aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-18powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACKChristophe Leroy1-0/+8
power_save_ppc32_restore() is called during exception entry, before re-enabling the MMU. It substracts KERNELBASE from the address of nap_save_msscr0 to access it. With CONFIG_VMAP_STACK enabled, data MMU translation has already been re-enabled, so power_save_ppc32_restore() has to access nap_save_msscr0 by its virtual address. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7bce32ccbab3ba3e3e0f27da6961bf6313df97ed.1581663140.git.christophe.leroy@c-s.fr
2020-02-18powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACKChristophe Leroy1-2/+7
With CONFIG_VMAP_STACK, data MMU has to be enabled to read data on the stack. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d2330584f8c42d3039896e2b56f5d39676dc919c.1581669558.git.christophe.leroy@c-s.fr
2020-02-18powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACKChristophe Leroy7-45/+212
hash_page() needs to read page tables from kernel memory. When entire kernel memory is mapped by BATs, which is normally the case when CONFIG_STRICT_KERNEL_RWX is not set, it works even if the page hosting the page table is not referenced in the MMU hash table. However, if the page where the page table resides is not covered by a BAT, a DSI fault can be encountered from hash_page(), and it loops forever. This can happen when CONFIG_STRICT_KERNEL_RWX is selected and the alignment of the different regions is too small to allow covering the entire memory with BATs. This also happens when CONFIG_DEBUG_PAGEALLOC is selected or when booting with 'nobats' flag. Also, if the page containing the kernel stack is not present in the MMU hash table, registers cannot be saved and a recursive DSI fault is encountered. To allow hash_page() to properly do its job at all time and load the MMU hash table whenever needed, it must run with data MMU disabled. This means it must be called before re-enabling data MMU. To allow this, registers clobbered by hash_page() and create_hpte() have to be saved in the thread struct together with SRR0, SSR1, DAR and DSISR. It is also necessary to ensure that DSI prolog doesn't overwrite regs saved by prolog of the current running exception. That means: - DSI can only use SPRN_SPRG_SCRATCH0 - Exceptions must free SPRN_SPRG_SCRATCH0 before writing to the stack. This also fixes the Oops reported by Erhard when create_hpte() is called by add_hash_page(). Due to prolog size increase, a few more exceptions had to get split in two parts. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206501 Link: https://lore.kernel.org/r/64a4aa44686e9fd4b01333401367029771d9b231.1581761633.git.christophe.leroy@c-s.fr
2020-02-18powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal deliveryGustavo Luiz Duarte3-28/+39
After a treclaim, we expect to be in non-transactional state. If we don't clear the current thread's MSR[TS] before we get preempted, then tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in suspended transaction state. When handling a signal caught in transactional state, handle_rt_signal64() calls get_tm_stackpointer() that treclaims the transaction using tm_reclaim_current() but without clearing the thread's MSR[TS]. This can cause the TM Bad Thing exception below if later we pagefault and get preempted trying to access the user's sigframe, using __put_user(). Afterwards, when we are rescheduled back into do_page_fault() (but now in suspended state since the thread's MSR[TS] was not cleared), upon executing 'rfid' after completion of the page fault handling, the exception is raised because a transition from suspended to non-transactional state is invalid. Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32 NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000 REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2) MSR: 8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR: 44000884 XER: 00000000 CFAR: c00000000000dda4 IRQMASK: 0 PACATMSCRATCH: 800000010280b033 GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78 GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0 GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000 GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140 GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800 GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000 NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0 LR [c000000000034728] handle_rt_signal64+0x78/0xc50 Call Trace: [c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable) [c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460 [c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088 60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989 ---[ end trace 93094aa44b442f87 ]--- The simplified sequence of events that triggers the above exception is: ... # userspace in NON-TRANSACTIONAL state tbegin # userspace in TRANSACTIONAL state signal delivery # kernelspace in SUSPENDED state handle_rt_signal64() get_tm_stackpointer() treclaim # kernelspace in NON-TRANSACTIONAL state __put_user() page fault happens. We will never get back here because of the TM Bad Thing exception. page fault handling kicks in and we voluntarily preempt ourselves do_page_fault() __schedule() __switch_to(other_task) our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared __switch_to(our_task) switch_to_tm() tm_recheckpoint_new_task() trechkpt # kernelspace in SUSPENDED state The page fault handling resumes, but now we are in suspended transaction state do_page_fault() completes rfid <----- trying to get back where the page fault happened (we were non-transactional back then) TM Bad Thing # illegal transition from suspended to non-transactional This patch fixes that issue by clearing the current thread's MSR[TS] just after treclaim in get_tm_stackpointer() so that we stay in non-transactional state in case we are preempted. In order to make treclaim and clearing the thread's MSR[TS] atomic from a preemption perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is used. It's also necessary to save the previous value of the thread's MSR before get_tm_stackpointer() is called so that it can be exposed to the signal handler later in setup_tm_sigcontexts() to inform the userspace MSR at the moment of the signal delivery. Found with tm-signal-context-force-tm kernel selftest. Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com
2020-02-17powerpc/8xx: Fix clearing of bits 20-23 in ITLB missChristophe Leroy1-1/+1
In ITLB miss handled the line supposed to clear bits 20-23 on the L2 ITLB entry is buggy and does indeed nothing, leading to undefined value which could allow execution when it shouldn't. Properly do the clearing with the relevant instruction. Fixes: 74fabcadfd43 ("powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4f70c2778163affce8508a210f65d140e84524b4.1581272050.git.christophe.leroy@c-s.fr
2020-02-17powerpc/hugetlb: Fix 8M hugepages on 8xxChristophe Leroy1-0/+5
With HW assistance all page tables must be 4k aligned, the 8xx drops the last 12 bits during the walk. Redefine HUGEPD_SHIFT_MASK to mask last 12 bits out. HUGEPD_SHIFT_MASK is used to for alignment of page table cache. Fixes: 22569b881d37 ("powerpc/8xx: Enable 8M hugepage support with HW assistance") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/778b1a248c4c7ca79640eeff7740044da6a220a0.1581264115.git.christophe.leroy@c-s.fr
2020-02-17powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page sizeChristophe Leroy1-11/+18
Commit 55c8fc3f4930 ("powerpc/8xx: reintroduce 16K pages with HW assistance") redefined pte_t as a struct of 4 pte_basic_t, because in 16K pages mode there are four identical entries in the page table. But the size of hugepage tables is calculated based of the size of (void *). Therefore, we end up with page tables of size 1k instead of 4k for 512k pages. As 512k hugepage tables are the same size as standard page tables, ie 4k, use the standard page tables instead of PGT_CACHE tables. Fixes: 3fb69c6a1a13 ("powerpc/8xx: Enable 512k hugepage support with HW assistance") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/90ec56a2315be602494619ed0223bba3b0b8d619.1580997007.git.christophe.leroy@c-s.fr
2020-02-17powerpc/eeh: Fix deadlock handling dead PHBSam Bobroff1-10/+11
Recovering a dead PHB can currently cause a deadlock as the PCI rescan/remove lock is taken twice. This is caused as part of an existing bug in eeh_handle_special_event(). The pe is processed while traversing the PHBs even though the pe is unrelated to the loop. This causes the pe to be, incorrectly, processed more than once. Untangling this section can move the pe processing out of the loop and also outside the locked section, correcting both problems. Fixes: 2e25505147b8 ("powerpc/eeh: Fix crash when edev->pdev changes") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Tested-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0547e82dbf90ee0729a2979a8cac5c91665c621f.1581051445.git.sbobroff@linux.ibm.com
2020-02-16Linux 5.6-rc2Linus Torvalds1-1/+1
2020-02-15bus: moxtet: fix potential stack buffer overflowMarek Behún1-1/+1
The input_read function declares the size of the hex array relative to sizeof(buf), but buf is a pointer argument of the function. The hex array is meant to contain hexadecimal representation of the bin array. Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz Fixes: 5bc7f990cd98 ("bus: Add support for Moxtet bus") Signed-off-by: Marek Behún <marek.behun@nic.cz> Reported-by: sohu0106 <sohu0106@126.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-15ext4: improve explanation of a mount failure caused by a misconfigured kernelTheodore Ts'o1-10/+4
If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a user tries to mount a file system with the quota or project quota enabled, the kernel will emit a very confusing messsage: EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix. EXT4-fs (vdc): mount failed We will now report an explanatory message indicating which kernel configuration options have to be enabled, to avoid customer/sysadmin confusion. Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu Google-Bug-Id: 149093531 Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-14Input: cyapa - replace zero-length array with flexible-array memberGustavo A. R. Silva1-4/+4
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214172132.GA28389@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-14Input: tca6416-keypad - replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214172022.GA27490@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-14Input: gpio_keys_polled - replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214171907.GA26588@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-14IB/mlx5: Use div64_u64 for num_var_hw_entries calculationJason Gunthorpe1-1/+1
On i386: ERROR: "__udivdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! ERROR: "__divdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! Fixes: f164be8c0366 ("IB/mlx5: Extend caps stage to handle VAR capabilities") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reported-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-14nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_infoYi Zhang1-1/+1
