aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-08kprobes: Prohibit probes in gate areaChristian A. Ehrhardt1-0/+1
The system call gate area counts as kernel text but trying to install a kprobe in this area fails with an Oops later on. To fix this explicitly disallow the gate area for kprobes. Found by syzkaller with the following reproducer: perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0) Sample report: BUG: unable to handle page fault for address: fffffbfff3ac6000 PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0 Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> insn_get_prefixes arch/x86/lib/insn.c:131 [inline] insn_get_opcode arch/x86/lib/insn.c:272 [inline] insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464 insn_get_immediate arch/x86/lib/insn.c:632 [inline] insn_get_length arch/x86/lib/insn.c:707 [inline] insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739 prepare_kprobe kernel/kprobes.c:1160 [inline] register_kprobe kernel/kprobes.c:1641 [inline] register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline] __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261 perf_init_event kernel/events/core.c:11325 [inline] perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619 perf_event_alloc kernel/events/core.c:12059 [inline] __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f63ef7efaed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0 RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000 </TASK> Modules linked in: CR2: fffffbfff3ac6000 ---[ end trace 0000000000000000 ]--- RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 ================================================================== Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-08perf record: Fix synthesis failure warningsAdrian Hunter1-2/+6
Some calls to synthesis functions set err < 0 but only warn about the failure and continue. However they do not set err back to zero, relying on subsequent code to do that. That changed with the introduction of option --synth. When --synth=no subsequent functions that set err back to zero are not called. Fix by setting err = 0 in those cases. Example: Before: $ perf record --no-bpf-event --synth=all -o /tmp/huh uname Couldn't synthesize bpf events. Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ] $ perf record --no-bpf-event --synth=no -o /tmp/huh uname Couldn't synthesize bpf events. After: $ perf record --no-bpf-event --synth=no -o /tmp/huh uname Couldn't synthesize bpf events. Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ] Fixes: 41b740b6e8a994e5 ("perf record: Add --synth option") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08perf tools: Don't install data files with x permissionsJiri Slaby1-12/+12
install(1), by default, installs with rwxr-xr-x permissions. Modify perf's Makefile to pass '-m 644' when installing: * Documentation/tips.txt * examples/bpf/* * perf-completion.sh * perf_dlfilter.h header * scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* * scripts/perl/*.pl * tests/attr/* * tests/attr.py * tests/shell/lib/*.sh * trace/strace/groups/* All those are supposed to be non-executable. Either they are not scripts at all, or they don't have shebang. Signed-off-by: <jslaby@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.cz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08perf script: Fix Cannot print 'iregs' field for hybrid systemsZhengjun Xing1-0/+3
Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") adds a dummy event on hybrid systems to fix the symbol "unknown" issue when the workload is created in a P-core but runs on an E-core. The added dummy event will cause "perf script -F iregs" to fail. Dummy events do not have "iregs" attribute set, so when we do evsel__check_attr, the "iregs" attribute check will fail, so the issue happened. The following commit [1] has fixed a similar issue by skipping the attr check for the dummy event because it does not have any samples anyway. It works okay for the normal mode, but the issue still happened when running the test in the pipe mode. In the pipe mode, it calls process_attr() which still checks the attr for the dummy event. This commit fixed the issue by skipping the attr check for the dummy event in the API evsel__check_attr, Otherwise, we have to patch everywhere when evsel__check_attr() is called. Before: #./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field. 0x120 [0x90]: failed to process type: 64 # After: # ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100 ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71 ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0 ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1 ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58 # [1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/ Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08perf lock: Remove redundant word 'contention' in help messageYang Jihong1-2/+1
