aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek5-30/+18
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-08ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-08KVM: x86: __kvm_vcpu_halt can be staticPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann3-10/+7
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann4-18/+34
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Bounce NHA_GATEWAY in FDB nexthop groupsPetr Machata1-1/+1
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Unlink nexthop group entry in error pathIdo Schimmel1-1/+3
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Fix off-by-one error in error pathIdo Schimmel1-1/+1
A reference was not taken for the current nexthop entry, so do not try to put it in the error path. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix chtls resources release sequenceAyush Sawal1-4/+4
CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal1-0/+5
In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Replace skb_dequeue with skb_peekAyush Sawal1-1/+1
The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Avoid unnecessary freeing of oreq pointerAyush Sawal1-3/+1
In chtls_pass_accept_request(), removing the chtls_reqsk_free() call to avoid oreq freeing twice. Here oreq is the pointer to struct request_sock. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix panic when route to peer not configuredAyush Sawal1-2/+12
If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Remove invalid set_tcb callAyush Sawal1-3/+0
At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix hardware tid leakAyush Sawal1-36/+3
send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07KVM: SVM: Add support for booting APs in an SEV-ES guestTom Lendacky8-6/+63
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence, where the guest vCPU register state is updated and then the vCPU is VMRUN to begin execution of the AP. For an SEV-ES guest, this won't work because the guest register state is encrypted. Following the GHCB specification, the hypervisor must not alter the guest register state, so KVM must track an AP/vCPU boot. Should the guest want to park the AP, it must use the AP Reset Hold exit event in place of, for example, a HLT loop. First AP boot (first INIT-SIPI-SIPI sequence): Execute the AP (vCPU) as it was initialized and measured by the SEV-ES support. It is up to the guest to transfer control of the AP to the proper location. Subsequent AP boot: KVM will expect to receive an AP Reset Hold exit event indicating that the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to awaken it. When the AP Reset Hold exit event is received, KVM will place the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI sequence, KVM will make the vCPU runnable. It is again up to the guest to then transfer control of the AP to the proper location. To differentiate between an actual HLT and an AP Reset Hold, a new MP state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is placed in upon receiving the AP Reset Hold exit event. Additionally, to communicate the AP Reset Hold exit event up to userspace (if needed), a new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD. A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds a new function that, for non SEV-ES guests, invokes the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests, implements the logic above. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexitMaxim Levitsky3-1/+8
It is possible to exit the nested guest mode, entered by svm_set_nested_state prior to first vm entry to it (e.g due to pending event) if the nested run was not pending during the migration. In this case we must not switch to the nested msr permission bitmap. Also add a warning to catch similar cases in the future. Fixes: a7d5c7ce41ac1 ("KVM: nSVM: delay MSR permission processing to first nested VM run") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest modeMaxim Levitsky1-0/+1
We overwrite most of vmcb fields while doing so, so we must mark it as dirty. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: correctly restore nested_run_pending on migrationMaxim Levitsky1-0/+4
The code to store it on the migration exists, but no code was restoring it. One of the side effects of fixing this is that L1->L2 injected events are no longer lost when migration happens with nested run pending. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Clarify TDP MMU page list invariantsBen Gardon1-2/+14
The tdp_mmu_roots and tdp_mmu_pages in struct kvm_arch should only contain pages with tdp_mmu_page set to true. tdp_mmu_pages should not contain any pages with a non-zero root_count and tdp_mmu_roots should only contain pages with a positive root_count, unless a thread holds the MMU lock and is in the process of modifying the list. Various functions expect these invariants to be maintained, but they are not explictily documented. Add to the comments on both fields to document the above invariants. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Ensure TDP MMU roots are freed after yieldBen Gardon1-56/+48
Many TDP MMU functions which need to perform some action on all TDP MMU roots hold a reference on that root so that they can safely drop the MMU lock in order to yield to other threads. However, when releasing the reference on the root, there is a bug: the root will not be freed even if its reference count (root_count) is reduced to 0. To simplify acquiring and releasing references on TDP MMU root pages, and to ensure that these roots are properly freed, move the get/put operations into another TDP MMU root iterator macro. Moving the get/put operations into an iterator macro also helps simplify control flow when a root does need to be freed. Note that using the list_for_each_entry_safe macro would not have been appropriate in this situation because it could keep a pointer to the next root across an MMU lock release + reacquire, during which time that root could be freed. Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 063afacd8730 ("kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU") Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-1-bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07kvm: check tlbs_dirty directlyLai Jiangshan1-2/+1
