aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-sql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-02gpio: mockup: modify the return value check for devm_irq_sim_init()Bartosz Golaszewski1-1/+1
As discussed with Marc Zyngier: irq_sim_init() and its devres variant should return the base of the allocated interrupt range on success rather than 0. This will be modified later - first, change the way users handle the return value of these routines. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_set_multiple()Bartosz Golaszewski1-0/+11
Implement the set_multiple() callback and register it with the gpiolib framework. This is only meant to also test the internal kernel API. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: tweak line breaksBartosz Golaszewski1-4/+4
Minor readability tweak: prefer breaking the lines in a way where the second part is longer than the first. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify that ngpio > 0Bartosz Golaszewski1-0/+9
Improve the module params sanitization: bail out from init if the user tries to pass a non-positive number of GPIO lines for any mockup chip. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: fix debugfs handlingBartosz Golaszewski1-5/+5
The debugfs routines returning pointers can return NULL or error codes embedded with ERR_PTR(). Check the return values with IS_ERR_OR_NULL(). While we're at it: make the error message more specific so it's not confused with the one emitted when the top-level gpio-mockup debugfs directory creation fails. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: group code by logicBartosz Golaszewski1-23/+23
Keep GPIO chip callbacks, event trigger callbacks and mockup chip setup code visibly separated. We're mostly good - just need to move the line naming routine below. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: change the type of value field in line state structBartosz Golaszewski1-1/+1
GPIO values are universally represented as integers. Change the type of the variable storing the current line value to int for consistency. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: extend the debugfs layoutBartosz Golaszewski1-2/+8
Currently each chip has a dedicated directory in debugfs for event triggers. We use the chip's label for the directory name, but the user can't really associate these directories with chip names without parsing the relevant sysfs entries. Use chip names for directory names. For backward compatibility: create links pointing to the actual directories named using the chip labels. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: pass the named_lines parameter over platform_dataBartosz Golaszewski1-1/+3
Move the last bits of code dealing with module parameters to the init function. Add a new variable to platform data, which indicates to the probe function if it should name the GPIO lines. If we ever want to make the line naming more fine-grained (e.g. per chip switch) it will be easier this way. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: merge gpio_mockup_add() into gpio_mockup_probe()Bartosz Golaszewski1-47/+31
Now that the probe() function only does what is should, there's no need to split the chip adding logic into a separate routine. Merge gpio_mockup_add() into gpio_mockup_probe(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: remove a stray tabBartosz Golaszewski1-1/+1
Minor coding style fix. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: implement gpio_mockup_err()Bartosz Golaszewski1-6/+5
Visually shrink the pr_err() calls by encapsulating adding the module name prefix to the message in a macro. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: rework device probingBartosz Golaszewski1-51/+71
We currently create a single platform device in init and then parse the configuration passed to us via module parameters in probe() before creating GPIO chips and registering them with the gpiolib framework. The relation between platform devices and mockup chips should be 1:1. Create a separate platform device for each mockup chip using convenient helpers (platform_device_register_resndata()). Pass a platform data structure to probe() in which the configuration (GPIO base, number of lines, chip index) extracted from the module params is stored. Make probe() create a single mockup chip for every platform device. This approach has several advantages: - we only parse the module parameters in init() and can bail out before attaching any device if the input is invalid (currently we would have to examine kernel logs), - we'll get notified by the device framework about errors in probe() for specific chips, - probe() gets simplified and only does what it's supposed to. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: verify the number of GPIO chips requestedBartosz Golaszewski1-1/+3
