aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12mlxsw: core: Add EMAD string TLVShalom Toledo2-1/+24
Add EMAD string TLV, an ASCII string the driver can receive from the firmware in case of an error. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: emad: Remove deprecated EMAD TLVsShalom Toledo1-4/+1
Remove deprecated EMAD TLVs. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Parse TLVs' offsets of incoming EMADsShalom Toledo1-11/+42
Until now the code assumes a fixed structure which makes it difficult to support EMADs with and without new TLVs. Make it more generic by parsing the TLVs when the EMADs are received and store the offset to the different TLVs in the control block. Using these offsets to extract information from the EMADs without relying on a specific structure. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: ethernet: ti: Add dependency for TI_DAVINCI_EMACMao Wenan1-0/+1
If TI_DAVINCI_EMAC=y and GENERIC_ALLOCATOR is not set, below erros can be seen: drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.14': davinci_cpdma.c:(.text+0x359): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x365): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x373): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x37f): undefined reference to `gen_pool_size' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x4a2): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit_si': davinci_cpdma.c:(.text+0x66c): undefined reference to `gen_pool_alloc_algo_owner' davinci_cpdma.c:(.text+0x805): undefined reference to `gen_pool_free_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': davinci_cpdma.c:(.text+0xabd): undefined reference to `devm_gen_pool_create' davinci_cpdma.c:(.text+0xb79): undefined reference to `gen_pool_add_owner' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': davinci_cpdma.c:(.text+0x16c6): undefined reference to `gen_pool_avail' This patch mades TI_DAVINCI_EMAC select GENERIC_ALLOCATOR. Fixes: 99f629718272 ("net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Implement UDP Segmentation OffloadJose Abreu1-9/+23
Implement the UDP Segmentation Offload feature in stmmac. This is only available in GMAC4+ cores. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Rework stmmac_rx()Jose Abreu1-52/+94
This looks over-engineered. Let's use some helpers to get the buffer length and hereby simplify the stmmac_rx() function. No performance drop was seen with the new implementation. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: tc: Remove the speed dependencyJose Abreu1-2/+0
XGMAC3 supports full CBS features with speeds that can go up to 10G so we can now remove the maximum speed check of CBS. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacksJose Abreu1-10/+48
Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was tested using Synopsys DesignWare XPCS. v2: - Pull out the readl_poll_timeout() calls into common code (Andrew) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: gmac4+: Add Split Header supportJose Abreu5-3/+46
GMAC4+ cores also support the Split Header feature. Add the support for Split Header feature in the RX path following the same implementation logic that XGMAC followed. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Fix sparse warningJose Abreu4-5/+6
The VID is converted to le16 so the variable must be __le16 type. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11cxgb4: remove redundant assignment to hdr_lenColin Ian King1-1/+0
Variable hdr_len is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11tipc: fix update of the uninitialized variable errColin Ian King1-1/+1
Variable err is not uninitialized and hence can potentially contain any garbage value. This may cause an error when logical or'ing the return values from the calls to functions crypto_aead_setauthsize or crypto_aead_setkey. Fix this by setting err to the return of crypto_aead_setauthsize rather than or'ing in the return into the uninitialized variable Addresses-Coverity: ("Uninitialized scalar variable") Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11Documentation: networking: dpaa_eth: adjust sysfs pathsMadalin Bucur1-2/+2
The sysfs paths changed, updating to the current ones. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11Documentation: networking: dpaa_eth: adjust buffer pool infoMadalin Bucur1-4/+4
Recent changes in the dpaa_eth driver reduced the number of buffer pools per interface from three to one. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11samples/bpf: adjust Makefile and README.rstJesper Dangaard Brouer2-9/+7
Side effect of some kbuild changes resulted in breaking the documented way to build samples/bpf/. This patch change the samples/bpf/Makefile to work again, when invoking make from the subdir samples/bpf/. Also update the documentation in README.rst, to reflect the new way to build. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11mlxsw: core: Enable devlink reload only on probeJiri Pirko1-2/+3
