aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-06arm64: dts: add all hi6220 uart nodesTyler Baker2-3/+47
This patch adds all UART nodes for the Hi6220 SoC. Recently a board[1] has been developed to standardize UART access across all the 96boards consumer edition boards. To use this hardware on HiKey we must configure and enable UART3. However, to ensure backward compatibility we must keep UART0 enabled as well. I have removed the hard coded clock index values in favor of using the ones already defined in include/dt-bindings/clock/hi6220-clock.h. Since UART0 needs to be soldered, it has been suggested to use the UART3 as the default console. This patch was boot tested on top of next-20150930, with both UART configurations. [1] http://www.seeedstudio.com/depot/96Boards-UART-p-2525.html?ref=newInBazaar Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-06arm64: dts: Add base stratix 10 dtsiDinh Nguyen6-0/+409
Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node
2015-10-06ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDKDinh Nguyen1-0/+27
On the Arria10 Devkit, the I2C bus has a serial EEPROM and an RTC hanging off it. Also, enable the USB node. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-10-06ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10Dinh Nguyen1-0/+8
Add the required clock fields for all the I2C nodes. Also add missing clock fields for UART0 and USB1. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-10-06ARM: shmobile: porter: add Ether DT supportSergei Shtylyov1-1/+27
Define the Porter board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. This patch is analogous to the commit 26b0d2cf73cb ("ARM: shmobile: henninger: add Ether DT support") as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-05ARM: shmobile: fix SILK board nameSergei Shtylyov1-2/+2
Unfortunately, the SILK board bindings were not quite correct, as the board name should be all caps. Fix that, adding the board model # in parens and removing stray semicolon. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-05ARM: shmobile: r8a7794: add HS-USB DT supportSergei Shtylyov1-0/+12
Define the R8A7794 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-04Linux 4.3-rc4Linus Torvalds1-1/+1
2015-10-04MIPS: scall: Always run the seccomp syscall filtersMarkos Chandras4-73/+42
The MIPS syscall handler code used to return -ENOSYS on invalid syscalls. Whilst this is expected, it caused problems for seccomp filters because the said filters never had the change to run since the code returned -ENOSYS before triggering them. This caused problems on the chromium testsuite for filters looking for invalid syscalls. This has now changed and the seccomp filters are always run even if the syscall is invalid. We return -ENOSYS once we return from the seccomp filters. Moreover, similar codepaths have been merged in the process which simplifies somewhat the overall syscall code. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02clocksource: Fix abs() usage w/ 64bit valuesJohn Stultz1-1/+1
This patch fixes one cases where abs() was being used with 64-bit nanosecond values, where the result may be capped at 32-bits. This potentially could cause watchdog false negatives on 32-bit systems, so this patch addresses the issue by using abs64(). Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1442279124-7309-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02irqchip/gic-v3-its: Count additional LPIs for the aliased devicesMarc Zyngier1-1/+1
When configuring the interrupt mapping for a new device, we iterate over all the possible aliases to account for their maximum MSI allocation. This was introduced by e8137f4f5088 ("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration"). Turns out that the code doing that is a bit braindead, and repeatedly accounts for the same device over and over. Fix this by counting the actual alias that is passed to us by the core code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlinedMarc Zyngier1-0/+3
More agressive inlining in recent versions of GCC have uncovered a new set of warnings: drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare: drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.lpi_base = lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here int lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.nr_lpis = nr_lpis; ^ drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here int nr_lpis; ^ The warning is fairly benign (there is no code path that could actually use uninitialized variables), but let's silence it anyway by zeroing the variables on the error path. Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02Revert "Input: synaptics - fix handling of disabling gesture mode"Dmitry Torokhov1-8/+4
This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we actually do want the device to work in extended W mode, as this is the mode that allows us receiving multiple contact information. Cc: stable@vger.kernel.org
2015-10-02MIPS: Octeon: Fix kernel panic on startup from memory corruptionMatt Bennett1-1/+1
