aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-04-09sh_eth: re-enable-E-MAC interrupts in sh_eth_set_ringparam()Sergei Shtylyov1-5/+1
The E-MAC interrupts are left disabled when the ring parameters are changed via 'ethtool'. In order to fix this, it's enough to call sh_eth_dev_init() with 'true' instead of 'false' for the second argument (which conveniently allows us to remove the following code re-enabling E-DMAC interrupts and reception). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08bridge, netem: mark mailing lists as moderatedstephen hemminger1-2/+2
I moderate these (lightly loaded) lists to block spam. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08tuntap: restore default qdiscJason Wang1-2/+2
After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08orangefs: remove unused variableMartin Brandenburg1-3/+1
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08orangefs: Add KERN_<LEVEL> to gossip_<level> macrosJoe Perches1-14/+17
Emit the logging messages at the appropriate levels. Miscellanea: o Change format to fmt o Use the more common ##__VA_ARGS__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08orangefs: strncpy -> strscpyMartin Brandenburg1-1/+5
It would have been possible for a rogue client-core to send in a symlink target which is not NUL terminated. This returns EIO if the client-core gives us corrupt data. Leave debugfs and superblock code as is for now. Other dcache.c and namei.c strncpy instances are safe because ORANGEFS_NAME_MAX = NAME_MAX + 1; there is always enough space for a name plus a NUL byte. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08orangefs: clean up truncate ctime and mtime settingMartin Brandenburg1-15/+1
The ctime and mtime are always updated on a successful ftruncate and only updated on a successful truncate where the size changed. We handle the ``if the size changed'' bit. This matches FUSE's behavior. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: fix ifnullfree.cocci warningskbuild test robot1-2/+1
fs/orangefs/orangefs-debugfs.c:130:2-26: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: optimize boilerplate code.Mike Marshall2-2/+2
Suggested by David Binderman <dcb314@hotmail.com> The former can potentially be a performance win over the latter. memcpy(d, s, len); memset(d+len, c, size-len); memset(d, c, size); memcpy(d, s, len); Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: xattr.c cleanupMike Marshall1-16/+1
1. It is nonsense to test for negative size_t, suggested by David Binderman <dcb314@hotmail.com> 2. By the time Orangefs gets called, the vfs has ensured that name != NULL, and that buffer and size are sane. Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08mpls: find_outdev: check for err ptr in addition to NULL checkRoopa Prabhu1-0/+3
find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to find the output device. In case of an error, inet{,6}_fib_lookup_dev() returns error pointer and dev_get_by_index() returns NULL. But the function only checks for NULL and thus can end up calling dev_put on an ERR_PTR. This patch adds an additional check for err ptr after the NULL check. Before: Trying to add an mpls route with no oif from user, no available path to 10.1.1.8 and no default route: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 [ 822.337195] BUG: unable to handle kernel NULL pointer dereference at 00000000000003a3 [ 822.340033] IP: [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] PGD 1db38067 PUD 1de9e067 PMD 0 [ 822.340033] Oops: 0000 [#1] SMP [ 822.340033] Modules linked in: [ 822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54 [ 822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti: ffff88001dad4000 [ 822.340033] RIP: 0010:[<ffffffff8148781e>] [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP: 0018:ffff88001dad7a88 EFLAGS: 00010282 [ 822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX: 0000000000000002 [ 822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI: 0000000000000000 [ 822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09: 0000000000000000 [ 822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12: ffffffff8187e0c0 [ 822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15: 0000000000000004 [ 822.340033] FS: 00007ff9ed798700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 822.340033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4: 00000000000006f0 [ 822.340033] Stack: [ 822.340033] 0000000000000000 0000000100000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000000 0801010a00000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000004 ffffffff8148749b ffffffff8187e0c0 000000000000001c [ 822.340033] Call Trace: [ 822.340033] [<ffffffff8148749b>] ? mpls_rt_alloc+0x2b/0x3e [ 822.340033] [<ffffffff81488e66>] ? mpls_rtm_newroute+0x358/0x3e2 