aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/check-perf-trace.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-07-22mwifiex: fix IRQ enable/disableDaniel Drake5-61/+57
During tear down (e.g. mwifiex_sdio_remove during system suspend), mwifiex left IRQs enabled for a significant period of time when it was unable to handle them correctly. This caused interrupt storms and interfered with the bluetooth interface on the same SDIO card. Solve this by disabling interrupts at the point when they can no longer be handled correctly, which is at the start of mwifiex_remove_card(). For cleanliness, we now enable interrupts in the mwifiex_add_card() path, to be symmetrical with the disabling of interrupts. We also couple the registration of the sdio IRQ handler with the actual enable/disable of interrupts at the hardware level. I also removed a write to this register in mwifiex_init_sdio which seemed pointless and won't cause any ill effects now that we only register the SDIO IRQ handler when we are ready to accept interrupts. Includes some corrections from Amitkumar Karwar. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18ath9k_hw: Fix multicast search for AR9002 familySujith Manoharan1-1/+9
The multicast search bit is disabled for the AR9003 family, but this is required for AR9002 too. Fix this in the INI override routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18rtlwifi: Fix build errors for unusual casesLarry Finger10-35/+91
The present build configuration for the rtlwifi family of drivers will fail under two known conditions: (1) If rtlwifi is selected without selecting any of the dependent drivers, there are errors in the build. (2) If the PCI drivers are built into the kernel and the USB drivers are modules, or vice versa, there are missing globals. The first condition is fixed by never building rtlwifi unless at least one of the device drivers is selected. The second failure is fixed by splitting the PCI and USB codes out of rtlwifi, and creating their own mini drivers. If the drivers that use them are modules, they will also be modules. Although a number of files are touched by this patch, only Makefile and Kconfig have undergone significant changes. The only modifications to the other files were to export entry points needed by the new rtl_pci and rtl_usb units, or to rename two variables that had names that were likely to cause namespace collisions. Reported-by: Fengguang Wu <fengguang.wu@intel.com> [Condition 1] Reported-by: Ben Hutchings <bhutchings@solarflare.com> [Condition 2] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18ath5k: fix extra set bit in multicast maskBob Copeland1-1/+1
Bit 32 was always set which looks to have been accidental, according to git history. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18rt2x00: RT2X00 should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `rt2x00queue_unmap_skb': drivers/net/wireless/rt2x00/rt2x00queue.c:129: undefined reference to `dma_unmap_single' drivers/net/wireless/rt2x00/rt2x00queue.c:133: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `rt2x00queue_map_txskb': drivers/net/wireless/rt2x00/rt2x00queue.c:112: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:115: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `rt2x00queue_alloc_rxskb': drivers/net/wireless/rt2x00/rt2x00queue.c:93: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:95: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-18ssb: fix alignment of struct bcma_device_idArnd Bergmann1-2/+3
The ARM OABI and EABI disagree on the alignment of structures with small members, so module init tools may interpret the ssb device table incorrectly, as shown by this warning when building the b43 device driver in an OABI kernel: FATAL: drivers/net/wireless/b43/b43: sizeof(struct ssb_device_id)=6 is not a modulo of the size of section __mod_ssb_device_table=88. Forcing the default (EABI) alignment on the structure makes this problem go away. Since the ssb_device_id may have the same problem, better fix both structures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17ath9k_htc: fix data race between request_firmware_nowait() callback and suspend()Alexey Khoroshilov1-3/+6
ath9k_hif_usb_probe() requests firmware asynchronically and there is some initialization postponed till firmware is ready. In particular, ath9k_hif_usb_firmware_cb() callback initializes hif_dev->tx.tx_buf and hif_dev->tx.tx_pending lists. At the same time, ath9k_hif_usb_suspend() iterates that lists through ath9k_hif_usb_dealloc_urbs(). If suspend happens before request_firmware_nowait() callback is called, it can lead to oops. Similar issue could be in ath9k_hif_usb_disconnect(), but it is prevented using hif_dev->fw_done completion and HIF_USB_READY flag. The patch extends this approach to suspend() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17ath9k: fix tx pending frames accounting for dropped packetsFelix Fietkau1-16/+28
When dropping packets that have gone far enough into the tx path, the pending frame counter needs to be decreased. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-17rtlwifi: Initialize power-setting callback for USB devicesLarry Finger4-13/+15
Commit a269913c5 entitled "rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue" has two bugs for USB drivers. Firstly, the work queue in question was not initialized. Secondly, the callback routine used by this queue is contained within the file used for PCI devices. As a result, it is not available for architectures without PCI hardware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Stable <stable@vger.kernel.org> [3.10] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-16mac80211/minstrel: fix NULL pointer dereference issueFelix Fietkau1-1/+2
