| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems superfluous.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220718145328.14374-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The double `of' is duplicated in line 50, remove one.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220722022337.15903-1-gaoxin@cdjrlc.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The 13" Intel version of the Surface Laptop 4 uses the same GPE as the
Surface Laptop Studio for wakeups via the lid. Set it up accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220721121120.2002430-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498bd ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix error flow:
- Clean-up client object in case of probing failure.
- Prevent running remove routine in case of probing failure.
Probing and removing are invoked by hotplug events raised upon line
card insertion and removing. If probing procedure failed all data is
cleared and there is nothing to do in remove routine.
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220719153540.61304-1-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The critclk_systems[] DMI match table already contains 2 Lex BayTrail
boards and patches were just submitted to add 3 more entries for the
following models: 3I380NX, 3I380A, 3I380CW.
Looking at: https://www.lex.com.tw/products/embedded-ipc-board/
we can see that Lex BayTrail makes many embedded boards with
multiple ethernet boards and none of their products are battery
powered so we don't need to worry (too much) about power consumption
when suspended.
Add a new DMI match which simply matches all Lex BayTrail boards and drop
the 2 existing board specific quirks.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-by: Michael Schöne <michael.schoene@rhebo.com>
Reported-by: Paul Spooren <paul.spooren@rhebo.com>
Reported-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Local variable 'p' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'p' with NULL.
Local variable 'io' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'io' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Link: https://lore.kernel.org/r/20220719110341.7239-1-strochuk@ispras.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove an unneeded semicolon.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change > MAX_DIE_PER_PACKAGE to >= MAX_DIE_PER_PACKAGE to prevent
accessing one element beyond the end of the array.
Fixes: 7fd786dfbd2c ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The sources.count field is a __le32 inside a packed struct. So use the
proper functions to access it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220717120735.2052160-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add documentation for the new attributes:
- "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs.
- "asic_reset" and "asic2_reset" - ASICs reset control.
- "comm_chnl_ready" - communication channel indication to remote end (BMC).
- "config3" - indication of system minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-10-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix e-mail in contact fields.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-9-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add lock to protect user read/write access to the registers.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-8-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Extend COME CPLD with board configuration register for getting board
revision. The value of this register is pushed by hardware through GPIO
pins.
The purpose of it is to expose some minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-7-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for new system type XH3000, which is a water cooling
Ethernet switch blade equipped with 32x200G Ethernet ports.
The system is recognized by "DMI_BOARD_NAME" and "DMI_PRODUCT_SKU" matches,
when these fields are set to "VMOD0005" and "HI139" respectively.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Felix Radensky <fradensky@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-6-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Vulcan is chassis containing Nvidia's Hopper dGPU (GH100), NVswitch
(LS10) based HGX baseboard and COMe NVSwitch management module.
The system is built for artificial intelligence and accelerated
analytics applications. Vulcan is offered as an HGX product to cloud
service providers and OEMs, who intend to build fully interconnected
GPU systems for large scale deployments.
Driver is extended to support new COMe NVSwitch management module.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-5-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Motivation is to support new systems equipped with two ASICs.
Extend driver with:
- The second ASIC health event.
- Per ASIC reset control, triggering reset of ASIC internal resources
and restarting ASIC initialization flow.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-4-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Align the first argument with open parenthesis for
platform_device_register_resndata() calls.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-3-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Current assumption in driver that any system is capable of LED,
hotplug or watchdog support. It could be not true for some new coming
systems.
Add validation for LED, hotplug, watchdog configuration and skip
activation of relevant drivers if not configured.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute
LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a
mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control
it. The binding of mic-mute LED controls will be swithched with LED
trigger.
Signed-off-by: PaddyKP_Yao <PaddyKP_Yao@asus.com>
Link: https://lore.kernel.org/r/20220711115125.2072508-1-PaddyKP_Yao@asus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch
driver") adds the section MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
with a file entry, but the file that is added with this commit is actually
named slightly differently.
file entry name: drivers/platform/surface/surface_aggregator_tablet_switch.c
added file name: drivers/platform/surface/surface_aggregator_tabletsw.c
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file entry to the actual file name added with the commit above.
Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220713040916.1767-1-lukas.bulwahn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness
key-presses are handled") made acpi_video_handles_brightness_key_presses()
report false when none of the ACPI Video Devices support backlight control.
But it turns out that at least on a Dell Inspiron N4010 there is no ACPI
backlight control, yet brightness hotkeys are still reported through
the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses()
now returns false, brightness keypresses are now reported twice.
To fix this rename the has_backlight flag to may_report_brightness_keys and
also set it the first time a brightness key press event is received.
Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video
Bus event this means that the first brightness key press might still get
reported twice, but all further keypresses will be filtered as before.
Note that this relies on other drivers reporting brightness key events
calling acpi_video_handles_brightness_key_presses() when delivering
the events (rather then once during driver probe). This is already
required and documented in include/acpi/video.h:
/*
* Note: The value returned by acpi_video_handles_brightness_key_presses()
* may change over time and should not be cached.
