aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-20iwlwifi: mvm: adjust to quota offloadShaul Triebitz2-0/+6
Skip Quota handling if firmware implements Quota. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: don't warn on multiple packets when opening a queueSara Sharon1-3/+2
When we have TSO enabled, we might end up segmenting it and queuing multiple packets before the queue is even enabled. This causes a warning. For example, when starting TCP traffic on a non-zero TID, the first packets may not have DSCP and will be sent on TID 0, while the actual data packets will be sent on the TID. To prevent this, simply remove the warning. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: add skb address to tx cmd in trace events dataMordechay Goodstein1-3/+4
This helps matching tx cmd with other trace events, like net_dev_xmit and net_dev_queue etc. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: fw: fix the enums in the rate scaling APIEmmanuel Grumbach1-17/+17
We don't need the _enum suffix. Also refer to &enum iwl_tlc_mng_vht_he_types instead of %IWL_TLC_MNG_VALID_VHT_HE_TYPES_\* Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: support RX flags API changeSara Sharon3-2/+9
Latest firmware calculates both phases of the TKIP field, so the TTAK ok flag is not needed and deprecated. Support this API change. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: runtime: sync FW and host clocks for logsMordechay Goodstein7-7/+313
For sync we send a marker cmd every <defined throughout debugfs> seconds. The trigger for getting gp2 clock values from the FW is set by writing to debugfs a periodic time in seconds, if value zero is written, only one request would be sent and the timer would be canceled. Also added a small infrastructure for debugfs runtime code. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: force quota update upon NoA settingShaul Triebitz1-1/+1
The way p2p NoA is forced in SCM (used for WFA tests) is by setting a quota < 100% (simulating DCM). A test-mode command is used for setting the NoA params. In that case, force quota update or nothing will happen if there was no significant change in the quota at that exact point (which is likely to be the case). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: avoid duplicate sw reset executions in the codeGolan Ben Ami5-16/+23
Most of the sw resets in the code are done by one function, which writes to the relevant CSR. Use the common function to perform the only reset which was done separately, redundant to the common code. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: support internal debug data collection for new devicesGolan Ben Ami6-42/+150
Support internal debug data collection on 9000 and newer devices. The method for finding the base and end address has changed on new HW's, so introduce a new version of debug destination tlv. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-19nfp: flower: compile Geneve encap actionsJohn Hurley2-38/+48
Generate rules for the NFP to encapsulate packets in Geneve tunnels. Move the vxlan action code to generic udp tunnel actions and use core code for both vxlan and Geneve. Only support outputting to well known port 6081. Setting tunnel options is not supported yet. Only attempt to offload if the fw supports Geneve. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: compile Geneve match fieldsJohn Hurley4-42/+91
Compile Geneve match fields for offloading to the NFP. The addition of Geneve overflows the 8 bit key_layer field, so apply extended metadata to the match cmsg allowing up to 32 more key_layer fields. Rather than adding new Geneve blocks, move the vxlan code to generic ipv4 udp tunnel structs and use these for both vxlan and Geneve. Matches are only supported when specifically mentioning well known port 6081. Geneve tunnel options are not yet included in the match. Only offload Geneve if the fw supports it - include check for this. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: read extra feature support from fwJohn Hurley2-1/+11
Extract the _abi_flower_extra_features symbol from the fw which gives a 64 bit bitmap of new features (on top of the flower base support) that the fw can offload. Store this bitmap in the priv data associated with each app. If the symbol does not exist, set the bitmap to 0. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: remove unused tun_mask variableJohn Hurley1-5/+6
The tunnel dest IP is required for separate offload to the NFP. It is already verified that a dest IP must be present and must be an exact match in the flower rule. Therefore, we can just extract the IP from the generated offload rule and remove the unused mask variable. The function is then no longer required to return the IP separately. Because tun_dst is localised to tunnel matches, move the declaration to the tunnel if branch. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: RSS table is 4k for T6Ganesh Goudar6-23/+36
RSS table is 4k for T6 and later cards, add check for the same. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net_sched: properly check for empty skb array on error pathCong Wang1-1/+7
First, the check of &q->ring.queue against NULL is wrong, it is always false. We should check the value rather than the address. Secondly, we need the same check in pfifo_fast_reset() too, as both ->reset() and ->destroy() are called in qdisc_destroy(). Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Include header descriptor support for ARP packetsThomas Falcon1-1/+6
In recent tests with new adapters, it was discovered that ARP packets were not being properly processed. This patch adds support for ARP packet headers to be passed to backing adapters, if necessary. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Increase maximum number of RX/TX queuesThomas Falcon1-1/+1
