Dinesh Israni <ddi@datera.io> Cc: Dinesh Israni <ddi@datera.io> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target: Re-add missing SCF_ACK_KREF assignment in v4.1.yNicholas Bellinger1-1/+3
This patch fixes a regression in >= v4.1.y code where the original SCF_ACK_KREF assignment in target_get_sess_cmd() was dropped upstream in commit 054922bb, but the series for addressing TMR ABORT_TASK + LUN_RESET with fabric session reinstatement in commit febe562c20 still depends on this code in transport_cmd_finish_abort(). The regression manifests itself as a se_cmd->cmd_kref +1 leak, where ABORT_TASK + LUN_RESET can hang indefinately for a specific I_T session for drivers using SCF_ACK_KREF, resulting in hung kthreads. This patch has been verified with v4.1.y code. Reported-by: Vaibhav Tandon <vst@datera.io> Tested-by: Vaibhav Tandon <vst@datera.io> Cc: Vaibhav Tandon <vst@datera.io> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19iscsi-target: fix iscsi cmd leakVarun Prakash1-0/+4
If iscsi-target receives NOP OUT with ITT and TTT set to 0xffffffff it allocates iscsi_cmd but does not free the cmd, so free iscsi_cmd in this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited"Colin Ian King2-3/+3
Trivial fix to spelling mistakes in pr_debug message and comments Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target/user: Fix comments to not refer to data ringAndy Grover1-7/+5
We no longer use a ringbuffer for the data area, so this might cause confusion. Just call it the data area. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target/user: Return an error if cmd data size is too largeAndy Grover1-3/+6
Userspace should be implementing VPD B0 (Block Limits) to inform the initiator of max data size, but just in case we do get a too-large request, do what the spec says and return INVALID_CDB_FIELD. Make sure to unlock udev->cmdr_lock before returning. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-19target/user: Use sense_reason_t in tcmu_queue_cmd_ringAndy Grover1-19/+10
Instead of using -ERROR-style returns, use sense_reason_t. This lets us remove tcmu_pass_op(), and return more correct sense values. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-10-15Linux 4.9-rc1Linus Torvalds1-2/+2
2016-10-14score: traps: Add missing include file to fix build errorGuenter Roeck1-0/+1
score images fail to build as follows. arch/score/kernel/traps.c: In function 'show_stack': arch/score/kernel/traps.c:55:3: error: implicit declaration of function '__get_user' __get_user() is declared in asm/uaccess.h, which was previously included through asm/module.h. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 88dd4a748da7 ("score: separate extable.h, switch module.h to it") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14fs/super.c: don't fool lockdep in freeze_super() and thaw_super() pathsOleg Nesterov1-12/+25
sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the false-positives. Now that xfs was fixed by Dave's commit dbad7c993053 ("xfs: stop holding ILOCK over filldir callbacks") we can remove it and change freeze_super() and thaw_super() to run with s_writers.rw_sem locks held; we add two trivial helpers for that, lockdep_sb_freeze_release() and lockdep_sb_freeze_acquire(). xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any warning from lockdep. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14fs/super.c: fix race between freeze_super() and thaw_super()Oleg Nesterov1-3/+3
Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering. In this case thaw_super() will wrongly call s_op->unfreeze_fs() before it was actually frozen, and call sb_freeze_unlock() which leads to the unbalanced percpu_up_write(). Unfortunately lockdep can't detect this, so this triggers misc BUG_ON()'s in kernel/rcu/sync.c. Reported-and-tested-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14overlayfs: Fix setting IOP_XATTR flagVivek Goyal1-5/+6
ovl_fill_super calls ovl_new_inode to create a root inode for the new superblock before initializing sb->s_xattr. This wrongly causes IOP_XATTR to be cleared in i_opflags of the new inode, causing SELinux to log the following message: SELinux: (dev overlay, type overlay) has no xattr support Fix this by initializing sb->s_xattr and similar fields before calling ovl_new_inode. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()Vegard Nossum2-0/+51
Both import_iovec() and rw_copy_check_uvector() take an array (typically small and on-stack) which is used to hold an iovec array copy from userspace. This is to avoid an expensive memory allocation in the fast path (i.e. few iovec elements). The caller may have to check whether these functions actually used the provided buffer or allocated a new one -- but this differs between the too. Let's just add a kernel doc to clarify what the semantics are for each function. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14CIFS: Retrieve uid and gid from special sid if enabledSteve French1-0/+123