When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move the assignment further down, after the rate_control_send_low call. Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: remove extra SSID from probe requestDavid Spinadel1-2/+4
Bits 1-21 in this channel type attributes are indication for which SSID is going to be sent on this channel. Since the first SSID is sent implicitly in the probe request, we don't need to toggle its bit here. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: fix bug in scan ssidDavid Spinadel1-2/+2
Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: refuse connection to APs with BI < 16Johannes Berg1-0/+16
Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: track the number of Rx BA sessionsEmmanuel Grumbach3-0/+17
The firmware / HW can't support more than 16 Rx BA sessions. Deny any attemps to open more sessions than that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: mvm: fix L2P BA ressources leakEmmanuel Grumbach1-2/+6
We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: mvm: Fix VIF specific debugfs directory creationAlexander Bondar1-1/+5
Avoid creating VIF specific debugfs directory if already exist. This may happen when, for example, resetting hw, suspend-resume. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: dvm: don't send BT_CONFIG on devices w/o BluetoothJohannes Berg1-1/+1
The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: mvm: unregister leds when registration failedEmmanuel Grumbach1-1/+5
This was missing and prevented any further attempts to load the module. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix duplicate retransmission detectionJohannes Berg1-2/+8
The duplicate retransmission detection code in mac80211 erroneously attempts to do the check for every frame, even frames that don't have a sequence control field or that don't use it (QoS-Null frames.) This is problematic because it causes the code to access data beyond the end of the SKB and depending on the data there will drop packets erroneously. Correct the code to not do duplicate detection for such frames. I found this error while testing AP powersave, it lead to retransmitted PS-Poll frames being dropped entirely as the data beyond the end of the SKB was always zero. Cc: stable@vger.kernel.org [all versions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16nl80211: fix the setting of RSSI threshold value for meshChun-Yeow Yeoh1-2/+2
RSSI threshold value used for mesh peering should be in negative value. After range checks to mesh parameters is introduced, this is not allowed. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix ethtool stats for non-station interfacesJohannes Berg1-0/+2
As reported in https://bugzilla.kernel.org/show_bug.cgi?id=60514, the station loop never initialises 'sinfo' and therefore adds up a stack values, leaking stack information (the number of times it adds values is easily obtained another way.) Fix this by initialising the sinfo for each station to add. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/minstrel_ht: fix cck rate samplingFelix Fietkau1-1/+9
The CCK group needs special treatment to set the right flags and rate index. Add this missing check to prevent setting broken rates for tx packets. Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16regulatory: add missing rtnl lockingJohannes Berg1-0/+2
restore_regulatory_settings() requires the RTNL to be held, add the missing locking in reg_timeout_work(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16cfg80211: fix bugs in new SME implementationJohannes Berg1-3/+26
When splitting the SME implementation from the MLME code, I introduced a few bugs: * association failures no longer sent a connect-failure event * getting disassociated from the AP caused deauth to be sent but state wasn't cleaned up, leading to warnings * authentication failures weren't cleaned up properly, causing new connection attempts to warn and fail Fix these bugs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: fix mgmt tx status and testmode reporting for netnsMichal Kazior1-2/+5
These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Cc: stable@vger.kernel.org Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-14Linux 3.11-rc1Linus Torvalds2-1604/+883
2013-07-14slub: Check for page NULL before doing the node_match checkSteven Rostedt1-1/+1
In the -rt kernel (mrg), we hit the following dump: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 PGD a2d39067 PUD b1641067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU 3 Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992 RIP: 0010:[<ffffffff811573f1>] [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP: 0018:ffff8800a9b17d70 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000 RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500 RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500 R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000) Stack: ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011 0000000001200011 0000000001200011 0000000000000000 0000000000000000 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd Call Trace: [<ffffffff81202e08>] ? current_has_perm+0x68/0x80 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30 [<ffffffff8104369a>] do_fork+0x5a/0x360 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220 [<ffffffff8100b068>] sys_clone+0x28/0x30 [<ffffffff81527423>] stub_clone+0x13/0x20 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2 RIP [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP <ffff8800a9b17d70> CR2: 0000000000000000 ---[ end trace 0000000000000002 ]--- Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do disable migration. But the SLUB code is relatively lockless, and the spin_locks there are raw_spin_locks (not converted to mutexes), thus I believe this bug can happen in mainline without -rt features. The -rt patch is just good at triggering mainline bugs ;-) Anyway, looking at where this crashed, it seems that the page variable can be NULL when passed to the node_match() function (which does not check if it is NULL). When this happens we get the above panic. As page is only used in slab_alloc() to check if the node matches, if it's NULL I'm assuming that we can say it doesn't and call the __slab_alloc() code. Is this a correct assumption? Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-14sunrpc: now we can just set ->s_d_opAl Viro1-3/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14cgroup: we can use simple_lookup() nowAl Viro1-10/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14efivarfs: we can use simple_lookup() nowAl Viro1-13/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14make simple_lookup() usable for filesystems that set ->s_d_opAl Viro1-1/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14configfs: don't open-code d_alloc_name()Al Viro1-11/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14__rpc_lookup_create_exclusive: pass string instead of qstrAl Viro1-25/+9
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14rpc_create_*_dir: don't bother with qstrAl Viro4-33/+23
just pass the name Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13llist: llist_add() can use llist_add_batch()Oleg Nesterov1-10/+4
llist_add(new, head) can simply use llist_add_batch(new, new, head), no need to duplicate the code. This obviously uninlines llist_add() and to me this is a win. But we can make llist_add_batch() inline if this is desirable, in this case gcc can notice that new_first == new_last if the caller is llist_add(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Vagin <avagin@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Howells <dhowells@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13llist: fix/simplify llist_add() and llist_add_batch()Oleg Nesterov2-22/+12
1. This is mostly theoretical, but llist_add*() need ACCESS_ONCE(). Otherwise it is not guaranteed that the first cmpxchg() uses the same value for old_entry and new_last->next. 2. These helpers cache the result of cmpxchg() and read the initial value of head->first before the main loop. I do not think this makes sense. In the likely case cmpxchg() succeeds, otherwise it doesn't hurt to reload head->first. I think it would be better to simplify the code and simply read ->first before cmpxchg(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Vagin <avagin@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Howells <dhowells@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13fput: turn "list_head delayed_fput_list" into llist_headOleg Nesterov2-15/+12
fput() and delayed_fput() can use llist and avoid the locking. This is unlikely path, it is not that this change can improve the performance, but this way the code looks simpler. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Vagin <avagin@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Howells <dhowells@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13fs/file_table.c:fput(): add commentAndrew Morton1-0/+6
A missed update to "fput: task_work_add() can fail if the caller has passed exit_task_work()". Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Vagin <avagin@openvz.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13Safer ABI for O_TMPFILEAl Viro6-8/+12
[suggested by Rasmus Villemoes] make O_DIRECTORY | O_RDWR part of O_TMPFILE; that will fail on old kernels in a lot more cases than what I came up with. And make sure O_CREAT doesn't get there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-12arm: multi_v7_defconfig: Tweaks for omap and sunxiOlof Johansson1-3/+7
OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12ipv6: only static routes qualify for equal cost multipathingHannes Frederic Sowa1-4/+11
Static routes in this case are non-expiring routes which did not get configured by autoconf or by icmpv6 redirects. To make sure we actually get an ecmp route while searching for the first one in this fib6_node's leafs, also make sure it matches the ecmp route assumptions. v2: a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF already ensures that this route, even if added again without RTF_EXPIRES (in case of a RA announcement with infinite timeout), does not cause the rt6i_nsiblings logic to go wrong if a later RA updates the expiration time later. v3: a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so, because an pmtu event could update the RTF_EXPIRES flag and we would not count this route, if another route joins this set. We now filter only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that don't get changed after rt6_info construction. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12via-rhine: fix dma mapping errorsNeil Horman1-1/+16
this bug: https://bugzilla.redhat.com/show_bug.cgi?id=951695 Reported a dma debug backtrace: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: To Be Filled By O.E.M. via-rhine 0000:00:12.0: DMA-API: device driver failed to check map error[device address=0x0000000075a837b2] [size=90 bytes] [mapped as single] Modules linked in: ip6_tables gspca_spca561 gspca_main videodev media snd_hda_codec_realtek snd_hda_intel i2c_viapro snd_hda_codec snd_hwdep snd_seq ppdev mperf via_rhine coretemp snd_pcm mii microcode snd_page_alloc snd_timer snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore parport_pc parport shpchp ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm pata_via sata_via i2c_core uinput Pid: 295, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.1.fc20.