Before: # perf lock -h Usage: perf lock [<options>] {record|report|script|info|contention|contention} -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose (show symbol address, etc) --kallsyms <file> kallsyms pathname --vmlinux <file> vmlinux pathname After: # perf lock -h Usage: perf lock [<options>] {record|report|script|info|contention} -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose (show symbol address, etc) --kallsyms <file> kallsyms pathname --vmlinux <file> vmlinux pathname Fixes: 528b9cab3b813a3b ("perf lock: Add 'contention' subcommand") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220908014854.151203-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08perf dlfilter dlfilter-show-cycles: Fix types for print formatAdrian Hunter1-2/+2
Avoid compiler warning about format %llu that expects long long unsigned int but argument has type __u64. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Fixes: c3afd6e50fce824f ("perf dlfilter: Add dlfilter-show-cycles") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220905074735.4513-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08libperf evlist: Fix per-thread mmaps for multi-threaded targetsAdrian Hunter1-0/+50
The offending commit removed mmap_per_thread(), which did not consider the different set-output rules for per-thread mmaps i.e. in the per-thread case set-output is used for file descriptors of the same thread not the same cpu. This was not immediately noticed because it only happens with multi-threaded targets and we do not have a test for that yet. Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu events i.e. to continue to allow the mixing of per-thread and per-cpu mmaps. Debug messages (with -vv) show the file descriptors that are opened with sys_perf_event_open. New debug messages are added (needs -vvv) that show also which file descriptors are mmapped and which are redirected with set-output. In the per-cpu case (cpu != -1) file descriptors for the same CPU are set-output to the first file descriptor for that CPU. In the per-thread case (cpu == -1) file descriptors for the same thread are set-output to the first file descriptor for that thread. Example (process 17489 has 2 threads): Before (but with new debug prints): $ perf record --no-bpf-event -vvv --per-thread -p 17489 <SNIP> sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6 <SNIP> libperf: idx 0: mmapping fd 5 libperf: idx 0: set output fd 6 -> 5 failed to mmap with 22 (Invalid argument) After: $ perf record --no-bpf-event -vvv --per-thread -p 17489 <SNIP> sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6 <SNIP> libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2 libperf: idx 0: mmapping fd 5 libperf: idx 1: mmapping fd 6 <SNIP> [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ] Per-cpu example (process 20341 has 2 threads, same as above): $ perf record --no-bpf-event -vvv -p 20341 <SNIP> sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8 sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15 sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16 sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17 sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18 sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19 sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20 <SNIP> libperf: mmap_per_cpu: nr cpu values 8 nr threads 2 libperf: idx 0: mmapping fd 5 libperf: idx 0: set output fd 6 -> 5 libperf: idx 1: mmapping fd 7 libperf: idx 1: set output fd 8 -> 7 libperf: idx 2: mmapping fd 9 libperf: idx 2: set output fd 10 -> 9 libperf: idx 3: mmapping fd 11 libperf: idx 3: set output fd 12 -> 11 libperf: idx 4: mmapping fd 13 libperf: idx 4: set output fd 14 -> 13 libperf: idx 5: mmapping fd 15 libperf: idx 5: set output fd 16 -> 15 libperf: idx 6: mmapping fd 17 libperf: idx 6: set output fd 18 -> 17 libperf: idx 7: mmapping fd 19 libperf: idx 7: set output fd 20 -> 19 <SNIP> [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Reported-by: Tomáš Trnka <trnka@scm.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08fs: only do a memory barrier for the first set_buffer_uptodate()Linus Torvalds1-0/+11
Commit d4252071b97d ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Fengwei Yin <fengwei.yin@intel.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-09-08sch_sfb: Also store skb len before calling child enqueueToke Høiland-Jørgensen1-1/+2
Cong Wang noticed that the previous fix for sch_sfb accessing the queued skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue function was also calling qdisc_qstats_backlog_inc() after enqueue, which reads the pkt len from the skb cb field. Fix this by also storing the skb len, and using the stored value to increment the backlog after enqueueing. Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08net: phy: lan87xx: change interrupt src of link_up to comm_readyArun Ramadoss1-4/+54
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08powerpc/pseries: Fix plpks crash on non-pseriesMichael Ellerman1-1/+2
