aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-01-26ARM: dts: omap3-gta04: only power DSS when necessary.NeilBrown1-5/+1
i.e. configure vpll2 as a supply for the dss rather than being always-on. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: add gyroscopeNeilBrown1-0/+8
Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: enable power-off for wifi card.NeilBrown1-0/+1
Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: add comments about gpiosNeilBrown1-3/+3
Add comments to state which GPIO is used for some interrupts. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Add ramp value for twl4030 audioMarek Belisko1-0/+1
Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable power-off using twl4030H. Nikolaus Schaller1-0/+5
Enabled poweroff through PMIC on GTA04. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix a GPIO line for bma180 nodeMarek Belisko1-1/+1
GPIO_115 used as irq is in &gpio4, not &gpio3. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable twl audio vibra supportH. Nikolaus Schaller1-0/+1
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable mcbps2 necessary for audioH. Nikolaus Schaller1-0/+4
mcbsp2 is used in gta04 soundcard config and by default is disabled so enable it for gta04. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix audio node malformattingH. Nikolaus Schaller1-4/+4
Audio should be child of twl node. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix backup-battery charging in devicetree file.H. Nikolaus Schaller1-2/+2
Fix attribute names. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-20ARM: dts: dra72-evm: Add qspi deviceMugunthan V N1-0/+77
These add device tree entry for qspi device on dra72-evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-19ARM: dts: Add minimal support for dm8168-evmTony Lindgren3-0/+131
This allows booting the device with basic functionality. Note that at least on my revision c board the DDR3 does not seem to work properly and only some of the memory can be reliably used. Also, the mainline u-boot does not seem to properly initialize the ethernet, so I've been using the old TI u-boot at: http://arago-project.org/git/projects/?p=u-boot-omap3.git;a=summary Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-19ARM: dts: Add basic clocks for dm816xTony Lindgren2-0/+251
The clocks on dm816x are a bit different from the other omap variants. The clocks are sourced from a FAPLL (Flying Adder PLL) unlike on other omaps. Other than that, it's a similar setup to am33xx with extra muxes and dividers that can be defined as existing component clocks. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>