aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-18btrfs: delete unused member nobarriersAnand Jain2-4/+0
The last consumer of nobarriers is removed by the commit [1] and sync won't fail with EOPNOTSUPP anymore. Thus, now when write cache is write through it just return success without actually transpiring such a request to the block device/lun. [1] commit b25de9d6da49b1a8760a89672283128aa8c78345 block: remove BIO_EOPNOTSUPP And, as the device/lun write cache state may change dynamically saving such as state won't help either. So deleting the member nobarriers. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: scrub: Fix RAID56 recovery race conditionQu Wenruo1-0/+22
When scrubbing a RAID5 which has recoverable data corruption (only one data stripe is corrupted), sometimes scrub will report more csum errors than expected. Sometimes even unrecoverable error will be reported. The problem can be easily reproduced by the following steps: 1) Create a btrfs with RAID5 data profile with 3 devs 2) Mount it with nospace_cache or space_cache=v2 To avoid extra data space usage. 3) Create a 128K file and sync the fs, unmount it Now the 128K file lies at the beginning of the data chunk 4) Locate the physical bytenr of data chunk on dev3 Dev3 is the 1st data stripe. 5) Corrupt the first 64K of the data chunk stripe on dev3 6) Mount the fs and scrub it The correct csum error number should be 16 (assuming using x86_64). Larger csum error number can be reported in a 1/3 chance. And unrecoverable error can also be reported in a 1/10 chance. The root cause of the problem is RAID5/6 recover code has race condition, due to the fact that full scrub is initiated per device. While for other mirror based profiles, each mirror is independent with each other, so race won't cause any big problem. For example: Corrupted | Correct | Correct | | Scrub dev3 (D1) | Scrub dev2 (D2) | Scrub dev1(P) | ------------------------------------------------------------------------ Read out D1 |Read out D2 |Read full stripe | Check csum |Check csum |Check parity | Csum mismatch |Csum match, continue |Parity mismatch | handle_errored_block | |handle_errored_block | Read out full stripe | | Read out full stripe| D1 csum error(err++) | | D1 csum error(err++)| Recover D1 | | Recover D1 | So D1's csum error is accounted twice, just because handle_errored_block() doesn't have enough protection, and race can happen. On even worse case, for example D1's recovery code is re-writing D1/D2/P, and P's recovery code is just reading out full stripe, then we can cause unrecoverable error. This patch will use previously introduced lock_full_stripe() and unlock_full_stripe() to protect the whole scrub_handle_errored_block() function for RAID56 recovery. So no extra csum error nor unrecoverable error. Reported-by: Goffredo Baroncelli <kreijack@libero.it> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: scrub: Introduce full stripe lock for RAID56Qu Wenruo3-0/+251
Unlike mirror based profiles, RAID5/6 recovery needs to read out the whole full stripe. And if we don't do proper protection, it can easily cause race condition. Introduce 2 new functions: lock_full_stripe() and unlock_full_stripe() for RAID5/6. Which store a rb_tree of mutexes for full stripes, so scrub callers can use them to lock a full stripe to avoid race. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ minor comment adjustments ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: Use ktime_get_real_ts for root ctimeDeepa Dinamani1-1/+2
btrfs_root_item maintains the ctime for root updates. This is not part of vfs_inode. Since current_time() uses struct inode* as an argument as Linus suggested, this cannot be used to update root times unless, we modify the signature to use inode. Since btrfs uses nanosecond time granularity, it can also use ktime_get_real_ts directly to obtain timestamp for the root. It is necessary to use the timespec time api here because the same btrfs_set_stack_timespec_*() apis are used for vfs inode times as well. These can be transitioned to using timespec64 when btrfs internally changes to use timespec64 as well. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: handle only applicable errors returned by btrfs_get_extentDan Carpenter2-26/+15
btrfs_get_extent() never returns NULL pointers, so this code introduces a static checker warning. The btrfs_get_extent() is a bit complex, but trust me that it doesn't return NULLs and also if it did we would trigger the BUG_ON(!em) before the last return statement. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [ updated subject ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount optionQu Wenruo1-7/+18