As reported[1] by Nathan, the recently added plpks driver will crash if it's built into the kernel and booted on a non-pseries machine, eg powernv: kernel BUG at arch/powerpc/kernel/syscall.c:39! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV ... NIP system_call_exception+0x90/0x3d0 LR system_call_common+0xec/0x250 Call Trace: 0xc0000000035c3e10 (unreliable) system_call_common+0xec/0x250 --- interrupt: c00 at plpar_hcall+0x38/0x60 NIP: c0000000000e4300 LR: c00000000202945c CTR: 0000000000000000 REGS: c0000000035c3e80 TRAP: 0c00 Not tainted (6.0.0-rc4) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28000284 XER: 00000000 ... NIP plpar_hcall+0x38/0x60 LR pseries_plpks_init+0x64/0x23c --- interrupt: c00 On powernv Linux is the hypervisor, so a hypercall just ends up going to the syscall path, which BUGs if the syscall (hypercall) didn't come from userspace. The fix is simply to not probe the plpks driver on non-pseries machines. [1] https://lore.kernel.org/linuxppc-dev/Yxe06fbq18Wv9y3W@dev-arch.thelio-3990X/ Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Dan Horák <dan@danny.cz> Reviewed-by: Dan Horák <dan@danny.cz> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220907065038.1604504-1-mpe@ellerman.id.au
2022-09-07efi: capsule-loader: Fix use-after-free in efi_capsule_writeHyunwoo Kim1-24/+7
A race condition may occur if the user calls close() on another thread during a write() operation on the device node of the efi capsule. This is a race condition that occurs between the efi_capsule_write() and efi_capsule_flush() functions of efi_capsule_fops, which ultimately results in UAF. So, the page freeing process is modified to be done in efi_capsule_release() instead of efi_capsule_flush(). Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-07net/smc: Fix possible access to freed memory in link clearYacan Liu4-0/+13
After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57718cc ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skbLorenzo Bianconi1-0/+3
Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUMMenglong Dong5-24/+87
As Eric reported, the 'reason' field is not presented when trace the kfree_skb event by perf: $ perf record -e skb:kfree_skb -a sleep 10 $ perf script ip_defrag 14605 [021] 221.614303: skb:kfree_skb: skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1 reason: The cause seems to be passing kernel address directly to TP_printk(), which is not right. As the enum 'skb_drop_reason' is not exported to user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason string from the 'reason' field, which is a number. Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used to define the trace enum by TRACE_DEFINE_ENUM(). With the help of DEFINE_DROP_REASON(), now we can remove the auto-generate that we introduced in the commit ec43908dd556 ("net: skb: use auto-generation to convert skb drop reason to string"), and define the string array 'drop_reasons'. Hmmmm...now we come back to the situation that have to maintain drop reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they are both in dropreason.h, which makes it easier. After this commit, now the format of kfree_skb is like this: $ cat /tracing/events/skb/kfree_skb/format name: kfree_skb ID: 1524 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:void * skbaddr; offset:8; size:8; signed:0; field:void * location; offset:16; size:8; signed:0; field:unsigned short protocol; offset:24; size:2; signed:0; field:enum skb_drop_reason reason; offset:28; size:4; signed:0; print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ...... Fixes: ec43908dd556 ("net: skb: use auto-generation to convert skb drop reason to string") Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/ Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clearLorenzo Bianconi1-1/+1
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_setVladimir Oltean1-2/+2
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprioVladimir Oltean1-43/+79
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packetVladimir Oltean1-4/+31
The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07ALSA: usb-audio: Clear fixed clock rate at closing EPTakashi Iwai1-0/+2
The recent commit c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock") tries to manage the clock rate shared by several endpoints. This was intended for avoiding the unmatched rate by a different endpoint, but unfortunately, it introduced a regression for PulseAudio and pipewire, too; those applications try to probe the multiple possible rates (44.1k and 48kHz) and setting up the normal rate fails but only the last rate is applied. The cause is that the last sample rate is still left to the clock reference even after closing the endpoint, and this value is still used at the next open. It happens only when applications set up via PCM prepare but don't start/stop the stream; the rate is reset when the stream is stopped, but it's not cleared at close. This patch addresses the issue above, simply by clearing the rate set in the clock reference at the last close of each endpoint. Fixes: c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/ Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620 Link: https://lore.kernel.org/r/20220907100421.6443-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-07efi/x86: libstub: remove unused variablechen zhang1-1/+0
The variable "has_system_memory" is unused in function ‘adjust_memory_range_protection’, remove it. Signed-off-by: chen zhang <chenzhang@kylinos.cn> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-07ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()Tasos Sahanidis1-1/+1
