aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-08-03ionic: tx separate servicingShannon Nelson3-56/+53
We give the tx clean path its own budget and service routine in order to give a little more leeway to be more aggressive, and in preparation for coming changes. We've found this gives us a little better performance in some packet processing scenarios without hurting other scenarios. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03ionic: use fewer firmware doorbells on rx fillShannon Nelson1-10/+5
We really don't need to hit the Rx queue doorbell so many times, we can wait to the end and cause a little less thrash. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: gre: recompute gre csum for sctp over gre tunnelsLorenzo Bianconi1-2/+11
The GRE tunnel can be used to transport traffic that does not rely on a Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC offload has been disabled. In order to fix the issue we need to recompute the GRE csum in gre_gso_segment() not relying on the inner checksum. The issue is still present when we have the CRC offload enabled. In this case we need to disable the CRC offload if we require GRE checksum since otherwise skb_checksum() will report a wrong value. Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: bridge: clear bridge's private skb space on xmitNikolay Aleksandrov1-0/+2
We need to clear all of the bridge private skb variables as they can be stale due to the packet being recirculated through the stack and then transmitted through the bridge device. Similar memset is already done on bridge's input. We've seen cases where proxyarp_replied was 1 on routed multicast packets transmitted through the bridge to ports with neigh suppress which were getting dropped. Same thing can in theory happen with the port isolation bit as well. Fixes: 821f1b21cabb ("bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03ipv6/addrconf: use a boolean to choose between UNREGISTER/DOWNFlorent Fourcot1-12/+12
"how" was used as a boolean. Change the type to bool, and improve variable name Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03ipv6/addrconf: call addrconf_ifdown with consistent valuesFlorent Fourcot1-1/+1
Second parameter of addrconf_ifdown "how" is used as a boolean internally. It does not make sense to call it with something different of 0 or 1. This value is set to 2 in all git history. Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: openvswitch: make masks cache size configurableEelco Chaudron4-14/+115
This patch makes the masks cache size configurable, or with a size of 0, disable it. Reviewed-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: openvswitch: add masks cache hit counterEelco Chaudron5-8/+24
Add a counter that counts the number of masks cache hits, and export it through the megaflow netlink statistics. Reviewed-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: mvpp2: fix memory leak in mvpp2_rxLorenzo Bianconi1-0/+1
Release skb memory in mvpp2_rx() if mvpp2_rx_refill routine fails Fixes: b5015854674b ("net: mvpp2: fix refilling BM pools in RX path") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03ethtool: ethnl_set_linkmodes: remove redundant null checkGaurav Singh1-2/+1
info cannot be NULL here since its being accessed earlier in the function: nlmsg_parse(info->nlhdr...). Remove this redundant NULL check. Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03openvswitch: Prevent kernel-infoleak in ovs_ct_put_key()Peilin Ye1-18/+20
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 3-byte hole at the end of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix it by initializing `orig` with memset(). Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net/sched: act_ct: fix miss set mru for ovs after defrag in act_ctwenxu5-3/+11
When openvswitch conntrack offload with act_ct action. Fragment packets defrag in the ingress tc act_ct action and miss the next chain. Then the packet pass to the openvswitch datapath without the mru. The over mtu packet will be dropped in output action in openvswitch for over mtu. "kernel: net2: dropped over-mtu packet: 1528 > 1500" This patch add mru in the tc_skb_ext for adefrag and miss next chain situation. And also add mru in the qdisc_skb_cb. The act_ct set the mru to the qdisc_skb_cb when the packet defrag. And When the chain miss, The mru is set to tc_skb_ext which can be got by ovs datapath. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: mdio device: use flexible sleeping in reset functionBruno Thomsen1-1/+1
MDIO device reset assert and deassert length was created by usleep_range() but that does not ensure optimal handling of all the different values from device tree properties. By switching to the new flexible sleeping helper function, fsleep(), the correct delay function is called depending on delay length, e.g. udelay(), usleep_range() or msleep(). Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: mdiobus: add reset-post-delay-us handlingBruno Thomsen3-0/+6
Load new "reset-post-delay-us" value from MDIO properties, and if configured to a greater then zero delay do a flexible sleeping delay after MDIO bus reset deassert. This allows devices to exit reset state before start bus communication. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: mdiobus: use flexible sleeping for reset-delay-usBruno Thomsen1-1/+1