During development it was found that a number of builds would panic during the kernel init process, more specifically in 'delayed_fput()'. The panic showed the kernel trying to access a memory address of '0xb7fdc00' while traversing the 'delayed_fput_list' structure. Comparing this memory address to the value of the pointer used on builds that did not panic confirmed that the pointer on crashing builds must have been corrupted at some stage earlier in the init process. By traversing the list earlier and earlier in the code it was found that 'plat_mem_setup()' was responsible for corrupting the list. Specifically the line: memory = cvmx_bootmem_phy_alloc(mem_alloc_size, __pa_symbol(&__init_end), -1, 0x100000, CVMX_BOOTMEM_FLAG_NO_LOCKING); Which would eventually call: cvmx_bootmem_phy_set_size(new_ent_addr, cvmx_bootmem_phy_get_size (ent_addr) - (desired_min_addr - ent_addr)); Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list') and the second argument (size)=0xb7fdc00 (the address causing the kernel panic). The job of this part of 'plat_mem_setup()' is to allocate chunks of memory for the kernel to use. At the start of each chunk of memory the size of the chunk is written, hence the value 0xb7fdc00 is written onto memory at 0x4800000, therefore the kernel panics when it goes back to access 'delayed_fput_list' later on in the initialisation process. On builds that were not crashing it was found that the compiler had placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted (but something else in memory was overwritten). As can be seen in the first function call above the code begins to allocate chunks of memory beginning from the symbol '__init_end'. The MIPS linker script (vmlinux.lds.S) however defines the .bss section to begin after '__init_end'. Therefore memory within the .bss section is allocated to the kernel to use (System.map shows 'delayed_fput_list' and other kernel structures to be in .bss). To stop the kernel panic (and the .bss section being corrupted) memory should begin being allocated from the symbol '_end'. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: aleksey.makarov@auriga.com Patchwork: https://patchwork.linux-mips.org/patch/11251/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02MIPS: Fix R2300 FP context switch handlingPaul Burton1-27/+1
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Remove it from the r2300_switch.S implementation too in order to prevent attempting to save the FP context twice, which would likely lead to an exception from the second save because the FPU had already been disabled by the first save. This patch has only been build tested, using rbtx49xx_defconfig. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/11167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02MIPS: Fix octeon FP context switch handlingPaul Burton1-25/+1
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Octeon uses its own implementation in octeon_switch.S, so remove FP context saving there too in order to prevent attempting to save context twice. That formerly led to an exception from the second save as follows because the FPU had already been disabled by the first save: do_cpu invoked from kernel context![#1]: CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.3.0-rc2-dirty #2 task: 800000041f84a008 ti: 800000041f864000 task.ti: 800000041f864000 $ 0 : 0000000000000000 0000000010008ce1 0000000000100000 ffffffffbfffffff $ 4 : 800000041f84a008 800000041f84ac08 800000041f84c000 0000000000000004 $ 8 : 0000000000000001 0000000000000000 0000000000000000 0000000000000001 $12 : 0000000010008ce3 0000000000119c60 0000000000000036 800000041f864000 $16 : 800000041f84ac08 800000000792ce80 800000041f84a008 ffffffff81758b00 $20 : 0000000000000000 ffffffff8175ae50 0000000000000000 ffffffff8176c740 $24 : 0000000000000006 ffffffff81170300 $28 : 800000041f864000 800000041f867d90 0000000000000000 ffffffff815f3fa0 Hi : 0000000000fa8257 Lo : ffffffffe15cfc00 epc : ffffffff8112821c resume+0x9c/0x200 ra : ffffffff815f3fa0 __schedule+0x3f0/0x7d8 Status: 10008ce2 KX SX UX KERNEL EXL Cause : 1080002c (ExcCode 0b) PrId : 000d0601 (Cavium Octeon+) Modules linked in: Process kthreadd (pid: 2, threadinfo=800000041f864000, task=800000041f84a008, tls=0000000000000000) Stack : ffffffff81604218 ffffffff815f7e08 800000041f84a008 ffffffff811681b0 800000041f84a008 ffffffff817e9878 0000000000000000 ffffffff81770000 ffffffff81768340 ffffffff81161398 0000000000000001 0000000000000000 0000000000000000 ffffffff815f4424 0000000000000000 ffffffff81161d68 ffffffff81161be8 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff8111e16c 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff8112821c>] resume+0x9c/0x200 [<ffffffff815f3fa0>] __schedule+0x3f0/0x7d8 [<ffffffff815f4424>] schedule+0x34/0x98 [<ffffffff81161d68>] kthreadd+0x180/0x198 [<ffffffff8111e16c>] ret_from_kernel_thread+0x14/0x1c Tested using cavium_octeon_defconfig on an EdgeRouter Lite. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-kernel@vger.kernel.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/11166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02arm64: ftrace: fix function_graph tracer panicLi Bin1-2/+20