New mount option "idsfromsid" indicates to cifs.ko that it should try to retrieve the uid and gid owner fields from special sids. This patch adds the code to parse the owner sids in the ACL to see if they match, and if so populate the uid and/or gid from them. This is faster than upcalling for them and asking winbind, and is a fairly common case, and is also helpful when cifs.upcall and idmapping is not configured. Signed-off-by: Steve French <steve.french@primarydata.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-14CIFS: Add new mount option to set owner uid and gid from special sids in aclSteve French4-1/+11
Add "idsfromsid" mount option to indicate to cifs.ko that it should try to retrieve the uid and gid owner fields from special sids in the ACL if present. This first patch just adds the parsing for the mount option. Signed-off-by: Steve French <steve.french@primarydata.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-14qedr: Add events support and register IB deviceRam Amrani3-2/+158
Add error handling support. Register ib device with ib stack. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add GSI supportRam Amrani7-1/+706
Add support for GSI over light L2. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add LL2 RoCE interfaceRam Amrani2-2/+34
Add light L2 interface for RoCE. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for data pathRam Amrani5-1/+1614
Implement fastpath verbs like ib_send_post, ib_post_recv and ib_poll_cq. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for memory registeration verbsRam Amrani4-1/+425
Add support for user, dma and memory regions registration. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for QP verbsRam Amrani7-1/+1320
Add support for Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for PD,PKEY and CQ verbsRam Amrani6-1/+777
Add support for protection domain and completion queue verbs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for user context verbsRam Amrani6-1/+622
Add support for ucontext, query port, add and del gid verbs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for RoCE HW initRam Amrani4-2/+691
Allocate and setup RoCE resources, interrupts and completion queues. Adds device attributes. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add RoCE driver frameworkRam Amrani8-11/+331
Adds a skeletal implementation of the qed* RoCE driver - basically the ability to communicate with the qede driver and receive notifications from it regarding various init/exit events. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14pkeys: Remove easily triggered WARNDave Jones1-1/+0
This easy-to-trigger warning shows up instantly when running Trinity on a kernel with CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS disabled. At most this should have been a printk, but the -EINVAL alone should be more than adequate indicator that something isn't available. Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-14MIPS: Wire up new pkey_{mprotect,alloc,free} syscallsRalf Baechle5-6/+28
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14380/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-14ovl: use vfs_get_link()Miklos Szeredi2-49/+7
Resulting in a complete removal of a function basically implementing the inverse of vfs_readlink(). As a bonus, now the proper security hook is also called. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-14vfs: add vfs_get_link() helperMiklos Szeredi2-0/+26
This helper is for filesystems that want to read the symlink and are better off with the get_link() interface (returning a char *) rather than the readlink() interface (copy into a userspace buffer). Also call the LSM hook for readlink (not get_link) since this is for symlink reading not following. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-14ovl: use generic_readlinkMiklos Szeredi1-20/+1
All filesystems that are backers for overlayfs would also use generic_readlink(). Move this logic to the overlay itself, which is a nice cleanup. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-14ovl: explain error values when removing acl from workdirMiklos Szeredi1-0/+13
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-13CIFS: Reset read oplock to NONE if we have mandatory locks after reopenPavel Shilovsky1-0/+9
We are already doing the same thing for an ordinary open case: we can't keep read oplock on a file if we have mandatory byte-range locks because pagereading can conflict with these locks on a server. Fix it by setting oplock level to NONE. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2016-10-13CIFS: Fix persistent handles re-opening on reconnectPavel Shilovsky2-5/+18
openFileList of tcon can be changed while cifs_reopen_file() is called that can lead to an unexpected behavior when we return to the loop. Fix this by introducing a temp list for keeping all file handles that need to be reopen. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2016-10-13SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setupSachin Prabhu1-199/+162
