| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
One of the entries has three fields "mistake||correction||correction"
rather than the expected two fields "mistake||correction". Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memalloc_nocma_{save/restore} APIs can be used to skip page allocation
on CMA area, but, there is a missing case and the page on CMA area could
be allocated even if APIs are used. This patch handles this case to fix
the potential issue.
For now, these APIs are used to prevent long-term pinning on the CMA
page. When the long-term pinning is requested on the CMA page, it is
migrated to the non-CMA page before pinning. This non-CMA page is
allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't
work as intended, the CMA page is allocated and it is pinned for a long
time. This long-term pin for the CMA page causes cma_alloc() failure
and it could result in wrong behaviour on the device driver who uses the
cma_alloc().
Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist
could have the pages on CMA area so we need to skip it if ALLOC_CMA
isn't specified.
Fixes: 8510e69c8efe (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The routine that applies debug flags to the kmem_cache slabs
inadvertantly prevents non-debug flags from being applied to those
same objects. That is, if slub_debug=<flag>,<slab> is specified,
non-debugged slabs will end up having flags of zero, and the slabs
may be unusable.
Fix this by including the input flags for non-matching slabs with the
contents of slub_debug, so that the caches are created as expected
alongside any debugging options that may be requested. With this, we
can remove the check for a NULL slub_debug_string, since it's covered
by the loop itself.
Fixes: e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e62 ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes: 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages. It happens in __mod_node_page_state().
However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion. It leads to incorrect (unrealistically high) slab
counters values. Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes: ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lock(&iommu->lock) without disabling irq causes lockdep warnings.
[ 12.703950] ========================================================
[ 12.703962] WARNING: possible irq lock inversion dependency detected
[ 12.703975] 5.9.0-rc6+ #659 Not tainted
[ 12.703983] --------------------------------------------------------
[ 12.703995] systemd-udevd/284 just changed the state of lock:
[ 12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.57+0x2e/0x90
[ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 12.704043] (&iommu->lock){+.+.}-{2:2}
[ 12.704045]
and interrupts could create inverse lock ordering between
them.
[ 12.704073]
other info that might help us debug this:
[ 12.704085] Possible interrupt unsafe locking scenario:
[ 12.704097] CPU0 CPU1
[ 12.704106] ---- ----
[ 12.704115] lock(&iommu->lock);
[ 12.704123] local_irq_disable();
[ 12.704134] lock(device_domain_lock);
[ 12.704146] lock(&iommu->lock);
[ 12.704158] <Interrupt>
[ 12.704164] lock(device_domain_lock);
[ 12.704174]
*** DEADLOCK ***
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Xen is using the chip_data pointer for storing IRQ specific data. When
running as a HVM domain this can result in problems for legacy IRQs, as
those might use chip_data for their own purposes.
Use a local array for this purpose in case of legacy IRQs, avoiding the
double use.
Cc: stable@vger.kernel.org
Fixes: c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit 387caf0b759a ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes: a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When driver has been converted to the bitmap API the non-bitmap functions
started behaving differently on 32-bit BE architectures since the bytes in
two consequent unsigned longs are in different order in comparison to byte
array. Hence if the chip had had more than 32 lines the memset() call over
it would have not set up upper lines correctly.
Although it's currently a theoretical case (no supported chips of this type
has 32+ lines), it's better to provide a clean code to avoid people thinking
this is okay and potentially producing not fully working things.
Fixes: 35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In IRQ handler we have to clear bitmap before use. Currently
the GCC extension has been used for that. For sake of the consistency
switch to bitmap API. As expected bloat-o-meter shows no difference
in the object size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
check mtk_is_virt_gpio input parameter,
virtual gpio need to support eint mode.
add error handler for the ko case
to fix this boot fail:
pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2]
lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris]
Fixes: edd546465002 ("pinctrl: mediatek: avoid virtual gpio trying to set reg")
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Singed-off-by: Jie Yang <sin_jieyang@mediatek.com>
Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Correct sdc2_clk pin definition (register offset is wrong, verified by
the msm-4.19 driver).