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by: Shalom Toledo <shalomt@mellanox.com> Fixes: a0c76345e3d3 ("devlink: disallow reload operation during device cleanup") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11r8169: add support for RTL8117Heiner Kallweit1-15/+120
Add support for chip version RTL8117. Settings have been copied from Realtek's r8168 driver, there however chip ID 54a belongs to a chip version called RTL8168FP. It was confirmed that RTL8117 works with Realtek's driver, so both chip versions seem to be the same or at least compatible. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: allow modules with slow diagnostics to probeRussell King1-22/+74
When a module is inserted, we attempt to read read the ID from address 0x50. Once we are able to read the ID, we immediately attempt to initialise the hwmon support by reading from address 0x51. If this fails, then we fall into error state, and assume that the module is not usable. Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for I2C address 0x50, which responds immediately. However, address 0x51 is an emulated, which only becomes available once the on-board firmware has booted. This prompts us to fall into the error state. Since the module may be usable without diagnostics, arrange for the hwmon probe independent of the rest of the SFP itself, retrying every 5s for up to about 60s for the monitoring to become available, and print an error message if it doesn't become available. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: allow sfp to probe slow to initialise GPON modulesRussell King1-10/+28
Some GPON modules (e.g. Huawei MA5671A) take a significant amount of time to start responding on the I2C bus, contary to the SFF specifications. Work around this by implementing a two-level timeout strategy, where we initially quickly retry for the module, and then use a slower retry after we exceed a maximum number of quick attempts. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: move module insert reporting out of probeRussell King1-18/+40
Move the module insertion reporting out of the probe handling, but after we have detected that the upstream has attached (since that is whom we are reporting insertion to.) Only report module removal if we had previously reported a module insertion. This gives cleaner semantics, and means we can probe the module before we have an upstream attached. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: split power mode switching from probeRussell King1-37/+64
Switch the power mode switching from the probe, so that we don't repeatedly re-probe the SFP device if there is a problem accessing the registers at I2C address 0x51. In splitting this out, we can also fix a bug where we leave the module in high-power mode when the upstream device is detached but the module is still inserted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: track upstream's attachment state in state machineRussell King1-13/+29
Track the upstream's attachment state in the state machine rather than maintaining a boolean, which ensures that we have a strict order of ATTACH followed by an UP event - we can never believe that a newly attached upstream will be anything but down. Rearrange the order of state machines so we run the module state machine after the upstream device's state machine, so the module state machine can check the current state of the device and take action to e.g. reset back to empty state when the upstream is detached. This is to allow the module detection to run independently of the network device becoming available. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: ensure TX_FAULT has deasserted before probing the PHYRussell King1-6/+25
TX_FAULT should be deasserted to indicate that the module has completed its initialisation. This may include the on-board PHY, so wait until the module has deasserted TX_FAULT before probing the PHY. This means that we need an extra state to handle a TX_FAULT that remains set for longer than t_init, since using the existing handling state would bypass the PHY probe. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: allow fault processing to transition to other statesRussell King1-6/+6
Add the next state to sfp_sm_fault() so that it can branch to other states. This will be necessary to improve the initialisation path. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: eliminate mdelay() from PHY probeRussell King1-12/+40
Rather than using mdelay() to wait before probing the PHY (which holds several locks, including the rtnl lock), add an extra wait state to the state machine to introduce the 50ms delay without holding any locks. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: split the PHY probe from sfp_sm_mod_init()Russell King1-8/+13
Move the PHY probe into a separate function, splitting it from sfp_sm_mod_init(). This will allow us to eliminate the 50ms mdelay() inside the state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: control TX_DISABLE and phy only from main state machineRussell King1-8/+1