We split the rawntlmssp authentication into negotiate and authencate parts. We also clean up the code and add helpers. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-13SMB2: Separate Kerberos authentication from SMB2_sess_setupSachin Prabhu1-46/+230
Add helper functions and split Kerberos authentication off SMB2_sess_setup. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2016-10-13Expose cifs module parameters in sysfsGermano Percossi1-3/+3
/sys/module/cifs/parameters should display the three other module load time configuration settings for cifs.ko Signed-off-by: Germano Percossi <germano.percossi@citrix.com> Signed-off-by: Steve French <steve.french@primarydata.com>
2016-10-13Cleanup missing frees on some ioctlsSteve French1-5/+4
Cleanup some missing mem frees on some cifs ioctls, and clarify others to make more obvious that no data is returned. CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com>
2016-10-13Enable previous version supportSteve French4-2/+72
Add ioctl to query previous versions of file Allows listing snapshots on files on SMB3 mounts. Signed-off-by: Steve French <smfrench@gmail.com>
2016-10-13Do not send SMB3 SET_INFO request if nothing is changingSteve French1-0/+6
[CIFS] We had cases where we sent a SMB2/SMB3 setinfo request with all timestamp (and DOS attribute) fields marked as 0 (ie do not change) e.g. on chmod or chown. Signed-off-by: Steve French <steve.french@primarydata.com> CC: Stable <stable@vger.kernel.org>
2016-10-13cpufreq: CPPC: Correct desired_perf calculationHoan Tran1-1/+7
The desired_perf is an abstract performance number. Its value should be in the range of [lowest perf, highest perf] of CPPC. The correct calculation is desired_perf = freq * cppc_highest_perf / cppc_dmi_max_khz And cppc_cpufreq_set_target() returns if desired_perf is exactly the same with the old perf. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-13net: bridge: add the multicast_flood flag attribute to brport_attrsNikolay Aleksandrov1-0/+1
When I added the multicast flood control flag, I also added an attribute for it for sysfs similar to other flags, but I forgot to add it to brport_attrs. Fixes: b6cb5ac8331b ("net: bridge: add per-port multicast flood flag") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: axienet: Remove unused parameter from __axienet_device_resetTobias Klauser1-6/+5
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13liquidio: CN23XX: fix a loop timeoutDan Carpenter1-1/+1
This is supposed to loop 1000 times and then give up. The problem is it's a post-op and after the loop we test if "loop" is zero when really it would be -1. Fix this by making it a pre-op. Fixes: 1b7c55c4538b ("liquidio: CN23XX queue manipulation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: rtnl: info leak in rtnl_fill_vfinfo()Dan Carpenter1-0/+2
The "vf_vlan_info" struct ends with a 2 byte struct hole so we have to memset it to ensure that no stack information is revealed to user space. Fixes: 79aab093a0b5 ('net: Update API for VF vlan protocol 802.1ad support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13tipc: info leak in __tipc_nl_add_udp_addr()Dan Carpenter1-0/+2
We should clear out the padding and unused struct members so that we don't expose stack information to userspace. Fixes: fdb3accc2c15 ('tipc: add the ability to get UDP options via netlink') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: ipv4: Do not drop to make_route if oif is l3mdevDavid Ahern2-1/+26
Commit e0d56fdd7342 was a bit aggressive removing l3mdev calls in the IPv4 stack. If the fib_lookup fails we do not want to drop to make_route if the oif is an l3mdev device. Also reverts 19664c6a0009 ("net: l3mdev: Remove netif_index_is_l3_master") which removed netif_index_is_l3_master. Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: phy: Trigger state machine on state change and not polling.Andrew Lunn1-2/+20
The phy_start() is used to indicate the PHY is now ready to do its work. The state is changed, normally to PHY_UP which means that both the MAC and the PHY are ready. If the phy driver is using polling, when the next poll happens, the state machine notices the PHY is now in PHY_UP, and kicks off auto-negotiation, if needed. If however, the PHY is using interrupts, there is no polling. The phy is stuck in PHY_UP until the next interrupt comes along. And there is no reason for the PHY to interrupt. Have phy_start() schedule the state machine to run, which both speeds up the polling use case, and makes the interrupt use case actually work. This problems exists whenever there is a state change which will not cause an interrupt. Trigger the state machine in these cases, e.g. phy_error(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.