aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-sql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBManRoy Pledge1-1/+1
The QBMan block is memory mapped on SoCs above a 32 bit (4 Gigabyte) boundary so enabling 64 bit DMA addressing is needed for QBMan to be usuable. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-10-05soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlersMadalin Bucur2-3/+7
The existing code sets portal IRQ affinity to CPU 0 in the offline hotplug handler. If CPU 0 is offline this is invalid. Use a different online CPU instead. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-10-05soc: fsl: qbman: Check if CPU is offline when initializing portalsRoy Pledge3-8/+24
If the CPU to affine the portal interrupt is offline at boot time affine the portal interrupt to another online CPU. If the CPU is later brought online the hotplug handler will correctly adjust the affinity. Moved common code in a function. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-10-01soc: fsl: qman_portals: defer probe after qman's probeLaurentiu Tudor1-0/+8
Defer probe of qman portals after qman probing. This fixes the crash below, seen on NXP LS1043A SoCs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000004] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-next-20180622-00200-g986f5c179185 #9 Hardware name: LS1043A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : qman_set_sdest+0x74/0xa0 lr : qman_portal_probe+0x22c/0x470 sp : ffff00000803bbc0 x29: ffff00000803bbc0 x28: 0000000000000000 x27: ffff0000090c1b88 x26: ffff00000927cb68 x25: ffff00000927c000 x24: ffff00000927cb60 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000090e9000 x20: ffff800073b5c810 x19: ffff800027401298 x18: ffffffffffffffff x17: 0000000000000001 x16: 0000000000000000 x15: ffff0000090e96c8 x14: ffff80002740138a x13: ffff0000090f2000 x12: 0000000000000030 x11: ffff000008f25000 x10: 0000000000000000 x9 : ffff80007bdfd2c0 x8 : 0000000000004000 x7 : ffff80007393cc18 x6 : 0040000000000001 x5 : 0000000000000000 x4 : ffffffffffffffff x3 : 0000000000000004 x2 : ffff00000927c900 x1 : 0000000000000000 x0 : 0000000000000004 Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: qman_set_sdest+0x74/0xa0 platform_drv_probe+0x50/0xa8 driver_probe_device+0x214/0x2f8 __driver_attach+0xd8/0xe0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x108/0x228 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 qman_portal_driver_init+0x20/0x84 do_one_initcall+0x58/0x168 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 Code: f9400443 11001000 927e4800 8b000063 (b9400063) ---[ end trace 4f6d50489ecfb930 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-09-27soc: fsl: qbman: add APIs to retrieve the probing statusLaurentiu Tudor4-0/+38
Add a couple of new APIs to check the probing status of qman and bman: 'int bman_is_probed()' and 'int qman_is_probed()'. They return the following values. * 1 if qman/bman were probed correctly * 0 if qman/bman were not yet probed * -1 if probing of qman/bman failed Drivers that use qman/bman driver services are required to use these APIs before calling any functions exported by qman or bman drivers or otherwise they will crash the kernel. The APIs will be used in the following couple of qbman portal patches and later in the series in the dpaa1 ethernet driver. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-09-25soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()Zhao Qiang1-1/+1
There is a copy and paste bug so we accidentally use the RX_ shift when we're in TX_ mode. Fixes: bb8b2062aff3 ("fsl/qe: setup clock source for TDM mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> (cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9) Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-25soc: fsl: qbman: qman: avoid allocating from non existing gen_poolAlexandre Belloni1-0/+3
If the qman driver didn't probe, calling qman_alloc_fqid_range, qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer dereference. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> (cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a) Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-24ARM: dts: BCM63xx: Fix incorrect interrupt specifiersFlorian Fainelli1-6/+8
A number of our interrupts were incorrectly specified, fix both the PPI and SPI interrupts to be correct. Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support") Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-09-23MAINTAINERS: update the Annapurna Labs maintainer emailAntoine Tenart1-1/+1
Free Electrons became Bootlin. Update my email accordingly. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-20ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DTIcenowy Zheng1-2/+1
The R40 HDMI PHY seems to be different to the A64 one, the A64 one has no input mux, but the R40 one has. Drop the A64 fallback compatible from the HDMI PHY node in R40 DT. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [wens@csie.org: Fix subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-12ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrlLudovic Desroches1-0/+2