nvme fw-activate operation will get bellow warning log, fix it by update the parameter order [ 113.231513] nvme nvme0: Get FW SLOT INFO log error Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages") Reported-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/pci: move cqe check after device shutdownKeith Busch1-5/+18
Many users have reported nvme triggered irq_startup() warnings during shutdown. The driver uses the nvme queue's irq to synchronize scanning for completions, and enabling an interrupt affined to only offline CPUs triggers the alarming warning. Move the final CQE check to after disabling the device and all registered interrupts have been torn down so that we do not have any IRQ to synchronize. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme: prevent warning triggered by nvme_stop_keep_aliveNigel Kirkland3-7/+7
Delayed keep alive work is queued on system workqueue and may be cancelled via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq. Check_flush_dependency detects mismatched attributes between the work-queue context used to cancel the keep alive work and system-wq. Specifically system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used to cancel keep alive work have WQ_MEM_RECLAIM flag. Example warning: workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc] is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core] To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq. However this creates a secondary concern where work and a request to cancel that work may be in the same work queue - namely err_work in the rdma and tcp transports, which will want to flush/cancel the keep alive work which will now be on nvme_wq. After reviewing the transports, it looks like err_work can be moved to nvme_reset_wq. In fact that aligns them better with transition into RESETTING and performing related reset work in nvme_reset_wq. Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/tcp: fix bug on double requeue when send failsAnton Eidelman1-1/+6
When nvme_tcp_io_work() fails to send to socket due to connection close/reset, error_recovery work is triggered from nvme_tcp_state_change() socket callback. This cancels all the active requests in the tagset, which requeues them. The failed request, however, was ended and thus requeued individually as well unless send returned -EPIPE. Another return code to be treated the same way is -ECONNRESET. Double requeue caused BUG_ON(blk_queued_rq(rq)) in blk_mq_requeue_request() from either the individual requeue of the failed request or the bulk requeue from blk_mq_tagset_busy_iter(, nvme_cancel_request, ); Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14cifs: make sure we do not overflow the max EA buffer sizeRonnie Sahlberg1-1/+34
RHBZ: 1752437 Before we add a new EA we should check that this will not overflow the maximum buffer we have available to read the EAs back. Otherwise we can get into a situation where the EAs are so big that we can not read them back to the client and thus we can not list EAs anymore or delete them. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2020-02-14cifs: enable change notification for SMB2.1 dialectSteve French1-0/+1
It was originally enabled only for SMB3 or later dialects, but had requests to add it to SMB2.1 mounts as well given the large number of systems at that dialect level. Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: L Walsh <cifs@tlinx.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2020-02-14netdevice.h: fix all kernel-doc and Sphinx warningsRandy Dunlap1-1/+15
Eliminate all kernel-doc and Sphinx warnings in <linux/netdevice.h>. Fixes these warnings: ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device' ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: dsa: tag_ar9331: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: dsa: tag_qca: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net, ip6_tunnel: enhance tunnel locate with link checkWilliam Dauchy1-21/+47
With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: no peer ID in CLC decline for SMCDUrsula Braun1-1/+3
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: transfer fasync_list in case of fallbackUrsula Braun1-0/+2
SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()Guangbin Huang1-6/+9
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix VF bandwidth does not take effect in some caseYonglong Liu1-1/+1
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: add management table after IMP resetYufeng Mo1-0/+7
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14perf llvm: Fix script used to obtain kernel make directives to work with new kbuildArnaldo Carvalho de Melo1-0/+1