The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-06rv/reactor: add __init/__exit annotations to module init/exit funcsXiu Jianfeng2-4/+4
Add missing __init/__exit annotations to module init/exit funcs. Link: https://lkml.kernel.org/r/20220906141210.132607-1-xiujianfeng@huawei.com Fixes: 135b881ea885 ("rv/reactor: Add the printk reactor") Fixes: e88043c0ac16 ("rv/reactor: Add the panic reactor") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06tracing: Fix to check event_mutex is held while accessing trigger listMasami Hiramatsu (Google)1-1/+2
Since the check_user_trigger() is called outside of RCU read lock, this list_for_each_entry_rcu() caused a suspicious RCU usage warning. # echo hist:keys=pid > events/sched/sched_stat_runtime/trigger # cat events/sched/sched_stat_runtime/trigger [ 43.167032] [ 43.167418] ============================= [ 43.167992] WARNING: suspicious RCU usage [ 43.168567] 5.19.0-rc5-00029-g19ebe4651abf #59 Not tainted [ 43.169283] ----------------------------- [ 43.169863] kernel/trace/trace_events_trigger.c:145 RCU-list traversed in non-reader section!! ... However, this file->triggers list is safe when it is accessed under event_mutex is held. To fix this warning, adds a lockdep_is_held check to the list_for_each_entry_rcu(). Link: https://lkml.kernel.org/r/166226474977.223837.1992182913048377113.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06tracing: hold caller_addr to hardirq_{enable,disable}_ipYipeng Zou1-2/+2
Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed in CALLER_ADDR0. The function trace_hardirqs_on_caller should have been intended to use caller_addr to represent the address that caller wants to be traced. For example, lockdep log in riscv showing the last {enabled,disabled} at __trace_hardirqs_{on,off} all the time(if called by): [ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14 [ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14 After use trace_hardirqs_xx_caller, we can get more effective information: [ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66 [ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10 Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com Cc: stable@vger.kernel.org Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06tracepoint: Allow trace events in modules with TAINT_TESTAlison Schofield1-2/+3
Commit 2852ca7fba9f ("panic: Taint kernel if tests are run") introduced a new taint type, TAINT_TEST, to signal that an in-kernel test module has been loaded. TAINT_TEST taint type defaults into a 'bad_taint' list for kernel tracing and blocks the creation of trace events. This causes a problem for CXL testing where loading the cxl_test module makes all CXL modules out-of-tree, blocking any trace events. Trace events are in development for CXL at the moment and this issue was found in test with v6.0-rc1. Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com Fixes: 2852ca7fba9f7 ("panic: Taint kernel if tests are run") Reported-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06MAINTAINERS: add scripts/tracing/ to TRACINGLukas Bulwahn1-0/+1
The files in scripts/tracing/ belong to the TRACING subsystem. Add a corresponding file entry for TRACING. Link: https://lkml.kernel.org/r/20220825115927.20598-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06MAINTAINERS: Add Runtime Verification (RV) entryDaniel Bristot de Oliveira1-0/+11
Add a Runtime Verification (RV) entry in the MAINTAINERS file with Steven Rostedt and myself as maintainers. Link: https://lkml.kernel.org/r/b24c13553b6947a8da16d884ca464e4233eb8fb7.1661268579.git.bristot@kernel.org Cc: Joe Perches <joe@perches.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06rv/monitors: Make monitor's automata definition staticDaniel Bristot de Oliveira2-2/+2
Monitor's automata definition is only used locally, so make them static for all existing monitors. Link: https://lore.kernel.org/all/202208210332.gtHXje45-lkp@intel.com Link: https://lore.kernel.org/all/202208210358.6HH3OrVs-lkp@intel.com Link: https://lkml.kernel.org/r/a50e27c3738d6ef809f4201857229fed64799234.1661266564.git.bristot@kernel.org Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor") Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-09-06afs: Return -EAGAIN, not -EREMOTEIO, when a file already lockedDavid Howells1-0/+1
When trying to get a file lock on an AFS file, the server may return UAEAGAIN to indicate that the lock is already held. This is currently translated by the default path to -EREMOTEIO. Translate it instead to -EAGAIN so that we know we can retry it. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey E Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-09-06btrfs: fix the max chunk size and stripe length calculationQu Wenruo2-1/+4
