aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-21ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supplyDave Gerlach1-0/+4
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7-evm: Add cpu0 vdd supplyDave Gerlach1-1/+1
Add vdd-supply as smps123_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supplyDave Gerlach1-1/+1
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Enable 1.5 GHz operation for the CPUDave Gerlach1-0/+7
After ti-opp-supply driver is in place to provide AVS Class0 and abb regulator scaling support let's enable 1.5GHz for the cpu. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add MPU OPP supply nodeDave Gerlach1-0/+13
Add the OPP supply node for the MPU voltage rail to provide the information needed by the ti-opp-supply driver to enable AVS Class 0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add vbb-supply to cpu and additional voltagesDave Gerlach1-2/+7
Add a vbb-supply phandle to the cpus node and also add an additional triplet of voltages for each OPP in the operating-points-v2 table to make use of the multi regulator support in the OPP core and provide the vbb regulator for use by the ti-opp-supply driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am335x-boneblue: enable canRobert Nelson1-0/+15
BeagleBone Blue: can: enable the dedicated can connector. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am335x-boneblue: enable usartsRobert Nelson1-0/+60
BeagleBone Blue: usarts: enable all the dedicated usart connectors. DSM2/uart4: on the Blue, this is a recieve only interface. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am335x-boneblue: fix wl1835 IRQ pinRobert Nelson1-2/+2
Use the correct IRQ gpio pin on the BeagleBone Blue to allow the wl1835 wireless module to actually work. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Remove deprecated PCI compatible stringKishon Vijay Abraham I1-3/+0
Since SoC specific compatible strings are used for PCIe in dra74x.dtsi and dra72x.dtsi, remove the compatible property from dra7.dtsi which uses the deprecated compatible string. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra76-evm: Enable x2 PCIe lanesKishon Vijay Abraham I1-0/+16
DRA76 EVM has a 4-lane PCIe connector and DRA76 can support x2 lanes. Enable both the PCIe lanes here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: DRA72x: Use PCIe compatible specific to dra72Kishon Vijay Abraham I1-0/+12
Use dra72 specific compatible string for PCIe while preserving the older compatible. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: DRA74x: Use PCIe compatible specific to dra74Kishon Vijay Abraham I2-1/+13
Use dra74 specific compatible string for PCIe while preserving the older compatible. While at that add a new label for the 2nd instance of pcie. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add properties to enable PCIe x2 lane modeKishon Vijay Abraham I1-0/+4
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable PCIe x2 lane mode are added here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am57xx: Add support for am574x-idkLokesh Vutla4-92/+124
am574x-idk is similar to am572x-idk with am574x SoC. So create a common file for both evms and include SoC dtsi as needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supplyDave Gerlach1-0/+4
Hook dcdc2 as the cpu0-supply. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am437x-idk-evm: Disable OPP50 for MPUDave Gerlach1-0/+14
AM437x IDK has a TPS386000 supply voltage supervisor on the VDD_MPU rail set to trigger undervoltage condition at 0.96V. Because of this, OPP50, which is normally configured to 300MHz at 0.95V, must be disabled to avoid triggering the undervoltage condition. Also mark OPP100 as the suspend-opp as it is now our lowest OPP. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: pandora: fix panel compatibility stringH. Nikolaus Schaller1-1/+1
We can remove the unnecessary "omapdss," prefix because the omapdrm driver takes care of it when matching with the driver table. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: gta04: improve panel compatibility stringH. Nikolaus Schaller1-1/+1
Official vendor string is now "tpo" and not "toppoly". Requires patch "omapdrm: panel: fix compatible vendor string for td028ttec1" so that the driver understands both. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: n950: add display supportSebastian Reichel1-0/+88
Add basic panel support for the Nokia N950. It must be tweaked a little bit later, since the panel was built into the device upside-down. Also the first 5 and the last 5 pixels are covered by plastic. Signed-off-By: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: omap4-droid4: improve LCD descriptionSebastian Reichel1-1/+5
This improves LCD support for the Droid 4. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-15ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macroDave Gerlach1-1/+2
Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was mistakenly defined as an active high bit, however setting the bit actually disables the internal pull resistor on the pin, so correct this macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit value set now that the documentation has been updated. Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June 2017 Section 7.2.1. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-15ARM: dts: am43xx-epos-evm: Add phandle for the backlight for the panelPeter Ujfalusi1-1/+3
With the backlight phandle the driver can manage the backlight on/off in sync with the panel enable/disable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-15ARM: dts: am437x-sk-evm: Add phandle for the backlight for the panelPeter Ujfalusi1-1/+3
With the backlight phandle the driver can manage the backlight on/off in sync with the panel enable/disable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-15ARM: dts: am437x-gp-evm: Add phandle for the backlight for the panelPeter Ujfalusi1-1/+3
With the backlight phandle the driver can manage the backlight on/off in sync with the panel enable/disable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-15ARM: dts: am3/am4/dra7/omap: Remove leading 0x and 0s from bindings notationMathieu Malaterre8-23/+23
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: $ find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec \ sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" \ -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkitAdam Ford2-57/+60
The newly added OMAP35xx Torpedo does not have a WiFi option, so this patch moves the WL1283 binding and pin muxing to the logicpd-torpedo-37xx-devkit since it's only applicable on that SOM Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>