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff813b7d94>] ? rtnetlink_rcv_msg+0x17e/0x191 [ 822.340033] [<ffffffff8111794e>] ? __kmalloc_track_caller+0x8c/0x9e [ 822.340033] [<ffffffff813c9393>] ? rht_key_hashfn.isra.20.constprop.57+0x14/0x1f [ 822.340033] [<ffffffff813b7c16>] ? __rtnl_unlock+0xc/0xc [ 822.340033] [<ffffffff813cb794>] ? netlink_rcv_skb+0x36/0x82 [ 822.340033] [<ffffffff813b4507>] ? rtnetlink_rcv+0x1f/0x28 [ 822.340033] [<ffffffff813cb2b1>] ? netlink_unicast+0x106/0x189 [ 822.340033] [<ffffffff813cb5b3>] ? netlink_sendmsg+0x27f/0x2c8 [ 822.340033] [<ffffffff81392ede>] ? sock_sendmsg_nosec+0x10/0x1b [ 822.340033] [<ffffffff81393df1>] ? ___sys_sendmsg+0x182/0x1e3 [ 822.340033] [<ffffffff810e4f35>] ? __alloc_pages_nodemask+0x11c/0x1e4 [ 822.340033] [<ffffffff8110619c>] ? PageAnon+0x5/0xd [ 822.340033] [<ffffffff811062fe>] ? __page_set_anon_rmap+0x45/0x52 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff810e85ab>] ? __lru_cache_add+0x1a/0x3a [ 822.340033] [<ffffffff81087ea9>] ? current_kernel_time64+0x9/0x30 [ 822.340033] [<ffffffff813940c4>] ? __sys_sendmsg+0x3c/0x5a [ 822.340033] [<ffffffff8148f597>] ? entry_SYSCALL_64_fastpath+0x12/0x6a [ 822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db 74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07 [ 822.340033] RIP [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP <ffff88001dad7a88> [ 822.340033] CR2: 00000000000003a3 [ 822.435363] ---[ end trace 98cc65e6f6b8bf11 ]--- After patch: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 RTNETLINK answers: Network is unreachable Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reported-by: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07ipv6: Count in extension headers in skb->network_headerJakub Sitnicki1-4/+4
When sending a UDPv6 message longer than MTU, account for the length of fragmentable IPv6 extension headers in skb->network_header offset. Same as we do in alloc_new_skb path in __ip6_append_data(). This ensures that later on __ip6_make_skb() will make space in headroom for fragmentable extension headers: /* move skb->data to ip header from ext header */ if (skb->data < skb_network_header(skb)) __skb_pull(skb, skb_network_offset(skb)); Prevents a splat due to skb_under_panic: skbuff: skb_under_panic: text:ffffffff8143397b len:2126 put:14 \ head:ffff880005bacf50 data:ffff880005bacf4a tail:0x48 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] KASAN CPU: 0 PID: 160 Comm: reproducer Not tainted 4.6.0-rc2 #65 [...] Call Trace: [<ffffffff813eb7b9>] skb_push+0x79/0x80 [<ffffffff8143397b>] eth_header+0x2b/0x100 [<ffffffff8141e0d0>] neigh_resolve_output+0x210/0x310 [<ffffffff814eab77>] ip6_finish_output2+0x4a7/0x7c0 [<ffffffff814efe3a>] ip6_output+0x16a/0x280 [<ffffffff815440c1>] ip6_local_out+0xb1/0xf0 [<ffffffff814f1115>] ip6_send_skb+0x45/0xd0 [<ffffffff81518836>] udp_v6_send_skb+0x246/0x5d0 [<ffffffff8151985e>] udpv6_sendmsg+0xa6e/0x1090 [...] Reported-by: Ji Jianwen <jiji@redhat.com> Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07Revert "ib_srpt: Convert to percpu_ida tag allocation"Bart Van Assche2-17/+40
This reverts commit 0fd10721fe3664f7549e74af9d28a509c9a68719. That patch causes the ib_srpt driver to crash as soon as the first SCSI command is received: kernel BUG at drivers/infiniband/ulp/srpt/ib_srpt.c:1439! invalid opcode: 0000 [#1] SMP Workqueue: target_completion target_complete_ok_work [target_core_mod] RIP: srpt_queue_response+0x437/0x4a0 [ib_srpt] Call Trace: srpt_queue_data_in+0x9/0x10 [ib_srpt] target_complete_ok_work+0x152/0x2b0 [target_core_mod] process_one_work+0x197/0x480 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x22/0x40 Aside from the crash, the shortcomings of that patch are as follows: - It makes the ib_srpt driver use I/O contexts allocated by transport_alloc_session_tags() but it does not initialize these I/O contexts properly. All the initializations performed by srpt_alloc_ioctx() are skipped. - It swaps the order of the send ioctx allocation and the transition to RTR mode which is wrong. - The amount of memory that is needed for I/O contexts is doubled. - srpt_rdma_ch.free_list is no longer used but is not removed. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-07RDS: fix congestion map corruption for PAGE_SIZE > 4kshamir rabinovitch1-1/+1
When PAGE_SIZE > 4k single page can contain 2 RDS fragments. If 'rds_ib_cong_recv' ignore the RDS fragment offset in to the page it then read the data fragment as far congestion map update and lead to corruption of the RDS connection far congestion map. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07RDS: memory allocated must be align to 8shamir rabinovitch1-2/+2
Fix issue in 'rds_ib_cong_recv' when accessing unaligned memory allocated by 'rds_page_remainder_alloc' using uint64_t pointer. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOUAlexander Duyck5-4/+29