Fixes: 4e3ec9e407ad ("pinctrl: qcom: Add sm8250 pinctrl driver.")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200914091846.55204-1-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Link: https://lore.kernel.org/r/20200925092115.16546-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzzoni <thomas.petazzoni@bootlin.com>
|
|
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6
because clint_time_val is used even before CLINT driver is probed
at following places:
1. rand_initialize() calls get_cycles() which in-turn uses
clint_time_val
2. boot_init_stack_canary() calls get_cycles() which in-turn
uses clint_time_val
The issue#1 (above) is fixed by providing custom random_get_entropy()
for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of
boot_init_stack_canary() on get_cycles() and this is aligned with the
boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel.
Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.
This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.
This is trivial to reproduce and the following script triggers the bug:
$ cat reproducer.sh
#!/bin/bash
DEV1="/dev/sdg"
DEV2="/dev/sdh"
DEV3="/dev/sdi"
wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null
# Create a raid1 test fs on 2 devices.
mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
mount $DEV1 /mnt/btrfs
xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo
echo "Starting to replace $DEV1 with $DEV3"
btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
echo
echo "Running fstrim"
fstrim /mnt/btrfs
echo
echo "Unmounting filesystem"
umount /mnt/btrfs
echo "Mounting filesystem in degraded mode using $DEV3 only"
wipefs -a $DEV1 $DEV2 &> /dev/null
mount -o degraded $DEV3 /mnt/btrfs
if [ $? -ne 0 ]; then
dmesg | tail
echo
echo "Failed to mount in degraded mode"
exit 1
fi
echo
echo "File foo data (expected all bytes = 0xab):"
od -A d -t x1 /mnt/btrfs/foo
umount /mnt/btrfs
When running the reproducer:
$ ./replace-test.sh
wrote 10485760/10485760 bytes at offset 0
10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
Starting to replace /dev/sdg with /dev/sdi
Running fstrim
Unmounting filesystem
Mounting filesystem in degraded mode using /dev/sdi only
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
[19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
[19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
[19582.208293] BTRFS info (device sdi): allowing degraded mounts
[19582.208298] BTRFS info (device sdi): disk space caching is enabled
[19582.208301] BTRFS info (device sdi): has skinny extents
[19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing
[19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
[19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0
[19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
[19582.231576] BTRFS error (device sdi): open_ctree failed
Failed to mount in degraded mode
So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.
A test case for fstests follows soon.
Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex. As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock. Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.
There's a report from syzbot probably hitting one of the cases where
the bd_mutex and device_list_mutex are taken in the wrong order, however
it's not with device replace, like this patch fixes. As there's no
reproducer available so far, we can't verify the fix.
https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/
dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419
WARNING: possible circular locking dependency detected
5.9.0-rc5-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.0/6878 is trying to acquire lock:
ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804
but task is already holding lock:
ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255
btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109
__btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916
find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline]
find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #3 (sb_internal#2){.+.+}-{0:0}:
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x234/0x470 fs/super.c:1672
sb_start_intwrite include/linux/fs.h:1690 [inline]
start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624
find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline]
find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
__flush_work+0x60e/0xac0 kernel/workqueue.c:3041
wb_shutdown+0x180/0x220 mm/backing-dev.c:355
bdi_unregister+0x174/0x590 mm/backing-dev.c:872
del_gendisk+0x820/0xa10 block/genhd.c:933
loop_remove drivers/block/loop.c:2192 [inline]
loop_control_ioctl drivers/block/loop.c:2291 [inline]
loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (loop_ctl_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
lo_open+0x19/0xd0 drivers/block/loop.c:1893
__blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507
blkdev_get fs/block_dev.c:1639 [inline]
blkdev_open+0x227/0x300 fs/block_dev.c:1753
do_dentry_open+0x4b9/0x11b0 fs/open.c:817
do_open fs/namei.c:3251 [inline]
path_openat+0x1b9a/0x2730 fs/namei.c:3368
do_filp_open+0x17e/0x3c0 fs/namei.c:3395
do_sys_openat2+0x16d/0x420 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_sys_open fs/open.c:1192 [inline]
__se_sys_open fs/open.c:1188 [inline]
__x64_sys_open+0x119/0x1c0 fs/open.c:1188
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&bdev->bd_mutex){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_devs->device_list_mutex);
lock(sb_internal#2);
lock(&fs_devs->device_list_mutex);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
3 locks held by syz-executor.0/6878:
#0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365
#1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178
#2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
stack backtrace:
CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x460027
RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027
RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0
RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b
R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460
R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add syzbot reference ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.