The number of supported mockup chips is limited. Check this limit when parsing the module parameters. Also: make sure that each chip is described with a <base - ngpio> pair. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: parse the module params in init, not probeBartosz Golaszewski1-3/+3
If the module parameters are invalid, we should bail out from the init function instead of detecting it during the device probe. That way we don't even allow the user to load the module if we don't accept the arguments. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: mockup: add missing prefixesBartosz Golaszewski1-11/+12
Add the gpio_mockup_ prefix to the remaining symbols that still don't have it, so that the entire driver code is consistent. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ath79: add missing MODULE_DESCRIPTION/LICENSEJesse Chan1-0/+3
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpio: Clarify that <linux/gpio.h> is legacyLinus Walleij1-0/+10
It should be clear to developers that they should not include this file in new code. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpio: omap: initialize gpioirq chip as part of gpiochip_add_dataGrygorii Strashko1-18/+14
Hence, series from Thierry Reding [1] merged - the OMAP GPIO driver can be switched to reuse new feature and just fill new struct gpio_irq_chip before calling gpiochip_add_data() instead of using few separate gpioirq chip APIs. gpiochip_add_data() will do the job and create and initialize gpioirq chip [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1531592.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: don't allow OPEN_DRAIN & OPEN_SOURCE flags simultaneouslyBartosz Golaszewski1-0/+9
Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Introduce NO_RESTRICTION quirkAndy Shevchenko2-3/+14
Allow to relax IoRestriction for certain cases. One of the use case is incorrectly cooked ACPI table where interrupt pin is defined with GpioIo() macro with IoRestrictionOutputOnly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Add quirks field to struct acpi_gpio_mappingAndy Shevchenko3-2/+11
Some broken ACPI tables might require quirks in the OS. Introduce quirks field in struct acpi_gpio_mapping. Propagate them to struct acpi_gpio_info for further use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Consolidate debug output in acpi_gpio_update_gpiod_flags()Andy Shevchenko3-12/+19
We have the duplicated debug strings printed whenever acpi_gpio_update_gpiod_flags() fails. Instead of doing this by callers, move the debug output inside function. In one case convert almost useless pr_debug() to dev_dbg() where actual consumer of GPIO resource is disclosed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Move adev member to struct acpi_gpio_infoAndy Shevchenko2-5/+7
The further improvements are based on this change since struct acpi_gpio_lookup is not available in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Don't contaminate return parameter in case of errorAndy Shevchenko1-1/+1
If error occurs, leave lookup parameter untouched. There is no functional change, since all current callers just bail out in case of error without using the assigned pieces. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Assign polarity when call acpi_populate_gpio_lookup()Andy Shevchenko1-5/+2
There is no need, since we preserve firmware settings, to override polarity for GpioInt() resources. While Documentation/gpio-properties.txt refers to any from GpioIo() / GpioInt() resources, the active_low flag has been introduced to fill the gap only for GpioIo() which lacks of that information. Moreover, in case of GpioInt() existed solution was broken anyway, it overrides only in one direction, i.e. from 0 to 1, otherwise it would be still 1 as defined in the resource macro. So, move the assignment to a right place and forbid to (semi-)override polarity for GpioInt() type of resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29gpio: max732x: Remove duplicate NULL checkAndy Shevchenko1-4/+2
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-26Linux 4.15-rc1Linus Torvalds1-2/+2
2017-11-26ARM: BUG if jumping to usermode address in kernel modeRussell King2-0/+24
Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-24m68k/macboing: Fix missed timer callback assignmentKees Cook1-2/+2
This fixes a missed function prototype callback from the timer conversions. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171123221902.GA75727@beast
2017-11-24afs: remove redundant assignment of dvnode to itselfColin Ian King1-1/+1
The assignment of dvnode to itself is redundant and can be removed. Cleans up warning detected by cppcheck: fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24afs: cell: Remove unnecessary code in afs_lookup_cellGustavo A. R. Silva1-6/+1
Due to recent changes this piece of code is no longer needed. Addresses-Coverity-ID: 1462033 Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.uk Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24afs: Fix signal handling in some file opsDavid Howells1-0/+8
