| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The recent kernel added lost count can be read from either read(2) or
ring buffer data with PERF_SAMPLE_READ. As it's a variable length data
we need to access it according to the format info.
But for perf tools use cases, PERF_FORMAT_ID is always set. So we can
only check PERF_FORMAT_LOST bit to determine the data format.
Add sample_read_value_size() and next_sample_read_value() helpers to
make it a bit easier to access. Use them in all places where it reads
the struct sample_read_value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the trivial change in:
119a784c81270eb8 ("perf/core: Add a new read format to get a number of lost samples")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
43bb9e000ea4c621 ("KVM: x86: Tweak name of MONITOR/MWAIT #UD quirk to make it #UD specific")
94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members")
bfbcc81bb82cbbad ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior")
b172862241b48499 ("KVM: x86: PIT: Preserve state of speaker port data bit")
ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Link: https://lore.kernel.org/lkml/Yv6OMPKYqYSbUxwZ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
2f4073e08f4cc5a4 ("KVM: VMX: Enable Notify VM exit")
That makes 'perf kvm-stat' aware of this new NOTIFY exit reason, thus
addressing the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tao Xu <tao3.xu@intel.com>
Link: http://lore.kernel.org/lkml/Yv6LavXMZ+njijpq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
f345a0143b4dd1cf ("vhost-vdpa: uAPI to suspend the device")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-08-18 09:46:12.355958316 -0300
+++ after 2022-08-18 09:46:19.701182822 -0300
@@ -29,6 +29,7 @@
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
[0x7C] = "VDPA_SET_GROUP_ASID",
+ [0x7D] = "VDPA_SUSPEND",
};
= {
[0x00] = "GET_FEATURES",
$
For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_SUSPEND will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yv6Kb4OESuNJuH6X@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Link: http://lore.kernel.org/lkml/YvzwMXzaIzOU4WAY@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
8a061562e2f2b32b ("RISC-V: KVM: Add extensible CSR emulation framework")
f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report")
450a563924ae9437 ("KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats")
1b870fa5573e260b ("kvm: stats: tell userspace which values are boolean")
db1c875e0539518e ("KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices")
94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members")
084cc29f8bbb034c ("KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis")
2f4073e08f4cc5a4 ("KVM: VMX: Enable Notify VM exit")
ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault")
e9bf3acb23f0a6e1 ("KVM: s390: Add KVM_CAP_S390_PROTECTED_DUMP")
8aba09588d2af37c ("KVM: s390: Add CPU dump functionality")
0460eb35b443f73f ("KVM: s390: Add configuration dump functionality")
fe9a93e07ba4f29d ("KVM: s390: pv: Add query dump information")
35d02493dba1ae63 ("KVM: s390: pv: Add query interface")
c24a950ec7d60c4d ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata for SEV-ES")
ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.")
661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version")
536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode")
942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID")
2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events")
That just rebuilds perf, as these patches add just an ioctl that is S390
specific and may clash with other arches, so are so far being excluded
in the harvester script:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
$ grep 390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Anup Patel <anup@brainfault.org>
Cc: Ben Gardon <bgardon@google.com>
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: João Martins <joao.m.martins@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tao Xu <tao3.xu@intel.com>
Link: https://lore.kernel.org/lkml/YvzuryClcn%2FvA0Gn@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
a913bde810fc464d ("drm/i915: Update i915 uapi documentation")
525e93f6317a08a0 ("drm/i915/uapi: add NEEDS_CPU_ACCESS hint")
141f733bb3abb000 ("drm/i915/uapi: expose the avail tracking")