This patch fixes an issue I found in which we were dropping frames if we had enabled checksums on GRE headers that were encapsulated by either FOU or GUE. Without this patch I was barely able to get 1 Gb/s of throughput. With this patch applied I am now at least getting around 6 Gb/s. The issue is due to the fact that with FOU or GUE applied we do not provide a transport offset pointing to the GRE header, nor do we offload it in software as the GRE header is completely skipped by GSO and treated like a VXLAN or GENEVE type header. As such we need to prevent the stack from generating it and also prevent GRE from generating it via any interface we create. Fixes: c3483384ee511 ("gro: Allow tunnel stacking in the case of FOU/GUE") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfsStrashko, Grygorii1-0/+2
Now wakeirq stops working for device if wakeup option for this device will be reconfigured through sysfs, like: echo disabled > /sys/devices/platform/extcon_usb1/power/wakeup echo enabled > /sys/devices/platform/extcon_usb1/power/wakeup Once above set of commands is executed the device's wakeup_source opject will be recreated and dev->power.wakeup->wakeirq field will contain NULL. As result, device_wakeup_arm_wake_irqs() will not arm wakeirq for the affected device. Hece, lets try to fix it in the following way: check for dev->wakeirq field when device_wakeup_attach() is called and if !NULL re-attach wakeirq to the device Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: work around RC6 counter wrapLen Brown1-4/+15
Sometimes the rc6 sysfs counter spontaneously resets, causing turbostat prints a very large number as it tries to calcuate % = 100 * (old - new) / interval When we see (old > new), print ***.**% instead of a bogus huge number. Note that this detection is not fool-proof, as the counter could reset several times and still result in new > old. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial KBL supportLen Brown1-0/+14
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial SKX supportLen Brown1-1/+8
SKX has a lot in common with HSX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: decode BXT TSC frequency via CPUIDLen Brown1-1/+4
Hard-code BXT ART to 19200MHz, so turbostat --debug can fully enumerate TSC: CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0 TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000) Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial BXT supportLen Brown1-0/+9
Broxton has a lot in common with SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: print IRTL MSRsLen Brown2-3/+64
Some processors use the Interrupt Response Time Limit (IRTL) MSR value to describe the maximum IRQ response time latency for deep package C-states. (Though others have the register, but do not use it) Lets print it out to give insight into the cases where it is used. IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: SGX state should print only if --debugLen Brown1-1/+1
The CPUID.SGX bit was printed, even if --debug was used Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add KBL supportLen Brown1-0/+2
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add SKX supportLen Brown1-0/+34
SKX is similar to BDX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Clean up all registered devices on exit.Richard Cochran1-1/+8
This driver registers cpuidle devices when a CPU comes online, but it leaves the registrations in place when a CPU goes offline. The module exit code only unregisters the currently online CPUs, leaving the devices for offline CPUs dangling. This patch changes the driver to clean up all registrations on exit, even those from CPUs that are offline. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Propagate hot plug errors.Richard Cochran1-2/+5
If a cpuidle registration error occurs during the hot plug notifier callback, we should really inform the hot plug machinery instead of just ignoring the error. This patch changes the callback to properly return on error. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Don't overreact to a cpuidle registration failure.Richard Cochran1-1/+1
The helper function, intel_idle_cpu_init, registers one new device with the cpuidle layer. If the registration should fail, that function immediately calls intel_idle_cpuidle_devices_uninit() to unregister every last CPU's device. However, it makes no sense to do so, when called from the hot plug notifier callback. This patch moves the call to intel_idle_cpuidle_devices_uninit() outside of the helper function to the one call site that actually needs to perform the de-registrations. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Setup the timer broadcast only on successful driver load.Richard Cochran1-7/+8
