aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-10nfsd: Reset the boot verifier on all write I/O errorsTrond Myklebust1-4/+15
If multiple clients are writing to the same file, then due to the fact we share a single file descriptor between all NFSv3 clients writing to the file, we have a situation where clients can miss the fact that their file data was not persisted. While this should be rare, it could cause silent data loss in situations where multiple clients are using NLM locking or O_DIRECT to write to the same file. Unfortunately, the stateless nature of NFSv3 and the fact that we can only identify clients by their IP address means that we cannot trivially cache errors; we would not know when it is safe to release them from the cache. So the solution is to declare a reboot. We understand that this should be a rare occurrence, since disks are usually stable. The most frequent occurrence is likely to be ENOSPC, at which point all writes to the given filesystem are likely to fail anyway. So the expectation is that clients will be forced to retry their writes until they hit the fatal error. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: Don't garbage collect files that might contain write errorsTrond Myklebust1-1/+42
If a file may contain unstable writes that can error out, then we want to avoid garbage collecting the struct nfsd_file that may be tracking those errors. So in the garbage collector, we try to avoid collecting files that aren't clean. Furthermore, we avoid immediately kicking off the garbage collector in the case where the reference drops to zero for the case where there is a write error that is being tracked. If the file is unhashed while an error is pending, then declare a reboot, to ensure the client resends any unstable writes. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: Support the server resetting the boot verifierTrond Myklebust5-15/+48
Add support to allow the server to reset the boot verifier in order to force clients to resend I/O after a timeout failure. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: nfsd_file cache entries should be per net namespaceTrond Myklebust4-14/+25
Ensure that we can safely clear out the file cache entries when the nfs server is shut down on a container. Otherwise, the file cache may end up pinning the mounts. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-28nfsd: eliminate an unnecessary acl size limitJ. Bruce Fields2-9/+13
We're unnecessarily limiting the size of an ACL to less than what most filesystems will support. Some users do hit the limit and it's confusing and unnecessary. It still seems prudent to impose some limit on the number of ACEs the client gives us before passing it straight to kmalloc(). So, let's just limit it to the maximum number that would be possible given the amount of data left in the argument buffer. That will still leave one limit beyond whatever the filesystem imposes: the client and server negotiate a limit on the size of a request, which we have to respect. But we're no longer imposing any additional arbitrary limit. struct nfs4_ace is 20 bytes on my system and the maximum call size we'll negotiate is about a megabyte, so in practice this is limiting the allocation here to about a megabyte. Reported-by: "de Vandiere, Louis" <louis.devandiere@atos.net> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-26Deprecate nfsd fault injectionJ. Bruce Fields1-1/+1
This is only useful for client testing. I haven't really maintained it, and reference counting and locking are wrong at this point. You can get some of the same functionality now from nfsd/clients/. It was a good idea but I think its time has passed. In the unlikely event of users, hopefully the BROKEN dependency will prompt them to speak up. Otherwise I expect to remove it soon. Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-20nfsd: remove duplicated include from filecache.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: Fix the documentation for svcxdr_tmpalloc()Trond Myklebust1-3/+3
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: Fix up some unused variable warningsTrond Myklebust1-7/+4
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: close cached files prior to a REMOVE or RENAME that would replace targetJeff Layton1-9/+53