When function graph tracer is enabled, the following operation will trigger panic: mount -t debugfs nodev /sys/kernel echo next_tgid > /sys/kernel/tracing/set_ftrace_filter echo function_graph > /sys/kernel/tracing/current_tracer ls /proc/ ------------[ cut here ]------------ [ 198.501417] Unable to handle kernel paging request at virtual address cb88537fdc8ba316 [ 198.506126] pgd = ffffffc008f79000 [ 198.509363] [cb88537fdc8ba316] *pgd=00000000488c6003, *pud=00000000488c6003, *pmd=0000000000000000 [ 198.517726] Internal error: Oops: 94000005 [#1] SMP [ 198.518798] Modules linked in: [ 198.520582] CPU: 1 PID: 1388 Comm: ls Tainted: G [ 198.521800] Hardware name: linux,dummy-virt (DT) [ 198.522852] task: ffffffc0fa9e8000 ti: ffffffc0f9ab0000 task.ti: ffffffc0f9ab0000 [ 198.524306] PC is at next_tgid+0x30/0x100 [ 198.525205] LR is at return_to_handler+0x0/0x20 [ 198.526090] pc : [<ffffffc0002a1070>] lr : [<ffffffc0000907c0>] pstate: 60000145 [ 198.527392] sp : ffffffc0f9ab3d40 [ 198.528084] x29: ffffffc0f9ab3d40 x28: ffffffc0f9ab0000 [ 198.529406] x27: ffffffc000d6a000 x26: ffffffc000b786e8 [ 198.530659] x25: ffffffc0002a1900 x24: ffffffc0faf16c00 [ 198.531942] x23: ffffffc0f9ab3ea0 x22: 0000000000000002 [ 198.533202] x21: ffffffc000d85050 x20: 0000000000000002 [ 198.534446] x19: 0000000000000002 x18: 0000000000000000 [ 198.535719] x17: 000000000049fa08 x16: ffffffc000242efc [ 198.537030] x15: 0000007fa472b54c x14: ffffffffff000000 [ 198.538347] x13: ffffffc0fada84a0 x12: 0000000000000001 [ 198.539634] x11: ffffffc0f9ab3d70 x10: ffffffc0f9ab3d70 [ 198.540915] x9 : ffffffc0000907c0 x8 : ffffffc0f9ab3d40 [ 198.542215] x7 : 0000002e330f08f0 x6 : 0000000000000015 [ 198.543508] x5 : 0000000000000f08 x4 : ffffffc0f9835ec0 [ 198.544792] x3 : cb88537fdc8ba316 x2 : cb88537fdc8ba306 [ 198.546108] x1 : 0000000000000002 x0 : ffffffc000d85050 [ 198.547432] [ 198.547920] Process ls (pid: 1388, stack limit = 0xffffffc0f9ab0020) [ 198.549170] Stack: (0xffffffc0f9ab3d40 to 0xffffffc0f9ab4000) [ 198.582568] Call trace: [ 198.583313] [<ffffffc0002a1070>] next_tgid+0x30/0x100 [ 198.584359] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.585503] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.586574] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.587660] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.588896] Code: aa0003f5 2a0103f4 b4000102 91004043 (885f7c60) [ 198.591092] ---[ end trace 6a346f8f20949ac8 ]--- This is because when using function graph tracer, if the traced function return value is in multi regs ([x0-x7]), return_to_handler may corrupt them. So in return_to_handler, the parameter regs should be protected properly. Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Li Bin <huawei.libin@huawei.com> Acked-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-02MIPS: BPF: Fix load delay slots.Ralf Baechle1-0/+4
The entire bpf_jit_asm.S is written in noreorder mode because "we know better" according to a comment. This also prevented the assembler from throwing in the required NOPs for MIPS I processors which have no load-use interlock, thus the load's consumer might end up using the old value of the register from prior to the load. Fixed by putting the assembler in reorder mode for just the affected load instructions. This is not enough for gas to actually try to be clever by looking at the next instruction and inserting a nop only when needed but as the comment said "we know better", so getting gas to unconditionally emit a NOP is just right in this case and prevents adding further ifdefery. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02x86/headers/uapi: Fix __BITS_PER_LONG value for x32 buildsBen Hutchings1-1/+1
On x32, gcc predefines __x86_64__ but long is only 32-bit. Use __ILP32__ to distinguish x32. Fixes this compiler error in perf: tools/include/asm-generic/bitops/__ffs.h: In function '__ffs': tools/include/asm-generic/bitops/__ffs.h:19:8: error: right shift count >= width of type [-Werror=shift-count-overflow] word >>= 32; ^ This isn't sufficient to build perf for x32, though. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443660043.2730.15.camel@decadent.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-02md/bitmap: don't pass -1 to bitmap_storage_alloc.NeilBrown1-1/+2
Passing -1 to bitmap_storage_alloc() causes page->index to be set to -1, which is quite problematic. So only pass ->cluster_slot if mddev_is_clustered(). Fixes: b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid1: Avoid raid1 resync getting stuckJes Sorensen1-3/+2
close_sync() needs to set conf->next_resync to a large, but safe value below MaxSector and use it to determine whether or not to set start_next_window in wait_barrier() Solution suggested by Neil Brown. Reported-by: Nate Dailey <nate.dailey@stratus.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: drop null test before destroy functionsJulia Lawall4-14/+7
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: clear CHANGE_PENDING in readonly arrayShaohua Li1-0/+1