3f4309cbdc849637 ("drm/i915/uapi: add probed_cpu_visible_size")
a50794f26f52c66c ("uapi/drm/i915: Document memory residency and Flat-CCS capability of obj")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Link: http://lore.kernel.org/lkml/Yvzrp9RFIeEkb5fI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
2b1299322016731d ("x86/speculation: Add RSB VM Exit protections")
28a99e95f55c6185 ("x86/amd: Use IBPB for firmware calls")
4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior")
26aae8ccbc197223 ("x86/cpu/amd: Enumerate BTC_NO")
9756bba28470722d ("x86/speculation: Fill RSB on vmexit for IBRS")
3ebc170068885b6f ("x86/bugs: Add retbleed=ibpb")
2dbb887e875b1de3 ("x86/entry: Add kernel IBRS implementation")
6b80b59b35557065 ("x86/bugs: Report AMD retbleed vulnerability")
a149180fbcf336e9 ("x86: Add magic AMD return-thunk")
15e67227c49a5783 ("x86: Undo return-thunk damage")
a883d624aed463c8 ("x86/cpufeatures: Move RETPOLINE flags to word 11")
aae99a7c9ab371b2 ("x86/cpufeatures: Introduce x2AVIC CPUID bit")
6f33a9daff9f0790 ("x86: Fix comment for X86_FEATURE_ZEN")
51802186158c74a0 ("x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Wyes Karny <wyes.karny@amd.com>
Link: https://lore.kernel.org/lkml/Yvznmu5oHv0ZDN2w@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption")
That don't result in any changes in tooling, just causes this to be
rebuilt:
CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o
LD /tmp/build/perf-urgent/trace/beauty/perf-in.o
addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/lkml/Yvzl8C7O1b+hf9GS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
2b1299322016731d ("x86/speculation: Add RSB VM Exit protections")
4af184ee8b2c0a69 ("tools/power turbostat: dump secondary Turbo-Ratio-Limit")
4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior")
d7caac991feeef1b ("x86/cpu/amd: Add Spectral Chicken")
6ad0ad2bf8a67e27 ("x86/bugs: Report Intel retbleed vulnerability")
c59a1f106f5cd484 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
465932db25f36648 ("x86/cpu: Add new VMX feature, Tertiary VM-Execution control")
027bbb884be006b0 ("KVM: x86/speculation: Disable Fill buffer clear within guests")
51802186158c74a0 ("x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-08-17 09:05:13.938246475 -0300
+++ after 2022-08-17 09:05:22.221455851 -0300
@@ -161,6 +161,7 @@
[0x0000048f] = "IA32_VMX_TRUE_EXIT_CTLS",
[0x00000490] = "IA32_VMX_TRUE_ENTRY_CTLS",
[0x00000491] = "IA32_VMX_VMFUNC",
+ [0x00000492] = "IA32_VMX_PROCBASED_CTLS3",
[0x000004c1] = "IA32_PMC0",
[0x000004d0] = "IA32_MCG_EXT_CTL",
[0x00000560] = "IA32_RTIT_OUTPUT_BASE",
@@ -212,6 +213,7 @@
[0x0000064D] = "PLATFORM_ENERGY_STATUS",
[0x0000064e] = "PPERF",
[0x0000064f] = "PERF_LIMIT_REASONS",
+ [0x00000650] = "SECONDARY_TURBO_RATIO_LIMIT",
[0x00000658] = "PKG_WEIGHTED_CORE_C0_RES",
[0x00000659] = "PKG_ANY_CORE_C0_RES",
[0x0000065A] = "PKG_ANY_GFXE_C0_RES",
$
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Like Xu <like.xu@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/YvzbT24m2o5U%2F7+q@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
7fa875b8e53c288d ("net: copy from user before calling __copy_msghdr")
ebe73a284f4de8c5 ("net: Allow custom iter handler in msghdr")
7c701d92b2b5e517 ("skbuff: carry external ubuf_info in msghdr")
c04245328dd7e915 ("net: make __sys_accept4_file() static")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: David Ahern <dsahern@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/lkml/YvzYs+F+Xzq8Hvvp@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_cpu_map__max() computes the cpumap's maximum value, no need to
iterate over all values.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make the cpumap arguments const to make it clearer they are in rather
than out arguments. Make two functions static and remove external
declarations.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allows max() to be used with 'const struct perf_cpu_maps *'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit c164fbb40c43f("x86/mm: thread pgprot_t through
init_memory_mapping()") mistakenly used __pgprot() which doesn't respect
__default_kernel_pte_mask when setting PUD mapping.
Fix it by only setting the one bit we actually need (PSE) and leaving
the other bits (that have been properly masked) alone.