[BUG] The easist way to reproduce the bug is: ------ # mkfs.btrfs -f $dev -n 16K # mount $dev $mnt -o inode_cache # btrfs quota enable $mnt # btrfs quota rescan -w $mnt # btrfs qgroup show $mnt qgroupid rfer excl -------- ---- ---- 0/5 32.00KiB 32.00KiB ^^ Twice the correct value ------ And fstests/btrfs qgroup test group can easily detect them with inode_cache mount option. Although some of them are false alerts since old test cases are using fixed golden output. While new test cases will use "btrfs check" to detect qgroup mismatch. [CAUSE] Inode_cache mount option will make commit_fs_roots() to call btrfs_save_ino_cache() to update fs/subvol trees, and generate new delayed refs. However we call btrfs_qgroup_prepare_account_extents() too early, before commit_fs_roots(). This makes the "old_roots" for newly generated extents are always NULL. For freeing extent case, this makes both new_roots and old_roots to be empty, while correct old_roots should not be empty. This causing qgroup numbers not decreased correctly. [FIX] Modify the timing of calling btrfs_qgroup_prepare_account_extents() to just before btrfs_qgroup_account_extents(), and add needed delayed_refs handler. So qgroup can handle inode_map mount options correctly. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: use q which is already obtained from bdev_get_queueAnand Jain1-4/+3
We have already assigned q from bdev_get_queue() so use it. And rearrange the code for better view. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: switch to div64_u64 if with a u64 divisorLiu Bo3-7/+7
This is fixing code pieces where we use div_u64 when passing a u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: update scrub_parity to use u64 stripe_lenLiu Bo1-4/+4
Commit 3d8da6781760 ("Btrfs: fix divide error upon chunk's stripe_len") changed stripe_len in struct map_lookup to u64, but didn't update stripe_len in struct scrub_parity. This updates the type and switches to div64_u64_rem to match u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: enable repair during read for raid56 profileLiu Bo1-13/+27
Now that scrub can fix data errors with the help of parity for raid56 profile, repair during read is able to as well. Although the mirror num in raid56 scenario has different meanings, i.e. 0 or 1: read data directly > 1: do recover with parity, it could be fit into how we repair bad block during read. The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the device and position on it. Cc: David Sterba <dsterba@suse.cz> Tested-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: use clear_page where appropriateDavid Sterba2-2/+2
There's a helper to clear whole page, with a arch-specific optimized code. The replaced cases do not seem to be in performace critical code, but we still might get some percent gain. Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: Prevent scrub recheck from racing with dev replaceQu Wenruo1-4/+9
scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses bbio without protection of bio_counter. This can lead to use-after-free if racing with dev replace cancel. Fix it by increasing bio_counter before calling btrfs_map_sblock() and decreasing the bio_counter when corresponding recover is finished. Cc: Liu Bo <bo.li.liu@oracle.com> Reported-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: Wait for in-flight bios before freeing target device for raid56Qu Wenruo3-0/+21
When raid56 dev-replace is cancelled by running scrub, we will free target device without waiting for in-flight bios, causing the following NULL pointer deference or general protection failure. BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0 IP: generic_make_request_checks+0x4d/0x610 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs] task: ffff88002875b4c0 task.stack: ffffc90001334000 RIP: 0010:generic_make_request_checks+0x4d/0x610 Call Trace: ? generic_make_request+0xc7/0x360 generic_make_request+0x24/0x360 ? generic_make_request+0xc7/0x360 submit_bio+0x64/0x120 ? page_in_rbio+0x4d/0x80 [btrfs] ? rbio_orig_end_io+0x80/0x80 [btrfs] finish_rmw+0x3f4/0x540 [btrfs] validate_rbio_for_rmw+0x36/0x40 [btrfs] raid_rmw_end_io+0x7a/0x90 [btrfs] bio_endio+0x56/0x60 end_workqueue_fn+0x3c/0x40 [btrfs] btrfs_scrubparity_helper+0xef/0x620 [btrfs] btrfs_endio_raid56_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8 In btrfs_dev_replace_finishing(), we will call btrfs_rm_dev_replace_blocked() to wait bios before destroying the target device when scrub is finished normally. However when dev-replace is aborted, either due to error or cancelled by scrub, we didn't wait for bios, this can lead to use-after-free if there are bios holding the target device. Furthermore, for raid56 scrub, at least 2 places are calling btrfs_map_sblock() without protection of bio_counter, leading to the problem. This patch fixes the problem: 1) Wait for bio_counter before freeing target device when canceling replace 2) When calling btrfs_map_sblock() for raid56, use bio_counter to protect the call. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: scrub: Don't append on-disk pages for raid56 scrubQu Wenruo1-4/+0