The drive strength has to be set to medium otherwise some data corruption may happen. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-06memory: ti-aemif: fix a potential NULL-pointer dereferenceBartosz Golaszewski1-1/+1
Platform data pointer may be NULL. We check it everywhere but in one place. Fix it. Fixes: 8af70cd2ca50 ("memory: aemif: add support for board files") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-06firmware: arm_scmi: fix divide by zero when sustained_perf_level is zeroSudeep Holla1-1/+7
Firmware can provide zero as values for sustained performance level and corresponding sustained frequency in kHz in order to hide the actual frequencies and provide only abstract values. It may endup with divide by zero scenario resulting in kernel panic. Let's set the multiplication factor to one if either one or both of them (sustained_perf_level and sustained_freq) are set to zero. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-09-05hwmon: rpi: add module alias to raspberrypi-hwmonPeter Robinson1-0/+1
The raspberrypi-hwmon driver doesn't automatically load, although it does work when loaded, by adding the alias it auto loads as expected when built as a module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with Fedora 28 and a patched 4.18 RC kernel. Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Stefan Wahren <stefan.wahren@i2se.com> CC: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-08-30soc: fsl: dpio: remove redundant pointer 'priv'Colin Ian King1-3/+0
Pointer 'priv' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable 'priv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-08-30soc: fsl/qe: Use of_get_child_by_name helperRob Herring1-5/+1
Use the of_get_child_by_name() helper instead of open coding searching for the 'firmware' child node. This removes directly accessing the name pointer as well. Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-08-29arm64: defconfig: Enable TI's AM6 SoC platformNishanth Menon1-0/+3
Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-29ARM: defconfig: Update the ARM Versatile defconfigLinus Walleij1-6/+8
This updates the ARM Versatile defconfig to the latest Kconfig structural changes and adds the DUMB VGA bridge driver so that VGA works out of the box, e.g. with QEMU. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28ARM: dts: omap4-droid4: Fix emmc errors seen on some devicesTony Lindgren1-1/+1
Otherwise we can get the following errors occasionally on some devices: mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ... I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have: # cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G and the working ones have: 0x000011 0x0100 016G92 Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first. Fixes: 7e2f8c0ae670 ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-28ARM: dts: Fix file permission for am335x-osd3358-sm-red.dtsNeeraj Dantu1-0/+0
Fix wrong mode for dts file added by commit bb3e3fbbac86 ("ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x"). Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com> CC: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-27arm64: allwinner: dts: h6: fix Pine H64 MMC bus widthIcenowy Zheng1-0/+2
Currently the enabled MMC controllers on Pine H64 do not have bus-width set, which make them fall back to 1-bit mode and become quite slow. Fix this by add the corresponding bus-width properties. Fixes: ecbd611882a1 ("arm64: allwinner: h6: enable MMC0/2 on Pine H64") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-27ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1GFabio Estevam1-0/+1
imx6sl-evk, imx6sll-evk and imx6sx-sdb boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1GFabio Estevam1-0/+1
imx23-evk and imx28-evk boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx23-evk: Convert to the new display bindingsFabio Estevam1-24/+24
imx23-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx23-evk: Move regulators outside simple-busFabio Estevam1-25/+17
It is recommended to place regulators outside simple-bus, so move them accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx28-evk: Convert to the new display bindingsFabio Estevam1-24/+24
imx28-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx28-evk: Move regulators outside simple-busFabio Estevam1-74/+61
It is recommended to place regulators outside simple-bus, so move them accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"Leonard Crestez1-4/+8
This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d. That commit followed the reference manual but unfortunately the imx7d manual is incorrect. Tested with ath9k pcie card and confirmed internally. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 1c86c9dd82f8 ("ARM: dts: imx7d: Invert legacy PCI irq mapping") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-26Linux 4.19-rc1Linus Torvalds1-2/+2
2018-08-25mm/cow: don't bother write protecting already write-protected pagesLinus Torvalds1-1/+1