afs_mkdir(), afs_create(), afs_link() and afs_symlink() all need to drop the target dentry if a signal causes the operation to be killed immediately before we try to contact the server. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24afs: Fix some dentry handling in dir ops and missing key_putsDavid Howells1-10/+5
Fix some of dentry handling in AFS directory ops: (1) Do d_drop() on the new_dentry before assigning a new inode to it in afs_vnode_new_inode(). It's fine to do this before calling afs_iget() because the operation has taken place on the server. (2) Replace d_instantiate()/d_rehash() with d_add(). (3) Don't d_drop() the new_dentry in afs_rename() on error. Also fix afs_link() and afs_rename() to call key_put() on all error paths where the key is taken. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24afs: Make afs_write_begin() avoid writing to a page that's being storedDavid Howells1-0/+5
Make afs_write_begin() wait for a page that's marked PG_writeback because: (1) We need to avoid interference with the data being stored so that the data on the server ends up in a defined state. (2) page->private is used to track the window of dirty data within a page, but it's also used by the storage code to track what's being written, being cleared by the completion notification. Ownership can't be relinquished by the storage code until completion because it a store fails, the data must be remarked dirty. Tracing shows something like the following (edited): x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-125 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store+ 0-125 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-2052 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 clear 0-2052 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store 0-0 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 WARN 0-0 The clear (completion) corresponding to the store+ (store continuation from a previous page) happens between the second begin (afs_write_begin) and the store corresponding to that. This results in the second store not seeing any data to write back, leading to the following warning: WARNING: CPU: 2 PID: 114 at ../fs/afs/write.c:403 afs_write_back_from_locked_page+0x19d/0x76c [kafs] Modules linked in: kafs(E) CPU: 2 PID: 114 Comm: kworker/u8:3 Tainted: G E 4.14.0-fscache+ #242 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: writeback wb_workfn (flush-afs-2) task: ffff8800cad72600 task.stack: ffff8800cad44000 RIP: 0010:afs_write_back_from_locked_page+0x19d/0x76c [kafs] RSP: 0018:ffff8800cad47aa0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff8800bef33a20 RCX: 0000000000000000 RDX: 000000000000000f RSI: ffffffff81c5d0e0 RDI: ffff8800cad72e78 RBP: ffff8800d31ea1e8 R08: ffff8800c1358000 R09: ffff8800ca00e400 R10: ffff8800cad47a38 R11: ffff8800c5d9e400 R12: 0000000000000000 R13: ffffea0002d9df00 R14: ffffffffa0023c1c R15: 0000000000007fdf FS: 0000000000000000(0000) GS:ffff8800ca700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f85ac6c4000 CR3: 0000000001c10001 CR4: 00000000001606e0 Call Trace: ? clear_page_dirty_for_io+0x23a/0x267 afs_writepages_region+0x1be/0x286 [kafs] afs_writepages+0x60/0x127 [kafs] do_writepages+0x36/0x70 __writeback_single_inode+0x12f/0x635 writeback_sb_inodes+0x2cc/0x452 __writeback_inodes_wb+0x68/0x9f wb_writeback+0x208/0x470 ? wb_workfn+0x22b/0x565 wb_workfn+0x22b/0x565 ? worker_thread+0x230/0x2ac process_one_work+0x2cc/0x517 ? worker_thread+0x230/0x2ac worker_thread+0x1d4/0x2ac ? rescuer_thread+0x29b/0x29b kthread+0x15d/0x165 ? kthread_create_on_node+0x3f/0x3f ? call_usermodehelper_exec_async+0x118/0x11f ret_from_fork+0x24/0x30 Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24sched/debug: Fix task state recording/printoutThomas Gleixner1-3/+3
The recent conversion of the task state recording to use task_state_index() broke the sched_switch tracepoint task state output. task_state_index() returns surprisingly an index (0-7) which is then printed with __print_flags() applying bitmasks. Not really working and resulting in weird states like 'prev_state=t' instead of 'prev_state=I'. Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a bitmask from the return value of task_state_index() and store it in entry->prev_state, which makes __print_flags() work as expected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Fixes: efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-24x86/decoder: Add new TEST instruction patternMasami Hiramatsu1-1/+1
The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at <jump_table>:ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-23x86/PCI: Remove unused HyperTransport interrupt supportBjorn Helgaas11-454/+2
There are no in-tree callers of ht_create_irq(), the driver interface for HyperTransport interrupts, left. Remove the unused entry point and all the supporting code. See 8b955b0dddb3 ("[PATCH] Initial generic hypertransport interrupt support"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-pci@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com
