aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-03ibmvnic: Record SKB RX queue during pollThomas Falcon1-0/+1
Map each RX SKB to the RX queue associated with the driver's RX SCRQ. This should improve the RX CPU load balancing issues seen by the performance team. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Continue skb processing after skb completion errorNathan Fontenot1-1/+1
There is not a need to stop processing skbs if we encounter a skb that has a receive completion error. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Check for driver reset first in ibmvnic_xmitNathan Fontenot1-6/+6
Move the check for the driver resetting to the first thing in ibmvnic_xmit(). Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Wait for any pending scrqs entries at driver closeNathan Fontenot1-20/+27
When closing the ibmvnic driver we need to wait for any pending sub crq entries to ensure they are handled. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Clean up tx pools when closingNathan Fontenot1-0/+30
When closing the ibmvnic driver, most notably during the reset path, the tx pools need to be cleaned to ensure there are no hanging skbs that need to be free'ed. The need for this was found during debugging a loss of network traffic after handling a driver reset. The underlying cause was some skbs in the tx pool that were never free'ed. As a result the upper network layers never tried a re-send since it believed the driver still had the skb. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Whitespace correction in release_rx_poolsNathan Fontenot1-1/+1
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Delete napi's when releasing driver resourcesNathan Fontenot1-0/+9
The napi structs allocated at drivier initializatio need to be free'ed when releasing the drivers resources. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Updated reset handlingNathan Fontenot2-157/+275
The ibmvnic driver has multiple handlers for resetting the driver depending on the reason the reset is needed (failover, lpm, fatal erors,...). All of the reset handlers do essentially the same thing, this patch moves this work to a common reset handler. By doing this we also allow the driver to better handle situations where we can get a reset while handling a reset. The updated reset handling works by adding a reset work item to the list of resets and then scheduling work to perform the reset. This step is necessary because we can receive a reset in interrupt context and we want to handle the reset out of interrupt context. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Replace is_closed with state fieldNathan Fontenot2-9/+23
Replace the is_closed flag in the ibmvnic adapter strcut with a more comprehensive state field that tracks the current state of the driver. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03ibmvnic: Move resource initialization to its own routineNathan Fontenot1-32/+39
Move all of the calls to initialize resources for the driver to a separate routine. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03netfilter: conntrack: Force inlining of build check to prevent build failureGeert Uytterhoeven1-1/+1
If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the build will fail with: net/built-in.o: In function `nf_conntrack_init_start': (.text+0x9baf6): undefined reference to `__compiletime_assert_1893' or ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined! Fix this by forcing inlining of total_extension_size(). Fixes: b3a5db109e0670d6 ("netfilter: conntrack: use u8 for extension sizes again") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03test_bpf: Use ULL suffix for 64-bit constantsGeert Uytterhoeven1-5/+5
On 32-bit: lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type On 32-bit systems, "long" is only 32-bit. Replace the "UL" suffix by "ULL" to fix this. Fixes: 85f68fe898320575 ("bpf, arm64: implement jiting of BPF_XADD") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03net: usb: qmi_wwan: add Telit ME910 supportDaniele Palmas1-0/+1
This patch adds support for Telit ME910 PID 0x1100. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03tg3: don't clear stats while tg3_closeYueHaibing1-4/+0
Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse its salves to get statistics,cumulative the increment.If a tg3 NIC is added to bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value (ex.1638.3 PiB) because of negative increment. Fixes: 92feeabf3f67 ("tg3: Save stats across chip resets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03selftests/bpf: get rid of -D__x86_64__Alexei Starovoitov2-2/+3
-D__x86_64__ workaround was used to make /usr/include/features.h to follow expected path through the system include headers. This is not portable. Instead define dummy stubs.h which is used by 'clang -target bpf' Fixes: 6882804c916b ("selftests/bpf: add a test for overlapping packet range checks") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03selftests/bpf: add a test case to check verifier pointer arithmeticYonghong Song3-1/+275
