aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-01bpf: Add support for changing congestion controlLawrence Brakmo7-17/+58
Added support for changing congestion control for SOCK_OPS bpf programs through the setsockopt bpf helper function. It also adds a new SOCK_OPS op, BPF_SOCK_OPS_NEEDS_ECN, that is needed for congestion controls, like dctcp, that need to enable ECN in the SYN packets. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample BPF program to set buffer sizesLawrence Brakmo2-0/+87
This patch contains a BPF program to set initial receive window to 40 packets and send and receive buffers to 1.5MB. This would usually be done after doing appropriate checks that indicate the hosts are far enough away (i.e. large RTT). Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Add TCP connection BPF callbacksLawrence Brakmo4-1/+15
Added callbacks to BPF SOCK_OPS type program before an active connection is intialized and after a passive or active connection is established. The following patch demostrates how they can be used to set send and receive buffer sizes. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Add setsockopt helper function to bpfLawrence Brakmo3-2/+94
Added support for calling a subset of socket setsockopts from BPF_PROG_TYPE_SOCK_OPS programs. The code was duplicated rather than making the changes to call the socket setsockopt function because the changes required would have been larger. The ops supported are: SO_RCVBUF SO_SNDBUF SO_MAX_PACING_RATE SO_PRIORITY SO_RCVLOWAT SO_MARK Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample bpf program to set initial windowLawrence Brakmo2-0/+70
The sample bpf program, tcp_rwnd_kern.c, sets the initial advertized window to 40 packets in an environment where distinct IPv6 prefixes indicate that both hosts are not in the same data center. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Support for setting initial receive windowLawrence Brakmo4-2/+28
This patch adds suppport for setting the initial advertized window from within a BPF_SOCK_OPS program. This can be used to support larger initial cwnd values in environments where it is known to be safe. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample bpf program to set SYN/SYN-ACK RTOsLawrence Brakmo2-0/+70
The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK RTOs to 10ms when both hosts are within the same datacenter (i.e. small RTTs) in an environment where common IPv6 prefixes indicate both hosts are in the same data center. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Support for per connection SYN/SYN-ACK RTOsLawrence Brakmo4-2/+17
This patch adds support for setting a per connection SYN and SYN_ACK RTOs from within a BPF_SOCK_OPS program. For example, to set small RTOs when it is known both hosts are within a datacenter. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: program to load and attach sock_ops BPF progsLawrence Brakmo2-0/+100
The program load_sock_ops can be used to load sock_ops bpf programs and to attach it to an existing (v2) cgroup. It can also be used to detach sock_ops programs. Examples: load_sock_ops [-l] <cg-path> <prog filename> Load and attaches a sock_ops program at the specified cgroup. If "-l" is used, the program will continue to run to output the BPF log buffer. If the specified filename does not end in ".o", it appends "_kern.o" to the name. load_sock_ops -r <cg-path> Detaches the currently attached sock_ops program from the specified cgroup. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: BPF support for sock_opsLawrence Brakmo9-3/+314
Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: Add peeloff-flags socket optionNeil Horman2-15/+78
Based on a request raised on the sctp devel list, there is a need to augment the sctp_peeloff operation while specifying the O_CLOEXEC and O_NONBLOCK flags (simmilar to the socket syscall). Since modifying the SCTP_SOCKOPT_PEELOFF socket option would break user space ABI for existing programs, this patch creates a new socket option SCTP_SOCKOPT_PEELOFF_FLAGS, which accepts a third flags parameter to allow atomic assignment of the socket descriptor flags. Tested successfully by myself and the requestor Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: Andreas Steinmetz <ast@domdv.de> CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sfc: correct comment on efx_mcdi_process_eventEdward Cree1-1/+1
Fix out-of-date comment. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sfc: change Unknown MCDI event message to print full event.Jon Cooper1-2/+3
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net/mlx5: fix spelling mistake: "Allodating" -> "Allocating"Colin Ian King1-1/+1
Trivial fix to spelling mistake in mlx5_core_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01arm: sunxi: Revert changes merged through net-next.Maxime Ripard14-175/+1
This reverts commits 2c0cba482e79 ("arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module") to 2428fd0fe550 ("arm64: defconfig: Enable dwmac-sun8i driver on defconfig") and 3432a86e641c ("arm: sun8i: orangepipc: use internal phy-mode") to 5a79b4f2a5e7 ("arm: sun8i: orangepi-2: use internal phy-mode") that should be merged through the arm-soc tree, and end up in merge conflicts and build failures. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01datapath: Avoid using stack larger than 1024.Tonghao Zhang1-23/+58
When compiling OvS-master on 4.4.0-81 kernel, there is a warning: CC [M] /root/ovs/datapath/linux/datapath.o /root/ovs/datapath/linux/datapath.c: In function 'ovs_flow_cmd_set': /root/ovs/datapath/linux/datapath.c:1221:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] This patch factors out match-init and action-copy to avoid "Wframe-larger-than=1024" warning. Because mask is only used to get actions, we new a function to save some stack space. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_init_chunk_tXin Long7-27/+27
This patch is to remove the typedef sctp_init_chunk_t, and replace with struct sctp_init_chunk in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_inithdr_tXin Long4-13/+13
This patch is to remove the typedef sctp_inithdr_t, and replace with struct sctp_inithdr in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_data_chunk_tXin Long6-10/+10
This patch is to remove the typedef sctp_data_chunk_t, and replace with struct sctp_data_chunk in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_datahdr_tXin Long2-8/+11
This patch is to remove the typedef sctp_datahdr_t, and replace with struct sctp_datahdr in the places where it's using this typedef. It is also to use izeof(variable) instead of sizeof(type). Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_param_action_tXin Long1-2/+2
Remove this typedef, there is even no places using it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_param_tXin Long3-11/+9