It's not uncommon for some workloads to do a bunch of I/O to a file and delete it just afterward. If knfsd has a cached open file however, then the file may still be open when the dentry is unlinked. If the underlying filesystem is nfs, then that could trigger it to do a sillyrename. On a REMOVE or RENAME scan the nfsd_file cache for open files that correspond to the inode, and proactively unhash and put their references. This should prevent any delete-on-last-close activity from occurring, solely due to knfsd's open file cache. This must be done synchronously though so we use the variants that call flush_delayed_fput. There are deadlock possibilities if you call flush_delayed_fput while holding locks, however. In the case of nfsd_rename, we don't even do the lookups of the dentries to be renamed until we've locked for rename. Once we've figured out what the target dentry is for a rename, check to see whether there are cached open files associated with it. If there are, then unwind all of the locking, close them all, and then reattempt the rename. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: rip out the raparms cacheJeff Layton3-167/+1
The raparms cache was set up in order to ensure that we carry readahead information forward from one RPC call to the next. In other words, it was set up because each RPC call was forced to open a struct file, then close it, causing the loss of readahead information that is normally cached in that struct file, and used to keep the page cache filled when a user calls read() multiple times on the same file descriptor. Now that we cache the struct file, and reuse it for all the I/O calls to a given file by a given user, we no longer have to keep a separate readahead cache. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: have nfsd_test_lock use the nfsd_file cacheJeff Layton1-4/+4
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cacheJeff Layton5-74/+68
Have nfs4_preprocess_stateid_op pass back a nfsd_file instead of a filp. Since we now presume that the struct file will be persistent in most cases, we can stop fiddling with the raparms in the read code. This also means that we don't really care about the rd_tmp_file field anymore. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: convert fi_deleg_file and ls_file fields to nfsd_fileJeff Layton5-81/+85
Have them keep an nfsd_file reference instead of a struct file. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: convert nfs4_file->fi_fds array to use nfsd_filesJeff Layton2-18/+19
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook nfsd_commit up to the nfsd_file cacheJeff Layton1-7/+7
Use cached filps if possible instead of opening a new one every time. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfsd_read to the nfsd_file cacheJeff Layton1-7/+4
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfsd_write to the new nfsd_file cacheJeff Layton1-5/+7
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: add a new struct file caching facility to nfsdJeff Layton9-24/+1155
Currently, NFSv2/3 reads and writes have to open a file, do the read or write and then close it again for each RPC. This is highly inefficient, especially when the underlying filesystem has a relatively slow open routine. This patch adds a new open file cache to knfsd. Rather than doing an open for each RPC, the read/write handlers can call into this cache to see if there is one already there for the correct filehandle and NFS_MAY_READ/WRITE flags. If there isn't an entry, then we create a new one and attempt to perform the open. If there is, then we wait until the entry is fully instantiated and return it if it is at the end of the wait. If it's not, then we attempt to take over construction. Since the main goal is to speed up NFSv2/3 I/O, we don't want to close these files on last put of these objects. We need to keep them around for a little while since we never know when the next READ/WRITE will come in. Cache entries have a hardcoded 1s timeout, and we have a recurring workqueue job that walks the cache and purges any entries that have expired. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19vfs: Export flush_delayed_fput for use by knfsd.Trond Myklebust1-0/+1
Allow knfsd to flush the delayed fput list so that it can ensure the cached struct file is closed before it is unlinked. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19notify: export symbols for use by the knfsd file cacheTrond Myklebust4-2/+10
The knfsd file cache will need to detect when files are unlinked, so that it can close the associated cached files. Export a minimal set of notifier functions to allow it to do so. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19locks: create a new notifier chain for lease attemptsJeff Layton2-0/+66
With the new file caching infrastructure in nfsd, we can end up holding files open for an indefinite period of time, even when they are still idle. This may prevent the kernel from handing out leases on the file, which is something we don't want to block. Fix this by running a SRCU notifier call chain whenever on any lease attempt. nfsd can then purge the cache for that inode before returning. Since SRCU is only conditionally compiled in, we must only define the new chain if it's enabled, and users of the chain must ensure that SRCU is enabled. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19sunrpc: add a new cache_detail operation for when a cache is flushedJeff Layton2-0/+4
