aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-sql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-01-26ixgbevf: clear rx_buffer_info in configure instead of cleanEmil Tantilov1-13/+13
Based on commit d2bead576e67 ("igb: Clear Rx buffer_info in configure instead of clean") This change makes it so that instead of going through the entire ring on Rx cleanup we only go through the region that was designated to be cleaned up and stop when we reach the region where new allocations should start. In addition we can avoid having to perform a memset on the Rx buffer_info structures until we are about to start using the ring again. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add counters for Rx page allocationsEmil Tantilov3-7/+25
We already had placehloders for failed page and buffer allocations. Added alloc_rx_page and made sure the stats are properly updated and exposed in ethtool. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: update code to better handle incrementing page countEmil Tantilov2-9/+28
Based on commit bd4171a5d4c2 ("igb: update code to better handle incrementing page count") Update the driver code so that we do bulk updates of the page reference count instead of just incrementing it by one reference at a time. The advantage to doing this is that we cut down on atomic operations and this in turn should give us a slight improvement in cycles per packet. In addition if we eventually move this over to using build_skb the gains will be more noticeable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERINGEmil Tantilov2-22/+38
Based on commit 5be5955425c2 ("igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC") and commit 7bd175928280 ("igb: Add support for DMA_ATTR_WEAK_ORDERING") Convert the calls to dma_map/unmap_page() to the attributes version and add DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING which should help improve performance on some platforms. Move sync_for_cpu call before we perform a prefetch to avoid invalidating the first 128 bytes of the packet on architectures where that call may invalidate the cache. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: use length to determine if descriptor is doneEmil Tantilov1-6/+8
Based on: commit 7ec0116c9131 ("igb: Use length to determine if descriptor is done") This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. In addition we only reset the Rx descriptor length for descriptor zero when resetting a ring instead of having to do a memset with 0 over the entire ring. By doing this we can save some time on initialization. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: only DMA sync frame lengthEmil Tantilov1-3/+4
Based on commit 64f2525ca4e7 ("igb: Only DMA sync frame length") On some architectures synching a buffer for DMA may be expensive. Instead of the entire 2K receive buffer only synchronize the length of the frame, which will typically be the MTU or smaller. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add function for checking if we can reuse pageEmil Tantilov1-26/+33
Introduce ixgbevf_can_reuse_page() similar to the change in ixgbe from commit af43da0dba0b ("ixgbe: Add function for checking to see if we can reuse page") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-25net/ipv4: Allow send to local broadcast from a socket bound to a VRFDavid Ahern3-3/+33
Message sends to the local broadcast address (255.255.255.255) require uc_index or sk_bound_dev_if to be set to an egress device. However, responses or only received if the socket is bound to the device. This is overly constraining for processes running in an L3 domain. This patch allows a socket bound to the VRF device to send to the local broadcast address by using IP_UNICAST_IF to set the egress interface with packet receipt handled by the VRF binding. Similar to IP_MULTICAST_IF, relax the constraint on setting IP_UNICAST_IF if a socket is bound to an L3 master device. In this case allow uc_index to be set to an enslaved if sk_bound_dev_if is an L3 master device and is the master device for the ifindex. In udp and raw sendmsg, allow uc_index to override the oif if uc_index master device is oif (ie., the oif is an L3 master and the index is an L3 slave). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25openvswitch: add erspan version I and II supportWilliam Tu2-1/+52
The patch adds support for openvswitch to configure erspan v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added to uapi as a binary blob to support all ERSPAN v1 and v2's fields. Note that Previous commit "openvswitch: Add erspan tunnel support." was reverted since it does not design properly. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net: erspan: create erspan metadata uapi headerWilliam Tu2-30/+54
The patch adds a new uapi header file, erspan.h, and moves the 'struct erspan_metadata' from internal erspan.h to it. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net: erspan: use bitfield instead of mask and offsetWilliam Tu3-80/+121
Originally the erspan fields are defined as a group into a __be16 field, and use mask and offset to access each field. This is more costly due to calling ntohs/htons. The patch changes it to use bitfields. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25selftests/bpf: check for chain-non-0 extack messageJakub Kicinski1-3/+13
Make sure netdevsim doesn't allow offload of chains other than 0, and that it reports the expected extack message. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25selftests/bpf: check for spurious extacks from the driverJakub Kicinski1-0/+27
