aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18xhci: Workaround to get Intel xHCI reset working more reliablyRajmohan Mani1-0/+10
Existing Intel xHCI controllers require a delay of 1 mS, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 5000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-18usb: chipidea: imx: fix a possible NULL dereferenceLABBE Corentin1-3/+8
of_match_device could return NULL, and so cause a NULL pointer dereference later. Reported-by: coverity (CID 1324138) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18usb: chipidea: usbmisc_imx: fix a possible NULL dereferenceLABBE Corentin1-4/+6
of_match_device could return NULL, and so cause a NULL pointer dereference later. Renaming tmp_dev to of_id (like all others do) in the process. Reported-by: coverity (CID 1324135) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18usb: chipidea: otg: gadget module load and unload supportLi Jun1-0/+17
This patch is to support load and unload gadget driver in full OTG mode. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Jiada Wang <jiada_wang@mentor.com> Cc: <stable@vger.kernel.org> #v4.0+
2015-11-18usb: chipidea: debug: disable usb irq while role switchLi Jun1-0/+2
Since the ci->role will be set after the host role start is complete, there will be nobody cared irq during start host if usb irq enabled. This error can be reproduced on i.mx6 sololite EVK board by: 1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1 in dts. 2. boot up the board with ID cable and usb device connected. 3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role 4. echo host > /sys/kernel/debug/ci_hdrc.0/role 5. irq 212: nobody cared. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18ARM: dts: imx27.dtsi: change the clock information for usbPeter Chen1-4/+12
For imx27, it needs three clocks to let the controller work, the old code is wrong, and usbmisc has not included clock handling code any more. Without this patch, it will cause below data abort when accessing usbmisc registers. usbcore: registered new interface driver usb-storage Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600 pgd = c0004000 [f4424600] *pgd=10000452(bad) Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089 Hardware name: Freescale i.MX27 (Device Tree Support) task: c7832b60 ti: c783e000 task.ti: c783e000 PC is at usbmisc_imx27_init+0x4c/0xbc LR is at usbmisc_imx27_init+0x40/0xbc pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093 sp : c783fe08 ip : 00000000 fp : 00000000 r10: c0576434 r9 : 0000009c r8 : c7a773a0 r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0 r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc783e190) Stack: (0xc783fe08 to 0xc7840000) Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+ Acked-by: Shawn Guo <shawnguo@kernel.org>
2015-11-18usb: chipidea: imx: refine clock operations to adapt for all platformsPeter Chen1-18/+113
Some i.mx platforms need three clocks to let controller work, but others only need one, refine clock operation to adapt for all platforms, it fixes a regression found at i.mx27. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+
2015-11-17usb: gadget: atmel_usba_udc: Expose correct device speedDouglas Gilbert1-1/+1
Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> #4.0+ Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: musb: enable usb_dma parameterBin Liu1-1/+1
Change the permission of usb_dma parameter so it can be used for runtime debug without reboot. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: phy: phy-mxs-usb: fix a possible NULL dereferenceLABBE Corentin1-2/+5
of_match_device could return NULL, and so cause a NULL pointer dereference later. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: dwc3: gadget: let us set lower max_speedBen McCauley1-1/+23