With clang/llvm 4.0+, the test case is able to generate the following pattern: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... commit 332270fdc8b6 ("bpf: enhance verifier to understand stack pointer arithmetic") improved verifier to handle such a pattern. This patch adds a C test case to actually generate such a pattern. A dummy tracepoint interface is used to load the program into the kernel. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03xdp: use common helper for netlink extended ack reportingDaniel Borkmann3-17/+14
Small follow-up to d74a32acd59a ("xdp: use netlink extended ACK reporting") in order to let drivers all use the same NL_SET_ERR_MSG_MOD() helper macro for reporting. This also ensures that we consistently add the driver's prefix for dumping the report in user space to indicate that the error message is driver specific and not coming from core code. Furthermore, NL_SET_ERR_MSG_MOD() now reuses NL_SET_ERR_MSG() and thus makes all macros check the pointer as suggested. References: https://www.spinics.net/lists/netdev/msg433267.html Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03net: ipv6: Do not duplicate DAD on link upDavid Ahern1-2/+3
Andrey reported a warning triggered by the rcu code: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289 debug_print_object+0x175/0x210 ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) Modules linked in: CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x192/0x22d lib/dump_stack.c:52 __warn+0x19f/0x1e0 kernel/panic.c:549 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564 debug_print_object+0x175/0x210 lib/debugobjects.c:286 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442 debug_rcu_head_queue kernel/rcu/rcu.h:75 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288 rt6_rcu_free net/ipv6/ip6_fib.c:158 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188 fib6_del_route net/ipv6/ip6_fib.c:1461 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672 ... Andrey's reproducer program runs in a very tight loop, calling 'unshare -n' and then spawning 2 sets of 14 threads running random ioctl calls. The relevant networking sequence: 1. New network namespace created via unshare -n - ip6tnl0 device is created in down state 2. address added to ip6tnl0 - equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1 - DAD is started on the address and when it completes the host route is inserted into the FIB 3. ip6tnl0 is brought up - the new fixup_permanent_addr function restarts DAD on the address 4. exit namespace - teardown / cleanup sequence starts - once in a blue moon, lo teardown appears to happen BEFORE teardown of ip6tunl0 + down on 'lo' removes the host route from the FIB since the dst->dev for the route is loobback + host route added to rcu callback list * rcu callback has not run yet, so rt is NOT on the gc list so it has NOT been marked obsolete 5. in parallel to 4. worker_thread runs addrconf_dad_completed - DAD on the address on ip6tnl0 completes - calls ipv6_ifa_notify which inserts the host route All of that happens very quickly. The result is that a host route that has been deleted from the IPv6 FIB and added to the RCU list is re-inserted into the FIB. The exit namespace eventually gets to cleaning up ip6tnl0 which removes the host route from the FIB again, calls the rcu function for cleanup -- and triggers the double rcu trace. The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably, DAD should not be started in step 2. The interface is in the down state, so it can not really send out requests for the address which makes starting DAD pointless. Since the second DAD was introduced by a recent change, seems appropriate to use it for the Fixes tag and have the fixup function only start DAD for addresses in the PREDAD state which occurs in addrconf_ifdown if the address is retained. Big thanks to Andrey for isolating a reliable reproducer for this problem. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03smsc911x: Adding support for Micochip LAN9250 Ethernet controllerDavid Cai2-19/+49
Adding support for Microchip LAN9250 Ethernet controller. Signed-off-by: David Cai <david.cai@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: export map_data[] for more info on mapsJesper Dangaard Brouer1-1/+7
Giving *_user.c side tools access to map_data[] provides easier access to information on the maps being loaded. Still provide the guarantee that the order maps are being defined in inside the _kern.c file corresponds with the order in the array. Now user tools are not blind, but can inspect and verify the maps that got loaded from the ELF binary. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: load_bpf.c make callback fixup more flexibleJesper Dangaard Brouer3-18/+23
Do this change before others start to use this callback. Change map_perf_test_user.c which seems to be the only user. This patch extends capabilities of commit 9fd63d05f3e8 ("bpf: Allow bpf sample programs (*_user.c) to change bpf_map_def"). Give fixup callback access to struct bpf_map_data, instead of only stuct bpf_map_def. This add flexibility to allow userspace to reassign the map file descriptor. This is very useful when wanting to share maps between several bpf programs. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: make bpf_load.c code compatible with ELF maps section changesJesper Dangaard Brouer1-69/+155