[6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)
To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.
This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix missing return statement when writing "off" to intel_pstate status
sysfs I/F.
Fixes: 55671ea3257a ("cpufreq: intel_pstate: Free memory only when turning off")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113ea ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clint_time_val will soon be used by the RISC-V implementation of
random_get_entropy(), which is a static inline function that may be used by
modules (at least CRYPTO_JITTERENTROPY=m).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>
|
|
The kernel may fail to boot or devices may fail to come up when
initializing iscsi_tcp devices starting with Linux 5.8.
Commit a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param
libiscsi function") introduced getpeername() within the session spinlock.
Commit 1b66d253610c ("bpf: Add get{peer, sock}name attach types for
sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(),
which acquires a mutex and when used from iscsi_tcp devices can now lead to
"BUG: scheduling while atomic:" and subsequent damage.
Ensure that the spinlock is released before calling getpeername() or
getsockname(). sock_hold() and sock_put() are used to ensure that the
socket reference is preserved until after the getpeername() or
getsockname() complete.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345
Link: https://lkml.org/lkml/2020/7/28/1085
Link: https://lkml.org/lkml/2020/8/31/459
Link: https://lore.kernel.org/r/20200928043329.606781-1-mark.mielke@gmail.com
Fixes: a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function")
Fixes: 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr")
Cc: stable@vger.kernel.org
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
autofs got broken in some configurations by commit 13c164b1a186
("autofs: switch to kernel_write") because there is now an extra LSM
permission check done by security_file_permission() in rw_verify_area().
autofs is one if the few places that really does want the much more
limited __kernel_write(), because the write is an internal kernel one
that shouldn't do any user permission checks (it also doesn't need the
file_start_write/file_end_write logic, since it's just a pipe).
There are a couple of other cases like that - accounting, core dumping,
and splice - but autofs stands out because it can be built as a module.
As a result, we need to export this internal __kernel_write() function
again.
We really don't want any other module to use this, but we don't have a
"EXPORT_SYMBOL_FOR_AUTOFS_ONLY()". But we can mark it GPL-only to at
least approximate that "internal use only" for licensing.
While in this area, make autofs pass in NULL for the file position
pointer, since it's always a pipe, and we now use a NULL file pointer
for streaming file descriptors (see file_ppos() and commit 438ab720c675:
"vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files")
This effectively reverts commits 9db977522449 ("fs: unexport
__kernel_write") and 13c164b1a186 ("autofs: switch to kernel_write").
Fixes: 13c164b1a186 ("autofs: switch to kernel_write")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 78fe9f63947a2b ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f63947a2b (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b02a3 ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes: c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The temp buffer size variable for trace_find_next_entry() was incorrectly
being updated when the size did not change. The temp buffer size should only
be updated when it is reallocated.
This is mostly an issue when used with ftrace_dump(). That's because
ftrace_dump() can not allocate a new buffer, and instead uses a temporary
buffer with a fix size. But the variable that keeps track of that size is
incorrectly updated with each call, and it could fall into the path that
would try to reallocate the buffer and produce a warning.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548
trace_find_next_entry+0xd0/0xe0
Modules linked in [..]
CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
RIP: 0010:trace_find_next_entry+0xd0/0xe0
Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54
21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb
b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21
RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046
RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0
RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000
RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98
R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301
FS: 00007f8565484740(0000) GS:ffff95a55aa40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0
Call Trace:
trace_print_lat_context+0x58/0x2d0
? cpumask_next+0x16/0x20
print_trace_line+0x1a4/0x4f0
ftrace_dump.cold+0xad/0x12c
__handle_sysrq.cold+0x51/0x126
write_sysrq_trigger+0x3f/0x4a
proc_reg_write+0x53/0x80
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8565579487
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa
64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff
77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487
RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001
RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001
R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002
R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700
irq event stamp: 109958
---[ end trace 7aab5b7e51484b00 ]---
Not only fix the updating of the temp buffer, but also do not free the temp
buffer before a new buffer is allocated (there's no reason to not continue
to use the current temp buffer if an allocation fails).