Drivers should not report errors when offload is not forced. Check stdout and stderr for familiar messages when with no skip flags and with skip_hw. Check for add, replace, and destroy. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25mlxsw: use tc_cls_can_offload_and_chain0()Jakub Kicinski1-4/+2
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25i40e: use tc_cls_can_offload_and_chain0()Jakub Kicinski1-5/+3
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25ixgbe: use tc_cls_can_offload_and_chain0()Jakub Kicinski1-4/+1
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25bnxt: use tc_cls_can_offload_and_chain0()Jakub Kicinski3-5/+4
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25mlx5: use tc_cls_can_offload_and_chain0()Jakub Kicinski2-8/+2
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25cxgb4: use tc_cls_can_offload_and_chain0()Jakub Kicinski1-7/+1
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25nfp: use tc_cls_can_offload_and_chain0()Jakub Kicinski2-7/+4
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25netdevsim: use tc_cls_can_offload_and_chain0()Jakub Kicinski1-4/+1
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25pkt_cls: add new tc cls helper to check offload flag and chain indexJakub Kicinski1-0/+14
Very few (mlxsw) upstream drivers seem to allow offload of chains other than 0. Save driver developers typing and add a helper for checking both if ethtool's TC offload flag is on and if chain is 0. This helper will set the extack appropriately in both error cases. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25qed: code indent should use tabs where possibleRohit Visavalia1-5/+5
Issue found by checkpatch. Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com> Acked-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25be2net: networking block comments don't use an empty /* lineRohit Visavalia1-2/+1
Resolved Warning: networking block comments don't use an empty /* line, use /* Comment... Issue found by checkpatch. Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25cxgb4: fix possible deadlockGanesh Goudar1-10/+10
t4_wr_mbox_meat_timeout() can be called from both softirq context and process context, hence protect the mbox with spin_lock_bh() instead of simple spin_lock() Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/ipv6: Do not allow route add with a device that is downDavid Ahern1-0/+6
IPv6 allows routes to be installed when the device is not up (admin up). Worse, it does not mark it as LINKDOWN. IPv4 does not allow it and really there is no reason for IPv6 to allow it, so check the flags and deny if device is admin down. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: check for healthy link group resp. connectionsUrsula Braun4-12/+29
If a problem for at least one connection of a link group is detected, the whole link group and all its connections are terminated. This patch adds a check for healthy link group when trying to reserve a work request, and checks for healthy connections before starting a tx worker. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: wake up wr_reg_wait when terminating a link groupUrsula Braun2-11/+11
If a new connection with a new rmb is added to a link group, its memory region is registered. If a link group is terminated, a pending registration requires a wake up. And consolidate setting of tx_flag peer_conn_abort in smc_lgr_terminate(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: do not reuse a linkgroup with setup problemsUrsula Braun2-0/+20
Once a linkgroup is created successfully, it stays alive for a certain time to service more connections potentially created. If one of the initialization steps for a new linkgroup fails, the linkgroup should not be reused by other connections following. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: terminate link group for ib_post_send problemsUrsula Braun2-2/+10
If ib_post_send() fails, terminate all connections of this link group. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: handle state SMC_PEERFINCLOSEWAIT correctlyUrsula Braun1-3/+4
A state transition from closing state SMC_PEERFINCLOSEWAIT to closing state SMC_APPFINCLOSEWAIT is not allowed. Once a closing indication from the peer has been received, the socket reaches state SMC_CLOSED. And receiving a peer_conn_abort just changes the state of the socket into one of the states SMC_PROCESSABORT or SMC_CLOSED; sending a peer_conn_abort occurs in smc_close_active() for state SMC_PROCESSABORT only. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net/smc: cancel tx worker in case of socket abortsUrsula Braun1-3/+9
If an SMC socket is aborted, the tx worker should be cancelled. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support Medford2 frequency adjustment formatLaurence Evans1-14/+31
Support increased precision frequency adjustment format (FP44) used by Medford2 adapters. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support second + quarter ns time format for receive datapathEdward Cree1-33/+106
The time_format that we stash in the PTP data structure is never referenced, so we can remove it. Instead, store the information needed to interpret sync event timestamps. Also rolls in a couple of other related minor PTP fixes. Based on patches by Bert Kenward <bkenward@solarflare.com> and Laurence Evans <levans@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: support separate PTP and general timestampingLaurence Evans1-15/+43
Support MC_CMD_PTP_OUT_GET_TIMESTAMP_CORRECTIONS_V2. Extract general timestamp corrections in addition to PTP corrections. Apply receive timestamp corrections for general datapath receive timestamping, and correspondingly for transmit. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: simplify RX datapath timestampingLaurence Evans1-8/+5