This patch does proper parsing of the ELF "maps" section, in-order to be both backwards and forwards compatible with changes to the map definition struct bpf_map_def, which gets compiled into the ELF file. The assumption is that new features with value zero, means that they are not in-use. For backward compatibility where loading an ELF file with a smaller struct bpf_map_def, only copy objects ELF size, leaving rest of loaders struct zero. For forward compatibility where ELF file have a larger struct bpf_map_def, only copy loaders own struct size and verify that rest of the larger struct is zero, assuming this means the newer feature was not activated, thus it should be safe for this older loader to load this newer ELF file. Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: adjust rlimit RLIMIT_MEMLOCK for traceex2, tracex3 and tracex4Jesper Dangaard Brouer3-0/+22
Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples as these are using more and larger maps than can fit in distro default 64Kbytes limit. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03netfilter: nf_tables: check if same extensions are set when adding elementsPablo Neira Ayuso1-0/+5
If no NLM_F_EXCL is set and the element already exists in the set, make sure that both elements have the same extensions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-02tipc: refactor function tipc_sk_recv_stream()Jon Paul Maloy1-84/+71
We try to make this function more readable by improving variable names and comments, using more stack variables, and doing some smaller changes to the logics. We also rename the function to make it consistent with naming conventions used elsewhere in the code. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02tipc: refactor function tipc_sk_recvmsg()Jon Paul Maloy1-59/+50
We try to make this function more readable by improving variable names and comments, plus some minor changes to the logics. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Optimize page recycling for XDPSunil Goutham2-7/+51
Driver follows a method of taking one extra reference on the page for recycling which is fine in usual packet path where each 64KB page is segmented into multiple receive buffers. But in XDP mode since there is just one receive buffer per page taking extra page reference itself becomes big bottleneck consuming ~50% of CPU cycles due to atomic operations. This patch adds a internal ref count in pgcache for each page and additional page references are taken in a batch instead of just one at a time. Internal i.e 'pgcache->ref_count' and page's i.e 'page->_refcount' counters are compared to check page's recyclability. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Support for XDP header adjustmentSunil Goutham2-17/+55
When in XDP mode reserve XDP_PACKET_HEADROOM bytes at the start of receive buffer for XDP program to modify headers and adjust packet start. Additional code changes done to handle such packets. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Add support for XDP_TXSunil Goutham3-27/+160
Adds support for XDP_TX i.e transmits packet out of the XDP TX queue mapped to the corresponding Rx queue on which packet is received. Since SQ for XDP TX will be used only on a single cpu i.e SQ description creation and freeing, using atomic free count is not necessary and will become a bottleneck. Hence added a separate 'xdp_free_cnt' used for SQs designated for XDP to track descriptor free count. Changes also include - A new entry 'xdp_page' is added to save transmitted packet's page pointer for later cleanup. - XDP Tx SQ's doorbell is ringed once per NAPI instance. - Retrieving designated SQ for packets being sent out by stack via 'nicvf_xmit'. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Add support for XDP_DROPSunil Goutham3-25/+79
Adds support for XDP_DROP. Also since in XDP mode there is just a single buffer per page, made changes to recycle DMA mapping info as well along with pages. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Add basic XDP supportSunil Goutham5-19/+199
Adds basic XDP support i.e attaching a BPF program to an interface. Also takes care of allocating separate Tx queues for XDP path and for network stack packet transmission. This patch doesn't support handling of any of the XDP actions, all are treated as XDP_PASS i.e packets will be handed over to the network stack. Changes also involve allocating one receive buffer per page in XDP mode and multiple in normal mode i.e when no BPF program is attached. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Cleanup receive buffer allocationSunil Goutham1-9/+9
Get rid of unnecessary double pointer references and type casting in receive buffer allocation code. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Optimize CQE_TX handlingSunil Goutham2-28/+21