[BEHAVIOR CHANGE] Since commit f6fca3917b4d ("btrfs: store chunk size in space-info struct"), btrfs no longer can create larger data chunks than 1G: mkfs.btrfs -f -m raid1 -d raid0 $dev1 $dev2 $dev3 $dev4 mount $dev1 $mnt btrfs balance start --full $mnt btrfs balance start --full $mnt umount $mnt btrfs ins dump-tree -t chunk $dev1 | grep "DATA|RAID0" -C 2 Before that offending commit, what we got is a 4G data chunk: item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176 length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0 io_align 65536 io_width 65536 sector_size 4096 num_stripes 4 sub_stripes 1 Now what we got is only 1G data chunk: item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 6271533056) itemoff 15491 itemsize 176 length 1073741824 owner 2 stripe_len 65536 type DATA|RAID0 io_align 65536 io_width 65536 sector_size 4096 num_stripes 4 sub_stripes 1 This will increase the number of data chunks by the number of devices, not only increase system chunk usage, but also greatly increase mount time. Without a proper reason, we should not change the max chunk size. [CAUSE] Previously, we set max data chunk size to 10G, while max data stripe length to 1G. Commit f6fca3917b4d ("btrfs: store chunk size in space-info struct") completely ignored the 10G limit, but use 1G max stripe limit instead, causing above shrink in max data chunk size. [FIX] Fix the max data chunk size to 10G, and in decide_stripe_size_regular() we limit stripe_size to 1G manually. This should only affect data chunks, as for metadata chunks we always set the max stripe size the same as max chunk size (256M or 1G depending on fs size). Now the same script result the same old result: item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176 length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0 io_align 65536 io_width 65536 sector_size 4096 num_stripes 4 sub_stripes 1 Reported-by: Wang Yugui <wangyugui@e16-tech.com> Fixes: f6fca3917b4d ("btrfs: store chunk size in space-info struct") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-06perf c2c: Prevent potential memory leak in c2c_he_zalloc()Shang XiaoJing1-3/+9
Free allocated resources when zalloc() fails for members in c2c_he, to prevent potential memory leak in c2c_he_zalloc(). Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220906032906.21395-4-shangxiaojing@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-06perf genelf: Switch deprecated openssl MD5_* functions to new EVP APIZixuan Tan1-9/+11
Switch to the flavored EVP API like in test-libcrypto.c, and remove the bad gcc #pragma. Inspired-by: 5b245985a6de5ac1 ("tools build: Switch to new openssl API for test-libcrypto") Signed-off-by: Zixuan Tan <tanzixuan.me@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/CABwm_eTnARC1GwMD-JF176k8WXU1Z0+H190mvXn61yr369qt6g@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-06tools/perf: Fix out of bound access to cpu mask arrayAthira Rajeev1-6/+20
The cpu mask init code in "record__mmap_cpu_mask_init" function access "bits" array part of "struct mmap_cpu_mask". The size of this array is the value from cpu__max_cpu().cpu. This array is used to contain the cpumask value for each cpu. While setting bit for each cpu, it calls "set_bit" function which access index in "bits" array. If we provide a command line option to -C which is greater than the number of CPU's present in the system, the set_bit could access an array member which is out-of the array size. This is because currently, there is no boundary check for the CPU. This will result in seg fault: <<>> ./perf record -C 12341234 ls Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS Segmentation fault (core dumped) <<>> Debugging with gdb, points to function flow as below: <<>> set_bit record__mmap_cpu_mask_init record__init_thread_default_masks record__init_thread_masks cmd_record <<>> Fix this by adding boundary check for the array. After the patch: <<>> ./perf record -C 12341234 ls Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS Failed to initialize parallel data streaming masks <<>> With this fix, if -C is given a non-exsiting CPU, perf record will fail with: <<>> ./perf record -C 50 ls Failed to initialize parallel data streaming masks <<>> Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220905141929.7171-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-06perf affinity: Fix out of bound access to "sched_cpus" maskAthira Rajeev1-1/+7
The affinity code in "affinity_set" function access array named "sched_cpus". The size for this array is allocated in affinity_setup function which is nothing but value from get_cpu_set_size. This is used to contain the cpumask value for each cpu. While setting bit for each cpu, it calls "set_bit" function which access index in sched_cpus array. If we provide a command-line option to -C which is more than the number of CPU's present in the system, the set_bit could access an array member which is out-of the array size. This is because currently, there is no boundary check for the CPU. This will result in seg fault: <<>> ./perf stat -C 12323431 ls Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS Segmentation fault (core dumped) <<>> Fix this by adding boundary check for the array. After the fix from powerpc system: <<>> ./perf stat -C 12323431 ls 1>out Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS Performance counter stats for 'CPU(s) 12323431': <not supported> msec cpu-clock <not supported> context-switches <not supported> cpu-migrations <not supported> page-faults <not supported> cycles <not supported> instructions <not supported> branches <not supported> branch-misses 0.001192373 seconds time elapsed <<>> Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220905141929.7171-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-06net: usb: qmi_wwan: add Quectel RM520Njerry.meng1-0/+1
