aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-01-04i40e: fix use-after-free in i40e_sync_filters_subtask()Di Zhu1-0/+24
Using ifconfig command to delete the ipv6 address will cause the i40e network card driver to delete its internal mac_filter and i40e_service_task kernel thread will concurrently access the mac_filter. These two processes are not protected by lock so causing the following use-after-free problems. print_address_description+0x70/0x360 ? vprintk_func+0x5e/0xf0 kasan_report+0x1b2/0x330 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e] i40e_sync_filters_subtask+0xe3/0x130 [i40e] i40e_service_task+0x195/0x24c0 [i40e] process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 ? process_one_work+0x7d0/0x7d0 kthread+0x1c3/0x1f0 ? kthread_park+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 2279810: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0xf3/0x1e0 i40e_add_filter+0x127/0x2b0 [i40e] i40e_add_mac_filter+0x156/0x190 [i40e] i40e_addr_sync+0x2d/0x40 [i40e] __hw_addr_sync_dev+0x154/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_add+0x6c/0x90 igmp6_group_added+0x214/0x230 __ipv6_dev_mc_inc+0x338/0x4f0 addrconf_join_solict.part.7+0xa2/0xd0 addrconf_dad_work+0x500/0x980 process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 kthread+0x1c3/0x1f0 ret_from_fork+0x35/0x40 Freed by task 2547073: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1b0 __i40e_del_filter+0xa3/0xf0 [i40e] i40e_del_mac_filter+0xf3/0x130 [i40e] i40e_addr_unsync+0x85/0xa0 [i40e] __hw_addr_sync_dev+0x9d/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_del+0x69/0x80 igmp6_group_dropped+0x279/0x510 __ipv6_dev_mc_dec+0x174/0x220 addrconf_leave_solict.part.8+0xa2/0xd0 __ipv6_ifa_notify+0x4cd/0x570 ipv6_ifa_notify+0x58/0x80 ipv6_del_addr+0x259/0x4a0 inet6_addr_del+0x188/0x260 addrconf_del_ifaddr+0xcc/0x130 inet6_ioctl+0x152/0x190 sock_do_ioctl+0xd8/0x2b0 sock_ioctl+0x2e5/0x4c0 do_vfs_ioctl+0x14e/0xa80 ksys_ioctl+0x7c/0xa0 __x64_sys_ioctl+0x42/0x50 do_syscall_64+0x98/0x2c0 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Di Zhu <zhudi2@huawei.com> Signed-off-by: Rui Zhang <zhangrui182@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04i40e: Fix to not show opcode msg on unsuccessful VF MAC changeMateusz Palczewski1-8/+32
Hide i40e opcode information sent during response to VF in case when untrusted VF tried to change MAC on the VF interface. This is implemented by adding an additional parameter 'hide' to the response sent to VF function that hides the display of error information, but forwards the error code to VF. Previously it was not possible to send response with some error code to VF without displaying opcode information. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_meshPavel Skripkin3-81/+54
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: initialize variable have_higher_than_11mbitTom Rix1-1/+1
Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04sch_qfq: prevent shift-out-of-bounds in qfq_init_qdiscEric Dumazet1-4/+2
tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04netrom: fix copying in user data in nr_setsockoptChristoph Hellwig1-1/+1
This code used to copy in an unsigned long worth of data before the sockptr_t conversion, so restore that. Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04udp6: Use Segment Routing Header for dest address if presentAndrew Lunn2-1/+21
When finding the socket to report an error on, if the invoking packet is using Segment Routing, the IPv6 destination address is that of an intermediate router, not the end destination. Extract the ultimate destination address from the segment address. This change allows traceroute to function in the presence of Segment Routing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04icmp: ICMPV6: Examine invoking packet for Segment Route Headers.Andrew Lunn4-1/+38
RFC8754 says: ICMP error packets generated within the SR domain are sent to source nodes within the SR domain. The invoking packet in the ICMP error message may contain an SRH. Since the destination address of a packet with an SRH changes as each segment is processed, it may not be the destination used by the socket or application that generated the invoking packet. For the source of an invoking packet to process the ICMP error message, the ultimate destination address of the IPv6 header may be required. The following logic is used to determine the destination address for use by protocol-error handlers. * Walk all extension headers of the invoking IPv6 packet to the routing extension header preceding the upper-layer header. - If routing header is type 4 Segment Routing Header (SRH) o The SID at Segment List[0] may be used as the destination address of the invoking packet. Mangle the skb so the network header points to the invoking packet inside the ICMP packet. The seg6 helpers can then be used on the skb to find any segment routing headers. If found, mark this fact in the IPv6 control block of the skb, and store the offset into the packet of the SRH. Then restore the skb back to its old state. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04seg6: export get_srh() for ICMP handlingAndrew Lunn3-31/+32
An ICMP error message can contain in its message body part of an IPv6 packet which invoked the error. Such a packet might contain a segment router header. Export get_srh() so the ICMP code can make use of it. Since his changes the scope of the function from local to global, add the seg6_ prefix to keep the namespace clean. And move it into seg6.c so it is always available, not just when IPV6_SEG6_LWTUNNEL is enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"Florian Fainelli1-2/+2
This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") since it prevents any system that uses a fixed PHY without a GPIO descriptor from properly working: [ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY [ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22 [ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY [ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22 Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03ipv6: Do cleanup if attribute validation fails in multipath routeDavid Ahern1-5/+3