Optimized CQE handling with below changes - Feeing descriptors back to SQ in bulk i.e once per NAPI instance instead for every CQE_TX, this will reduce number of atomic updates to 'sq->free_cnt'. - Checking errors in CQE_TX and CQE_RX before calling appropriate fn()s to update error stats i.e reduce branching. Also removed debug messages in packet handling path which otherwise causes issues if DEBUG is enabled. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Optimize RBDR descriptor handlingSunil Goutham2-13/+5
Receive buffer's physical address or iova will anyway not go beyond 49bits, since it is the max supported HW address. As per perf, updating bitfields i.e buf_addr:42 in RBDR descriptor entry consumes lots of cpu cycles, hence changed it to a 64bit field with alignment requirements taken care of. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: thunderx: Support for page recyclingSunil Goutham4-20/+119
Adds support for page recycling for allocating receive buffers to reduce cost of refilling RBDR ring. Also got rid of using compound pages when pagesize is 4K, only order-0 pages now. Only page is recycled, DMA mappings still needs to be done for every receive buffer allocated due to following constraints - Cannot have just one receive buffer per 64KB page. - There is just one buffer ring shared across 8 Rx queues, so buffers of same page can go to any Rx queue. - HW gives buffer address where packet has been DMA'ed and not the index into buffer ring. This makes it not possible to resue DMA mapping info. So unfortunately have to go through costly mapping route for every buffer. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02ipx: call ipxitf_put() in ioctl error pathDan Carpenter1-3/+2
We should call ipxitf_put() if the copy_to_user() fails. Reported-by: 李强 <liqiang6-s@360.cn> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: sched: add helpers to handle extended actionsJiri Pirko2-2/+15
Jump is now the only one using value action opcode. This is going to change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP. This also fixes the TC_ACT_JUMP check, which is incorrectly done as a bit check, not a value check. Fixes: e0ee84ded796 ("net sched actions: Complete the JUMPX opcode") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02qed*: Fix issues in the ptp filter config implementation.sudarsana.kalluru@cavium.com3-43/+98
PTP hardware filter configuration performed by the driver for a given user requested config is not correct for some of the PTP modes. Following changes are needed for PTP config-filter implementation. 1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables TimeSync/"V1 frame format support"/"V2 frame format support" on the TX side. Set the associated bits based on the user request. 2. ptp4l application fails to operate in Peer Delay mode. Following changes are needed to fix this, a. Driver should enable (set to 0) DA #1-related bits for IPv4, IPv6 and MAC destination addresses in these registers: NIG_REG_TX_LLH_PTP_RULE_MASK NIG_REG_LLH_PTP_RULE_MASK b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should be set to 0x0 in all modes. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02qede: Fix concurrency issue in PTP Tx path processing.sudarsana.kalluru@cavium.com2-2/+7
PTP Tx timestamping data structures are not protected against the concurrent access in the Tx paths. Protecting the same using atomic bit locks. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02stmmac: Add support for SIMATIC IOT2000 platformJan Kiszka1-1/+25
The IOT2000 is industrial controller platform, derived from the Intel Galileo Gen2 board. The variant IOT2020 comes with one LAN port, the IOT2040 has two of them. They can be told apart based on the board asset tag in the DMI table. Based on patch by Sascha Weisenberger. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: hns: fix ethtool_get_strings overflow in hns driverTimmy Li4-4/+4
hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated is not enough for ethtool_get_strings(), which will cause random memory corruption. When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the the following can be observed without this patch: [ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80 [ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070. [ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70) [ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk [ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k [ 43.115218] Next obj: start=ffff801fb0b69098, len=80 [ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b. [ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38) [ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_ [ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai Signed-off-by: Timmy Li <lixiaoping3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02tcp: fix wraparound issue in tcp_lpEric Dumazet1-2/+4
Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02bpf, arm64: fix jit branch offset related to ldimm64Daniel Borkmann2-4/+49
When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02bpf, arm64: implement jiting of BPF_XADDDaniel Borkmann5-5/+271