MDIO bus reset pulse width is created by using udelay() and that function might not be optimal depending on device tree value. By switching to the new fsleep() helper the correct delay function is called depending on delay length, e.g. udelay(), usleep_range() or msleep(). Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03dt-bindings: net: mdio: add reset-post-delay-us propertyBruno Thomsen1-0/+7
Add "reset-post-delay-us" parameter to MDIO bus properties, so it's possible to add a delay after reset deassert. This is optional in case external hardware slows down release of the reset signal. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01mptcp: fix syncookie build error on UPFlorian Westphal1-3/+1
kernel test robot says: net/mptcp/syncookies.c: In function 'mptcp_join_cookie_init': include/linux/kernel.h:47:38: warning: division by zero [-Wdiv-by-zero] #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) I forgot that spinock_t size is 0 on UP, so ARRAY_SIZE cannot be used. Fixes: 9466a1ccebbe54 ("mptcp: enable JOIN requests even if cookies are in use") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01vxlan: fix memleak of fdbTaehee Yoo1-2/+4
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush(). vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains all-zeros-mac because it is deleted by vxlan_uninit(). But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac and default vni. So, the fdb, which contains both all-zeros-mac and non-default vni will not be deleted. Test commands: ip link add vxlan0 type vxlan dstport 4789 external ip link set vxlan0 up bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \ src_vni 10000 self permanent ip link del vxlan0 kmemleak reports as follows: unreferenced object 0xffff9486b25ced88 (size 96): comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s) hex dump (first 32 bytes): 02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff ........@....... 46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b F.............jk backtrace: [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan] [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff9486b1c40080 (size 128): comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff ..........B..... 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01fib: fix another fib_rules_ops indirect call wrapper problemBrian Vazquez1-0/+6
It turns out that on commit 41d707b7332f ("fib: fix fib_rules_ops indirect calls wrappers") I forgot to include the case when CONFIG_IP_MULTIPLE_TABLES is not set. Fixes: 41d707b7332f ("fib: fix fib_rules_ops indirect calls wrappers") Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Brian Vazquez <brianvv@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01tcp: fix build fong CONFIG_MPTCP=nEric Dumazet1-2/+3
Fixes these errors: net/ipv4/syncookies.c: In function 'tcp_get_cookie_sock': net/ipv4/syncookies.c:216:19: error: 'struct tcp_request_sock' has no member named 'drop_req' 216 | if (tcp_rsk(req)->drop_req) { | ^~ net/ipv4/syncookies.c: In function 'cookie_tcp_reqsk_alloc': net/ipv4/syncookies.c:289:27: warning: unused variable 'treq' [-Wunused-variable] 289 | struct tcp_request_sock *treq; | ^~~~ make[3]: *** [scripts/Makefile.build:280: net/ipv4/syncookies.o] Error 1 make[3]: *** Waiting for unfinished jobs.... Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31rtnetlink: add support for protodown reasonRoopa Prabhu4-5/+147
netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31tun: add missing rcu annotation in tun_set_ebpf()Jason Wang1-1/+1
We expecte prog_p to be protected by rcu, so adding the rcu annotation to fix the following sparse warning: drivers/net/tun.c:3003:36: warning: incorrect type in argument 2 (different address spaces) drivers/net/tun.c:3003:36: expected struct tun_prog [noderef] __rcu **prog_p drivers/net/tun.c:3003:36: got struct tun_prog **prog_p drivers/net/tun.c:3292:42: warning: incorrect type in argument 2 (different address spaces) drivers/net/tun.c:3292:42: expected struct tun_prog **prog_p drivers/net/tun.c:3292:42: got struct tun_prog [noderef] __rcu ** drivers/net/tun.c:3296:42: warning: incorrect type in argument 2 (different address spaces) drivers/net/tun.c:3296:42: expected struct tun_prog **prog_p drivers/net/tun.c:3296:42: got struct tun_prog [noderef] __rcu ** Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31tcp: add earliest departure time to SCM_TIMESTAMPING_OPT_STATSYousuk Seung4-3/+9
This change adds TCP_NLA_EDT to SCM_TIMESTAMPING_OPT_STATS that reports the earliest departure time(EDT) of the timestamped skb. By tracking EDT values of the skb from different timestamps, we can observe when and how much the value changed. This allows to measure the precise delay injected on the sender host e.g. by a bpf-base throttler. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31selftests: mptcp: add test cases for mptcp join tests with syn cookiesFlorian Westphal1-2/+64
Also add test cases with MP_JOIN when tcp_syncookies sysctl is 2 (i.e., syncookies are always-on). While at it, also print the test number and add the test number to the pcap files that can be generated optionally. This makes it easier to match the pcap to the test case. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionallyFlorian Westphal1-0/+47
check we can establish connections also when syn cookies are in use. Check that MPTcpExtMPCapableSYNRX and MPTcpExtMPCapableACKRX increase for each MPTCP test. Check TcpExtSyncookiesSent and TcpExtSyncookiesRecv increase in netns2. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mptcp: enable JOIN requests even if cookies are in useFlorian Westphal6-0/+174