Before this patch: # ./perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : FAILED! 39.3: Compile source for BPF prologue generation : Skip 39.4: Compile source for BPF relocation : Skip 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : FAILED! 41.4: BPF relocation checker : Skip # Using 'perf test -v' for these tests shows that it is not finding uapi/linux/fs.h, which ends up being because we don't setup the right header path. Fix it. After this patch: # perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : Ok 39.3: Compile source for BPF prologue generation : Ok 39.4: Compile source for BPF relocation : Ok 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : Ok 41.4: BPF relocation checker : Ok # Longer description: In llvm-utils.c we use some techniques to obtain the kbuild make directives and that recently stopped working as now 'ar' gets called and expects to find the dummy.o used to echo these variables: $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) Add the $(CC) line to satisfy that, making sure this works with all kernels, i.e. preserving the temp directory and files in it used for this technique we can see that it works everywhere: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:42 . drwxrwxrwt. 47 root root 1200 Feb 14 09:42 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # # cat /tmp/tmp.qgaFHgxjZ4/Makefile obj-y := dummy.o $(obj)/%.o: $(src)/%.c @echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)" $(CC) -c -o $@ $< # Then build with an old kernel Makefile: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 8 drwx------. 2 root root 100 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # And a new one: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 16 drwx------. 2 root root 160 Feb 14 09:44 . drwxrwxrwt. 47 root root 1200 Feb 14 09:44 .. -rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a -rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile -rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order # Reported-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-14mac80211: fix wrong 160/80+80 MHz settingShay Bar1-2/+14
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14cfg80211: add missing policy for NL80211_ATTR_STATUS_CODESergey Matyukevich1-0/+1
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-13Input: synaptics - remove the LEN0049 dmi id from topbuttonpad listBenjamin Tissoires1-1/+1
The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - enable SMBus on ThinkPad L470Gaurav Agrawal1-0/+1
Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - switch T470s to RMI4 by defaultLyude Paul1-0/+1
This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: gpio_keys - replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002600.GA31916@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: goldfish_events - replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002430.GA31056@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13io_uring: prune request from overflow list on flushJens Axboe1-0/+28
Carter reported an issue where he could produce a stall on ring exit, when we're cleaning up requests that match the given file table. For this particular test case, a combination of a few things caused the issue: - The cq ring was overflown - The request being canceled was in the overflow list The combination of the above means that the cq overflow list holds a reference to the request. The request is canceled correctly, but since the overflow list holds a reference to it, the final put won't happen. Since the final put doesn't happen, the request remains in the inflight. Hence we never finish the cancelation flush. Fix this by removing requests from the overflow list if we're canceling them. Cc: stable@vger.kernel.org # 5.5 Reported-by: Carter Li 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13xfrm: interface: use icmp_ndo_send helperJason A. Donenfeld1-3/+3
Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13wireguard: device: use icmp_ndo_send helperJason A. Donenfeld2-2/+13
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13sunvnet: use icmp_ndo_send helperJason A. Donenfeld1-19/+4
Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13gtp: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13icmp: introduce helper for nat'd source address in network device contextJason A. Donenfeld4-0/+79
This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: flower: add missing validation of TCA_FLOWER_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy. Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy. Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/flow_dissector: remove unexist field descriptionHangbin Liu1-1/+0
@thoff has moved to struct flow_dissector_key_control. Fixes: 42aecaa9bb2b ("net: Get skb hash over flow_keys structure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13page_pool: refill page when alloc.count of pool is zeroLi RongQing1-14/+8
"do {} while" in page_pool_refill_alloc_cache will always refill page once whether refill is true or false, and whether alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not this is wrong, and will cause overflow of pool->alloc.cache the caller of __page_pool_get_cached should provide guarantee that pool->alloc.cache is safe to access, so in_serving_softirq should be removed as suggested by Jesper Dangaard Brouer in https://patchwork.ozlabs.org/patch/1233713/ so fix this issue by calling page_pool_refill_alloc_cache() only when pool->alloc.count is zero Fixes: 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13NFSv4: Ensure the delegation cred is pinned when we call delegreturnTrond Myklebust1-3/+8
Ensure we don't release the delegation cred during the call to nfs4_proc_delegreturn(). Fixes: ee05f456772d ("NFSv4: Fix races between open and delegreturn") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-02-13NFSv4: Ensure the delegation is pinned in nfs_do_return_delegation()Trond Myklebust2-7/+27
The call to nfs_do_return_delegation() needs to be taken without any RCU locks. Add a refcount to make sure the delegation remains pinned in memory until we're done. Fixes: ee05f456772d ("NFSv4: Fix races between open and delegreturn") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.