When the exports table is changed, exportfs will usually write a new time to the "flush" file in the nfsd.export cache procfile. This tells the kernel to flush any entries that are older than that value. This gives us a mechanism to tell whether an unexport might have occurred. Add a new ->flush cache_detail operation that is called after flushing the cache whenever someone writes to a "flush" file. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19svcrdma: Use llist for managing cache of recv_ctxtsChuck Lever3-18/+14
Use a wait-free mechanism for managing the svc_rdma_recv_ctxts free list. Subsequently, sc_recv_lock can be eliminated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19svcrdma: Remove svc_rdma_wqChuck Lever3-9/+2
Clean up: the system workqueue will work just as well. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-16nfsd: Remove unnecessary NULL checksJ. Bruce Fields1-20/+15
"cb" is never actually NULL in these functions. On a quick skim of the history, they seem to have been there from the beginning. I'm not sure if they originally served a purpose. Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-16nfsd4: Fix kernel crash when reading proc file reply_cache_statsHe Zhe1-1/+1
reply_cache_stats uses wrong parameter as seq file private structure and thus causes the following kernel crash when users read /proc/fs/nfsd/reply_cache_stats BUG: kernel NULL pointer dereference, address: 00000000000001f9 PGD 0 P4D 0 Oops: 0000 [#3] SMP PTI CPU: 6 PID: 1502 Comm: cat Tainted: G D 5.3.0-rc3+ #1 Hardware name: Intel Corporation Broadwell Client platform/Basking Ridge, BIOS BDW-E2R1.86C.0118.R01.1503110618 03/11/2015 RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0 Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00 RSP: 0018:ffffaa520106fe08 EFLAGS: 00010246 RAX: 000000cfe1a77123 RBX: 0000000000000000 RCX: 0000000000291b46 RDX: 000000cf00000000 RSI: 0000000000000006 RDI: 0000000000291b28 RBP: ffffaa520106fe20 R08: 0000000000000006 R09: 000000cfe17e55dd R10: ffffa424e47c0000 R11: 000000000000030b R12: 0000000000000001 R13: ffffa424e5697000 R14: 0000000000000001 R15: ffffa424e5697000 FS: 00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0 Call Trace: seq_read+0x194/0x3e0 __vfs_read+0x1b/0x40 vfs_read+0x95/0x140 ksys_read+0x61/0xe0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x4d/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f805728b861 Code: fe ff ff 50 48 8d 3d 86 b4 09 00 e8 79 e0 01 00 66 0f 1f 84 00 00 00 00 00 48 8d 05 d9 19 0d 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 48 83 ec 28 48 89 54 RSP: 002b:00007ffea1ce3c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f805728b861 RDX: 0000000000020000 RSI: 00007f8057183000 RDI: 0000000000000003 RBP: 00007f8057183000 R08: 00007f8057182010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 0000559a60e8ff10 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Modules linked in: CR2: 00000000000001f9 ---[ end trace 01613595153f0cba ]--- RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0 Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00 RSP: 0018:ffffaa52004b3e08 EFLAGS: 00010246 RAX: 0000002bab45a7c6 RBX: 0000000000000000 RCX: 0000000000291b4c RDX: 0000002b00000000 RSI: 0000000000000004 RDI: 0000000000291b28 RBP: ffffaa52004b3e20 R08: 0000000000000004 R09: 0000002bab1c8c7a R10: ffffa424e5500000 R11: 00000000000002a9 R12: 0000000000000001 R13: ffffa424e4475000 R14: 0000000000000001 R15: ffffa424e4475000 FS: 00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0 Killed Fixes: 3ba75830ce17 ("nfsd4: drc containerization") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: initialize i_private before d_addJ. Bruce Fields1-6/+6
A process could race in an open and attempt to read one of these files before i_private is initialized, and get a spurious error. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: use i_wrlock instead of rcu for nfsdfs i_privateJ. Bruce Fields1-4/+2
synchronize_rcu() gets called multiple times each time a client is destroyed. If the laundromat thread has a lot of clients to destroy, the delay can be noticeable. This was causing pynfs test RENEW3 to fail. We could embed an rcu_head in each inode and do the kref_put in an rcu callback. But simplest is just to take a lock here. (I also wonder if the laundromat thread would be better replaced by a bunch of scheduled work or timers or something.) Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: fix dentry leak upon mkdir failure.Tetsuo Handa1-0/+1