In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable@vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20201217154118.16497-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86: change in pv_eoi_get_pending() to make code more readableStephen Zhang1-1/+1
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com> Message-Id: <1608277897-1932-1-git-send-email-stephenzhangzsd@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07MAINTAINERS: Really update email address for Sean ChristophersonSean Christopherson1-1/+1
Use my @google.com address in MAINTAINERS, somehow only the .mailmap entry was added when the original update patch was applied. Fixes: c2b1209d852f ("MAINTAINERS: Update email address for Sean Christopherson") Cc: kvm@vger.kernel.org Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210106182916.331743-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86: fix shift out of bounds reported by UBSANPaolo Bonzini1-1/+1
Since we know that e >= s, we can reassociate the left shift, changing the shifted number from 1 to 2 in exchange for decreasing the right hand side by 1. Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Implement perf_test_util more conventionallyAndrew Jones6-146/+166
It's not conventional C to put non-inline functions in header files. Create a source file for the functions instead. Also reduce the amount of globals and rename the functions to something less generic. Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-4-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Use vm_create_with_vcpus in create_vmAndrew Jones5-47/+21
Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: selftests: Factor out guest mode codeAndrew Jones6-257/+189
demand_paging_test, dirty_log_test, and dirty_log_perf_test have redundant guest mode code. Factor it out. Also, while adding a new include, remove the ones we don't need. Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201218141734.54359-2-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.cUros Bizjak1-2/+0
Commit 16809ecdc1e8a moved __svm_vcpu_run the prototype to svm.h, but forgot to remove the original from svm.c. Fixes: 16809ecdc1e8a ("KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests") Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Message-Id: <20201220200339.65115-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_loadNathan Chancellor1-1/+1
When using LLVM's integrated assembler (LLVM_IAS=1) while building x86_64_defconfig + CONFIG_KVM=y + CONFIG_KVM_AMD=y, the following build error occurs: $ make LLVM=1 LLVM_IAS=1 arch/x86/kvm/svm/sev.o arch/x86/kvm/svm/sev.c:2004:15: error: too few operands for instruction asm volatile(__ex("vmsave") : : "a" (__sme_page_pa(sd->save_area)) : "memory"); ^ arch/x86/kvm/svm/sev.c:28:17: note: expanded from macro '__ex' #define __ex(x) __kvm_handle_fault_on_reboot(x) ^ ./arch/x86/include/asm/kvm_host.h:1646:10: note: expanded from macro '__kvm_handle_fault_on_reboot' "666: \n\t" \ ^ <inline asm>:2:2: note: instantiated into assembly here vmsave ^ 1 error generated. This happens because LLVM currently does not support calling vmsave without the fixed register operand (%rax for 64-bit and %eax for 32-bit). This will be fixed in LLVM 12 but the kernel currently supports LLVM 10.0.1 and newer so this needs to be handled. Add the proper register using the _ASM_AX macro, which matches the vmsave call in vmenter.S. Fixes: 861377730aa9 ("KVM: SVM: Provide support for SEV-ES vCPU loading") Link: https://reviews.llvm.org/D93524 Link: https://github.com/ClangBuiltLinux/linux/issues/1216 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Message-Id: <20201219063711.3526947-1-natechancellor@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()Sean Christopherson1-7/+13
Check only the terminal leaf for a "!PRESENT || MMIO" SPTE when looking for reserved bits on valid, non-MMIO SPTEs. The get_walk() helpers terminate their walks if a not-present or MMIO SPTE is encountered, i.e. the non-terminal SPTEs have already been verified to be regular SPTEs. This eliminates an extra check-and-branch in a relatively hot loop. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Use raw level to index into MMIO walks' sptes arraySean Christopherson2-9/+8
Bump the size of the sptes array by one and use the raw level of the SPTE to index into the sptes array. Using the SPTE level directly improves readability by eliminating the need to reason out why the level is being adjusted when indexing the array. The array is on the stack and is not explicitly initialized; bumping its size is nothing more than a superficial adjustment to the stack frame. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-4-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTESean Christopherson3-11/+13
Get the so called "root" level from the low level shadow page table walkers instead of manually attempting to calculate it higher up the stack, e.g. in get_mmio_spte(). When KVM is using PAE shadow paging, the starting level of the walk, from the callers perspective, is not the CR3 root but rather the PDPTR "root". Checking for reserved bits from the CR3 root causes get_mmio_spte() to consume uninitialized stack data due to indexing into sptes[] for a level that was not filled by get_walk(). This can result in false positives and/or negatives depending on what garbage happens to be on the stack. Opportunistically nuke a few extra newlines. Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Reported-by: Richard Herbert <rherbert@sympatico.ca> Cc: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()Sean Christopherson2-2/+7
Return -1 from the get_walk() helpers if the shadow walk doesn't fill at least one spte, which can theoretically happen if the walk hits a not-present PDPTR. Returning the root level in such a case will cause get_mmio_spte() to return garbage (uninitialized stack data). In practice, such a scenario should be impossible as KVM shouldn't get a reserved-bit page fault with a not-present PDPTR. Note, using mmu->root_level in get_walk() is wrong for other reasons, too, but that's now a moot point. Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20201218003139.2167891-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07net: ip: always refragment ip defragmented packetsFlorian Westphal1-1/+1