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068dd0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e4c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ec6d>] check_unmap+0x47d/0x930 [<ffffffff810ace9f>] ? local_clock+0x5f/0x70 [<ffffffff8137f17f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa0225edc>] ? rhine_ack_events.isra.14+0x3c/0x50 [via_rhine] [<ffffffffa02275f8>] rhine_napipoll+0x1d8/0xd80 [via_rhine] [<ffffffff815d3d51>] ? net_rx_action+0xa1/0x380 [<ffffffff815d3e22>] net_rx_action+0x172/0x380 [<ffffffff8107345f>] __do_softirq+0xff/0x400 [<ffffffff81073925>] irq_exit+0xb5/0xc0 [<ffffffff81724cd6>] do_IRQ+0x56/0xc0 [<ffffffff81719ff2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff8170ff57>] ? __slab_alloc+0x4c2/0x526 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff810d5807>] ? __lock_is_held+0x57/0x80 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff811bf1bf>] kmem_cache_alloc+0x2df/0x360 [<ffffffff811992e0>] mmap_region+0x2b0/0x5a0 [<ffffffff811998e6>] do_mmap_pgoff+0x316/0x3d0 [<ffffffff81183ca0>] vm_mmap_pgoff+0x90/0xc0 [<ffffffff81197d6c>] sys_mmap_pgoff+0x4c/0x190 [<ffffffff81367d7e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8101eb42>] sys_mmap+0x22/0x30 [<ffffffff81722fd9>] system_call_fastpath+0x16/0x1b Usual problem with the usual fix, add the appropriate calls to dma_mapping_error where appropriate Untested, as I don't have hardware, but its pretty straightforward Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: David S. Miller <davem@davemloft.net> CC: Roger Luethi <rl@hellgate.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12atl1e: fix dma mapping warningsNeil Horman1-3/+25
Recently had this backtrace reported: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: System Product Name ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x00000000cbfd1000] [size=90 bytes] [mapped as single] Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801 soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core pata_marvell uinput Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1 Call Trace: <IRQ> [<ffffffff81069106>] warn_slowpath_common+0x66/0x80 [<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8138151d>] check_unmap+0x47d/0x930 [<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffff8137ce30>] ? unmap_single+0x20/0x30 [<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e] [<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390 [<ffffffff811199ad>] handle_irq_event+0x3d/0x60 [<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100 [<ffffffff8101c36f>] handle_irq+0xbf/0x150 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff81073b10>] ? irq_enter+0x50/0xa0 [<ffffffff8172738d>] do_IRQ+0x4d/0xc0 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff8171c6b2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff810db5b2>] ? lock_release+0xc2/0x310 [<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50 [<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50 [<ffffffff811dcb6d>] fput+0x2d/0xc0 [<ffffffff811d8ea1>] filp_close+0x61/0x90 [<ffffffff811fae4d>] __close_fd+0x8d/0x150 [<ffffffff811d8ef0>] sys_close+0x20/0x50 [<ffffffff81725699>] system_call_fastpath+0x16/0x1b The usual straighforward failure to check for dma_mapping_error after a map operation is completed. This patch should fix it, the reporter wandered off after filing this bz: https://bugzilla.redhat.com/show_bug.cgi?id=954170 and I don't have hardware to test, but the fix is pretty straightforward, so I figured I'd post it for review. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12tcp: account all retransmit failuresYuchung Cheng1-3/+4
Change snmp RETRANSFAILS stat to include timeout retransmit failures in addition to other loss recoveries. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12usb/net/r815x: fix cast to restricted __le32hayeswang1-9/+12
>> drivers/net/usb/r815x.c:38:16: sparse: cast to restricted __le32 >> drivers/net/usb/r815x.c:67:15: sparse: cast to restricted __le32 >> drivers/net/usb/r815x.c:69:13: sparse: incorrect type in assignment (different base types) drivers/net/usb/r815x.c:69:13: expected unsigned int [unsigned] [addressable] [assigned] [usertype] tmp drivers/net/usb/r815x.c:69:13: got restricted __le32 [usertype] <noident> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Spotted-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12usb/net/r8152: fix integer overflow in expressionhayeswang1-1/+2
config: make ARCH=avr32 allyesconfig drivers/net/usb/r8152.c: In function 'rtl8152_start_xmit': drivers/net/usb/r8152.c:956: warning: integer overflow in expression 955 memset(tx_desc, 0, sizeof(*tx_desc)); > 956 tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS); 957 tp->tx_skb = skb; Signed-off-by: Hayes Wang <hayeswang@realtek.com> Spotted-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12net: access page->private by using page_privateSunghan Suh1-3/+3
Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12net: strict_strtoul is obsolete, use kstrtoul instead“Cosmin1-1/+1
patch found using checkpatch.pl Signed-off-by: Cosmin Stanescu <cosmin90stanescu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12arm: multi_v7_defconfig: add i.MX options and NFS rootVincent Stehlé1-0/+10
- Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-12perf/x86: Fix incorrect use of do_div() in NMI warningDave Hansen1-3/+4
I completely botched understanding the calling conventions of do_div(). I assumed that do_div() returned the result instead of realizing that it modifies its argument and returns a remainder. The side-effect from this would be bogus numbers for the "msecs" value in the warning messages: INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs Note, there was a second fix posted by Stephane Eranian for a separate patch which I also botched: http://lkml.kernel.org/r/20130704223010.GA30625@quad Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.