This driver sets the broadcast tick quite early on during probe and does not clean up again in cast of failure. This patch moves the setup call after the registration, placing the on_each_cpu() calls within the global CPU lock region. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Avoid a double free of the per-CPU data.Richard Cochran1-4/+3
The helper function, intel_idle_cpuidle_devices_uninit, frees the globally allocated per-CPU data. However, this function is invoked from the hot plug notifier callback at a time when freeing that data is not safe. If the call to cpuidle_register_driver() should fail (say, due to lack of memory), then the driver will free its per-CPU region. On the *next* CPU_ONLINE event, the driver will happily use the region again and even free it again if the failure repeats. This patch fixes the issue by moving the call to free_percpu() outside of the helper function at the two call sites that actually need to free the per-CPU data. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix dangling registration on error path.Richard Cochran1-4/+5
In the module_init() method, if the per-CPU allocation fails, then the active cpuidle registration is not cleaned up. This patch fixes the issue by attempting the allocation before registration, and then cleaning it up again on registration failure. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix deallocation order on the driver exit path.Richard Cochran1-3/+3
In the module_exit() method, this driver first frees its per-CPU pointer, then unregisters a callback making use of the pointer. Furthermore, the function, intel_idle_cpuidle_devices_uninit, is racy against CPU hot plugging as it calls for_each_online_cpu(). This patch corrects the issues by unregistering first on the exit path while holding the hot plug lock. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Remove redundant initialization calls.Richard Cochran1-6/+0
The function, intel_idle_cpuidle_driver_init, makes calls on each CPU to auto_demotion_disable() and c1e_promotion_disable(). These calls are redundant, as intel_idle_cpu_init() does the same calls just a bit later on. They are also premature, as the driver registration may yet fail. This patch removes the redundant code. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix a helper function's return value.Richard Cochran1-3/+1
The function, intel_idle_cpuidle_driver_init, delivers no error codes at all. This patch changes the function to return 'void' instead of returning zero. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: remove useless return from void function.Richard Cochran1-2/+0
Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07iommu/vt-d: Silence an uninitialized variable warningDan Carpenter1-1/+1
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu/rockchip: Fix "is stall active" checkJohn Keeping1-4/+4
Since commit cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu: Don't overwrite domain pointer when there is no default_domainJoerg Roedel1-1/+2
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: stable@vger.kernel.org # v4.4+ Fixes: 1228236de5f9 ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bitStefan Hajnoczi1-0/+2
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the device status bit in the uapi header file so that both the kernel and userspace applications can use it. The bit is currently unused by the virtio guest drivers and vhost. According to the spec "a good implementation will try to recover by issuing a reset". This is not attempted here because it requires auditing the virtio drivers to ensure there are no resource leaks or crashes if the device needs to be reset mid-operation. See "2.1 Device Status Field" in the VIRTIO 1.0 specification for details. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07MAINTAINERS: add entry for QEMUMichael S. Tsirkin1-0/+7
Gabriel merged support for QEMU FW CFG interface, but there's apparently no official maintainer. It's also possible that this will grow more interfaces in future. I'll happily co-maintain it and handle pull requests together with the rest of the PV stuff I maintain. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07firmware: qemu_fw_cfg.c: hold ACPI global lock during device accessGabriel Somlo1-0/+16
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07virtio: virtio 1.0 cs04 spec compliance for resetMichael S. Tsirkin1-3/+8
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2016-04-07qemu_fw_cfg: don't leak kobj on init errorMichael S. Tsirkin1-1/+7
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork1-0/+2
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch1-0/+1
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer2-0/+12
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-06Btrfs: fix file/data loss caused by fsync after rename and new inodeFilipe Manana1-0/+137