As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03ipv6: Continue processing multipath route even if gateway attribute is invalidDavid Ahern1-2/+5
ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02net/fsl: Remove leftover definition in xgmac_mdioMarkus Koch1-1/+0
commit 26eee0210ad7 ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in the QorIQ mdio driver but left the (now unused) incorrect bit definition for MDIO_DATA_BSY in the code. This commit removes it. Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02rndis_host: support Hytera digital radiosThomas Toye1-0/+5
Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye <thomas@toye.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02sctp: hold endpoint before calling cb in sctp_transport_lookup_processXin Long3-34/+37
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint") is also needed for dumping one asoc and sock after the lookup. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: ena: Fix error handling when calculating max IO queues numberArthur Kiyanovski1-4/+0
The role of ena_calc_max_io_queue_num() is to return the number of queues supported by the device, which means the return value should be >=0. The function that calls ena_calc_max_io_queue_num(), checks the return value. If it is 0, it means the device reported it supports 0 IO queues. This case is considered an error and is handled by the calling function accordingly. However the current implementation of ena_calc_max_io_queue_num() is wrong, since when it detects the device supports 0 IO queues, it returns -EFAULT. In such a case the calling function doesn't detect the error, and therefore doesn't handle it. This commit changes ena_calc_max_io_queue_num() to return 0 in case the device reported it supports 0 queues, allowing the calling function to properly handle the error case. Fixes: 736ce3f414cc ("net: ena: make ethtool -l show correct max number of queues") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: ena: Fix wrong rx request id by resetting deviceArthur Kiyanovski1-2/+9
A wrong request id received from the device is a sign that something is wrong with it, therefore trigger a device reset. Also add some debug info to the "Page is NULL" print to make it easier to debug. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: ena: Fix undefined state when tx request id is out of boundsArthur Kiyanovski1-14/+20
ena_com_tx_comp_req_id_get() checks the req_id of a received completion, and if it is out of bounds returns -EINVAL. This is a sign that something is wrong with the device and it needs to be reset. The current code does not reset the device in this case, which leaves the driver in an undefined state, where this completion is not properly handled. This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq() and ena_clean_xdp_irq() which resets the device to fix the issue. This commit also removes unnecessary request id checks from validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded because it was already performed in ena_com_tx_comp_req_id_get(), which is called right before these functions. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02mctp: Remove only static neighbour on RTM_DELNEIGHGagan Kumar1-4/+5
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of only static neighbours. This should be a no-op change and might be useful later when mctp can have MCTP_NEIGH_DISCOVER neighbours. Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02batman-adv: mcast: don't send link-local multicast to mcast routersLinus Lüssing3-11/+21
The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-12-31net ticp:fix a kernel-infoleak in __tipc_sendmsg()Haimin Zhang1-0/+2
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently copying it to user space,causing kernel-infoleak. BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287 move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287 __sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757 __sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: msg_set_word net/tipc/msg.h:212 [inline] msg_set_destport net/tipc/msg.h:619 [inline] msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486 msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486 __tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409 sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409 ____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] ___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492 __sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499 __se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499 __x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Local variable skaddr created at: __tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 Bytes 4-7 of 16 are uninitialized Memory access of size 16 starts at ffff888113753e00 Data copied to user address 0000000020000280 Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31selftests: net: udpgro_fwd.sh: explicitly checking the available ping featureJianguo Wu1-1/+2
As Paolo pointed out, the result of ping IPv6 address depends on the running distro. So explicitly checking the available ping feature, as e.g. do the bareudp.sh self-tests. Fixes: 8b3170e07539 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31lwtunnel: Validate RTA_ENCAP_TYPE attribute lengthDavid Ahern3-0/+11
lwtunnel_valid_encap_type_attr is used to validate encap attributes within a multipath route. Add length validation checking to the type. lwtunnel_valid_encap_type_attr is called converting attributes to fib{6,}_config struct which means it is used before fib_get_nhs, ip6_route_multipath_add, and ip6_route_multipath_del - other locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE attribute. Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv6: Check attribute length for RTA_GATEWAY when deleting multipath routeDavid Ahern1-1/+5