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_dataChristian Marangi1-1/+1
of_device_get_match_data is called on priv->dev before priv->dev is actually set. Move of_device_get_match_data after priv->dev is correctly set to fix this kernel panic. Fixes: 3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06tcp: fix early ETIMEDOUT after spurious non-SACK RTONeal Cardwell1-7/+18
Fix a bug reported and analyzed by Nagaraj Arankal, where the handling of a spurious non-SACK RTO could cause a connection to fail to clear retrans_stamp, causing a later RTO to very prematurely time out the connection with ETIMEDOUT. Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent report: (*1) Send one data packet on a non-SACK connection (*2) Because no ACK packet is received, the packet is retransmitted and we enter CA_Loss; but this retransmission is spurious. (*3) The ACK for the original data is received. The transmitted packet is acknowledged. The TCP timestamp is before the retrans_stamp, so tcp_may_undo() returns true, and tcp_try_undo_loss() returns true without changing state to Open (because tcp_is_sack() is false), and tcp_process_loss() returns without calling tcp_try_undo_recovery(). Normally after undoing a CA_Loss episode, tcp_fastretrans_alert() would see that the connection has returned to CA_Open and fall through and call tcp_try_to_open(), which would set retrans_stamp to 0. However, for non-SACK connections we hold the connection in CA_Loss, so do not fall through to call tcp_try_to_open() and do not set retrans_stamp to 0. So retrans_stamp is (erroneously) still non-zero. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". However, retrans_stamp is erroneously still set. (And we are still in CA_Loss, which is correct.) (*4) After 16 minutes (to correspond with tcp_retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4) and we disabled keep alives. The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago (step (*2)). (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT, prematurely, because retrans_stamp is (erroneously) too far in the past (set at the time of (*2)). This commit fixes this bug by ensuring that we reuse in tcp_try_undo_loss() the same careful logic for non-SACK connections that we have in tcp_try_undo_recovery(). To avoid duplicating logic, we factor out that logic into a new tcp_is_non_sack_preventing_reopen() helper and call that helper from both undo functions. Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss") Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com> Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/ Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06ALSA: hda: Once again fix regression of page allocations with IOMMUTakashi Iwai2-3/+8
The last fix for trying to recover the regression on AMD platforms, unfortunately, leaded to yet another regression: it turned out that IOMMUs don't like the usage of raw page allocations. This is yet another attempt for addressing the log saga; at this time, we re-use the existing buffer allocation mechanism with SG-pages although we require only single pages. The SG buffer allocation itself was confirmed to work for stream buffers, so it's relatively easy to adapt for other places. The only problem is: although the HD-audio code is accessing the address directly via dmab->address field, SG-pages don't set up it. For the ease of adaption, we now set up the dmab->addr field from the address of the first page as default, so that it can run with the HD-audio driver code as-is without the excessive call of snd_sgbuf_get_addr() multiple times; that's the only change in the memalloc helper side. The rest is nothing but a flip of the dma_type field in the HD-audio side. Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CABXGCsO+kB2t5QyHY-rUe76npr1m0-5JOtt8g8SiHUo34ur7Ww@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216112 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216363 Link: https://lore.kernel.org/r/20220906090319.23358-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-06ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()Dongxiang Ke1-1/+1
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com> Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-06ALSA: hda/tegra: Align BDL entry to 4KB boundaryMohan Kumar1-1/+2
AZA HW may send a burst read/write request crossing 4K memory boundary. The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K boundary. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-05erofs: fix pcluster use-after-free on UP platformsGao Xiang1-29/+0