In the following situation, scrub will calculate wrong parity to overwrite the correct one: RAID5 full stripe: Before | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0x0000 (Bad) | 0xcdcd | 0x0000 | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K After scrubbing dev3 only: | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0xcdcd (Good) | 0xcdcd | 0xcdcd (Bad) | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K The reason is that after raid56 read rebuild rbio->stripe_pages are all correctly recovered (0xcd for data stripes). However when we check and repair parity in scrub_parity_check_and_repair(), we will append pages in sparity->spages list to rbio->bio_pages[], which contains old on-disk data. And when we submit parity data to disk, we calculate parity using rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback to rbio->stripe_pages[]. The patch fix it by not appending pages from sparity->spages. So finish_parity_scrub() will use rbio->stripe_pages[] which is correct. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: qgroup: Re-arrange tracepoint timing to co-operate with reserved space tracepointQu Wenruo2-10/+6
Newly introduced qgroup reserved space trace points are normally nested into several common qgroup operations. While some other trace points are not well placed to co-operate with them, causing confusing output. This patch re-arrange trace_btrfs_qgroup_release_data() and trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered before reserved space ones. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: qgroup: Add trace point for qgroup reserved spaceQu Wenruo3-44/+96
Introduce the following trace points: qgroup_update_reserve qgroup_meta_reserve These trace points are handy to trace qgroup reserve space related problems. Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup structure to trace points, so that structure needs to be exported. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: drop redundant parameters from btrfs_map_sblockDavid Sterba3-9/+6
All callers pass 0 for mirror_num and 1 for need_raid_map. Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: sink GFP flags parameter to tree_mod_log_insert_rootDavid Sterba1-5/+5
All (1) callers pass the same value. Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: sink GFP flags parameter to tree_mod_log_insert_moveDavid Sterba1-5/+5
All (1) callers pass the same value. Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: fix wrong failed mirror_num of read-repair on raid56Liu Bo1-0/+5
In raid56 scenario, after trying parity recovery, we didn't set mirror_num for btrfs_bio with failed mirror_num, hence end_bio_extent_readpage() will report a random mirror_num in dmesg log. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: set scrub page's io_error if failing to submit ioLiu Bo1-2/+6
Scrub repairs data by the unit called scrub_block, which may contain several pages. Scrub always tries to look up a good copy of a whole block, but if there's no such copy, it tries to do repair page by page. If we don't set page's io_error when checking this bad copy, in the last step, we may skip this page when repairing bad copy from good copy. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: track exclusive filesystem operation in flagsDavid Sterba4-26/+25
There are several operations, usually started from ioctls, that cannot run concurrently. The status is tracked in mutually_exclusive_operation_running as an atomic_t. We can easily track the status as one of the per-filesystem flag bits with same synchronization guarantees. The conversion replaces: * atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...) * atomic_set(..., 0) -> clear_bit(FLAG, ...) Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: qgroups: Retry after commit on getting EDQUOTGoldwyn Rodrigues1-1/+23
We are facing the same problem with EDQUOT which was experienced with ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but here is a quick fix, which may be too big a hammer. Quotas are reserved during the start of an operation, incrementing qg->reserved. However, it is written to disk in a commit_transaction which could take as long as commit_interval. In the meantime there could be deletions which are not accounted for because deletions are accounted for only while committed (free_refroot). So, when we get a EDQUOT flush the data to disk and try again. This fixes fstests btrfs/139. Here is a sample script which shows this issue. DEVICE=/dev/vdb MOUNTPOINT=/mnt TESTVOL=$MOUNTPOINT/tmp QUOTA=5 PROG=btrfs DD_BS="4k" DD_COUNT="256" RUN_TIMES=5000 mkfs.btrfs -f $DEVICE mount -o commit=240 $DEVICE $MOUNTPOINT $PROG subvolume create $TESTVOL $PROG quota enable $TESTVOL $PROG qgroup limit ${QUOTA}G $TESTVOL typeset -i DD_RUN_GOOD typeset -i QUOTA function _check_cmd() { if [[ ${?