Use timestamp conversion function with correction to avoid duplicate correction handling. Signed-off-by: Laurence Evans <levans@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: only advertise TX timestamping if we have the license for itMartin Habets2-1/+16
We check the license for TX hardware timestamping capability. The PTP probe will have enabled PTP sync events from the adapter. If later, at TX queue init, it turns out we do not have the license, we don't need the sync events either. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: on 8000 series use TX queues for TX timestampsEdward Cree6-13/+54
For this we create and use one or more new TX queues on the PTP channel, and enable sync events for it. Based on a patch by Martin Habets <mhabets@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: MAC TX timestamp handling on the 8000 seriesMartin Habets2-2/+46
TX timestamps on 8000 series are supplied from the MAC. This timestamp is only 48 bits long. The high order bits from the last time sync event are used for the top 16 bits. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: only enable TX timestamping if the adapter is licensed for itMartin Habets2-0/+29
If we try to enable the feature and do not have the license for it, the MCPU will refuse and fail our TX queue init. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: use main datapath for HW timestamps if availableMartin Habets2-15/+42
We can now transmit SKBs in 2 ways: 1. Via the MC (for the 7XXX series and earlier), using efx_ptp_xmit_skb_mc(). 2. Via the TX queues on the dedicated PTP channel (8XXX series and later), using efx_ptp_xmit_skb_queue(). The PTP worker thread uses the method set up at probe time. It never checked the return code from the old efx_ptp_xmit_skb(), so it now returns void. We increment the TX dropped counter of the device if the transmit fails. As a result of the probe per channel the remove gets called multiple times. Clean up efx->ptp_data properly to avoid the 2nd call blowing up. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: add function to determine which TX timestamping method to useMartin Habets2-0/+11
Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to detect whether the NIC supports timestamping packets sent out the main datapath. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: handle TX timestamps in the normal data pathMartin Habets5-9/+119
Before this work, TX timestamping is done by sending each SKB to the MC. On the 8000 series (Medford1) we have high speed timestamping via the MAC, which means we can use normal TX queues for this without a significant drop in bandwidth. On the X2000 series (Medford2) support for transmitting via the MC is removed, so the new way must be used. This patch enables timestamping on a TX queue, if requested. It also enhances TX event handling to process the extra completion events, and puts the time in the SKB. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: remove tx and MCDI handling from NAPI budget considerationBert Kenward2-30/+7
The NAPI budget is only for RX processing work, not other work such as TX or MCDI completion handling. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net: Move net:netns_ids destruction out of rtnl_lock() and document locking schemeKirill Tkhai1-18/+44
Currently, we unhash a dying net from netns_ids lists under rtnl_lock(). It's a leftover from the time when net::netns_ids was introduced. There was no net::nsid_lock, and rtnl_lock() was mostly need to order modification of alive nets nsid idr, i.e. for: for_each_net(tmp) { ... id = __peernet2id(tmp, net); idr_remove(&tmp->netns_ids, id); ... } Since we have net::nsid_lock, the modifications are protected by this local lock, and now we may introduce better scheme of netns_ids destruction. Let's look at the functions peernet2id_alloc() and get_net_ns_by_id(). Previous commits taught these functions to work well with dying net acquired from rtnl unlocked lists. And they are the only functions which can hash a net to netns_ids or obtain from there. And as easy to check, other netns_ids operating functions works with id, not with net pointers. So, we do not need rtnl_lock to synchronize cleanup_net() with all them. The another property, which is used in the patch, is that net is unhashed from net_namespace_list in the only place and by the only process. So, we avoid excess rcu_read_lock() or rtnl_lock(), when we'are iterating over the list in unhash_nsid(). All the above makes possible to keep rtnl_lock() locked only for net->list deletion, and completely avoid it for netns_ids unhashing and destruction. As these two doings may take long time (e.g., memory allocation to send skb), the patch should positively act on the scalability and signify decrease the time, which rtnl_lock() is held in cleanup_net(). Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25Bluetooth: btintel: Create common function for firmware downloadTedd Ho-Jeong An4-154/+99
The firmware download flow for RAM SKU is same for both USB and UART and this patch creates a common function for both driver. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-24kill kernel_sock_ioctl()Al Viro2-14/+0
no users since 2014 Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24dev_ioctl(): move copyin/copyout to callersAl Viro3-108/+71
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24ipconfig: use dev_set_mtu()Al Viro1-14/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24lift handling of SIOCIW... out of dev_ioctl()Al Viro4-25/+12
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.