In some SoCs, dwc3 is implemented as a USB2.0 only core, meaning that it can't ever achieve SuperSpeed. Currect driver always sets gadget.max_speed to USB_SPEED_SUPER unconditionally. This can causes issues to some Host stacks where the host will issue a GetBOS() request and we will reply with a BOS containing Superspeed Capability Descriptor. At least Windows seems to be upset by this fact and prints a warning that we should connect $this device to another port. [ balbi@ti.com : rewrote entire commit, including source code comment to make a lot clearer what the problem is ] Cc: <stable@vger.kernel.org> Signed-off-by: Ben McCauley <ben.mccauley@garmin.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: musb: fix tx fifo flush handlingBin Liu1-6/+16
Here are a few changes in musb_h_tx_flush_fifo(). - It has been observed that sometimes (if not always) musb is unable to flush tx fifo during urb dequeue when disconnect a device. But it seems to be harmless, since the tx fifo flush is done again in musb_ep_program() when re-use the hw_ep. But the WARN() floods the console in the case when multiple tx urbs are queued, so change it to dev_WARN_ONCE(). - applications could queue up many tx urbs, then the 1ms delay could causes minutes of delay in device disconnect. So remove it to get better user experience. The 1ms delay does not help the flushing anyway. - cleanup the debug code - related to lastcsr. ---- Note: The tx fifo flush issue has been observed during device disconnect on AM335x. To reproduce the issue, ensure tx urb(s) are queued when unplug the usb device which is connected to AM335x usb host port. I found using a usb-ethernet device and running iperf (client on AM335x) has very high chance to trigger the problem. Better to turn on dev_dbg() in musb_cleanup_urb() with CPPI enabled to see the issue when aborting the tx channel. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: gadget: f_loopback: fix the warning during the enumerationPeter Chen1-1/+1
The current code tries to allocate memory with GFP_KERNEL at interrupt context, it would show below warning during the enumeration when I test it with chipidea hardware, change GFP flag as GFP_ATOMIC can fix this issue. [ 40.438237] zero gadget: high-speed config #2: loopback [ 40.444924] ------------[ cut here ]------------ [ 40.449609] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x108/0x128() [ 40.461715] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 40.467130] Modules linked in: [ 40.470216] usb_f_ss_lb g_zero libcomposite evbug [ 40.473822] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-rc5-00168-gb730aaf #604 [ 40.481496] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 40.487345] Backtrace: [ 40.489857] [<80014e94>] (dump_backtrace) from [<80015088>] (show_stack+0x18/0x1c) [ 40.497445] r6:80b67a80 r5:00000000 r4:00000000 r3:00000000 [ 40.503234] [<80015070>] (show_stack) from [<802e27b4>] (dump_stack+0x8c/0xa4) [ 40.510503] [<802e2728>] (dump_stack) from [<8002cfe8>] (warn_slowpath_common+0x80/0xbc) [ 40.518612] r6:8007510c r5:00000009 r4:80b49c88 r3:00000001 [ 40.524396] [<8002cf68>] (warn_slowpath_common) from [<8002d05c>] (warn_slowpath_fmt+0x38/0x40) [ 40.533109] r8:bcfdef80 r7:bdb705cc r6:000080d0 r5:be001e80 r4:809cc278 [ 40.539965] [<8002d028>] (warn_slowpath_fmt) from [<8007510c>] (lockdep_trace_alloc+0x108/0x128) [ 40.548766] r3:809d0128 r2:809cc278 [ 40.552401] r4:600b0193 [ 40.554990] [<80075004>] (lockdep_trace_alloc) from [<801093d4>] (kmem_cache_alloc+0x28/0x15c) [ 40.563618] r4:000080d0 r3:80b4aa8c [ 40.567270] [<801093ac>] (kmem_cache_alloc) from [<804d95e4>] (ep_alloc_request+0x58/0x68) [ 40.575550] r10:7f01f104 r9:00000001 r8:bcfdef80 r7:bdb705cc r6:bc178700 r5:00000000 [ 40.583512] r4:bcfdef80 r3:813c0a38 [ 40.587183] [<804d958c>] (ep_alloc_request) from [<7f01f7ec>] (loopback_set_alt+0x114/0x21c [usb_f_ss_lb]) [ 40.596929] [<7f01f6d8>] (loopback_set_alt [usb_f_ss_lb]) from [<7f006910>] (composite_setup+0xbd0/0x17e8 [libcomposite]) [ 40.607902] r10:bd3a2c0c