} > 0 ]]; then echo -n "$(date) E: Running previous command" echo ${*} echo "Without sync" $PROG qgroup show -pcreFf ${TESTVOL} echo "With sync" $PROG qgroup show -pcreFf --sync ${TESTVOL} exit 1 fi } while true; do DD_RUN_GOOD=$RUN_TIMES while (( ${DD_RUN_GOOD} != 0 )); do dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT} _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}" DD_RUN_GOOD=(${DD_RUN_GOOD}-1) done $PROG qgroup show -pcref $TESTVOL echo "----------- Cleanup ---------- " rm $TESTVOL/quotatest* done Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: replace hardcoded value with SEQ_LAST macroEdmund Nadolski3-10/+12
Define the SEQ_LAST macro to replace (u64)-1 in places where said value triggers a special-case ref search behavior. Signed-off-by: Edmund Nadolski <enadolski@suse.com> Reviewed-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: provide enumeration for __merge_refs mode argumentEdmund Nadolski1-10/+13
Replace hardcoded numeric values for __merge_refs 'mode' argument with descriptive constants. Signed-off-by: Edmund Nadolski <enadolski@suse.com> Reviewed-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove unused qgroup members from btrfs_trans_handleDavid Sterba6-20/+0
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe4562dec83b3), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove local blocksize variable in reada_find_extentDavid Sterba1-4/+2
The name is misleading and the local variable serves no purpose. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_start_machine_devDavid Sterba1-4/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_find_zoneDavid Sterba1-3/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from btree_readahead_hookDavid Sterba3-6/+5
We can read fs_info from eb. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for global readahead treeDavid Sterba2-1/+8
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for readaheadDavid Sterba2-1/+8
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: consistent usage of types in balance_argsHans van Kranenburg1-5/+5
The btrfs_balance_args are only used for the balance ioctl, so use __u instead of __le here for consistency. The __le usage was introduced in bc3094673f22d and dee32d0ac3719 and was probably a result of copy/pasting when the code was written. The usage of __le did not break anything, but it's unnecessary. Also, this change makes the code less confusing for the careful reader. Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: No need to check !(flags & MS_RDONLY) twiceGoldwyn Rodrigues1-2/+1
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: update comments in cache_save_setupLiu Bo1-1/+2
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: convert BUG_ON to WARN_ONLiu Bo1-2/+2
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: helper for ops that requires full stripeLiu Bo1-8/+10
This adds a helper to show directly whether ops require full stripe. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: do not add extra mirror when dev_replace target dev is not availableLiu Bo1-3/+4
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: handle operations for device replace separatelyLiu Bo1-81/+98
Since this part is mostly independent, this moves it to a separate function. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: introduce a function to get extra mirror from replaceLiu Bo1-72/+89
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: separate DISCARD from __btrfs_map_blockLiu Bo1-114/+175
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: create a helper for getting chunk mapLiu Bo3-111/+57
We have similar code here and there, this merges them into a helper. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: add file item tracepointsLiu Bo2-0/+154
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ formatting adjustments ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_raid_bio.refs from atomic_t to refcount_tElena Reshetova1-10/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_ctx.refs from atomic_t to refcount_tElena Reshetova1-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_parity.refs from atomic_t to refcount_tElena Reshetova1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_block.refs from atomic_t to refcount_tElena Reshetova1-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_recover.refs from atomic_t to refcount_tElena Reshetova1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert compressed_bio.pending_bios from atomic_t to refcount_tElena Reshetova1-9/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert extent_state.refs from atomic_t to refcount_tElena Reshetova2-8/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.