This is not normally noticeable, but repeated forks are unnecessarily expensive because they repeatedly dirty the parent page tables during the page table copy operation. It's trivial to just avoid write protecting the page table entry if it was already not writable. This patch was inspired by https://bugzilla.kernel.org/show_bug.cgi?id=200447 which points to an ancient "waste time re-doing fork" issue in the presence of lots of signals. That bug was fixed by Eric Biederman's signal handling series culminating in commit c3ad2c3b02e9 ("signal: Don't restart fork when signals come in"), but the unnecessary work for repeated forks is still work just fixing, particularly since the fix is trivial. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-25hpfs: remove unnecessary checks on the value of r when assigning error codeColin Ian King1-1/+1
At the point where r is being checked for different values, r is always going to be equal to 2 as the previous if statements jump to end or end1 if r is not 2. Hence the assignment to err can be simplified to just err an assignment without any checks on the value or r. Detected by CoverityScan, CID#1226737 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-25libata: maintainership updateJens Axboe1-3/+3
Tejun Heo wrote: > > I asked Jens whether he could take care of the libata tree and he > thankfully agreed, so, from now on, Jens will be the libata > maintainer. > > Thanks a lot! Thanks for your work in this area. I still remember the first linux storage summit we did in Vancouver 2001, Tejun was invited to talk about his libata error handling work. Before that, it was basically a crap shoot if we recovered properly or not... A lot of water has flown under the bridge since then! Here's an "official" patch. Linus, can you apply it? Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-24iommu/rockchip: Move irq request past pm_runtime_enableMarc Zyngier1-11/+13
Enabling the interrupt early, before power has been applied to the device, can result in an interrupt being delivered too early if: - the IOMMU shares an interrupt with a VOP - the VOP has a pending interrupt (after a kexec, for example) In these conditions, we end-up taking the interrupt without the IOMMU being ready to handle the interrupt (not powered on). Moving the interrupt request past the pm_runtime_enable() call makes sure we can at least access the IOMMU registers. Note that this is only a partial fix, and that the VOP interrupt will still be screaming until the VOP driver kicks in, which advocates for a more synchronized interrupt enabling/disabling approach. Fixes: 0f181d3cf7d98 ("iommu/rockchip: Add runtime PM support") Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24iommu/rockchip: Handle errors returned from PM frameworkMarc Zyngier1-6/+15
pm_runtime_get_if_in_use can fail: either PM has been disabled altogether (-EINVAL), or the device hasn't been enabled yet (0). Sadly, the Rockchip IOMMU driver tends to conflate the two things by considering a non-zero return value as successful. This has the consequence of hiding other bugs, so let's handle this case throughout the driver, with a WARN_ON_ONCE so that we can try and work out what happened. Fixes: 0f181d3cf7d98 ("iommu/rockchip: Add runtime PM support") Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24arm64: rockchip: Force CONFIG_PM on Rockchip systemsMarc Zyngier1-0/+1
A number of the Rockchip-specific drivers (IOMMU, display controllers) are now assuming that CONFIG_PM is set, and may completely misbehave if that's not the case. Since there is hardly any reason for this configuration option not to be selected anyway, let's require it (in the same way Tegra already does). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24ARM: rockchip: Force CONFIG_PM on Rockchip systemsMarc Zyngier1-0/+1
A number of the Rockchip-specific drivers (IOMMU, display controllers) are now assuming that CONFIG_PM is set, and may completely misbehave if that's not the case. Since there is hardly any reason for this configuration option not to be selected anyway, let's require it (in the same way Tegra already does). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24arm64: dts: Fix various entry-method properties to reflect documentationAmit Kucheria11-12/+12
The idle-states binding documentation[1] mentions that the 'entry-method' property is required on 64-bit platforms and must be set to "psci". commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states bindings examples") attempted to fix this earlier but clearly more is needed. Fix the cpu-capacity.txt documentation that uses the incorrect value so we don't get copy-paste errors like these. Clarify the language in idle-states.txt by removing the reference to the psci bindings that might be causing this confusion. Finally, fix devicetrees of various boards to reflect current documentation. [1] Documentation/devicetree/bindings/arm/idle-states.txt (see idle-states node) Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24i2c: don't use any __deprecated handling anymoreSedat Dilek1-1/+0
This can be dropped with commit 771c035372a036f83353eef46dbb829780330234 ("deprecate the '__deprecated' attribute warnings entirely and for good") now in upstream. And we got rid of the last __deprecated use, too. Signed-off-by: Sedat Dilek <sedat.dilek@credativ.de> [wsa: shortened commit message to reflect the current situation] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-24x86/speculation/l1tf: Suggest what to do on systems with too much RAMVlastimil Babka1-0/+4