During stress testing with CONFIG_SMP disabled, KASAN reports as below: ================================================================== BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30 Read of size 8 at addr ffff8881094223f8 by task stress/7789 CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> .. __mutex_lock+0xe5/0xc30 .. z_erofs_do_read_page+0x8ce/0x1560 .. z_erofs_readahead+0x31c/0x580 .. Freed by task 7787 kasan_save_stack+0x1e/0x40 kasan_set_track+0x20/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0x10c/0x190 kmem_cache_free+0xed/0x380 rcu_core+0x3d5/0xc90 __do_softirq+0x12d/0x389 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x97/0xb0 call_rcu+0x3d/0x3f0 erofs_shrink_workstation+0x11f/0x210 erofs_shrink_scan+0xdc/0x170 shrink_slab.constprop.0+0x296/0x530 drop_slab+0x1c/0x70 drop_caches_sysctl_handler+0x70/0x80 proc_sys_call_handler+0x20a/0x2f0 vfs_write+0x555/0x6c0 ksys_write+0xbe/0x160 do_syscall_64+0x3b/0x90 The root cause is that erofs_workgroup_unfreeze() doesn't reset to orig_val thus it causes a race that the pcluster reuses unexpectedly before freeing. Since UP platforms are quite rare now, such path becomes unnecessary. Let's drop such specific-designed path directly instead. Fixes: 73f5c66df3e2 ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'") Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-09-05erofs: avoid the potentially wrong m_plen for big pclusterYue Hu1-8/+8
Actually, 'compressedlcs' stores compressed block count rather than lcluster count. Therefore, the number of bits for shifting the count should be 'LOG_BLOCK_SIZE' rather than 'lclusterbits' although current lcluster size is 4K. The value of 'm_plen' will be wrong once we enable the non 4K-sized lcluster. Signed-off-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20220812060150.8510-1-huyue2@coolpad.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-09-05erofs: fix error return code in erofs_fscache_{meta_,}read_folioSun Ke1-2/+6
If erofs_fscache_alloc_request fail and then goto out, it will return 0. it should return a negative error code instead of 0. Fixes: d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead") Signed-off-by: Sun Ke <sunke32@huawei.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20220815034829.3940803-1-sunke32@huawei.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-09-05asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.Sebastian Andrzej Siewior10-10/+13
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around do_softirq_own_stack() and move it to Kconfig instead. Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT. This ensures that softirq stacks are not used on PREEMPT_RT and avoids a 'select' statement on an option which has a 'depends' statement. Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-05btrfs: zoned: fix mounting with conventional zonesJohannes Thumshirn1-41/+40
Since commit 6a921de58992 ("btrfs: zoned: introduce space_info->active_total_bytes"), we're only counting the bytes of a block group on an active zone as usable for metadata writes. But on a SMR drive, we don't have active zones and short circuit some of the logic. This leads to an error on mount, because we cannot reserve space for metadata writes. Fix this by also setting the BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE bit in the block-group's runtime flag if the zone is a conventional zone. Fixes: 6a921de58992 ("btrfs: zoned: introduce space_info->active_total_bytes") Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-05btrfs: zoned: set pseudo max append zone limit in zone emulation modeShin'ichiro Kawasaki1-3/+12
The commit 7d7672bc5d10 ("btrfs: convert count_max_extents() to use fs_info->max_extent_size") introduced a division by fs_info->max_extent_size. This max_extent_size is initialized with max zone append limit size of the device btrfs runs on. However, in zone emulation mode, the device is not zoned then its zone append limit is zero. This resulted in zero value of fs_info->max_extent_size and caused zero division error. Fix the error by setting non-zero pseudo value to max append zone limit in zone emulation mode. Set the pseudo value based on max_segments as suggested in the commit c2ae7b772ef4 ("btrfs: zoned: revive max_zone_append_bytes"). Fixes: 7d7672bc5d10 ("btrfs: convert count_max_extents() to use fs_info->max_extent_size") CC: stable@vger.kernel.org # 5.12+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-05btrfs: zoned: fix API misuse of zone finish waitingNaohiro Aota4-9/+4
The commit 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress") implemented a zone finish waiting mechanism to the write path of zoned mode. However, using wait_var_event()/wake_up_all() on fs_info->zone_finish_wait is wrong and wait_var_event() just hangs because no one ever wakes it up once it goes into sleep. Instead, we can simply use wait_on_bit_io() and clear_and_wake_up_bit() on fs_info->flags with a proper barrier installed. Fixes: 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress") CC: stable@vger.kernel.org # 5.16+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-05stmmac: intel: Simplify intel_eth_pci_remove()Christophe JAILLET1-2/+0
There is no point to call pcim_iounmap_regions() in the remove function, this frees a managed resource that would be release by the framework anyway. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-2/+2
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.