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv6: Check attribute length for RTA_GATEWAY in multipath routeDavid Ahern1-1/+20
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv4: Check attribute length for RTA_FLOW in multipath routeDavid Ahern1-3/+14
Make sure RTA_FLOW is at least 4B before using. Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv4: Check attribute length for RTA_GATEWAY in multipath routeDavid Ahern1-3/+26
syzbot reported uninit-value: ============================================================ BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453 fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224 inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886 Add helper to validate RTA_GATEWAY length before using the attribute. Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config") Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30fsl/fman: Fix missing put_device() call in fman_port_probeMiaoqian Lin1-5/+7
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the and error handling paths. Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30selftests: net: using ping6 for IPv6 in udpgro_fwd.shJianguo Wu1-1/+3
udpgro_fwd.sh output following message: ping: 2001:db8:1::100: Address family for hostname not supported Using ping6 when pinging IPv6 addresses. Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30Documentation: fix outdated interpretation of ip_no_pmtu_discxu xin1-2/+4
The updating way of pmtu has changed, but documentation is still in the old way. So this patch updates the interpretation of ip_no_pmtu_disc and min_pmtu. See commit 28d35bcdd3925 ("net: ipv4: don't let PMTU updates increase route MTU") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net/ncsi: check for error return from call to nla_put_u32Jiasheng Jiang1-1/+5
As we can see from the comment of the nla_put() that it could return -EMSGSIZE if the tailroom of the skb is insufficient. Therefore, it should be better to check the return value of the nla_put_u32 and return the error code if error accurs. Also, there are many other functions have the same problem, and if this patch is correct, I will commit a new version to fix all. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helperNikolay Aleksandrov1-3/+3
We need to first check if the context is a vlan one, then we need to check the global bridge multicast vlan snooping flag, and finally the vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast processing (e.g. querier timers). Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: fix use-after-free in tw_timer_handlerMuchun Song1-6/+4
A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1 Fixes: 61a7e26028b9 ("mib: put net statistics on struct net") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29selftests: net: Fix a typo in udpgro_fwd.shJianguo Wu1-1/+1
$rvs -> $rcv Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Link: https://lore.kernel.org/r/d247d7c8-a03a-0abf-3c71-4006a051d133@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29selftests/net: udpgso_bench_tx: fix dst ip argumentwujianguo1-1/+7
udpgso_bench_tx call setup_sockaddr() for dest address before parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}", then ${dst_port} will be ignored, and using default cfg_port 8000. This will cause test case "multiple GRO socks" failed in udpgro.sh. Setup sockaddr after parsing all arguments. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: add and enforce startup query interval minimumNikolay Aleksandrov5-3/+22
As reported[1] if startup query interval is set too low in combination with large number of startup queries and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the admin know that the startup interval has been set to the minimum. It doesn't make sense to make the startup interval lower than the normal query interval so use the same value of 1 second. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: add and enforce query interval minimumNikolay Aleksandrov5-3/+22
As reported[1] if query interval is set too low and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the administrator know that the interval has been set to the minimum. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29ipv6: raw: check passed optlen before readingTamir Duberstein1-0/+3
Add a check that the user-provided option is at least as long as the number of bytes we intend to read. Before this patch we would blindly read sizeof(int) bytes even in cases where the user passed optlen<sizeof(int), which would potentially read garbage or fault. Discovered by new tests in https://github.com/google/gvisor/pull/6957 . The original get_user call predates history in the git repo. Signed-off-by: Tamir Duberstein <tamird@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29xsk: Initialise xskb free_list_nodeCiara Loftus1-0/+1
This commit initialises the xskb's free_list_node when the xskb is allocated. This prevents a potential false negative returned from a call to list_empty for that node, such as the one introduced in commit 199d983bc015 ("xsk: Fix crash on double free in buffer pool") In my environment this issue caused packets to not be received by the xdpsock application if the traffic was running prior to application launch. This happened when the first batch of packets failed the xskmap lookup and XDP_PASS was returned from the bpf program. This action is handled in the i40e zc driver (and others) by allocating an skbuff, freeing the xdp_buff and adding the associated xskb to the xsk_buff_pool's free_list if it hadn't been added already. Without this fix, the xskb is not added to the free_list because the check to determine if it was added already returns an invalid positive result. Later, this caused allocation errors in the driver and the failure to receive packets. Fixes: 199d983bc015 ("xsk: Fix crash on double free in buffer pool") Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API") Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28net/mlx5e: Fix wrong features assignment in case of errorGal Pressman1-6/+5