*/
Fixes: 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness key-presses are handled")
Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/
Reported-and-tested-by: Ben Greening <bgreening@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220713211101.85547-2-hdegoede@redhat.com
|
|
On Apollo Lake the pinctrl drivers will now come up without ACPI. Use
that instead of open coding it.
Create a new driver for that which can later be filled with more GPIO
based models, and which has different dependencies.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The two drivers that used to use this have been switched over to the
common P2SB accessor, so this code is not needed any longer.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The driver uses rather voodoo kind of castings and I/O accessors.
Replace it with proper __iomem annotation and readl()/readq() calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for non-ACPI systems, such as system that uses
Advanced Boot Loader (ABL) whereby a platform device has to be created
in order to bind with pin control and GPIO.
At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system
requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass
the PCI BAR address to GPIO.
Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Instead of open coding p2sb_bar() functionality we are going to
use generic library. There is one more user en route.
This is more than just a clean-up. It also fixes a potential issue
seen when SPI BAR is 64-bit. The current code works if and only if
the PCI BAR of the hidden device is inside 4G address space. In case
when firmware decides to go above 4G, we will get a wrong address.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Factor out duplicate code to lpc_ich_enable_spi_write() helper function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
In some cases we may get a platform device that has ACPI companion
which is different to the pin control described in the ACPI tables.
This is primarily happens when device is instantiated by board file.
In order to allow this device being enumerated, refactor
intel_pinctrl_get_soc_data() to check the matching data instead of
ACPI companion.
Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
SoC features such as GPIO are accessed via a reserved MMIO area,
we don't know its address but can obtain it from the BAR of
the P2SB device, that device is normally hidden so we have to
temporarily unhide it, read address and hide it back.
There are already a few users and at least one more is coming which
require an access to Primary to Sideband (P2SB) bridge in order
to get IO or MMIO BAR hidden by BIOS.
Create a library to access P2SB for x86 devices in a unified way.
Background information
======================
Note, the term "bridge" is used in the documentation and it has nothing
to do with a PCI (host) bridge as per the PCI specifications.
The P2SB is an interesting device by its nature and hardware design.
First of all, it has several devices in the hardware behind it. These
devices may or may not be represented as ACPI devices by a firmware.
It also has a hardwired (to 0s) the least significant bits of the
base address register which is represented by the only 64-bit BAR0.
It means that OS mustn't reallocate the BAR.
On top of that in some cases P2SB is represented by function 0 on PCI
slot (in terms of B:D.F) and according to the PCI specification any
other function can't be seen until function 0 is present and visible.
In the PCI configuration space of P2SB device the full 32-bit register
is allocated for the only purpose of hiding the entire P2SB device. As
per [3]:
3.1.39 P2SB Control (P2SBC)—Offset E0h
Hide Device (HIDE): When this bit is set, the P2SB will return 1s on
any PCI Configuration Read on IOSF-P. All other transactions including
PCI Configuration Writes on IOSF-P are unaffected by this. This does
not affect reads performed on the IOSF-SB interface.
This doesn't prevent MMIO accesses, although preventing the OS from
assigning these addresses. The firmware on the affected platforms marks
the region as unusable (by cutting it off from the PCI host bridge
resources) as depicted in the Apollo Lake example below:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
The P2SB 16MB BAR is located at 0xd0000000-0xd0ffffff memory window.
The generic solution
====================
The generic solution for all cases when we need to access to the information
behind P2SB device is a library code where users ask for necessary resources
by demand and hence those users take care of not being run on the systems
where this access is not required.
The library provides the p2sb_bar() API to retrieve the MMIO of the BAR0 of
the device from P2SB device slot.
P2SB unconditional unhiding awareness
=====================================
Technically it's possible to unhide the P2SB device and devices on
the same PCI slot and access them at any time as needed. But there are
several potential issues with that:
- the systems were never tested against such configuration and hence
nobody knows what kind of bugs it may bring, especially when we talk
about SPI NOR case which contains Intel FirmWare Image (IFWI) code
(including BIOS) and already known to be problematic in the past for
end users
- the PCI by its nature is a hotpluggable bus and in case somebody
attaches a driver to the functions of a P2SB slot device(s) the
end user experience and system behaviour can be unpredictable
- the kernel code would need some ugly hacks (or code looking as an
ugly hack) under arch/x86/pci in order to enable these devices on
only selected platforms (which may include CPU ID table followed by
a potentially growing number of DMI strings
The future improvements
=======================
The future improvements with this code may go in order to gain some kind
of cache, if it's possible at all, to prevent unhiding and hiding many
times to take static information that may be saved once per boot.
Links
=====
[1]: https://lab.whitequark.org/notes/2017-11-08/accessing-intel-ich-pch-gpios/
[2]: https://cdrdv2.intel.com/v1/dl/getContent/332690?wapkw=332690
[3]: https://cdrdv2.intel.com/v1/dl/getContent/332691?wapkw=332691
[4]: https://medium.com/@jacksonchen_43335/bios-gpio-p2sb-70e9b829b403
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Like the Asus T100TA the Asus T100TAF has a camera LED which is always
on by default and both also use the same GPIO for the LED.