Cc: stable@vger.kernel.org
Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Blk-mq should call commit_rqs once 'bd.last != true' and no more
request will come(so virtscsi can kick the virtqueue, e.g.). We already
do that in 'blk_mq_dispatch_rq_list/blk_mq_try_issue_list_directly' while
list not empty and 'queued > 0'. However, we can seen the same scene
once the last request in list call queue_rq and return error like
BLK_STS_IOERR which will not requeue the request, and lead that list
empty but need call commit_rqs too(Or the request for virtscsi will stay
timeout until other request kick virtqueue).
We found this problem by do fsstress test with offline/online virtscsi
device repeat quickly.
Fixes: d666ba98f849 ("blk-mq: add mq_ops->commit_rqs()")
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The async buffered reads feature is not working when readahead is
turned off. There are two things to concern:
- when doing retry in io_read, not only the IOCB_WAITQ flag but also
the IOCB_NOWAIT flag is still set, which makes it goes to would_block
phase in generic_file_buffered_read() and then return -EAGAIN. After
that, the io-wq thread work is queued, and later doing the async
reads in the old way.
- even if we remove IOCB_NOWAIT when doing retry, the feature is still
not running properly, since in generic_file_buffered_read() it goes to
lock_page_killable() after calling mapping->a_ops->readpage() to do
IO, and thus causing process to sleep.
Fixes: 1a0a7853b901 ("mm: support async buffered reads in generic_file_buffered_read()")
Fixes: 3b2a4439e0ae ("io_uring: get rid of kiocb_wait_page_queue_init()")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Touchpad on this laptop is not detected properly during boot, as PNP
enumerates (wrongly) AUX port as disabled on this machine.
Fix that by adding this board (with admittedly quite funny DMI
identifiers) to nopnp quirk list.
Reported-by: Andrés Barrantes Silman <andresbs2000@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid.
Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs")
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Tested-by: Harry Cutts <hcutts@chromium.org>
Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It seems likely this block was pasted from internal_get_user_pages_fast,
which is not passed an mm struct and therefore uses current's. But
__get_user_pages_locked is passed an explicit mm, and current->mm is not
always valid. This was hit when being called from i915, which uses:
pin_user_pages_remote->
__get_user_pages_remote->
__gup_longterm_locked->
__get_user_pages_locked
Before, this would lead to an OOPS:
BUG: kernel NULL pointer dereference, address: 0000000000000064
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S U O 5.9.0-rc7+ #140
Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020
Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915]
RIP: 0010:__get_user_pages_remote+0xd7/0x310
Call Trace:
__i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915]
process_one_work+0x1ca/0x390
worker_thread+0x48/0x3c0
kthread+0x114/0x130
ret_from_fork+0x1f/0x30
CR2: 0000000000000064
This commit fixes the problem by using the mm pointer passed to the
function rather than the bogus one in current.