Increase the number of queues allocated to accommodate recent network adapter inclusions on the IBM vNIC platform. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Rename IBMVNIC_MAX_TX_QUEUES to IBMVNIC_MAX_QUEUESThomas Falcon2-2/+2
This value denotes the maximum number of TX queues but is used to allocate both RX and TX queues. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: Report tid start range correctly for T6Ganesh Goudar1-3/+8
For T6, tid start range should be read from LE_DB_ACTIVE_TABLE_START_INDEX_A register. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: ks8851: Support DT-provided MAC addressLukas Wunner1-2/+11
Allow the boot loader to specify the MAC address in the device tree to override the EEPROM, or in case no EEPROM is present. Cc: Ben Dooks <ben@simtec.co.uk> Cc: Tristram Ha <tristram.ha@micrel.com> Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: use platform device id directly for miibus nameJonas Gorski2-5/+1
Directly use the platform device for generating the miibus name. This removes the last user of bcm_enet_priv::mac_id and we can remove the field. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: remove pointless mac_id checkJonas Gorski1-1/+1
Enabling the ephy clock for mac 1 is harmless, and the actual usage of the ephy is not restricted to mac 0, so we might as well remove the check. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: use platform data for dma channel numbersJonas Gorski3-9/+14
To reduce the reliance on device ids, pass the dma channel numbers to the enet devices as platform data. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bcm63xx_enet: just use "enet" as the clock nameJonas Gorski1-4/+1
Now that we have the individual clocks available as "enet" we don't need to rely on the device id for them anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19geneve: speedup geneve tunnels dismantleHaishuang Yan1-8/+16
Since we now hold RTNL lock in geneve_exit_net, it's better batch them to speedup geneve tunnel dismantle. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19vxlan: speedup vxlan tunnels dismantleHaishuang Yan1-9/+17
Since we now hold RTNL lock in vxlan_exit_net, it's better to batch them to speedup vxlan tunnels dismantle. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19forcedeth: remove duplicate structure member in xmitZhu Yanjun1-12/+13
Since both first_tx_ctx and tx_skb are the head of tx ctx, it not necessary to use two structure members to statically indicate the head of tx ctx. So first_tx_ctx is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19qede: Use NETIF_F_GRO_HW.Michael Chan4-18/+25
Advertise NETIF_F_GRO_HW and set edev->gro_disable according to the feature flag. Add qede_fix_features() to drop NETIF_F_GRO_HW if XDP is running or MTU does not support GRO_HW or GRO is not set. qede_change_mtu() also checks and disables GRO_HW if MTU is not supported. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bnx2x: Use NETIF_F_GRO_HW.Michael Chan2-15/+17
Advertise NETIF_F_GRO_HW and turn on TPA_MODE_GRO when NETIF_F_GRO_HW is set. Disable NETIF_F_GRO_HW in bnx2x_fix_features() if the MTU does not support TPA_MODE_GRO or GRO is not set. bnx2x_change_mtu() also needs to disable NETIF_F_GRO_HW if the MTU does not support it. Original parameter disable_tpa will continue to disable LRO and GRO_HW. Preserve the original behavior of enabling LRO by default. User has to run ethtool -K to explicitly enable GRO_HW. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19bnxt_en: Use NETIF_F_GRO_HW.Michael Chan1-7/+20
Advertise NETIF_F_GRO_HW in hw_features if hardware GRO is supported. In bnxt_fix_features(), disable GRO_HW and LRO if current hardware configuration does not allow it. GRO_HW depends on GRO. GRO_HW is also mutually exclusive with LRO. XDP setup will now rely on bnxt_fix_features() to turn off aggregation. During chip init, turn on or off hardware GRO based on NETIF_F_GRO_HW in features flag. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: Disable GRO_HW when generic XDP is installed on a device.Michael Chan1-0/+18
Hardware should not aggregate any packets when generic XDP is installed. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: Introduce NETIF_F_GRO_HW.Michael Chan4-0/+25
Introduce NETIF_F_GRO_HW feature flag for NICs that support hardware GRO. With this flag, we can now independently turn on or off hardware GRO when GRO is on. Previously, drivers were using NETIF_F_GRO to control hardware GRO and so it cannot be independently turned on or off without affecting GRO. Hardware GRO (just like GRO) guarantees that packets can be re-segmented by TSO/GSO to reconstruct the original packet stream. Logically, GRO_HW should depend on GRO since it a subset, but we will let individual drivers enforce this dependency as they see fit. Since NETIF_F_GRO is not propagated between upper and lower devices, NETIF_F_GRO_HW should follow suit since it is a subset of GRO. In other words, a lower device can independent have GRO/GRO_HW enabled or disabled and no feature propagation is required. This will preserve the current GRO behavior. This can be changed later if we decide to propagate GRO/ GRO_HW/RXCSUM from upper to lower devices. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Hide unused variable when !CONFIG_PROC_FS.Tonghao Zhang1-1/+1
When CONFIG_PROC_FS is disabled, we will not use the prot_inuse counter. This adds an #ifdef to hide the variable definition in that case. This is not a bugfix. But we can save bytes when there are many network namespace. Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Move the socket inuse to namespace.Tonghao Zhang4-21/+51