r9:00000000 r8:bcfdef80 r7:bc178700 r6:bdb702d0 r5:bcfdefdc [ 40.615866] r4:7f0199b4 r3:00000002 [ 40.619542] [<7f005d40>] (composite_setup [libcomposite]) from [<804dae88>] (udc_irq+0x784/0xd1c) [ 40.628431] r10:80bb5619 r9:c0876140 r8:00012001 r7:bdb71010 r6:bdb70568 r5:00010001 [ 40.636392] r4:bdb70014 [ 40.638985] [<804da704>] (udc_irq) from [<804d64f8>] (ci_irq+0x5c/0x118) [ 40.645702] r10:80bb5619 r9:be11e000 r8:00000117 r7:00000000 r6:bdb71010 r5:be11e060 [ 40.653666] r4:bdb70010 [ 40.656261] [<804d649c>] (ci_irq) from [<8007f638>] (handle_irq_event_percpu+0x7c/0x13c) [ 40.664367] r6:00000000 r5:be11e060 r4:bdb05cc0 r3:804d649c [ 40.670149] [<8007f5bc>] (handle_irq_event_percpu) from [<8007f740>] (handle_irq_event+0x48/0x6c) [ 40.679036] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:bdb05cc0 r5:be11e060 [ 40.686998] r4:be11e000 [ 40.689581] [<8007f6f8>] (handle_irq_event) from [<80082850>] (handle_fasteoi_irq+0xd4/0x1b0) [ 40.698120] r6:80b56a30 r5:be11e060 r4:be11e000 r3:00000000 [ 40.703898] [<8008277c>] (handle_fasteoi_irq) from [<8007ec04>] (generic_handle_irq+0x28/0x3c) [ 40.712524] r7:00000000 r6:80b4aaf4 r5:00000117 r4:80b445fc [ 40.718304] [<8007ebdc>] (generic_handle_irq) from [<8007ef20>] (__handle_domain_irq+0x6c/0xe8) [ 40.727033] [<8007eeb4>] (__handle_domain_irq) from [<800095d4>] (gic_handle_irq+0x48/0x94) [ 40.735402] r9:c080f100 r8:80b4ac6c r7:c080e100 r6:80b67d40 r5:80b49f00 r4:c080e10c [ 40.743290] [<8000958c>] (gic_handle_irq) from [<80015d38>] (__irq_svc+0x58/0x78) [ 40.750791] Exception stack(0x80b49f00 to 0x80b49f48) [ 40.755873] 9f00: 00000001 00000001 00000000 80024320 80b48000 80b4a9d0 80b4a984 80b433e4 [ 40.764078] 9f20: 00000001 807f4680 00000000 80b49f5c 80b49f20 80b49f50 80071ca4 800113fc [ 40.772272] 9f40: 200b0013 ffffffff [ 40.775776] r9:807f4680 r8:00000001 r7:80b49f34 r6:ffffffff r5:200b0013 r4:800113fc [ 40.783677] [<800113d4>] (arch_cpu_idle) from [<8006c5bc>] (default_idle_call+0x28/0x38) [ 40.791798] [<8006c594>] (default_idle_call) from [<8006c6dc>] (cpu_startup_entry+0x110/0x1b0) [ 40.800445] [<8006c5cc>] (cpu_startup_entry) from [<807e95dc>] (rest_init+0x12c/0x168) [ 40.808376] r7:80b4a8c0 r3:807f4b7c [ 40.812030] [<807e94b0>] (rest_init) from [<80ad7cc0>] (start_kernel+0x360/0x3d4) [ 40.819528] r5:80bcb000 r4:80bcb050 [ 40.823171] [<80ad7960>] (start_kernel) from [<8000807c>] (0x8000807c) It fixes commit 91c42b0da8e3 ("usb: gadget: loopback: Fix looping back logic implementation"). Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: dwc2: host: Fix remote wakeup when not in DWC2_L2Douglas Anderson1-4/+5
In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") we changed dwc2_port_suspend() not to set the lx_state anymore (instead it sets the new bus_suspended variable). This introduced a bug where we would fail to detect device insertions if: 1. Plug empty hub into dwc2 2. Plug USB flash drive into the empty hub. 3. Wait a few seconds 4. Unplug USB flash drive 5. Less than 2 seconds after step 4, plug the USB flash drive in again. The dwc2_hcd_rem_wakeup() function should have been changed to look at the new bus_suspended variable. Let's fix it. Since commit b46146d59fda ("usb: dwc2: host: resume root hub on remote wakeup") talks about needing the root hub resumed if the bus was suspended, we'll include it in our test. It appears that the "port_l1_change" should only be set to 1 if we were in DWC2_L1 (the driver currently never sets this), so we'll update the former "else" case based on this test. Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Gregory Herrero <gregory.herrero@intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-17usb: dwc2: host: Fix ahbcfg for rk3066Douglas Anderson1-1/+2