We initialise TX_DISABLE when the sfp cage is probed, and then maintain its state in the main state machine. However, the module state machine: - negates it when detecting a newly inserted module when it's already guaranteed to be negated. - negates it when the module is removed, but the main state machine will do this anyway. Make TX_DISABLE entirely controlled by the main state machine. The main state machine also probes the module for a PHY, and removes the PHY when the the module is removed. Hence, removing the PHY in sfp_sm_module_remove() is also redundant, and is a left-over from when we tried to probe for the PHY from the module state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: avoid power switch on address-change modulesRussell King1-11/+20
If the module indicates that it requires an address change sequence to switch between address 0x50 and 0x51, which we don't support, we can't write to the register that controls the power mode to switch to high power mode. Warn the user that the module may not be functional in this case, and don't try to change the power mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: parse SFP power requirement earlierRussell King1-13/+29
Parse the SFP power requirement earlier, in preparation for moving the power level setup code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: rename T_PROBE_WAIT to T_SERIALRussell King1-7/+6
SFF-8472 rev 12.2 defines the time for the serial bus to become ready using t_serial. Use this as our identifier for this timeout to make it clear what we are referring to. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: handle module remove outside state machineRussell King1-7/+9
Removing a module resets the module state machine back to its initial state. Rather than explicitly handling this in every state, handle it early on outside of the state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: rename sfp_sm_ins_next() as sfp_sm_mod_next()Russell King1-8/+8
sfp_sm_ins_next() modifies the module state machine. Change it's name to reflect this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: move tx disable on device down to main state machineRussell King1-8/+2
Move the tx disable assertion on device down to the main state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: move sfp sub-state machines into separate functionsRussell King1-31/+43
Move the SFP sub-state machines out of the main state machine function, in preparation for it doing a bit more with the device state. By doing so, we ensure that our debug after the main state machine is always printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: sfp: fix sfp_bus_put() kernel documentationRussell King1-1/+1
The kbuild test robot found a problem with htmldocs with the recent change to the SFP interfaces. Fix the kernel documentation for sfp_bus_put() which was missing an '@' before the argument name description. Fixes: 727b3668b730 ("net: sfp: rework upstream interface") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11r8169: respect EEE user setting when restarting networkHeiner Kallweit1-3/+15
Currently, if network is re-started, we advertise all supported EEE modes, thus potentially overriding a manual adjustment the user made e.g. via ethtool. Be friendly to the user and preserve a manual setting on network re-start. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11lwtunnel: ignore any TUNNEL_OPTIONS_PRESENT flags set by usersXin Long1-6/+8
TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT|TUNNEL_VXLAN_OPT| TUNNEL_ERSPAN_OPT) flags should be set only according to tb[LWTUNNEL_IP_OPTS], which is done in ip_tun_parse_opts(). When setting info key.tun_flags, the TUNNEL_OPTIONS_PRESENT bits in tb[LWTUNNEL_IP(6)_FLAGS] passed from users should be ignored. While at it, replace all (TUNNEL_GENEVE_OPT|TUNNEL_VXLAN_OPT| TUNNEL_ERSPAN_OPT) with 'TUNNEL_OPTIONS_PRESENT'. Fixes: 3093fbe7ff4b ("route: Per route IP tunnel metadata via lightweight tunnel") Fixes: 32a2b002ce61 ("ipv6: route: per route IP tunnel metadata via lightweight tunnel") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11lwtunnel: get nlsize for erspan options properlyXin Long1-1/+7
erspan v1 has OPT_ERSPAN_INDEX while erspan v2 has OPT_ERSPAN_DIR and OPT_ERSPAN_HWID attributes, and they require different nlsize when dumping. So this patch is to get nlsize for erspan options properly according to erspan version. Fixes: b0a21810bd5e ("lwtunnel: add options setting and dumping for erspan") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11lwtunnel: change to use nla_parse_nested on new optionsXin Long1-8/+8
As the new options added in kernel, all should always use strict parsing from the beginning with nla_parse_nested(), instead of nla_parse_nested_deprecated(). Fixes: b0a21810bd5e ("lwtunnel: add options setting and dumping for erspan") Fixes: edf31cbb1502 ("lwtunnel: add options setting and dumping for vxlan") Fixes: 4ece47787077 ("lwtunnel: add options setting and dumping for geneve") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: don't hardcode the number of the CPU portVladimir Oltean1-4/+7