Conntrack reassembly records the largest fragment size seen in IPCB. However, when this gets forwarded/transmitted, fragmentation will only be forced if one of the fragmented packets had the DF bit set. In that case, a flag in IPCB will force fragmentation even if the MTU is large enough. This should work fine, but this breaks with ip tunnels. Consider client that sends a UDP datagram of size X to another host. The client fragments the datagram, so two packets, of size y and z, are sent. DF bit is not set on any of these packets. Middlebox netfilter reassembles those packets back to single size-X packet, before routing decision. packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit isn't set. At output time, ip refragmentation is skipped as well because x is still smaller than the mtu of the output device. If ttransmit device is an ip tunnel, the packet size increases to x+overhead. Also, tunnel might be configured to force DF bit on outer header. In this case, packet will be dropped (exceeds MTU) and an ICMP error is generated back to sender. But sender already respects the announced MTU, all the packets that it sent did fit the announced mtu. Force refragmentation as per original sizes unconditionally so ip tunnel will encapsulate the fragments instead. The only other solution I see is to place ip refragmentation in the ip_tunnel code to handle this case. Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet") Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: fix pmtu check in nopmtudisc modeFlorian Westphal1-6/+5
For some reason ip_tunnel insist on setting the DF bit anyway when the inner header has the DF bit set, EVEN if the tunnel was configured with 'nopmtudisc'. This means that the script added in the previous commit cannot be made to work by adding the 'nopmtudisc' flag to the ip tunnel configuration. Doing so breaks connectivity even for the without-conntrack/netfilter scenario. When nopmtudisc is set, the tunnel will skip the mtu check, so no icmp error is sent to client. Then, because inner header has DF set, the outer header gets added with DF bit set as well. IP stack then sends an error to itself because the packet exceeds the device MTU. Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.") Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection trackingFlorian Westphal2-1/+208
Convert Christians bug description into a reproducer. Cc: Shuah Khan <shuah@kernel.org> Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07docs: octeontx2: tune rst markupLukas Bulwahn1-26/+36
Commit 80b9414832a1 ("docs: octeontx2: Add Documentation for NPA health reporters") added new documentation with improper formatting for rst, and caused a few new warnings for make htmldocs in octeontx2.rst:169--202. Tune markup and formatting for better presentation in the HTML view. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20210106161735.21751-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net/mlx5e: Fix memleak in mlx5e_create_l2_table_groupsDinghao Liu1-0/+1
When mlx5_create_flow_group() fails, ft->g should be freed just like when kvzalloc() fails. The caller of mlx5e_create_l2_table_groups() does not catch this issue on failure, which leads to memleak. Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Fix two double free casesDinghao Liu1-0/+2
mlx5e_create_ttc_table_groups() frees ft->g on failure of kvzalloc(), but such failure will be caught by its caller in mlx5e_create_ttc_table() and ft->g will be freed again in mlx5e_destroy_flow_table(). The same issue also occurs in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after kfree() to avoid double free. Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: Release devlink object if adev failsLeon Romanovsky1-2/+5
Add missed freeing previously allocated devlink object. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: ethtool, Fix restriction of autoneg with 56GAya Levin1-6/+18
Prior to this patch, configuring speed to 50G with autoneg off over devices supporting 50G per lane failed. Support for 50G per lane introduced a new set of link-modes, on which driver always performed a speed validation as if only legacy link-modes were configured. Fix driver speed validation to force setting autoneg over 56G only if in legacy link-mode. Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: In skb build skip setting mark in switchdev modeMaor Dickman1-0/+5
sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode to restore the chain id in case of a miss and in LEGACY mode to support skbedit mark action. In build RX skb, the skb mark field is set regardless of the configured mode which cause a corruption of the mark field in case of switchdev mode. Fix by overriding the mark value back to 0 in the representor tc update skb flow. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: E-Switch, fix changing vf VLANIDAlaa Hleihel1-14/+13
Adding vf VLANID for the first time, or after having cleared previously defined VLANID works fine, however, attempting to change an existing vf VLANID clears the rules on the firmware, but does not add new rules for the new vf VLANID. Fix this by changing the logic in function esw_acl_egress_lgcy_setup() so that it will always configure egress rules. Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Fix SWP offsets when vlan inserted by driverMoshe Shemesh3-7/+19
In case WQE includes inline header the vlan is inserted by driver even if vlan offload is set. On geneve over vlan interface where software parser is used the SWP offsets should be updated according to the added vlan. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: CT: Use per flow counter when CT flow accounting is enabledOz Shlomo1-28/+49
Connection counters may be shared for both directions when the counter is used for connection aging purposes. However, if TC flow accounting is enabled then a unique counter is required per direction. Instantiate a unique counter per direction if the conntrack accounting extension is enabled. Use a shared counter when the connection accounting extension is disabled. Fixes: 1edae2335adf ("net/mlx5e: CT: Use the same counter for both directions") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.