Age | Commit message (Collapse) | Author | Files | Lines |
|
The YAML DT encoding has leaked into some array properties. Properties
which are defined as an array should have a schema that's just an array.
That means there should only be a single level of 'minItems',
'maxItems', and/or 'items'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015627.2443334-1-robh@kernel.org
|
|
For a single pinctrl mode, it is not necessary to define pinctrl
properties as the tools always allow pinctrl properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220119015325.2438277-1-robh@kernel.org
|
|
Each independent example should be a separate entry. This allows for
'interrupts' to have different cell sizes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-7-robh@kernel.org
|
|
Each independent example should be a separate entry. This and dropping
'interrupt-parent' allows for 'interrupts' to have different cell sizes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-6-robh@kernel.org
|
|
With 'unevaluatedProperties' support enabled, several SPI based display
binding examples have warnings:
Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected)
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected)
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected)
Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Fix all of these by adding a reference to spi-peripheral-props.yaml.
With this, the description that the binding must follow
spi-controller.yaml is both a bit out of date and redundant, so remove
it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org
|
|
dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.
Simply remove this broken example, as there is already an alternative one
that works fine.
Fixes: 10eadc253ddf ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com
|
|
Cleanup double spaces in some of the comments.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/13b3f66efd3b20f1d9bbb9eff1eca00757ac5367.1642080090.git.stano.jakubek@gmail.com
|
|
sparkfun,qwiic-joystick and st,24c256 had their comments incorrectly
swapped. Swap them to make them correct.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7dc6ddb0b042cd243b2875e9aea81cad541d1c6b.1642080090.git.stano.jakubek@gmail.com
|
|
The vendor prefix for Wingtech [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] http://www.wingtech.com/en
[2] arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103110.GA4488@standask-GA-A55M-S2HP
|
|
The vendor prefix for Thundercomm [1] is used in device tree [2], but
was not documented so far. Add it to the schema to document it.
[1] https://www.thundercomm.com/
[2] arch/arm64/boot/dts/qcom/sdm845-db845c.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103036.GA4456@standask-GA-A55M-S2HP
|
|
The vendor prefix for Huawei [1] is used in device trees [2][3], but was
not documented so far. Add it to the schema to document it.
[1] https://www.huawei.com/en/
[2] arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
[3] arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103005.GA4421@standask-GA-A55M-S2HP
|
|
The vendor prefix for F(x)tec [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.fxtec.com/
[2] arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102926.GA4388@standask-GA-A55M-S2HP
|
|
The vendor prefix for 8devices [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.8devices.com/
[2] arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102842.GA4357@standask-GA-A55M-S2HP
|
|
Commit bcd56fe1aa97 ("power: reset: gpio-restart: increase priority
slightly") changed the default restart priority 129, but did not update
the documentation. Correct this, so the driver and documentation have
the same default value.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110214456.67087-1-sander@svanheule.net
|
|
resets/reset-names are device specific and don't belong in the MDIO bus
schema. For example, it doesn't match what is defined for the
"qca,ar9331-switch" binding which defines "reset-names" to be "switch"
rather than "phy". Neither name is that useful IMO.
Other child properties are also device specific, but those won't conflict
with device schemas.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
|
|
Convert Samsung S5Pv210 SoC clock controller bindings to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-8-krzysztof.kozlowski@canonical.com
|
|
Convert Samsung Exynos5410 SoC clock controller bindings to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-7-krzysztof.kozlowski@canonical.com
|
|
Convert Samsung Exynos5260 SoC clock controller bindings to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-6-krzysztof.kozlowski@canonical.com
|
|
The UFS for Exynos7 SoC clock controller requires additional input
clocks for the FSYS1 clock controller. Update the bindings to reflect
this, at least in theory. In practice, these input clocks are ignored,
so it is rather adjusting of bindings to existing DTS, without affecting
any real users. I understand that is not how it should be done,
though...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-5-krzysztof.kozlowski@canonical.com
|
|
Convert Samsung Exynos7 SoC clock controller bindings to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-4-krzysztof.kozlowski@canonical.com
|
|
Convert Samsung Exynos5433 SoC clock controller bindings to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-3-krzysztof.kozlowski@canonical.com
|