In some case, we want to know how many sockets are in use in different _net_ namespaces. It's a key resource metric. This patch add a member in struct netns_core. This is a counter for socket-inuse in the _net_ namespace. The patch will add/sub counter in the sk_alloc, sk_clone_lock and __sk_free. This patch will not counter the socket created in kernel. It's not very useful for userspace to know how many kernel sockets we created. The main reasons for doing this are that: 1. When linux calls the 'do_exit' for process to exit, the functions 'exit_task_namespaces' and 'exit_task_work' will be called sequentially. 'exit_task_namespaces' may have destroyed the _net_ namespace, but 'sock_release' called in 'exit_task_work' may use the _net_ namespace if we counter the socket-inuse in sock_release. 2. socket and sock are in pair. More important, sock holds the _net_ namespace. We counter the socket-inuse in sock, for avoiding holding _net_ namespace again in socket. It's a easy way to maintain the code. Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19sock: Change the netns_core member name.Tonghao Zhang2-6/+6
Change the member name will make the code more readable. This patch will be used in next patch. Signed-off-by: Martin Zhang <zhangjunweimartin@didichuxing.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18cxgb4: Simplify PCIe Completion Timeout settingBjorn Helgaas1-18/+3
Simplify PCIe Completion Timeout setting by using the pcie_capability_clear_and_set_word() interface. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: reload pointer after pskb_may_pullWilliam Tu2-2/+6
pskb_may_pull() can change skb->data, so we need to re-load pkt_md and ershdr at the right place. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: erspan: fix wrong return valueWilliam Tu2-2/+2
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM. Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: William Tu <u9012063@gmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18phylink: fix locking assertsRussell King1-17/+17
Use ASSERT_RTNL() rather than WARN_ON(!lockdep_rtnl_is_held()) which stops working when lockdep fires, and we end up with lots of warnings. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix EEPROM reading in the case of non-SFF8472 SFPsRussell King1-4/+3
The EEPROM reading was trying to read from the second EEPROM address if we requested the last byte from the SFF8079 EEPROM, which caused a failure when the second EEPROM is not present. Discovered with a S-RJ01 SFP module. Fix this. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfp: fix non-detection of PHYRussell King1-4/+4
The detection of a PHY changed in commit e98a3aabf85f ("mdio_bus: don't return NULL from mdiobus_scan()") which now causes sfp to print an error message. Update for this change. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net/ncsi: Don't take any action on HNCDSC AENSamuel Mendoza-Jonas1-32/+3
The current HNCDSC handler takes the status flag from the AEN packet and will update or change the current channel based on this flag and the current channel status. However the flag from the HNCDSC packet merely represents the host link state. While the state of the host interface is potentially interesting information it should not affect the state of the NCSI link. Indeed the NCSI specification makes no mention of any recommended action related to the host network controller driver state. Update the HNCDSC handler to record the host network driver status but take no other action. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: join the authorsJerome Brunet1-0/+1
Following previous changes, join the other authors of this driver and take the blame with them Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: add interrupt supportJerome Brunet1-1/+36
Enable interrupt support in meson-gxl PHY driver Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: leave CONFIG_A6 untouchedJerome Brunet1-9/+0
The PHY performs just as well when left in its default configuration and it makes senses because this poke gets reset just after init. According to the documentation, all registers in the Analog/DSP bank are reset when there is a mode switch from 10BT to 100BT. The bank is also reset on power down and soft reset, so we will never see the value which may have been set by the bootloader. In the end, we have used the default configuration so far and there is no reason to change now. Remove CONFIG_A6 poke to make this clear. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: use genphy_config_initJerome Brunet1-1/+1
Use the generic init function to populate some of the phydev structure fields Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: add read and write helpers for banked registersJerome Brunet1-61/+69
Add read and write helpers to manipulate banked registers on this PHY This helps clarify the settings applied to these registers and what the driver actually does Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: define control registersJerome Brunet1-20/+66
Define registers and bits in meson-gxl PHY driver to make a bit more human friendly. No functional change. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: meson-gxl: check phy_write return valueJerome Brunet1-12/+38
Always check phy_write return values. Better to be safe than sorry Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sfc: populate the timer reload fieldBert Kenward1-2/+3
The timer mode register now has a separate field for the reload value. Since we always use this timer with the reload (for interrupt moderation) we set this to the same as the initial value. Previous hardware ignores this field, so we can safely set these bits on all hardware that uses this register. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.