The comment for ahbcfg for rk3066 parameters (also used for rk3288) claimed that ahbcfg was INCR16, but it wasn't. Since the bits weren't shifted properly, the 0x7 ended up being masked and we ended up programming 0x3 for the HBstLen. Let's set it to INCR16 properly. As per Wu Liang Feng at Rockchip this may increase transmission efficiency. I did blackbox tests with writing 0s to a USB-based SD reader (forcefully capping CPU Freq to try to measure efficiency): cd /sys/devices/system/cpu/cpu0/cpufreq echo userspace > scaling_governor echo 126000 > scaling_setspeed for i in $(seq 10); do dd if=/dev/zero of=/dev/sdb bs=1M count=750 done With the above tests I found that speeds went from ~15MB/s to ~18MB/s. Note that most other tests I did (including reading from the same USB reader) didn't show any difference in performance. Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: John Youn <johnyoun@synopsys.com> Reviewed-by: Liangfeng Wu <wulf@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-16usb: phy: omap-otg: fix uninitialized pointerAaro Koskinen1-1/+1
otg_dev->extcon was referenced before otg_dev was initialized. Fix. Cc: <stable@vger.kernel.org> # v4.3 Fixes: a2fd2423240f ("usb: phy: omap-otg: Replace deprecated API of extcon") Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-16usb: musb: core: fix order of arguments to ulpi write callbackUwe Kleine-König1-5/+5
There is a bit of a mess in the order of arguments to the ulpi write callback. There is int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) in drivers/usb/common/ulpi.c; struct usb_phy_io_ops { ... int (*write)(struct usb_phy *x, u32 val, u32 reg); } in include/linux/usb/phy.h. The callback registered by the musb driver has to comply to the latter, but up to now had "offset" first which effectively made the function broken for correct users. So flip the order and while at it also switch to the parameter names of struct usb_phy_io_ops's write. Fixes: ffb865b1e460 ("usb: musb: add ulpi access operations") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-16usb: dwc3: pci: add support for Intel Broxton SOCHeikki Krogerus1-0/+4
PCI IDs for Broxton based platforms. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-15Linux 4.4-rc1Linus Torvalds1-2/+2
2015-11-14ARC: Fix silly typo in MAINTAINERS fileVineet Gupta1-1/+1
2015-11-14ARC: cpu_relax() to be compiler barrier even for UPVineet Gupta1-4/+0
cpu_relax() on ARC has been barrier only for SMP (and no-op for UP). Per recent discussions, it is safer to make it a compiler barrier unconditionally. Link: http://lkml.kernel.org/r/53A7D3AA.9020100@synopsys.com Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: use ASL assembler mnemonicVineet Gupta1-3/+3
ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: [arcompact] Handle bus error from userspace as Interrupt not exceptionVineet Gupta3-21/+44
Bus errors from userspace on ARCompact based cores are handled by core as a high priority L2 interrupt but current code treated it as interrupt Handling an interrupt like exception is certainly not going to go unnoticed. (and it worked so far as we never saw a Bus error from userspace until IPPK guys tested a DDR controller with ECC error detection etc hence needed to explicitly trigger/handle such errors) - So move mem_service exception handler from common code into ARCv2 code. - In ARCompact code, define mem_service as L2 interrupt handler which just drops down to pure kernel mode and goes of to enqueue SIGBUS Reported-by: Nelson Pereira <npereira@synopsys.com> Tested-by: Ana Martins <amartins@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-14ARC: remove extraneous header includeVineet Gupta1-1/+0
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-11-13f2fs: xattr simplificationsAndreas Gruenbacher1-12/+3
Now that the xattr handler is passed to the xattr handler operations, we have access to the attribute name prefix, so simplify f2fs_xattr_generic_list. Also, f2fs_xattr_advise_list is only ever called for f2fs_xattr_advise_handler; there is no need to double check for that. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Changman Lee <cm224.lee@samsung.com> Cc: Chao Yu <chao2.yu@samsung.com> Cc: linux-f2fs-devel@lists.sourceforge.net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13squashfs: xattr simplificationsAndreas Gruenbacher1-59/+31