syzbot is reporting that nfsd_mkdir() forgot to remove dentry created by d_alloc_name() when __nfsd_mkdir() failed (due to memory allocation fault injection) [1]. [1] https://syzkaller.appspot.com/bug?id=ce41a1f769ea4637ebffedf004a803e8405b4674 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+2c95195d5d433f6ed6cb@syzkaller.appspotmail.com> Fixes: e8a79fb14f6b76b5 ("nfsd: add nfsd/clients directory") [bfields: clean up in nfsd_mkdir instead of __nfsd_mkdir] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-30SUNRPC: Track writers of the 'channel' file to improve cache_listeners_existDave Wysochanski2-7/+11
The sunrpc cache interface is susceptible to being fooled by a rogue process just reading a 'channel' file. If this happens the kernel may think a valid daemon exists to service the cache when it does not. For example, the following may fool the kernel: cat /proc/net/rpc/auth.unix.gid/channel Change the tracking of readers to writers when considering whether a listener exists as all valid daemon processes either open a channel file O_RDWR or O_WRONLY. While this does not prevent a rogue process from "stealing" a message from the kernel, it does at least improve the kernels perception of whether a valid process servicing the cache exists. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-28Linux 5.3-rc2Linus Torvalds1-1/+1
2019-07-27kbuild: remove unused single-used-mMasahiro Yamada1-2/+0
This is unused since commit 9f69a496f100 ("kbuild: split out *.mod out of {single,multi}-used-m rules"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-27gen_compile_commands: lower the entry count thresholdMasahiro Yamada1-2/+2
Running gen_compile_commands.py after building the kernel with allnoconfig gave this: $ ./scripts/gen_compile_commands.py WARNING: Found 449 entries. Have you compiled the kernel? Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-27.gitignore: Add compilation database fileToru Komatsu1-0/+3
This file is used by clangd to use language server protocol. It can be generated at each compile using scripts/gen_compile_commands.py. Therefore it is different depending on the environment and should be ignored. Signed-off-by: Toru Komatsu <k0ma@utam0k.jp> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-27kbuild: remove unused objectify macroMasahiro Yamada1-3/+0
Commit 415008af3219 ("docs-rst: convert lsm from DocBook to ReST") removed the last users of this macro. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-26dt-bindings: Fix more $id value mismatches filenamesRob Herring11-11/+11
The path in the schema '$id' values are wrong. Fix them. Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-26dt-bindings: nvmem: SID: Fix the examples node namesMaxime Ripard1-2/+2
Now that the examples are validated, the examples in the SID binding generates an error since the node names aren't one of the valid ones. Let's switch for one that is ok. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-26dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindingsMaxime Ripard3-80/+139
The nvmem providers and consumers have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [Srini: Changed licence to (GPL-2.0 OR BSD-2-Clause)] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-26of: Fix typo in kerneldocThierry Reding1-1/+1
"Findfrom" is not a word. Replace the function synopsis by something that makes sense. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-26block: fix max segment size handling in blk_queue_virt_boundaryChristoph Hellwig1-1/+2
We should only set the max segment size to unlimited if we actually have a virt boundary. Otherwise we accidentally clear that limit when called from the SCSI midlayer, which always calls blk_queue_virt_boundary, even if that mask is 0. Fixes: 7ad388d8e4c7 ("scsi: core: add a host / host template field for the virt boundary") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-26docs: phy: Drop duplicate 'be made'Guido Günther1-2/+2
Fix duplicate words. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-26fix the struct mount leak in umount_tree()Al Viro1-2/+2
We need to drop everything we remove from the tree, whether mnt_has_parent() is true or not. Usually the bug manifests as a slow memory leak (leaked struct mount for initramfs); it becomes much more visible in mount_subtree() users, such as btrfs. There we leak a struct mount for btrfs superblock being mounted, which prevents fs shutdown on subsequent umount. Fixes: 56cbb429d911 ("switch the remnants of releasing the mountpoint away from fs_pin") Reported-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-26MAINTAINERS: vfio-ccw: Remove myself as the maintainerFarhan Ali1-1/+0
I will not be able to continue with my maintainership responsibilities going forward, so remove myself as the maintainer. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26s390/mm: use shared variables for sysctl range checkVasily Gorbik1-4/+2