2017-11-23x86/umip: Fix insn_get_code_seg_params()'s return valueBorislav Petkov3-4/+4
In order to save on redundant structs definitions insn_get_code_seg_params() was made to return two 4-bit values in a char but clang complains: arch/x86/lib/insn-eval.c:780:10: warning: implicit conversion from 'int' to 'char' changes value from 132 to -124 [-Wconstant-conversion] return INSN_CODE_SEG_PARAMS(4, 8); ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./arch/x86/include/asm/insn-eval.h:16:57: note: expanded from macro 'INSN_CODE_SEG_PARAMS' #define INSN_CODE_SEG_PARAMS(oper_sz, addr_sz) (oper_sz | (addr_sz << 4)) Those two values do get picked apart afterwards the opposite way of how they were ORed so wrt to the LSByte, the return value is the same. But this function returns -EINVAL in the error case, which is an int. So make it return an int which is the native word size anyway and thus fix the clang warning. Reported-by: Kees Cook <keescook@google.com> Reported-by: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ricardo.neri-calderon@linux.intel.com Link: https://lkml.kernel.org/r/20171123091951.1462-1-bp@alien8.de
2017-11-23x86/boot/KASLR: Remove unused variableChao Fan1-3/+2
There are two variables "rc" in mem_avoid_memmap. One at the top of the function and another one inside the while() loop. Drop the outer one as it is unused. Cleanup some whitespace damage while at it. Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: n-horiguchi@ah.jp.nec.com Cc: keescook@chromium.org Link: https://lkml.kernel.org/r/20171123090847.15293-1-fanc.fnst@cn.fujitsu.com
2017-11-23genirq/matrix: Make - vs ?: Precedence explicitKees Cook1-1/+1
Noticed with a Clang build. This improves the readability of the ?: expression, as it has lower precedence than the - expression. Show explicitly that - is evaluated first. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171122205645.GA27125@beast
2017-11-23irqchip/imgpdc: Use resource_size function on resource objectVasyl Gomonovych1-1/+1
drivers/irqchip/irq-imgpdc.c:327:20-23: WARNING: Suspicious code. resource_size is maybe missing with res_regs Generated by: scripts/coccinelle/api/resource_size.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: https://lkml.kernel.org/r/1511215361-8279-1-git-send-email-gomonovych@gmail.com
2017-11-23irqchip/qcom: Fix u32 comparison with value less than zeroColin Ian King1-1/+1
The comparison of u32 nregs being less than zero is never true since nregs is unsigned. Fix this by making nregs a signed integer. Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171117183553.2739-1-colin.king@canonical.com
2017-11-24ipvlan: Fix insufficient skb linear check for ipv6 icmpGao Feng1-1/+19
In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to make sure the skb header has enough linear room for ipv6 header. But it would use the latter memory directly without linear check when it is icmp. So it still may access the unepxected memory in ipvlan_addr_lookup. Now invoke the pskb_may_pull again if it is ipv6 icmp. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24ipvlan: Fix insufficient skb linear check for arpGao Feng1-8/+8
In the function ipvlan_get_L3_hdr, current codes use pskb_may_pull to make sure the skb header has enough linear room for arp header. But it would access the arp payload in func ipvlan_addr_lookup. So it still may access the unepxected memory. Now use arp_hdr_len(port->dev) instead of the arp header as the param. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6Hangbin Liu1-1/+15
Stefano pointed that configure or show UDP_ZERO_CSUM6_RX/TX info doesn't make sense if we haven't enabled CONFIG_IPV6. Fix it by adding if IS_ENABLED(CONFIG_IPV6) check. Fixes: abe492b4f50c ("geneve: UDP checksum configuration via netlink") Fixes: fd7eafd02121 ("geneve: fix fill_info when link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHYFlorian Fainelli1-1/+1
The PHY on BCM7278 has an additional bit that needs to be cleared: IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out of suspend/resume cycles. Fixes: 0fe9933804eb ("net: dsa: bcm_sf2: Add support for BCM7278 integrated switch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: accept UFO datagrams from tuntap and packetWillem de Bruijn15-14/+209
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: realtek: r8169: implement set_link_ksettings()Tobias Jakobi1-16/+22
Commit 6fa1ba61520576cf1346c4ff09a056f2950cb3bf partially implemented the new ethtool API, by replacing get_settings() with get_link_ksettings(). This breaks ethtool, since the userspace tool (according to the new API specs) never tries the legacy set() call, when the new get() call succeeds. All attempts to chance some setting from userspace result in: > Cannot set new settings: Operation not supported Implement the missing set() call. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.