| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The checks to skip the CPU itself or no cacheinfo case are implemented
bit differently though the effect is exactly same. Just align the
implementation in both cache_shared_cpu_map_{setup,remove} just for
improved readability. No functional change.
Link: https://lore.kernel.org/r/20220704101605.1318280-9-sudeep.holla@arm.com
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The cache identifiers is an optional property on most of the platforms.
The presence of one must be indicated by the CACHE_ID valid bit in the
attributes.
We can use the cache identifiers provided by the firmware to check if
any two cpus share the same cache instead of relying on the fw_token
generated and set in the OS.
Link: https://lore.kernel.org/r/20220704101605.1318280-8-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Some architecture/platforms may need to setup cache properties very
early in the boot along with other cpu topologies so that all these
information can be used to build sched_domains which is used by the
scheduler.
Allow detect_cache_attributes to be called quite early during the boot.
Link: https://lore.kernel.org/r/20220704101605.1318280-7-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
It is useful to have helper to check if the given two CPUs share last
level cache. We can do that check by comparing fw_token or by comparing
the cache ID. Currently we check just for fw_token as the cache ID is
optional.
This helper can be used to build the llc_sibling during arch specific
topology parsing and feeding information to the sched_domains. This also
helps to get rid of llc_id in the CPU topology as it is sort of duplicate
information.
Also add helper to check if the llc information in cacheinfo is valid
or not.
Link: https://lore.kernel.org/r/20220704101605.1318280-6-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
cache_leaves_are_shared is already used even with ACPI and PPTT. It
checks if the cache leaves are the shared based on fw_token pointer.
However it is defined conditionally only if CONFIG_OF is enabled which
is wrong.
Move the function cache_leaves_are_shared out of CONFIG_OF and keep it
generic. It also handles the case where both OF and ACPI is not defined.
Link: https://lore.kernel.org/r/20220704101605.1318280-5-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The cacheinfo for a given CPU at a given index is used at quite a few
places by fetching the base point for index 0 using the helper
per_cpu_cacheinfo(cpu) and offsetting it by the required index.
Instead, add another helper to fetch the required pointer directly and
use it to simplify and improve readability.
Link: https://lore.kernel.org/r/20220704101605.1318280-4-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The of_cpu_device_node_get takes care of fetching the CPU'd device node
either from cached cpu_dev->of_node if cpu_dev is initialised or uses
of_get_cpu_node to parse and fetch node if cpu_dev isn't available yet.
Just use of_cpu_device_node_get instead of getting the cpu device first
and then using cpu_dev->of_node for two reasons:
1. There is no other use of cpu_dev and can be simplified
2. It enabled the use detect_cache_attributes and hence cache_setup_of_node
much earlier before the CPUs are registered as devices.
Link: https://lore.kernel.org/r/20220704101605.1318280-3-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There is need to use the cache sharing information quite early during
the boot before the secondary cores are up and running. The permanent
memory map for all the ACPI tables(via acpi_permanent_mmap) is turned
on in acpi_early_init() which is quite late for the above requirement.
As a result there is possibility that the ACPI PPTT gets mapped to
different virtual addresses. In such scenarios, using virtual address as
fw_token before the acpi_permanent_mmap is enabled results in different
fw_token for the same cache entity and hence wrong cache sharing
information will be deduced based on the same.
Instead of using virtual address, just use the table offset as the
unique firmware token for the caches. The same offset is used as
ACPI identifiers if the firmware has not set a valid one for other
entries in the ACPI PPTT.
Link: https://lore.kernel.org/r/20220704101605.1318280-2-sudeep.holla@arm.com
Cc: linux-acpi@vger.kernel.org
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
|
|
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194ec57b ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This fixes the build error when the system has a default bash version
which is too old to support associative array variables.
The build error log as fellowing:
linux/scripts/check-local-export: line 11: declare: -A: invalid option
declare: usage: declare [-afFirtx] [-p] [name[=value] ...]
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make nconfig accept jk keybindings for movement in addition to arrow
keys.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
This is a preparation for moving the objtool rule in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Change the "make clean" rule to remove all the .tmp_* files.
.tmp_objdiff is the only exception, which should be removed by
"make mrproper".
Rename the record directory of objdiff, .tmp_objdiff to .objdiff to
avoid the removal by "make clean".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Set default value of ppath to null.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Keep the pa_path (hardware path) of the graphics card in sti_struct and use
this info to give more useful info which card is currently being used.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
|
|
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
|
|
Commit 23cfbc6ec44e ("firmware: Add the support for ZSTD-compressed
firmware files") added support for ZSTD compression, but in the process
also made the previously default XZ compression a config option.
That means that anybody who upgrades their kernel and does a
make oldconfig
to update their configuration, will end up without the XZ compression
that the configuration used to have.
Add the 'default y' to make sure this doesn't happen.
The whole compression question should probably be improved upon, since
it is now possible to "enable" compression in the kernel config but not
enable any actual compression algorithm, which makes it all very
useless. It makes no sense to ask Kconfig questions that enable
situations that are nonsensical like that.
This at least fixes the immediate problem of a kernel update resulting
in a nonbootable machine because of a missed option.
Fixes: 23cfbc6ec44e ("firmware: Add the support for ZSTD-compressed firmware files")
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update JSON metrics for Alderlake to perf.
It included both P-core and E-core metrics.
P-core metrics based on TMA 4.4 (TMA_Metrics-full.csv)
E-core metrics based on E-core TMA 2.0 (E-core_TMA_Metrics.csv)
https://download.01.org/perfmon/
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220528095933.1784141-2-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Sudeep Holla
Linus Torvalds
Al Viro
Schspa Shi
Isak Ellmer
Masahiro Yamada
Steve French
Helge Deller
Zhengjun Xing