Now that the xattr handler is passed to the xattr handler operations, we have access to the attribute name prefix, so simplify the squashfs xattr handlers a bit. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-139p: xattr simplificationsAndreas Gruenbacher9-306/+83
Now that the xattr handler is passed to the xattr handler operations, we can use the same get and set operations for the user, trusted, and security xattr namespaces. In those namespaces, we can access the full attribute name by "reattaching" the name prefix the vfs has skipped for us. Add a xattr_full_name helper to make this obvious in the code. For the "system.posix_acl_access" and "system.posix_acl_default" attributes, handler->prefix is the full attribute name; the suffix is the empty string. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: v9fs-developer@lists.sourceforge.net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13xattr handlers: Pass handler to operations instead of flagsAndreas Gruenbacher32-226/+306
The xattr_handler operations are currently all passed a file system specific flags value which the operations can use to disambiguate between different handlers; some file systems use that to distinguish the xattr namespace, for example. In some oprations, it would be useful to also have access to the handler prefix. To allow that, pass a pointer to the handler to operations instead of the flags value alone. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13jffs2: Add missing capability check for listing trusted xattrsAndreas Gruenbacher1-0/+3
The vfs checks if a task has the appropriate access for get and set operations, but it cannot do that for the list operation; the file system must check for that itself. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13hfsplus: Remove unused xattr handler list operationsAndreas Gruenbacher4-44/+0
The list operations can never be called; they are even documented to be unused. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13ubifs: Remove unused security xattr handlerAndreas Gruenbacher3-42/+0
Ubifs installs a security xattr handler in sb->s_xattr but doesn't use the generic_{get,set,list,remove}xattr inode operations needed for processing this list of attribute handlers; the handler is never called. Instead, ubifs uses its own xattr handlers which also process security xattrs. Remove the dead code. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Richard Weinberger <richard@nod.at> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: linux-mtd@lists.infradead.org Cc: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13vfs: Fix the posix_acl_xattr_list return valueAndreas Gruenbacher1-3/+1
When a filesystem that contains POSIX ACLs is mounted without ACL support (-o noacl), the appropriate behavior is not to list any existing POSIX ACL xattrs. The return value for list xattr handlers in this case is 0, not an error code: several filesystems that use the POSIX ACL xattr handlers do not expect the list operation to fail. Symlinks cannot have ACLs, so posix_acl_xattr_list will never be called for symlinks in the first place. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13vfs: Check attribute names in posix acl xattr handersAndreas Gruenbacher1-0/+4
The get and set operations of the POSIX ACL xattr handlers failed to check the attribute names, so all names with "system.posix_acl_access" or "system.posix_acl_default" as a prefix were accepted. Reject invalid names from now on. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-12mpt3sas: fix inline markers on non inline function declarationsStephen Rothwell1-2/+2