Relax the DMI match for the Asus T100TA so that it also matches
the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220710173658.221528-1-hdegoede@redhat.com
|
|
It's easier to maintain the sorted table.
Keep the sorting order in sync with one in drivers/acpi/scan.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use more natural while (i--) patter to clean up allocated resources.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Drop duplicate print of returned value in the messages and use pattern
return dev_err_probe(...) where it's possible.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The device_get_match_data() checks for firmware node to be present,
there is no need to check for ACPI companion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220709211653.18938-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Instead of calling specific resource counter, let just probe each
of the type and see what it says. Return -ENOENT if no resources
found.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220709211653.18938-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A recent suggested change to the IFS code has shown that the userspace
API needs a bit more work, see:
https://lore.kernel.org/platform-driver-x86/20220708151938.986530-1-jithu.joseph@intel.com/
Mark it as BROKEN before 5.19 ships, to give ourselves one more
kernel-devel cycle to get the userspace API right.
Link: https://lore.kernel.org/platform-driver-x86/20220708151938.986530-1-jithu.joseph@intel.com/
Cc: Jithu Joseph <jithu.joseph@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220710140736.6492-1-hdegoede@redhat.com
|
|
On laptops like ASUS TUF Gaming A15, which have hotkeys to start Armoury
Crate or AURA Sync, these hotkeys are unavailable. This patch add
mappings for them.
Signed-off-by: Misaka19465 <misaka19465@olddoctor.net>
Link: https://lore.kernel.org/r/20220710113727.281634-1-misaka19465@olddoctor.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 98f30d0ecf79 ("ACPI: power: Switch to sys-off handler API")
switched the ACPI sleep code from directly setting the old global
pm_power_off handler to using the new register_sys_off_handler()
mechanism with a priority of SYS_OFF_PRIO_FIRMWARE.
This is a problem when the old global pm_power_off handler would later
be overwritten, such as done by the late_initcall(efi_shutdown_init):
if (efi_poweroff_required())
pm_power_off = efi_power_off;
The old global pm_power_off handler gets run with a priority of
SYS_OFF_PRIO_DEFAULT which is lower then SYS_OFF_PRIO_FIRMWARE, causing
acpi_power_off() to run first, changing the behavior from before
the ACPI sleep code switched to the new register_sys_off_handler().
Switch the registering of efi_power_off over to register_sys_off_handler()
with a priority of SYS_OFF_PRIO_FIRMWARE + 1 so that it will run before
acpi_power_off() as before.
Note since the new sys-off-handler code will try all handlers in
priority order, there is no more need for the EFI code to store and
call the original pm_power_off handler.
Fixes: 98f30d0ecf79 ("ACPI: power: Switch to sys-off handler API")
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220708131412.81078-3-hdegoede@redhat.com
|
|
Commit 98f30d0ecf79 ("ACPI: power: Switch to sys-off handler API")
switched the ACPI sleep code from directly setting the old global
pm_power_off handler to using the new register_sys_off_handler()
mechanism with a priority of SYS_OFF_PRIO_FIRMWARE.
This is a problem in special cases where the old global pm_power_off
handler later gets overwritten, such as the Lenovo Tab2 poweroff bugfix
in x86-android-tablets. The old global pm_power_off handler gets run
with a priority of SYS_OFF_PRIO_DEFAULT which is lower then
SYS_OFF_PRIO_FIRMWARE, causing the troublesome ACPI poweroff (which
freezes the system) to run first.
Switch the registering of lenovo_yoga_tab2_830_1050_power_off over to
register_sys_off_handler() with a priority of SYS_OFF_PRIO_FIRMWARE + 1
so that it will run before acpi_power_off() to fix this.
Fixes: 98f30d0ecf79 ("ACPI: power: Switch to sys-off handler API")
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220708131412.81078-2-hdegoede@redhat.com
|
|
Add support for the B660I AORUS PRO DDR4.
Signed-off-by: Pär Eriksson <parherman@gmail.com>
Link: https://lore.kernel.org/r/20220705184407.14181-1-parherman@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMC driver can be supported on a new upcoming platform.
Add this information to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
New version of PMC controller will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add PCI error recovery support for Intel PMT driver to recover
from PCI fatal errors
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: David E Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-5-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use the telem_type and the fixed block guid to determine if an entry is a
fixed region. For certain platforms we don't support this.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-4-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
Andy Shevchenko
Xin Gao
Maximilian Luz
Dan Carpenter
Vadim Pasternak
Hans de Goede
Andrey Strachuk
PaddyKP_Yao
Lukas Bulwahn
Henning Schild
Tan Jui Nee
Jonathan Yong
Misaka19465
Pär Eriksson
Shyam Sundar S K
Gayatri Kammela
David E. Box