aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/check-perf-trace.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-18MIPS: ath79: add common SPI controller deviceGabor Juhos6-0/+84
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos4-0/+324
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO buttons deviceGabor Juhos5-0/+113
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common watchdog deviceGabor Juhos3-0/+12
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO LEDs deviceGabor Juhos5-0/+100
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add initial support for the Atheros PB44 reference boardGabor Juhos4-0/+73
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: utilize the MIPS multi-machine supportGabor Juhos3-0/+37
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add GPIOLIB supportGabor Juhos7-2/+252
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCsGabor Juhos20-0/+1365
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: jump label: Add MIPS support.David Daney5-0/+110
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use WARN() in uasm for better diagnostics.David Daney1-24/+16
On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Optimize TLB handlers for Octeon CPUsDavid Daney1-51/+310
Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add LDX and LWX instructions to uasm.David Daney3-1/+24
Needed by Octeon II optimized TLB handlers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Pachwork: https://patchwork.linux-mips.org/patch/1903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use BBIT instructions in TLB handlersDavid Daney1-29/+90
If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they are more efficient than an AND followed by an branch and then restoring the clobbered register. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Declare uasm bbit0 and bbit1 functions.David Daney1-0/+2
these are already defined, but declaring them allow them to be used outside of uasm.c. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use C0_KScratch (if present) to hold PGD pointer.David Daney3-18/+108
Decide at runtime to use either Context or KScratch to hold the PGD pointer. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add DINSM to uasm.David Daney2-1/+11
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Probe for presence of KScratch registers.David Daney3-0/+5
Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1877/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Add generic support for multiple machines within a single kernelGabor Juhos6-1/+157
This patch adds a generic solution to support multiple machines based on a given SoC within a single kernel image. It is implemented already for several other architectures but MIPS has no generic support for that yet. [Ralf: This competes with DT but DT is a much more complex solution and this code has been used by OpenWRT for a long time so for now DT is a bad reason to stop the merge but longer term this should be migrated to DT.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: kaloz@openwrt.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1814/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Use printf extension %pR for struct resourceJoe Perches1-5/+2
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Sibyte: Use vzalloc in sbbus profilerJoe Perches1-2/+1
Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-15Update Pekka's email address in MAINTAINERSPekka Enberg1-2/+2
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-01-15mm/slab.c: make local symbols staticH Hartley Sweeten1-3/+3
Local symbols should be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-01-15ARM: fix missing branch in __error_aRussell King1-0/+2
When DEBUG_LL is not set, we don't want __error_a re-entering __lookup_machine_type - we want it to go to the error function. This used to be the case before we reorganized the layout for hotplug cpu, as we used to fall through to __error. With the changed layout, we need an explicit branch here instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15ARM: pxa: fix building issue of missing physmap.hEric Miao1-0/+1
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-15ARM: mmp: PXA910 drive strength FAST using wrong valuePhilip Rakity1-1/+1
Drive strength for PXA910 is a 2 bit value but because of the mapping in plat-pxa/mfp.h needs to be shifted up one bit to handle real location in mfp registers. (MMP2 and PXA910 drive strength start at bit 11 while PXA168 starts at bit 10). Values 0, 1, 2, and 3 effectively need to be 0, 2, 4, and 6 to fit into register. 8 does not work. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-15ARM: mmp: MMP2 drive strength FAST using wrong valuePhilip Rakity1-1/+1