If faulty disks of an array are more than allowed degraded number, the array enters error handling. It will be marked as read-only with MD_CHANGE_PENDING/RECOVERY_NEEDED set. But currently recovery doesn't clear CHANGE_PENDING bit for read-only array. If MD_CHANGE_PENDING is set for a raid5 array, all returned IO will be hold on a list till the bit is clear. But recovery nevery clears this bit, the IO is always in pending state and nevery finish. This has bad effects like upper layer can't get an IO error and the array can't be stopped. Fixes: c3cce6cda162 ("md/raid5: ensure device failure recorded before write request returns.") Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid0: apply base queue limits *before* disk_stack_limitsNeilBrown1-6/+6
Calling e.g. blk_queue_max_hw_sectors() after calls to disk_stack_limits() discards the settings determined by disk_stack_limits(). So we need to make those calls first. Fixes: 199dc6ed5179 ("md/raid0: update queue parameter in a safer location.") Cc: stable@vger.kernel.org (v2.6.35+ - please apply with 199dc6ed5179). Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid5: don't index beyond end of array in need_this_block().NeilBrown1-2/+2
When need_this_block probably shouldn't be called when there are more than 2 failed devices, we really don't want it to try indexing beyond the end of the failed_num[] of fdev[] arrays. So limit the loops to at most 2 iterations. Reported-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-10-02raid5: update analysis state for failed stripeShaohua Li1-0/+4
handle_failed_stripe() makes the stripe fail, eg, all IO will return with a failure, but it doesn't update stripe_head_state. Later handle_stripe() has special handling for raid6 for handle_stripe_fill(). That check before handle_stripe_fill() doesn't skip the failed stripe and we get a kernel crash in need_this_block. This patch clear the analysis state to make sure no functions wrongly called after handle_failed_stripe() Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: wait for pending superblock updates before switching to read-onlyNeilBrown1-0/+4
If a superblock update is pending, wait for it to complete before letting md_set_readonly() switch to readonly. Otherwise we might lose important information about a device having failed. For external arrays, waiting for superblock updates can wait on user-space, so in that case, just return an error. Reported-and-tested-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02x86/mm: Set NX on gap between __ex_table and rodataStephen Smalley1-1/+1
Unused space between the end of __ex_table and the start of rodata can be left W+x in the kernel page tables. Extend the setting of the NX bit to cover this gap by starting from text_end rather than rodata_start. Before: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB x pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd After: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB NX pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.gov Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-02x86/kexec: Fix kexec crash in syscall kexec_file_load()Lee, Chun-Yi1-4/+3
The original bug is a page fault crash that sometimes happens on big machines when preparing ELF headers: BUG: unable to handle kernel paging request at ffffc90613fc9000 IP: [<ffffffff8103d645>] prepare_elf64_ram_headers_callback+0x165/0x260 The bug is caused by us under-counting the number of memory ranges and subsequently not allocating enough ELF header space for them. The bug is typically masked on smaller systems, because the ELF header allocation is rounded up to the next page. This patch modifies the code in fill_up_crash_elf_data() by using walk_system_ram_res() instead of walk_system_ram_range() to correctly count the max number of crash memory ranges. That's because the walk_system_ram_range() filters out small memory regions that reside in the same page, but walk_system_ram_res() does not. Here's how I found the bug: After tracing prepare_elf64_headers() and prepare_elf64_ram_headers_callback(), the code uses walk_system_ram_res() to fill-in crash memory regions information to the program header, so it counts those small memory regions that reside in a page area. But, when the kernel was using walk_system_ram_range() in fill_up_crash_elf_data() to count the number of crash memory regions, it filters out small regions. I printed those small memory regions, for example: kexec: Get nr_ram ranges. vaddr=0xffff880077592258 paddr=0x77592258, sz=0xdc0 Based on the code in walk_system_ram_range(), this memory region will be filtered out: pfn = (0x77592258 + 0x1000 - 1) >> 12 = 0x77593 end_pfn = (0x77592258 + 0xfc0 -1 + 1) >> 12 = 0x77593 end_pfn - pfn = 0x77593 - 0x77593 = 0 <=== if (end_pfn > pfn) is FALSE So, the max_nr_ranges that's counted by the kernel doesn't include small memory regions - causing us to under-allocate the required space. That causes the page fault crash that happens in a later code path when preparing ELF headers. This bug is not easy to reproduce on small machines that have few CPUs, because the allocated page aligned ELF buffer has more free space to cover those small memory regions' PT_LOAD headers. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1443531537-29436-1-git-send-email-jlee@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>