VSC7514 is a 10-port switch with 2 extra "CPU ports" (targets in the queuing subsystem for terminating traffic locally). There are 2 issues with hardcoding the CPU port as #10: - It is not clear which snippets of the code are configuring something for one of the CPU ports, and which snippets are just doing something related to the number of physical ports. - Actually any physical port can act as a CPU port connected to an external CPU (in addition to the local CPU). This is called NPI mode (Node Processor Interface) and is the way that the 6-port VSC9959 (Felix) switch is integrated inside NXP LS1028A (the "local management CPU" functionality is not used there). This patch makes it clear that the ocelot_bridge_stp_state_set function operates on the CPU port (by making it an implicit member of the bridging domain), and at the same time adds logic for the NPI port (aka a physical port) to play the role of a CPU port (it shouldn't be part of bridge_fwd_mask, as it's not explicitly enslaved to a bridge). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: split assignment of the cpu port into a separate functionVladimir Oltean3-22/+57
Now that the places that configure routing destinations for the CPU port have been marked as such, allow callers to specify their own CPU port that is different than ocelot->num_phys_ports. A user will be the Felix DSA driver, where the CPU port is one of the physical ports (NPI mode). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: refactor adjust_link into a netdev-independent functionVladimir Oltean1-10/+17
This will be called from the Felix DSA frontend, which will work in PHYLIB compatibility mode initially. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: initialize list of multicast addresses in common codeClaudiu Manoil2-1/+1
This is just common path code that belongs to ocelot_init, it has nothing to do with a specific SoC/board instance. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: separate the common implementation of ndo_open and ndo_stopVladimir Oltean1-10/+26
Allow these functions to be called from the .port_enable and .port_disable callbacks of DSA. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: move port initialization into separate functionVladimir Oltean1-21/+24
We need a function for the DSA front-end that does none of the net_device registration, but initializes the hardware ports. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: limit vlan ingress filtering to actual number of portsVladimir Oltean1-1/+2
The VSC7514 switch (Ocelot) is a 10-port device, while VSC9959 (Felix) is 6-port. Therefore the VLAN filtering mask would be out of bounds when calling for this new switch. Fix that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: refactor ethtool callbacksVladimir Oltean1-17/+47
Convert them into an implementation that can be called from DSA as well. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: separate net_device related items out of ocelot_portVladimir Oltean6-190/+233
The ocelot and ocelot_port structures will be used by a new DSA driver, so the ocelot_board.c file will have to allocate and work with a private structure (ocelot_port_private), which embeds the generic struct ocelot_port. This is because in DSA, at least one interface does not have a net_device, and the DSA driver API does not interact with that anyway. The ocelot_port structure is equivalent to dsa_port, and ocelot to dsa_switch. The members of ocelot_port which have an equivalent in dsa_port (such as dp->vlan_filtering) have been moved to ocelot_port_private. We want to enforce the coding convention that "ocelot_port" refers to the structure, and "port" refers to the integer index. One can retrieve the structure at any time from ocelot->ports[port]. The patch is large but only contains variable renaming and mechanical movement of fields from one structure to another. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: refactor struct ocelot_port out of function prototypesVladimir Oltean4-65/+59
The ocelot_port structure has a net_device embedded in it, which makes it unsuitable for leaving it in the driver implementation functions. Leave ocelot_flower.c untouched. In that file, ocelot_port is used as an interface to the tc shared blocks. That will be addressed in the next patch. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: mscc: ocelot: change prototypes of switchdev port attribute handlersVladimir Oltean1-43/+45
This is needed so that the Felix DSA front-end can call the Ocelot implementations. The implementation of the "mc_disabled" switchdev attribute has also been simplified by using the read-modify-write macro instead of open-coding that operation. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.