aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-11clk: hisilicon: add CRG driver for Hi3798CV200 SoCJiancheng Xue6-4/+454
Add CRG driver for Hi3798CV200 SoC. CRG(Clock and Reset Generator) module generates clock and reset signals used by other module blocks on SoC. Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10clk: qcom: Add support for RPM ClocksGeorgi Djakov5-0/+528
This adds initial support for clocks controlled by the Resource Power Manager (RPM) processor on some Qualcomm SoCs, which use the qcom_rpm driver to communicate with RPM. Such platforms are apq8064 and msm8960. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10clk: qcom: Add support for SMD-RPM ClocksGeorgi Djakov5-0/+668
This adds initial support for clocks controlled by the Resource Power Manager (RPM) processor on some Qualcomm SoCs, which use the qcom_smd_rpm driver to communicate with RPM. Such platforms are msm8916, apq8084 and msm8974. The RPM is a dedicated hardware engine for managing the shared SoC resources in order to keep the lowest power profile. It communicates with other hardware subsystems via shared memory and accepts clock requests, aggregates the requests and turns the clocks on/off or scales them on demand. This driver is based on the codeaurora.org driver: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> [sboyd@codeaurora.org: Remove useless braces for single line if] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10clk: qcom: Always add factor clock for xo clocksGeorgi Djakov1-9/+6
Currently the RPM/RPM-SMD clock drivers do not register the xo clocks, so we should always add factor clock. When we later add xo clocks support into the drivers, we should update this function to skip registration. By doing so we avoid any DT dependencies. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10clk: qcom: Add support for msm8994 global clock controllerBastian Köcher3-0/+2309
The clock definition was ported from the Google 3.10 kernel tree to work with the latest kernel. Signed-off-by: Bastian Köcher <mail@kchr.de> [jeremymc@redhat.com: created new commit of just dt-bindings] Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> [sboyd@codeaurora.org: Tidy up commit text and Kconfig help] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10dt-bindings: qcom: clocks: Add msm8994 clock bindingsJeremy McNicoll2-0/+138
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> [sboyd@codeaurora.org: Dropped unused and incorrect GDSC defines] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10clk: tegra: dfll: Use builtin_platform_driver to simplify the codeWei Yongjun1-6/+1
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-09clk: qcom: ipq806x: Fix board clk ratesStephen Boyd1-2/+2
The clocks on these boards run at 25 MHz, not 19.2 and 27 like other platforms. Unfortunately I copy/pasted from other similar SoCs but forgot this one is different. Fix it. Fixes: a085f877a882 ("clk: qcom: Move cxo/pxo/xo into dt files") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-09clk: pxa: Use __iomem properly and staticize lock variableStephen Boyd2-5/+6
This function is passed an __iomem pointer but we use a u32 pointer instead which makes checkers like spare complain. Furthermore, "lock" is a pretty poor variable name for a string that will go into lockdep reports and the symbol isn't marked static. Cleanup all this. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-09clk: gate: fix coding styleUwe Kleine-König1-2/+2
The : of the ?: operator should have a leading space. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [sboyd@codeaurora.org: Also remove useless parenthesis] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-09clk: pxa: fix pxa2xx_determine_rate returnArnd Bergmann1-11/+12
The new pxa2xx_determine_rate() function seems lacking in a few regards: - For an exact match or no match at all, the rate is uninitialized as reported by gcc -Wmaybe-unintialized: drivers/clk/pxa/clk-pxa.c: In function 'pxa2xx_determine_rate': drivers/clk/pxa/clk-pxa.c:243:5: error: 'rate' may be used uninitialized in this function - If we get a non-exact match, the req->rate output is never set to the actual rate but remains at the requested rate. - We should not attempt to print a rate if none could be found This rewrites the logic accordingly. Fixes: 9fe694295098 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08reset: mediatek: Add MT2701 reset driverShunli Wang2-4/+16
In infrasys and perifsys, there are many reset control bits for kinds of modules. These bits are used as actual reset controllers to be registered into kernel's generic reset controller framework. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08clk: mediatek: Add MT2701 clock supportShunli Wang14-5/+1797
Add MT2701 clock support, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08clk: pxa mark dummy helper as 'inline'Arnd Bergmann1-1/+1
The dummy_clk_set_parent function is marked as 'static' but is no longer referenced from the pxa25x clk driver after the last use of the RATE_RO_OPS() macro is gone from this file, causing a harmless build warning: In file included from drivers/clk/pxa/clk-pxa25x.c:24:0: drivers/clk/pxa/clk-pxa.h:146:12: error: 'dummy_clk_set_parent' defined but not used [-Werror=unused-function] This marks the functon as 'inline', which lets the compiler simply drop it when it gets referenced. Fixes: 9fe694295098 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: ti: make clk-dra7-atl explicitly non-modularPaul Gortmaker1-17/+3