JOIN requests do not work in syncookie mode -- for HMAC validation, the peers nonce and the mptcp token (to obtain the desired connection socket the join is for) are required, but this information is only present in the initial syn. So either we need to drop all JOIN requests once a listening socket enters syncookie mode, or we need to store enough state to reconstruct the request socket later. This adds a state table (1024 entries) to store the data present in the MP_JOIN syn request and the random nonce used for the cookie syn/ack. When a MP_JOIN ACK passed cookie validation, the table is consulted to rebuild the request socket from it. An alternate approach would be to "cancel" syn-cookie mode and force MP_JOIN to always use a syn queue entry. However, doing so brings the backlog over the configured queue limit. v2: use req->syncookie, not (removed) want_cookie arg Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31tcp: syncookies: create mptcp request socket for ACK cookies with MPTCP optionFlorian Westphal4-11/+37
If SYN packet contains MP_CAPABLE option, keep it enabled. Syncokie validation and cookie-based socket creation is changed to instantiate an mptcp request sockets if the ACK contains an MPTCP connection request. Rather than extend both cookie_v4/6_check, add a common helper to create the (mp)tcp request socket. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mptcp: subflow: add mptcp_subflow_init_cookie_req helperFlorian Westphal4-1/+86
Will be used to initialize the mptcp request socket when a MP_CAPABLE request was handled in syncookie mode, i.e. when a TCP ACK containing a MP_CAPABLE option is a valid syncookie value. Normally (non-cookie case), MPTCP will generate a unique 32 bit connection ID and stores it in the MPTCP token storage to be able to retrieve the mptcp socket for subflow joining. In syncookie case, we do not want to store any state, so just generate the unique ID and use it in the reply. This means there is a small window where another connection could generate the same token. When Cookie ACK comes back, we check that the token has not been registered in the mean time. If it was, the connection needs to fall back to TCP. Changes in v2: - use req->syncookie instead of passing 'want_cookie' arg to ->init_req() (Eric Dumazet) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mptcp: rename and export mptcp_subflow_request_sock_opsFlorian Westphal2-5/+7
syncookie code path needs to create an mptcp request sock. Prepare for this and add mptcp prefix plus needed export of ops struct. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mptcp: subflow: split subflow_init_reqFlorian Westphal1-10/+22
When syncookie support is added, we will need to add a variant of subflow_init_req() helper. It will do almost same thing except that it will not compute/add a token to the mptcp token tree. To avoid excess copy&paste, this commit splits away part of the code into a new helper, __subflow_init_req, that can then be re-used from the 'no insert' function added in a followup change. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mptcp: token: move retry to callerFlorian Westphal2-9/+12
Once syncookie support is added, no state will be stored anymore when the syn/ack is generated in syncookie mode. When the ACK comes back, the generated key will be taken from the TCP ACK, the token is re-generated and inserted into the token tree. This means we can't retry with a new key when the token is already taken in the syncookie case. Therefore, move the retry logic to the caller to prepare for syncookie support in mptcp. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31tcp: rename request_sock cookie_ts bit to syncookieFlorian Westphal4-5/+4
Nowadays output function has a 'synack_type' argument that tells us when the syn/ack is emitted via syncookies. The request already tells us when timestamps are supported, so check both to detect special timestamp for tcp option encoding is needed. We could remove cookie_ts altogether, but a followup patch would otherwise need to adjust function signatures to pass 'want_cookie' to mptcp core. This way, the 'existing' bit can be used. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31rds: Prevent kernel-infoleak in rds_notify_queue_get()Peilin Ye1-1/+2
rds_notify_queue_get() is potentially copying uninitialized kernel stack memory to userspace since the compiler may leave a 4-byte hole at the end of `cmsg`. In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which unfortunately does not always initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: f037590fff30 ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc6a2f ("RDS: recv.c") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net/sched: cls_u32: Use struct_size() helperGustavo A. R. Silva1-14/+6
Make use of the struct_size() helper, in multiple places, instead of an open-coded version in order to avoid any potential type mistakes and protect against potential integer overflows. Also, remove unnecessary object identifier size. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31qede: Use %pM format specifier for MAC addressesAndy Shevchenko1-3/+1
Convert to %pM instead of using custom code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31qed: Use %pM format specifier for MAC addressesAndy Shevchenko2-7/+4
Convert to %pM instead of using custom code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31hsr: Use %pM format specifier for MAC addressesAndy Shevchenko1-8/+2
Convert to %pM instead of using custom code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: use all configured RX buffersJulian Wiedmann1-12/+4