Drive strength for MMP2 is a 2 bit value but because of the mapping in plat-pxa/mfp.h needs to be shifted up one bit to handle real location in mfp registers. (MMP2 and PXA910 drive strength start at bit 11 while PXA168 starts at bit 10). Values 0, 1, 2, and 3 effectively need to be 0, 2, 4, and 6 to fit into register. 8 does not work. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: John Watlington <wad@laptop.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-15ARM: pxa: fix recursive calls in pxa_low_gpio_chipEric Miao1-27/+14
Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Marek Vasut <marek.vasut@gmail.com>
2011-01-15ARM: fix /proc/$PID/stack on SMPRussell King1-3/+6
Rabin Vincent reports: | On SMP, this BUG() in save_stack_trace_tsk() can be easily triggered | from user space by reading /proc/$PID/stack, where $PID is any pid but | the current process: | | if (tsk != current) { | #ifdef CONFIG_SMP | /* | * What guarantees do we have here that 'tsk' | * is not running on another CPU? | */ | BUG(); | #else Fix this by replacing the BUG() with an entry to terminate the stack trace, returning an empty trace - I'd rather not expose the dwarf unwinder to a volatile stack of a running thread. Reported-by: Rabin Vincent <rabin@rab.in> Tested-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15ARM: Fix build regression on SA11x0, PXA, and H720x targetsRussell King4-4/+0
Build errors similar this appeared in todays kautobuild for the above targets: In file included from arch/arm/include/asm/pgtable.h:461, from arch/arm/mach-pxa/generic.c:26: include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young': include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type None of the .c files including asm/pgtable.h with this error is using this header, so simply remove the include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-14xen: export arbitrary_virt_to_machineStephen Rothwell1-0/+1
Fixes this build error: ERROR: "arbitrary_virt_to_machine" [drivers/xen/xen-gntdev.ko] undefined! Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14Revert "drm: Update fbdev fb_fix_screeninfo"Dave Airlie5-21/+27
This reverts commit dfe63bb0ad9810db13aab0058caba97866e0a681. This commit was causing nouveau not to work properly, for -rc1 I'd prefer it worked and we can look if this is useful for 2.6.39. Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14PCI / ACPI: Fix build issue in pci_root.c for !CONFIG_PCIEPORTBUSMarkus Trippelsdorf1-0/+5
The compilation of drivers/acpi/pci_root.c fails if CONFIG_PCIEPORTBUS is unset. Fix the problem. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14ACPI / ACPICA: Initialize the global lock spinlock as appropriateRafael J. Wysocki3-2/+3
Commit 9cd0314 (ACPI / ACPICA: Fix global lock acquisition) forgot to initialize the spinlock it added. Fix that. Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14tracing: Remove syscall_exit_fieldsLai Jiangshan1-21/+12
There is no need for syscall_exit_fields as the syscall exit event class can already host the fields in its structure, like most other trace events do by default. Use that default behavior instead. Following this scheme, we don't need anymore to override the get_fields() callback of the syscall exit event class either. Hence both syscall_exit_fields and syscall_get_exit_fields() can be removed. Also changed some indentation to keep the following under 80 characters: ".fields = LIST_HEAD_INIT(event_class_syscall_exit.fields)," Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-14spi/amba-pl022: fixing compilation warning.Viresh Kumar1-1/+1
clk_freq is used uninitialized in pl022_setup routine. This patch fix compilation warning for using uninitialized variable Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-14ARM: 6625/1: use memblock memory regions for "System RAM" I/O resourcesDima Zavin1-10/+6
Do not use memory bank info to request the "system ram" resources as they do not track holes created by memblock_remove inside machine's reserve callback. If the removed memory is passed as platform_device's ioresource, then drivers that call request_mem_region would fail due to a conflict with the incorrectly configured system ram resource. Instead, iterate through the regions of memblock.memory and add those as "System RAM" resources. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-14Turn d_set_d_op() BUG_ON() into WARN_ON_ONCE()Linus Torvalds1-2/+2
It's indicative of a real problem, and it actually triggers with autofs4, but the BUG_ON() is excessive. The autofs4 case is being fixed (to only set d_op in the ->lookup method) but not merged yet. In the meantime this gets the code limping along. Reported-by: Alex Elder <aelder@sgi.com> Cc: Ian Kent <raven@themaw.net> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14i2c: Encourage move to dev_pm_ops by warning on use of legacy methodsMark Brown1-0/+8
Since the PM core wishes to transition away from the legacy suspend and resume methods and since removing them makes using PM core features like runtime PM much easier start warning when a driver is registered using the legacy methods. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-14i2c: Factor out runtime suspend checks from PM operationsMark Brown1-48/+20