In case of an error in mlx5e_set_features(), 'netdev->features' must be updated with the correct state of the device to indicate which features were updated successfully. To do that we maintain a copy of 'netdev->features' and update it after successful feature changes, so we can assign it to back to 'netdev->features' if needed. However, since not all netdev features are handled by the driver (e.g. GRO/TSO/etc), some features may not be updated correctly in case of an error updating another feature. For example, while requesting to disable TSO (feature which is not handled by the driver) and enable HW-GRO, if an error occurs during HW-GRO enable, 'oper_features' will be assigned with 'netdev->features' and HW-GRO turned off. TSO will remain enabled in such case, which is a bug. To solve that, instead of using 'netdev->features' as the baseline of 'oper_features' and changing it on set feature success, use 'features' instead and update it in case of errors. Fixes: 75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-28net/mlx5e: TC, Fix memory leak with rules with internal portRoi Dayan1-0/+2
Fix a memory leak with decap rule with internal port as destination device. The driver allocates a modify hdr action but doesn't set the flow attr modify hdr action which results in skipping releasing the modify hdr action when releasing the flow. backtrace: [<000000005f8c651c>] krealloc+0x83/0xd0 [<000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core] [<000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core] [<00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core] [<0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core] [<00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core] [<00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core] [<000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core] [<00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420 Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-28ionic: Initialize the 'lif->dbid_inuse' bitmapChristophe JAILLET1-1/+1
When allocated, this bitmap is not initialized. Only the first bit is set a few lines below. Use bitmap_zalloc() to make sure that it is cleared before being used. Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28igc: Fix TX timestamp support for non-MSI-X platformsJames McLaughlin1-0/+6
Time synchronization was not properly enabled on non-MSI-X platforms. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28igc: Do not enable crosstimestamping for i225-V modelsVinicius Costa Gomes1-1/+14
It was reported that when PCIe PTM is enabled, some lockups could be observed with some integrated i225-V models. While the issue is investigated, we can disable crosstimestamp for those models and see no loss of functionality, because those models don't have any support for time synchronization. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/ Reported-by: Stefan Dietrich <roots@gmx.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28net/smc: fix kernel panic caused by race of smc_sockDust Li8-76/+57
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. Fixes: 5f08318f617b ("smc: connection data control (CDC)") Reported-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28net/smc: don't send CDC/LLC message if link not readyDust Li5-5/+11
We found smc_llc_send_link_delete_all() sometimes wait for 2s timeout when testing with RDMA link up/down. It is possible when a smc_link is in ACTIVATING state, the underlaying QP is still in RESET or RTR state, which cannot send any messages out. smc_llc_send_link_delete_all() use smc_link_usable() to checks whether the link is usable, if the QP is still in RESET or RTR state, but the smc_link is in ACTIVATING, this LLC message will always fail without any CQE entering the CQ, and we will always wait 2s before timeout. Since we cannot send any messages through the QP before the QP enter RTS. I add a wrapper smc_link_sendable() which checks the state of QP along with the link state. And replace smc_link_usable() with smc_link_sendable() in all LLC & CDC message sending routine. Fixes: 5f08318f617b ("smc: connection data control (CDC)") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28NFC: st21nfca: Fix memory leak in device probe and removeWei Yongjun1-9/+20
'phy->pending_skb' is alloced when device probe, but forgot to free in the error handling path and remove path, this cause memory leak as follows: unreferenced object 0xffff88800bc06800 (size 512): comm "8", pid 11775, jiffies 4295159829 (age 9.032s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450 [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0 [<000000005fea522c>] __alloc_skb+0x124/0x380 [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2 Fix it by freeing 'pending_skb' in error and remove. Fixes: 68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28net: lantiq_xrx200: fix statistics of received bytesAleksander Jan Bajkowski1-1/+1
Received frames have FCS truncated. There is no need to subtract FCS length from the statistics. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28net: ag71xx: Fix a potential double free in error handling pathsChristophe JAILLET1-15/+8
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there is no need to call free_netdev() explicitly or there will be a double free(). Simplify all error handling paths accordingly. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28mISDN: change function names to avoid conflictswolfgang huang3-7/+7
As we build for mips, we meet following error. l1_init error with multiple definition. Some architecture devices usually marked with l1, l2, lxx as the start-up phase. so we change the mISDN function names, align with Isdnl2_xxx. mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init': (.text+0x890): multiple definition of `l1_init'; \ arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1 Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn> Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.