Fixes: 008cfe4418b3 ("mm: Introduce mm_struct.has_pinned")
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot reports a potential lock deadlock between the normal IO path and
->show_fdinfo():
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc6-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.2/19710 is trying to acquire lock:
ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296
but task is already holding lock:
ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ctx->uring_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
__io_uring_show_fdinfo fs/io_uring.c:8417 [inline]
io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460
seq_show+0x4a8/0x700 fs/proc/fd.c:65
seq_read+0x432/0x1070 fs/seq_file.c:208
do_loop_readv_writev fs/read_write.c:734 [inline]
do_loop_readv_writev fs/read_write.c:721 [inline]
do_iter_read+0x48e/0x6e0 fs/read_write.c:955
vfs_readv+0xe5/0x150 fs/read_write.c:1073
kernel_readv fs/splice.c:355 [inline]
default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412
do_splice_to+0x137/0x170 fs/splice.c:871
splice_direct_to_actor+0x307/0x980 fs/splice.c:950
do_splice_direct+0x1b3/0x280 fs/splice.c:1059
do_sendfile+0x55f/0xd40 fs/read_write.c:1540
__do_sys_sendfile64 fs/read_write.c:1601 [inline]
__se_sys_sendfile64 fs/read_write.c:1587 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&p->lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
seq_read+0x61/0x1070 fs/seq_file.c:155
pde_read fs/proc/inode.c:306 [inline]
proc_reg_read+0x221/0x300 fs/proc/inode.c:318
do_loop_readv_writev fs/read_write.c:734 [inline]
do_loop_readv_writev fs/read_write.c:721 [inline]
do_iter_read+0x48e/0x6e0 fs/read_write.c:955
vfs_readv+0xe5/0x150 fs/read_write.c:1073
kernel_readv fs/splice.c:355 [inline]
default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412
do_splice_to+0x137/0x170 fs/splice.c:871
splice_direct_to_actor+0x307/0x980 fs/splice.c:950
do_splice_direct+0x1b3/0x280 fs/splice.c:1059
do_sendfile+0x55f/0xd40 fs/read_write.c:1540
__do_sys_sendfile64 fs/read_write.c:1601 [inline]
__se_sys_sendfile64 fs/read_write.c:1587 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (sb_writers#4){.+.+}-{0:0}:
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441
lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x228/0x450 fs/super.c:1672
io_write+0x6b5/0xb30 fs/io_uring.c:3296
io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719
__io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175
io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254
io_submit_sqe fs/io_uring.c:6324 [inline]
io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521
__do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
sb_writers#4 --> &p->lock --> &ctx->uring_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctx->uring_lock);
lock(&p->lock);
lock(&ctx->uring_lock);
lock(sb_writers#4);
*** DEADLOCK ***
1 lock held by syz-executor.2/19710:
#0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348
stack backtrace:
CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441
lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x228/0x450 fs/super.c:1672
io_write+0x6b5/0xb30 fs/io_uring.c:3296
io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719
__io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175
io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254
io_submit_sqe fs/io_uring.c:6324 [inline]
io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521
__do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45e179
Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004
RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c
R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c
Fix this by just not diving into details if we fail to trylock the
io_uring mutex. We know the ctx isn't going away during this operation,
but we cannot safely iterate buffers/files/personalities if we don't
hold the io_uring mutex.
Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports a crash with tty polling, which is using the double poll
handling:
general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline]
RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845
Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00
RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004
RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048
RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60
R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004
R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004
FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__wake_up_common+0x147/0x650 kernel/sched/wait.c:93
__wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123
tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735
__tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625
__tty_hangup drivers/tty/tty_io.c:575 [inline]
tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698
pty_close+0x3f5/0x550 drivers/tty/pty.c:79
tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679
__fput+0x285/0x920 fs/file_table.c:281
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:165 [inline]
exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192
syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x401210
which is due to a failure in removing the double poll wait entry if we
hit a wakeup match. This can cause multiple invocations of the wakeup,
which isn't safe.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The original commit appears to have the logic reversed in
amd_fch_gpio_get_direction. Also confirmed by observing the value of
"direction" in the sys tree.
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
Linus Torvalds
Eric Biggers
Joonsoo Kim
Eric Farman
Paolo Bonzini
Thibaut Sautereau
Roman Gushchin
Lu Baolu
Juergen Gross
Adrian Huang
Marc Zyngier
Andy Shevchenko
Hanks Chen
Dmitry Baryshkov
Pali Rohár
Ard Biesheuvel
Anup Patel
Filipe Manana
Josef Bacik
Ulf Hansson
Yoann Congal
Zhang Rui
Jiansong Chen
Evan Quan
Palmer Dabbelt
Zack Rusin
Mark Mielke
Dirk Gouders
Alex Deucher
Jean Delvare
Flora Cui
Sudheesh Mavila
Uwe Kleine-König
Rob Herring
Steven Rostedt (VMware)
yangerkun
Hao Xu
Jiri Kosina
Vincent Huang
Jason A. Donenfeld
Jens Axboe
Maxime Ripard
Ed Wildgoose