This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore completes JITing of all BPF instructions, meaning we can thus also remove the 'notyet' label and do not need to fall back to the interpreter when BPF_XADD is used in a program! This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64, where all current eBPF features are supported. BPF_W example from test_bpf: .u.insns_int = { BPF_ALU32_IMM(BPF_MOV, R0, 0x12), BPF_ST_MEM(BPF_W, R10, -40, 0x10), BPF_STX_XADD(BPF_W, R10, R0, -40), BPF_LDX_MEM(BPF_W, R0, R10, -40), BPF_EXIT_INSN(), }, [...] 00000020: 52800247 mov w7, #0x12 // #18 00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40 00000028: d280020a mov x10, #0x10 // #16 0000002c: b82b6b2a str w10, [x25,x11] // start of xadd mapping: 00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40 00000034: 8b19014a add x10, x10, x25 00000038: f9800151 prfm pstl1strm, [x10] 0000003c: 885f7d4b ldxr w11, [x10] 00000040: 0b07016b add w11, w11, w7 00000044: 880b7d4b stxr w11, w11, [x10] 00000048: 35ffffab cbnz w11, 0x0000003c // end of xadd mapping: [...] BPF_DW example from test_bpf: .u.insns_int = { BPF_ALU32_IMM(BPF_MOV, R0, 0x12), BPF_ST_MEM(BPF_DW, R10, -40, 0x10), BPF_STX_XADD(BPF_DW, R10, R0, -40), BPF_LDX_MEM(BPF_DW, R0, R10, -40), BPF_EXIT_INSN(), }, [...] 00000020: 52800247 mov w7, #0x12 // #18 00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40 00000028: d280020a mov x10, #0x10 // #16 0000002c: f82b6b2a str x10, [x25,x11] // start of xadd mapping: 00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40 00000034: 8b19014a add x10, x10, x25 00000038: f9800151 prfm pstl1strm, [x10] 0000003c: c85f7d4b ldxr x11, [x10] 00000040: 8b07016b add x11, x11, x7 00000044: c80b7d4b stxr w11, x11, [x10] 00000048: 35ffffab cbnz w11, 0x0000003c // end of xadd mapping: [...] Tested on Cavium ThunderX ARMv8, test suite results after the patch: No JIT: [ 3751.855362] test_bpf: Summary: 311 PASSED, 0 FAILED, [0/303 JIT'ed] With JIT: [ 3573.759527] test_bpf: Summary: 311 PASSED, 0 FAILED, [303/303 JIT'ed] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02bpf: Align packet data properly in program testing framework.David Miller1-5/+5
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB and XDP test runs, just like a real driver would. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-02bpf: Do not dereference user pointer in bpf_test_finish().David Miller1-4/+5
Instead, pass the kattr in which has a kernel side copy of this data structure from userspace already. Fix based upon a suggestion from Alexei Starovoitov. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-02selftests: bpf: Use bpf_endian.h in test_xdp.cDavid S. Miller1-9/+8
This fixes the testcase on big-endian. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02xdp: fix parameter kdoc for extackJakub Kicinski1-1/+1
Fix kdoc parameter spelling from extact to extack. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02bpf, samples: fix build warning in cookie_uid_helper_exampleDaniel Borkmann1-3/+3
Fix the following warnings triggered by 51570a5ab2b7 ("A Sample of using socket cookie and uid for traffic monitoring"): In file included from /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:54:0: /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c: In function 'prog_load': /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:119:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, uid)), ^ /home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM' .off = OFF, \ ^ /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:121:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, packets), 1), ^ /home/foo/net-next/samples/bpf/libbpf.h:155:12: note: in definition of macro 'BPF_ST_MEM' .off = OFF, \ ^ /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:129:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, bytes)), ^ /home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM' .off = OFF, \ ^ HOSTLD /home/foo/net-next/samples/bpf/per_socket_stats_example Fixes: 51570a5ab2b7 ("A Sample of using socket cookie and uid for traffic monitoring") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01sparc64: Fix BPF JIT wrt. branches and ldimm64 instructions.David S. Miller1-1/+2
Like other JITs, sparc64 maintains an array of instruction offsets but stores the entries off by one. This is done because jumps to the exit block are indexed to one past the last BPF instruction. So if we size the array by the program length, we need to record the previous instruction in order to stay within the array bounds. This is explained in ARM JIT commit 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()"). But this scheme requires a little bit of careful handling when the instruction before the branch destination is a 64-bit load immediate. It takes up 2 BPF instruction slots. Therefore, we have to fill in the array entry for the second half of the 64-bit load immediate instruction rather than for the one for the beginning of that instruction. Fixes: 7a12b5031c6b ("sparc64: Add eBPF JIT.") Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.