Fixes: c164fbb40c43 ("x86/mm: thread pgprot_t through init_memory_mapping()")
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following BUG was reported:
traps: Missing ENDBR: andw_ax_dx+0x0/0x10 [kvm]
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/traps.c:253!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<TASK>
asm_exc_control_protection+0x2b/0x30
RIP: 0010:andw_ax_dx+0x0/0x10 [kvm]
Code: c3 cc cc cc cc 0f 1f 44 00 00 66 0f 1f 00 48 19 d0 c3 cc cc cc
cc 0f 1f 40 00 f3 0f 1e fa 20 d0 c3 cc cc cc cc 0f 1f 44 00 00
<66> 0f 1f 00 66 21 d0 c3 cc cc cc cc 0f 1f 40 00 66 0f 1f 00 21
d0
? andb_al_dl+0x10/0x10 [kvm]
? fastop+0x5d/0xa0 [kvm]
x86_emulate_insn+0x822/0x1060 [kvm]
x86_emulate_instruction+0x46f/0x750 [kvm]
complete_emulated_mmio+0x216/0x2c0 [kvm]
kvm_arch_vcpu_ioctl_run+0x604/0x650 [kvm]
kvm_vcpu_ioctl+0x2f4/0x6b0 [kvm]
? wake_up_q+0xa0/0xa0
The BUG occurred because the ENDBR in the andw_ax_dx() fastop function
had been incorrectly "sealed" (converted to a NOP) by apply_ibt_endbr().
Objtool marked it to be sealed because KVM has no compile-time
references to the function. Instead KVM calculates its address at
runtime.
Prevent objtool from annotating fastop functions as sealable by creating
throwaway dummy compile-time references to the functions.
Fixes: 6649fa876da4 ("x86/ibt,kvm: Add ENDBR to fastops")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Debugged-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <0d4116f90e9d0c1b754bb90c585e6f0415a1c508.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SETCC_ALIGN and FOP_ALIGN are both 16. Remove the special casing for
FOP_SETCC() and just make it a normal fastop.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <7c13d94d1a775156f7e36eed30509b274a229140.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a macro which prevents a function from getting sealed if there are
no compile-time references to it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <20220818213927.e44fmxkoq4yj6ybn@treble>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_INTERNAL_MEM_SLOTS better reflects the fact those slots are KVM
internally used (invisible to userspace) and avoids confusion to future
private slots that can have different meaning.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-2-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_PRIVATE_MEM_SLOTS defaults to zero, so it is not necessary to
define it in MIPS's asm/kvm_host.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices. Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.
Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090a9a0 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device. Commit 2b3c246a682c ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().
Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf38 ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbebee ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Properly unwind VM creation if kvm_create_vm_debugfs() fails. A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cbebee ("KVM:
Prevent module exit until all VMs are freed"). The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.
Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment). x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).
Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.
Fixes: b74ed7a68ec1 ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix the warning:
drivers/perf/riscv_pmu_legacy.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Fixes: 9b3e150e310e ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220812143532.1962623-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This device does not remember its MAC address, so add a possibility
to get it from the platform. If it fails, generate a random address.
This will provide a MAC address early during boot without user space
being involved.
Also remove extra calls to is_valid_ether_addr().
Made after suggestions by Andrew Lunn:
1) Use eth_hw_addr_random() to assign a random MAC address during probe.
2) Remove is_valid_ether_addr() from moxart_mac_open()
3) Add a call to platform_get_ethdev_address() during probe
4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this
v1 -> v2:
Handle EPROBE_DEFER returned from platform_get_ethdev_address().
Move MAC reading code to the beginning of the probe function.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
CC: Yang Yingliang <yangyingliang@huawei.com>
CC: Pavel Skripkin <paskripkin@gmail.com>
CC: Guobin Huang <huangguobin4@huawei.com>
CC: Yang Wei <yang.wei9@zte.com.cn>
CC: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When skb->len==0, the recv_actor() returns 0 too, but we also use 0
for error conditions. This patch amends this by propagating the errors
to tcp_read_skb() so that we can distinguish skb->len==0 case from
error cases.
Fixes: 04919bed948d ("tcp: Introduce tcp_read_skb()")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As tcp_read_skb() only reads one skb at a time, the while loop is
unnecessary, we can turn it into an if. This also simplifies the
code logic.
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it
assumes the skb is not yet dequeued. This is no longer true for
tcp_read_skb() case where we dequeue the skb first.
Fix this by introducing a helper __tcp_cleanup_rbuf() which does
not require any skb and calling it in tcp_read_skb().
Fixes: 04919bed948d ("tcp: Introduce tcp_read_skb()")
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before commit 965b57b469a5 ("net: Introduce a new proto_ops
->read_skb()"), skb was not dequeued from receive queue hence
when we close TCP socket skb can be just flushed synchronously.
After this commit, we have to uncharge skb immediately after being
dequeued, otherwise it is still charged in the original sock. And we
still need to retain skb->sk, as eBPF programs may extract sock
information from skb->sk. Therefore, we have to call
skb_set_owner_sk_safe() here.