This patch is to remove the typedef sctp_param_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to remove the useless declaration sctp_addip_addr_config and fix the lack of params for some other functions' declaration. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_paramhdr_tXin Long10-71/+79
This patch is to remove the typedef sctp_paramhdr_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type). Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_cid_action_tXin Long1-2/+2
Remove this typedef, there is even no places using it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_cid_tXin Long7-14/+16
This patch is to remove the typedef sctp_cid_t, and replace with struct sctp_cid in the places where it's using this typedef. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_chunkhdr_tXin Long12-103/+102
This patch is to remove the typedef sctp_chunkhdr_t, and replace with struct sctp_chunkhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type)., especially in sctp_new. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove the typedef sctp_sctphdr_tXin Long7-25/+24
This patch is to remove the typedef sctp_sctphdr_t, and replace with struct sctphdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type). Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: add control message passing capabilities to flower offloadsPieter Jansen van Vuuren3-1/+70
Previously the flower offloads never sends messages to the hardware, and never registers a handler for receiving messages from hardware. This patch enables the flower offloads to send control messages to hardware when adding and removing flow rules. Additionally it registers a control message rx handler for receiving stats updates from hardware for each offloaded flow. Additionally this patch adds 4 control message types; Add, modify and delete flow, as well as flow stats. It also allows nfp_flower_cmsg_get_data() to be used outside of cmsg.c. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: add a stats handler for flower offloadsPieter Jansen van Vuuren5-8/+171
Previously there was no way of updating flow rule stats after they have been offloaded to hardware. This is solved by keeping track of stats received from hardware and providing this to the TC handler on request. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: add metadata to each flow offloadPieter Jansen van Vuuren5-13/+412
Adds metadata describing the mask id of each flow and keeps track of flows installed in hardware. Previously a flow could not be removed from hardware as there was no way of knowing if that a specific flow was installed. This is solved by storing the offloaded flows in a hash table. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: add basic action capabilities to flower offloadsPieter Jansen van Vuuren5-0/+271
Adds push vlan, pop vlan, output and drop action capabilities to flower offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: extend flower matching capabilitiesPieter Jansen van Vuuren6-1/+316
Extends matching capabilities for flower offloads to include vlan, layer 2, layer 3 and layer 4 type matches. This includes both exact and wildcard matching. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: extend flower add flow offloadPieter Jansen van Vuuren3-1/+325
Extends the flower flow add function by calculating which match fields are present in the flower offload structure and allocating the appropriate space to describe these. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: provide infrastructure for offloading flower based TC filtersPieter Jansen van Vuuren8-14/+220
Adds a flower based TC offload handler for representor devices, this is in addition to the bpf based offload handler. The changes in this patch will be used in a follow-up patch to add tc flower offload to the NFP. The flower app enables tc offloads on representors by default. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01nfp: add phys_switch_id supportSimon Horman4-0/+36
Add phys_switch_id support by allowing lookup of SWITCHDEV_ATTR_ID_PORT_PARENT_ID via the nfp_repr_port_attr_get switchdev operation. This is visible to user-space in the phys_switch_id attribute of a netdev. e.g. cd /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 find . -name phys_switch_id | xargs grep . ./net/eth3/phys_switch_id:00154d1300bd ./net/eth4/phys_switch_id:00154d1300bd ./net/eth2/phys_switch_id:00154d1300bd grep: ./net/eth5/phys_switch_id: Operation not supported In the above eth2 and eth3 and representor netdevs for the first and second physical port. eth4 is the representor for the PF. And eth5 is the PF netdev. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: switchdev: add SET_SWITCHDEV_OPS helperSimon Horman1-0/+4
Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured and do nothing otherwise. This allows for slightly cleaner code which uses switchdev but does not select NET_SWITCHDEV. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01sctp: remove an unnecessary check from sctp_endpoint_destroyXin Long1-8/+6
ep->base.sk gets it's value since sctp_endpoint_new, nowhere will change it. So there's no need to check if it's null, as it can never be null. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert packet_fanout.sk_ref from atomic_t to refcount_tReshetova, Elena2-5/+7
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert netlbl_lsm_cache.refcount from atomic_t to refcount_tReshetova, Elena3-8/+8
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert net.passive from atomic_t to refcount_tReshetova, Elena3-4/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert inet_frag_queue.refcnt from atomic_t to refcount_tReshetova, Elena3-10/+10
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert fib_rule.refcnt from atomic_t to refcount_tReshetova, Elena2-5/+6
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert unix_address.refcnt from atomic_t to refcount_tReshetova, Elena2-5/+6
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert netpoll_info.refcnt from atomic_t to refcount_tReshetova, Elena2-4/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert in_device.refcnt from atomic_t to refcount_tReshetova, Elena2-6/+7
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert ip_mc_list.refcnt from atomic_t to refcount_tReshetova, Elena2-6/+7
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_refcnt from atomic_t to refcount_tReshetova, Elena35-69/+70
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena37-85/+74
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sk_buff_fclones.fclone_ref from atomic_t to refcount_tReshetova, Elena2-7/+7
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sk_buff.users from atomic_t to refcount_tReshetova, Elena21-67/+67
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.