When devices use dev_pm_ops the I2C API is implementing standard functionality for integration with runtime PM and for checking for the presence of a per device op. The PM core provides pm_generic_ functions implementing this behaviour - use them to reduce coupling with future PM updates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-14i2c: Unregister dummy devices last on adapter removalJean Delvare1-1/+13
Remove real devices first and dummy devices last. This gives device driver which instantiated dummy devices themselves a chance to clean them up before we do. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: stable@kernel.org
2011-01-14GRETH: resolve SMP issues and other problemsDaniel Hellstrom1-67/+92
Fixes the following: 1. POLL should not enable IRQ when work is not completed 2. No locking between TX descriptor cleaning and XMIT descriptor handling 3. No locking between RX POLL and XMIT modifying control register 4. Since TX cleaning (called from POLL) is running in parallel with XMIT unnecessary locking is needed. 5. IRQ handler looks at RX frame status solely, this is wrong when IRQ is temporarily disabled (in POLL), and when IRQ is shared. 6. IRQ handler clears IRQ status, which is unnecessary 7. TX queue was stopped in preventing cause when not MAX_SKB_FRAGS+1 descriptors were available after a SKB been scheduled by XMIT. Instead the TX queue is stopped first when not enough descriptors are available upon entering XMIT. It was hard to split up this patch in smaller pieces since all are tied together somehow. Note the RX flag used in the interrupt handler does not signal that interrupt was asserted, but that a frame was received. Same goes for TX. Also, IRQ is not asserted when the RX flag is set before enabling IRQ enable until a new frame is received. So extra care must be taken to avoid enabling IRQ and all descriptors are already used, hence dead lock will upon us. See new POLL implementation that enableds IRQ then look at the RX flag to determine if one or more IRQs may have been missed. TX/RX flags are cleared before handling previously enabled descriptors, this ensures that the RX/TX flags are valid when determining if IRQ should be turned on again. By moving TX cleaning from POLL to XMIT in the standard case, removes some locking trouble. Enabling TX cleaning from poll only when not enough TX descriptors are available is safe because the TX queue is at the same time stopped, thus XMIT will not be called. The TX queue is woken up again when enough descriptrs are available. TX Frames are always enabled with IRQ, however the TX IRQ Enable flag will not be enabled until XMIT must wait for free descriptors. Locking RX and XMIT parts of the driver from each other is needed because the RX/TX enable bits share the same register. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: handle frame error interruptsDaniel Hellstrom2-4/+7
Frame error interrupts must also be handled since the RX flag only indicates successful reception, it is unlikely but the old code may lead to dead lock if 128 error frames are recieved in a row. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: avoid writing bad speed/duplex when setting transfer modeDaniel Hellstrom1-11/+8
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: fixed skb buffer memory leak on frame errorsDaniel Hellstrom1-4/+14
A new SKB buffer should not be allocated when the old SKB is reused. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: GBit transmit descriptor handling optimizationDaniel Hellstrom1-9/+10
It is safe to enable all fragments before enabling the first descriptor, this way all descriptors don't have to be processed twice, added extra memory barrier. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: fix opening/closingDaniel Hellstrom1-0/+4
When NAPI is disabled there is no point in having IRQs enabled, TX/RX should be off before clearing the TX/RX descriptor rings. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14GRETH: added raw AMBA vendor/device number to match against.Daniel Hellstrom1-0/+3
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14cassini: Fix build bustage on x86.David S. Miller1-3/+3
Unfortunately, not all CONFIG_OF platforms provide pci_device_to_OF_node(). Change the test to CONFIG_SPARC for now to deal with the build regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-14x86, olpc: Add missing Kconfig dependenciesH. Peter Anvin1-0/+1
OLPC uses select for OLPC_OPENFIRMWARE, which means OLPC has to enforce the dependencies for OLPC_OPENFIRMWARE. Make sure it does so. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Grant Likely <grant.likely@secretlab.ca> LKML-Reference: <20100923162846.D8D409D401B@zog.reactivated.net> Cc: <stable@kernel.org> 2.6.37
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.