If we rename an inode A (be it a file or a directory), create a new inode B with the old name of inode A and under the same parent directory, fsync inode B and then power fail, at log tree replay time we end up removing inode A completely. If inode A is a directory then all its files are gone too. Example scenarios where this happens: This is reproducible with the following steps, taken from a couple of test cases written for fstests which are going to be submitted upstream soon: # Scenario 1 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir -p /mnt/a/x echo "hello" > /mnt/a/x/foo echo "world" > /mnt/a/x/bar sync mv /mnt/a/x /mnt/a/y mkdir /mnt/a/x xfs_io -c fsync /mnt/a/x <power failure happens> The next time the fs is mounted, log tree replay happens and the directory "y" does not exist nor do the files "foo" and "bar" exist anywhere (neither in "y" nor in "x", nor the root nor anywhere). # Scenario 2 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/a echo "hello" > /mnt/a/foo sync mv /mnt/a/foo /mnt/a/bar echo "world" > /mnt/a/foo xfs_io -c fsync /mnt/a/foo <power failure happens> The next time the fs is mounted, log tree replay happens and the file "bar" does not exists anymore. A file with the name "foo" exists and it matches the second file we created. Another related problem that does not involve file/data loss is when a new inode is created with the name of a deleted snapshot and we fsync it: mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/testdir btrfs subvolume snapshot /mnt /mnt/testdir/snap btrfs subvolume delete /mnt/testdir/snap rmdir /mnt/testdir mkdir /mnt/testdir xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir <power failure> The next time the fs is mounted the log replay procedure fails because it attempts to delete the snapshot entry (which has dir item key type of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry, resulting in the following error that causes mount to fail: [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [52174.512570] ------------[ cut here ]------------ [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]() [52174.514681] BTRFS: Transaction aborted (error -2) [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1 [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758 [52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd [52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88 [52174.524053] Call Trace: [52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90 [52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2 [52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50 [52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284 [52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs] [52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs] [52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs] [52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs] [52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs] [52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs] [52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs] [52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3 [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8 [52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59 [52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f [52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]--- Fix this by forcing a transaction commit when such cases happen. This means we check in the commit root of the subvolume tree if there was any other inode with the same reference when the inode we are fsync'ing is a new inode (created in the current transaction). Test cases for fstests, covering all the scenarios given above, were submitted upstream for fstests: * fstests: generic test for fsync after renaming directory https://patchwork.kernel.org/patch/8694281/ * fstests: generic test for fsync after renaming file https://patchwork.kernel.org/patch/8694301/ * fstests: add btrfs test for fsync after snapshot deletion https://patchwork.kernel.org/patch/8670671/ Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-04-07mailbox: pcc: Don't access an unmapped memory address spaceShanker Donthineni1-2/+2
The acpi_pcc_probe() may end up accessing memory outside of the PCCT table space causing the kernel panic(). Increment the pcct_entry pointer after parsing 'HW-reduced Communications Subspace' to fix the problem. This change also enables the parsing of subtable at index 0. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-06net: add the AF_KCM entries to family name tablesDexuan Cui1-3/+6
This is for the recent kcm driver, which introduces AF_KCM(41) in b7ac4eb(kcm: Kernel Connection Multiplexor module). Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.