Since commit eec4844fae7c ("proc/sysctl: add shared variables for range check") special shared variables are available for sysctl range check. Reuse them for /proc/sys/vm/allocate_pgste proc handler. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26virtio/s390: fix race on airq_areas[]Halil Pasic1-0/+4
The access to airq_areas was racy ever since the adapter interrupts got introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390: make airq summary indicators DMA") this became an issue in practice as well. Namely before that commit the airq_info that got overwritten was still functional. After that commit however the two infos share a summary_indicator, which aggravates the situation. Which means auto-online mechanism occasionally hangs the boot with virtio_blk. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Cc: stable@vger.kernel.org Fixes: 96b14536d935 ("virtio-ccw: virtio-ccw adapter interrupt support.") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26s390/dma: provide proper ARCH_ZONE_DMA_BITS valueHalil Pasic1-0/+2
On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits. The current value is 24 and makes __dma_direct_alloc_pages() take a wrong turn first (but __dma_direct_alloc_pages() recovers then). Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Petr Tesarik <ptesarik@suse.cz> Fixes: c61e9637340e ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_rangeNaohiro Aota1-5/+6
btrfs_lock_and_flush_ordered_range() loads given "*cached_state" into cachedp, which, in general, is NULL. Then, lock_extent_bits() updates "cachedp", but it never goes backs to the caller. Thus the caller still see its "cached_state" to be NULL and never free the state allocated under btrfs_lock_and_flush_ordered_range(). As a result, we will see massive state leak with e.g. fstests btrfs/005. Fix this bug by properly handling the pointers. Fixes: bd80d94efb83 ("btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25Makefile: Globally enable fall-through warningGustavo A. R. Silva2-0/+17
Now that all the fall-through warnings have been addressed in the kernel, enable the fall-through warning globally. Also, update the deprecated.rst file to include implicit fall-through as 'deprecated' so people can be pointed to a single location for justification. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-25drm/i915: Mark expected switch fall-throughsGustavo A. R. Silva6-4/+5
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/gpu/drm/i915/gem/i915_gem_mman.c: In function ‘i915_gem_fault’: drivers/gpu/drm/i915/gem/i915_gem_mman.c:342:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!i915_terminally_wedged(i915)) ^ drivers/gpu/drm/i915/gem/i915_gem_mman.c:345:2: note: here case -EAGAIN: ^~~~ drivers/gpu/drm/i915/gem/i915_gem_pages.c: In function ‘i915_gem_object_map’: ./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’ unlikely(__ret_warn_on); \ ^~~~~~~~ drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’ #define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \ ^~~~ drivers/gpu/drm/i915/gem/i915_gem_pages.c:270:3: note: in expansion of macro ‘MISSING_CASE’ MISSING_CASE(type); ^~~~~~~~~~~~ drivers/gpu/drm/i915/gem/i915_gem_pages.c:272:2: note: here case I915_MAP_WB: ^~~~ drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘error_record_engine_registers’: ./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’ unlikely(__ret_warn_on); \ ^~~~~~~~ drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’ #define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \ ^~~~ drivers/gpu/drm/i915/i915_gpu_error.c:1196:5: note: in expansion of macro ‘MISSING_CASE’ MISSING_CASE(engine->id); ^~~~~~~~~~~~ drivers/gpu/drm/i915/i915_gpu_error.c:1197:4: note: here case RCS0: ^~~~ drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_get_fia_supported_lane_count’: ./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’ unlikely(__ret_warn_on); \ ^~~~~~~~ drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’ #define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \ ^~~~ drivers/gpu/drm/i915/display/intel_dp.c:233:3: note: in expansion of macro ‘MISSING_CASE’ MISSING_CASE(lane_info); ^~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:234:2: note: here case 1: ^~~~ drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’: CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/cursgv100.o drivers/gpu/drm/i915/display/intel_display.c:12043:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (WARN_ON(!HAS_DDI(to_i915(dev)))) ^ drivers/gpu/drm/i915/display/intel_display.c:12046:3: note: here case INTEL_OUTPUT_DP: ^~~~ Also, notice that the Makefile is modified to stop ignoring fall-through warnings. The -Wimplicit-fallthrough option will be enabled globally in v5.3. Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.