The (misplaced) comment doesn't make any sense, enforcing an uninitialized RX buffer won't help with IRQ reduction. So make the best use of all available RX buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: don't process empty bridge port eventsJulian Wiedmann1-0/+4
Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: integrate RX refill worker with NAPIJulian Wiedmann4-18/+26
Running a RX refill outside of NAPI context is inherently racy, even though the worker is only started for an entirely idle RX ring. >From the moment that the worker has replenished parts of the RX ring, the HW can use those RX buffers, raise an IRQ and cause our NAPI code to run concurrently to the RX refill worker. Instead let the worker schedule our NAPI instance, and refill the RX ring from there. Keeping accurate count of how many buffers still need to be refilled also removes some quirky arithmetic from the low-level code. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: tolerate pre-filled RX bufferJulian Wiedmann1-6/+14
When preparing a buffer for RX refill, tolerate that it already has a pool_entry attached. Otherwise we could easily leak such a pool_entry when re-driving the RX refill after an error (from eg. do_qdio()). This needs some minor adjustment in the code that drains RX buffer(s) prior to RX refill and during teardown, so that ->pool_entry is NULLed accordingly. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net: Pass NULL to skb_network_protocol() when we don't care about vlan depthMiaohe Lin1-2/+1
When we don't care about vlan depth, we could pass NULL instead of the address of a unused local variable to skb_network_protocol() as a param. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net/sched: The error lable position is corrected in ct_init_moduleliujian1-2/+2
Exchange the positions of the err_tbl_init and err_register labels in ct_init_module function. Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: liujian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31bluetooth: sco: Fix sockptr reference.David S. Miller1-1/+1
net/bluetooth/sco.c: In function ‘sco_sock_setsockopt’: net/bluetooth/sco.c:862:3: error: cannot convert to a pointer type 862 | if (get_user(opt, (u32 __user *)optval)) { | ^~ Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31Bluetooth: Remove CRYPTO_ALG_INTERNAL flagHerbert Xu2-4/+4
The flag CRYPTO_ALG_INTERNAL is not meant to be used outside of the Crypto API. It isn't needed here anyway. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-07-31Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-07-31libtraceevent: Fix build with binutils 2.35Ben Hutchings1-1/+1
In binutils 2.35, 'nm -D' changed to show symbol versions along with symbol names, with the usual @@ separator. When generating libtraceevent-dynamic-list we need just the names, so strip off the version suffix if present. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31perf tools: Fix record failure when mixed with ARM SPE eventWei Li1-4/+4
When recording with cache-misses and arm_spe_x event, I found that it will just fail without showing any error info if i put cache-misses after 'arm_spe_x' event. [root@localhost 0620]# perf record -e cache-misses \ -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.067 MB perf.data ] [root@localhost 0620]# [root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \ -e cache-misses sleep 1 [root@localhost 0620]# The current code can only work if the only event to be traced is an 'arm_spe_x', or if it is the last event to be specified. Otherwise the last event type will be checked against all the arm_spe_pmus[i]->types, none will match and an out of bound 'i' index will be used in arm_spe_recording_init(). We don't support concurrent multiple arm_spe_x events currently, that is checked in arm_spe_recording_options(), and it will show the relevant info. So add the check and record of the first found 'arm_spe_pmu' to fix this issue here. Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") Signed-off-by: Wei Li <liwei391@huawei.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31perf tests: Fix test 68 zstd compression for s390Thomas Richter1-1/+2
Commit 5aa98879efe7 ("s390/cpum_sf: prohibit callchain data collection") prohibits call graph sampling for hardware events on s390. The information recorded is out of context and does not match. On s390 this commit now breaks test case 68 Zstd perf.data compression/decompression. Therefore omit call graph sampling on s390 in this test. Output before: [root@t35lp46 perf]# ./perf test -Fv 68 68: Zstd perf.data compression/decompression : --- start --- Collecting compressed record file: Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' ---- end ---- Zstd perf.data compression/decompression: FAILED! [root@t35lp46 perf]# Output after: [root@t35lp46 perf]# ./perf test -Fv 68 68: Zstd perf.data compression/decompression : --- start --- Collecting compressed record file: 500+0 records in 500+0 records out 256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M, compressed (original 0.002 MB, ratio is 3.609) ] Checking compressed events stats: # compressed : Zstd, level = 1, ratio = 4 COMPRESSED events: 1 2ELIFREPh---- end ---- Zstd perf.data compression/decompression: Ok [root@t35lp46 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-31tools lib traceevent: Fix memory leak in process_dynamic_array_lenPhilippe Duplessis-Guindon1-0/+1
I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.