Two users have reported [1] that they have an "extremely unlikely" system with more than MAX_PA/2 memory and L1TF mitigation is not effective. Make the warning more helpful by suggesting the proper mem=X kernel boot parameter to make it effective and a link to the L1TF document to help decide if the mitigation is worth the unusable RAM. [1] https://bugzilla.suse.com/show_bug.cgi?id=1105536 Suggested-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/966571f0-9d7f-43dc-92c6-a10eec7a1254@suse.cz
2018-08-24i2c: use SPDX identifier for Renesas driversWolfram Sang5-30/+5
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-24i2c: ocores: update my email addressPeter Korsgaard4-5/+5
The old @sunsite.dk address is no longer active, so update the references. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-24i2c: remove deprecated attach_adapter callbackWolfram Sang2-16/+1
There aren't any users left. Remove this callback from the 2.4 times. Phew, finally, that took years to reach... Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-24macintosh: therm_windtunnel: drop using attach_adapterWolfram Sang1-2/+23
As we now have deferred probing, we can use a custom mechanism and finally get rid of the legacy interface from the i2c core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-24ubifs: Remove empty file.hRichard Weinberger1-0/+0
This empty file sneaked into the tree by mistake. Remove it. Fixes: 6eb61d587f45 ("ubifs: Pass struct ubifs_info to ubifs_assert()") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-24x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAMVlastimil Babka3-3/+3
Two users have reported [1] that they have an "extremely unlikely" system with more than MAX_PA/2 memory and L1TF mitigation is not effective. In fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to holes in the e820 map, the main region is almost 500MB over the 32GB limit: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable Suggestions to use 'mem=32G' to enable the L1TF mitigation while losing the 500MB revealed, that there's an off-by-one error in the check in l1tf_select_mitigation(). l1tf_pfn_limit() returns the last usable pfn (inclusive) and the range check in the mitigation path does not take this into account. Instead of amending the range check, make l1tf_pfn_limit() return the first PFN which is over the limit which is less error prone. Adjust the other users accordingly. [1] https://bugzilla.suse.com/show_bug.cgi?id=1105536 Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Reported-by: George Anchev <studio@anchev.net> Reported-by: Christopher Snowhill <kode54@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180823134418.17008-1-vbabka@suse.cz
2018-08-23mm: Change return type int to vm_fault_t for fault handlersSouptick Joarder15-103/+106
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") The aim is to change the return type of finish_fault() and handle_mm_fault() to vm_fault_t type. As part of that clean up return type of all other recursively called functions have been changed to vm_fault_t type. The places from where handle_mm_fault() is getting invoked will be change to vm_fault_t type but in a separate patch. vmf_error() is the newly introduce inline function in 4.17-rc6. [akpm@linux-foundation.org: don't shadow outer local `ret' in __do_huge_pmd_anonymous_page()] Link: http://lkml.kernel.org/r/20180604171727.GA20279@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23lib/fonts: convert comments to utf-8Arnd Bergmann4-512/+512
The font files contain bit masks for characters in the cp437 character set, and comments showing what character this is supposed to be. This only makes sense when the terminal used to view the files is set to the same codepage, but all other files in the kernel now use utf-8 encoding. This changes those comments to utf-8 as well, for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-3-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23s390: ebcdic: convert comments to UTF-8Arnd Bergmann1-18/+18
The ebcdic.c file contains tables for converting between ebcdic and PC codepage 437. I could however not identify which encoding was used for the comments. This seems to be some variation of ISO_8859-1 with non-UTF-8 escape characters. I have converted this to UTF-8 by manually removing the escape characters and then running it through recode, to get the same encoding that we use for the rest of the kernel. Link: http://lkml.kernel.org/r/20180724111600.4158975-2-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann12-103/+103
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23drivers/gpu/drm/gma500/: change return type to vm_fault_tSouptick Joarder3-27/+17
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> 1c8f422059ae ("mm: change return type to vm_fault_t") Previously vm_insert_{pfn,mixed} returns err which driver mapped into VM_FAULT_* type. The new function vmf_insert_{pfn,mixed} will replace this inefficiency by returning VM_FAULT_* type. vmf_error() is the newly introduce inline function in 4.17-rc6. Link: http://lkml.kernel.org/r/20180713154541.GA3345@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: David Airlie <airlied@linux.ie> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.