The Kconfig currently controlling compilation of this code is: arch/arm/mach-omap2/Kconfig:config SOC_DRA7XX arch/arm/mach-omap2/Kconfig: bool "TI DRA7XX" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tags etc. since all that information is already contained at the top of the file in the comments. Cc: Tero Kristo <t-kristo@ti.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: tegra: make clk-tegra124-dfll-fcpu explicitly non-modularPaul Gortmaker1-14/+2
The Kconfig currently controlling compilation of this code is: arch/arm/mach-tegra/Kconfig:config ARCH_TEGRA_124_SOC arch/arm/mach-tegra/Kconfig: bool "Enable support for Tegra124 family" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tags etc. since all that information is already contained at the top of the file in the comments. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Aleksandr Frid <afrid@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: linux-clk@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: mvebu: make ap806-system-controller explicitly non-modularPaul Gortmaker1-20/+3
The Kconfig currently controlling compilation of this code is: drivers/clk/mvebu/Kconfig:config ARMADA_AP806_SYSCON drivers/clk/mvebu/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: mvebu: make cp110-system-controller explicitly non-modularPaul Gortmaker1-32/+3
The Kconfig currently controlling compilation of this code is: drivers/clk/mvebu/Kconfig:config ARMADA_CP110_SYSCON drivers/clk/mvebu/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: pxa: transfer CPU clock setting from pxa2xx-cpufreqRobert Jarzmik4-27/+414
This is the initial stage to transfer the pxa25x and pxa27x CPU clocks handling from cpufreq to the clock API. More precisely, the clocks transferred are : - cpll : core pll, known also as the CPU core turbo frequency - core : core, known also as the CPU actual frequency, being either the CPU core turbo frequency or the CPU core run frequency This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so that it can become, at least in devicetree builds, the casual cpufreq-dt driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02clk: qcom: Add freq tables for a few rcgsRajendra Nayak1-0/+25
Add frequency tables for a few RCG clocks in msm8996 Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02clk: qcom: Add .is_enabled ops for clk-alpha-pllRajendra Nayak1-0/+26
This would be useful in subsequent patches when the .set_rate operation would need to identify if the PLL is actually enabled Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [sboyd@codeaurora.org: Simplify return statement of is_enabled op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Enable FSM mode for votable alpha PLLsRajendra Nayak5-28/+38
The votable alpha PLLs need to have the fsm mode enabled as part of the initialization. The sequence seems to be the same as used by clk-pll, so move the function which does this into a common place and reuse it for the clk-alpha-pll Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: handle alpha PLLs with 16bit alpha val registersRajendra Nayak2-7/+18
Some alpha PLLs have support for only a 16bit programable Alpha Value (as against the default 40bits). Add a flag to handle the 16bit alpha registers Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Add support to initialize alpha pllsRajendra Nayak2-0/+51
Add a function to do initial configuration of the alpha plls Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Add support for alpha pll hwfsm opsRajendra Nayak2-12/+93
Some PLLs can support an HW FSM mode (different from the Votable FSMs, though its the same bit used to enable Votable FSMs as well as HW FSMs) which enables the HW to do the bypass/reset/enable-output-ctrl sequence on its own. So all thats needed from SW is to set the FSM_ENA bit. PLL_ACTIVE_FLAG is whats used to check if the PLL is active/enabled. Some of the PLLs which support HW FSM can also need an OFFLINE request that needs to be toggled across the enable/disable. We use a flag to identify such cases and handle them. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: ipq4019: changed i2c freq tableAbhishek Sahu1-2/+1
The current I2C freq table uses MND values which is not applicable for I2C since its RCG does not have MND counter. This patch updates the freq table for 19.05 MHz clk frequency with FEPLL_200 parent. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: pxa: export core clocksRobert Jarzmik2-8/+14
pxaxxx_get_clk_frequency_khz() needs several clocks to be available through clk_get(), ie. the cpu clocks, system bus clock and memory clocks. Add the missing clkdev so that their rate can be acquired. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: pxa: b bit of clkcfg means fast busRobert Jarzmik1-2/+2
The meaning of this bit was inverted : - when set to 0, system bus clock is half of the CPU run clock - when set to 1, system bus clock is the CPU run clock Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: pxa: core pll is not affected by t bitRobert Jarzmik2-4/+2
The t bit of clkfcfg doesn't affect the core pll clock, but it makes core clock select between core pll clock and core run clock. As such remove it from the core pll rate reporting function, while it remains in clk_pxa27x_core_get_parent(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: pxa: remove unused variablesRobert Jarzmik1-5/+2
This is a cleanup patch to remove unused values not used in their respective functions. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qoriq: add ls1046a supportMingkai Hu1-0/+41
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: lcc-ipq806x: Fixup overriding val in regmap_read callAxel Lin1-1/+1
Drop the assignment of regmap_read return code to val, so the code checks the value read. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mmp: pxa910: fix return value check in pxa910_clk_init()Wei Yongjun1-2/+2
Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mmp: pxa168: fix return value check in pxa168_clk_init()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mmp: mmp2: fix return value check in mmp2_clk_init()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: tegra: dfll: improve function-level documentationJulia Lawall1-5/+5
Adjust variables to correspond to the names used in the parameter list of the function. Move the struct device * variable up to the place where it appears in the parameter list. Issue detected using Coccinelle (http://coccinelle.lip6.fr/) Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: keystone: improve function-level documentationJulia Lawall1-2/+2
Adjust the documentation to use the actual function names. Issue detected using Coccinelle (http://coccinelle.lip6.fr/) Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mvebu: migrate CP110 system controller to clk_hw API and registrationMarcin Wojtas1-78/+72
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in Armada CP110 system controller driver. This commit introduces new API and registration for all clocks in CP110 HW blocks. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: Enable compile testing for s2mps11 and max77686Krzysztof Kozlowski1-2/+2
s2mps11 and max77686 clock drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: renesas: cpg-mssr: Fix inverted debug checkGeert Uytterhoeven1-2/+2
The intention was to enable the checks if debugging is enabled, not disabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: nxp: clk-lpc18xx-ccu: Unmap region obtained by of_iomapArvind Yadav1-1/+4
Free memory mapping, if lpc18xx_ccu_init() is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: lpc32xx: add a quirk for PWM and MS clock dividersVladimir Zapolskiy1-4/+28
In common clock framework CLK_DIVIDER_ONE_BASED or'ed with CLK_DIVIDER_ALLOW_ZERO flags indicates that 1) a divider clock may be set to zero value, 2) divider's zero value is interpreted as a non-divided clock. On the LPC32xx platform clock dividers of PWM and memory card clocks comply with the first condition, but zero value means a gated clock, thus it may happen that the divider value is not updated when the clock is enabled and the clock remains gated. The change adds one-shot quirks, which check for zero value of divider on initialization and set it to a non-zero value, therefore in runtime a gate clock will work as expected. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qoriq: Don't allow CPU clocks higher than starting valueScott Wood1-5/+8
The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood <oss@buserror.net> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: mmcc-8996: Add gpu gdscsRajendra Nayak1-0/+24
Add gpu gdsc data for msm8996 Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Handle the clamp_io assert/deassert sequenceRajendra Nayak2-1/+27
Add a flag to mark gdscs which need to support the clamp deassert/assert before and after the gdsc enable/disable Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: imx: improve precision of AV PLL to 1 HzEmil Lundmark1-0/+8
The audio and video PLLs are designed to have a precision of 1 Hz if some conditions are met. The current implementation only allows a precision that depends on the rate of the parent clock. E.g., if the parent clock is 24 MHz, the precision will be 24 Hz; or more generally the precision will be p / 10^6 Hz where p is the parent clock rate. This comes down to how the register values for the PLL's fractional loop divider are chosen. The clock rate calculation for the PLL is PLL output frequency = Fref * (DIV_SELECT + NUM / DENOM) or with a shorter notation r = p * (d + a / b) In addition to all variables being integers, we also have the following conditions: 27 <= d <= 54 -2^29 <= a <= 2^29-1 0 < b <= 2^30-1 |a| < b Here, d, a and b are register values for the fractional loop divider. We want to chose d, a and b such that f(p, r) = p, i.e. f is our round_rate function. Currently, d and b are chosen as d = r / p b = 10^6 hence we get the poor precision. And a is defined in terms of r, d, p and b: a = (r - d * p) * b / p I propose that if p <= 2^30-1 (i.e., the max value for b), we chose b as b = p We can do this since |a| < b |(r - d * p) * b / p| < b |r - d * p| < p Which have two solutions, one of them is when p < 0, so we can skip that one. The other is when p > 0 and p * (d - 1) < r < p * (d + 1) Substitute d = r / p: (r - p) < r < (r + p) <=> p > 0 So, as long as p > 0, we can chose b = p. This is a good choise for b since a = (r - d * p) * b / p = (r - d * p) * p / p = r - d * p r = p * (d + a / b) = p * d + p * a / b = p * d + p * a / p = p * d + a and if d = r / p: a = r - d * p = r - r / p * p = 0 r = p * d + a = p * d + 0 = p * r / p = r I reckon this is the intention by the design of the clock rate formula. Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: imx: fix integer overflow in AV PLL round rateEmil Lundmark1-2/+6
Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-28clk: xgene: Don't call __pa on ioremaped addressLaura Abbott1-6/+4
ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Loc Ho <lho@apm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-27clk: stm32f469: Add QSPI clockGabriel Fernandez2-19/+158
This patch adds the QSPI clock for stm32f469 discovery board. The gate mapping is a little bit different from stm32f429 soc. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-27clk: stm32f4: Add RTC clockGabriel Fernandez1-1/+136
This patch introduces the support of the RTC clock. RTC clock can have 3 sources: lsi, lse and hse_rtc. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.