Fixes: 965b57b469a5 ("net: Introduce a new proto_ops ->read_skb()")
Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com
Tested-by: Stanislav Fomichev <sdf@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.
(FREE from device detaching) | (USE from requests)
igb_remove | igb_msix_other
igb_disable_sriov | igb_msg_task
kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count
adapter->vfs_allocated_count = 0 |
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lots of double occurrences of "the" were replaced by single occurrences,
but some of them should become "to the" instead.
Fixes: 12e5bde18d7f6ca4 ("dt-bindings: Fix typo in comment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If construction of the array of policies fails when recording
non-first policy we need to unwind.
netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.
Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com
Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping")
Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()
This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.
"
However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.
So this call should now be called from intel_eth_pci_remove().
Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With special lengths supplied by user space, register_shm_helper() has
an integer overflow when calculating the number of pages covered by a
supplied user space memory region.
This causes internal_get_user_pages_fast() a helper function of
pin_user_pages_fast() to do a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Modules linked in:
CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pc : internal_get_user_pages_fast+0x474/0xa80
Call trace:
internal_get_user_pages_fast+0x474/0xa80
pin_user_pages_fast+0x24/0x4c
register_shm_helper+0x194/0x330
tee_shm_register_user_buf+0x78/0x120
tee_ioctl+0xd0/0x11a0
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x48/0x114
Fix this by adding an an explicit call to access_ok() in
tee_shm_register_user_buf() to catch an invalid user space address
early.
Fixes: 033ddf12bcf5 ("tee: add register user memory")
Cc: stable@vger.kernel.org
Reported-by: Nimish Mishra <neelam.nimish@gmail.com>
Reported-by: Anirban Chakraborty <ch.anirban00727@gmail.com>
Reported-by: Debdeep Mukhopadhyay <debdeep.mukhopadhyay@gmail.com>
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We do test on a virtio scsi device (/dev/sda) and the default mq
scheduler is 'none'. We found a IO hung as following:
blk_finish_plug
blk_mq_plug_issue_direct
scsi_mq_get_budget
//get budget_token fail and sdev->restarts=1
scsi_end_request
scsi_run_queue_async
//sdev->restart=0 and run queue
blk_mq_request_bypass_insert
//add request to hctx->dispatch list
//continue to dispath plug list
blk_mq_dispatch_plug_list
blk_mq_try_issue_list_directly
//success issue all requests from plug list
After .get_budget fail, scsi_mq_get_budget will increase 'restarts'.
Normally, it will run hw queue when io complete and set 'restarts'
as 0. But if we run queue before adding request to the dispatch list
and blk_mq_dispatch_plug_list also success issue all requests, then
on one will run queue, and the request will be stall in the dispatch
list and cannot complete forever.
It is wrong to use last request of plug list to decide if run queue is
needed since all the remained requests in plug list may be from other
hctxs. To fix the bug, pass run_queue as true always to
blk_mq_request_bypass_insert().
Fix-suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_queue_stopped() doesn't have any caller, which was found by
code coverage test, thus remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220818063555.3741222-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is another spot where we check ->async_data directly instead of
using req_has_async_data(), which is the way to do it, fix it up.
Fixes: 43e0bbbd0b0e3 ("io_uring: add netmsg cache")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/42f33b9a81dd6ae65dda92f0372b0ff82d548517.1660822636.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix possible NULL pointer dereference in mtk_xdp_run() if the
ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails
returning NULL.
Fixes: 5886d26fd25bb ("net: ethernet: mtk_eth_soc: add xmit XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/627a07d759020356b64473e09f0855960e02db28.1660659112.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPsec code relies on valid priv->fs pointer that is the case in NIC
flow, but not correct in uplink. Before commit that mentioned in the
Fixes line, that pointer was valid in all flows as it was allocated
together with priv struct.
In addition, the cleanup representors routine called to that
not-initialized priv->fs pointer and its internals which caused NULL
deference.
So, move FS allocation to be as early as possible.
Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().
It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.
There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).
The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Namhyung Kim
Arnaldo Carvalho de Melo
Ian Rogers
Aaron Lu
Li kunyu
Josh Poimboeuf
Chao Peng
Paolo Bonzini
Sean Christopherson
Conor Dooley
Sergei Antonov
Cong Wang
Lin Ma
Geert Uytterhoeven
Jakub Kicinski
Christophe JAILLET
Jens Wiklander
Yufen Yu
Yu Kuai
Pavel Begunkov
Lorenzo Bianconi
Leon Romanovsky
Vladimir Oltean