After merging the scsi tree, today's linux-next build (powerpc allyesconfig) failed like this: In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done': drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here if (mpt3sas_scsi_direct_io_get(ioc, smid) && ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5 9:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ Presumably caused by commit c84b06a48c4d ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-12dax: fix __dax_pmd_fault crashDan Williams1-0/+7
Since 4.3 introduced devm_memremap_pages() the pfns handled by DAX may optionally have a struct page backing. When a mapped pfn reaches vmf_insert_pfn_pmd() it fails with a crash signature like the following: kernel BUG at mm/huge_memory.c:905! [..] Call Trace: [<ffffffff812a73ba>] __dax_pmd_fault+0x2ea/0x5b0 [<ffffffffa01a4182>] xfs_filemap_pmd_fault+0x92/0x150 [xfs] [<ffffffff811fbe02>] handle_mm_fault+0x312/0x1b50 Fix this by falling back to 4K mappings in the pfn_valid() case. Longer term, vmf_insert_pfn_pmd() needs to grow support for architectures that can provide a 'pmd_special' capability. Cc: <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-13Revert "drm/rockchip: Convert the probe function to the generic drm_of_component_probe()"Mark Yao1-6/+75
This reverts commit 52f5eb60940de889ce98a876f6933b574ead3225. Rockchip drm can't work with generic drm_of_component_probe now Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-13drm: Don't oops in drm_calc_timestamping_constants() if drm_vblank_init() wasn't calledVille Syrjälä1-1/+9
Seems the crtc helpers call drm_calc_timestamping_constants() unconditionally even if the driver didn't initialize vblank support by calling drm_vblank_init(). That used to be OK since the constants were stored under drm_crtc. However I broke this with commit eba1f35dfe14 ("drm: Move timestamping constants into drm_vblank_crtc") when I moved the constants to live inside the drm_vblank_crtc struct instead. If drm_vblank_init() isn't called, we don't allocate these structures, and so drm_calc_timestamping_constants() will oops. Fix it by adding a check into drm_calc_timestamping_constants() to see if vblank support was initialized at all. And to keep in line with other such checks, also toss in a check and warn for the case where vblank support was initialized, but the wrong number of crtcs was specified. Fixes the following sort of oops: BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 IP: [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] PGD 0 Oops: 0002 [#1] SMP Modules linked in: sr_mod cdrom mgag200(+) i2c_algo_bit drm_kms_helper ahci syscopyarea sysfillrect sysimgblt libahci fb_sys_fops bnx2x ttm tg3(+) mdio drm ptp sd_mod libata i2c_core pps_core libcrc32c hpsa dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 418 Comm: kworker/0:2 Not tainted 4.3.0+ #1 Hardware name: HP ProLiant DL380 Gen9, BIOS P89 06/09/2015 Workqueue: events work_for_cpu_fn task: ffff88046ca95500 ti: ffff88007830c000 task.ti: ffff88007830c000 RIP: 0010:[<ffffffffa014b266>] [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] RSP: 0018:ffff88007830f4e8 EFLAGS: 00010246 RAX: 0000000000fe4c00 RBX: ffff88006a849160 RCX: 0000000000000540 RDX: 0000000000000000 RSI: 000000000000fde8 RDI: ffff88006a849000 RBP: ffff88007830f518 R08: ffff88007830c000 R09: 00000001b87e3712 R10: 00000000000050c4 R11: 0000000000000000 R12: 0000000000fe4c00 R13: ffff88006a849000 R14: 0000000000000000 R15: 000000000000fde8 FS: 0000000000000000(0000) GS:ffff88046f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b0 CR3: 00000000019d6000 CR4: 00000000001406f0 Stack: ffff88007830f518 ffff88006a849000 ffff880c69b90340 ffff880c69b90000 ffff880c69b90348 ffff880c69b90340 ffff88007830f748 ffffffffa042f7e7 ffff88006a849090 0000000000000000 ffff88006a849160 0000000000000000 Call Trace: [<ffffffffa042f7e7>] drm_crtc_helper_set_mode+0x3d7/0x4b0 [drm_kms_helper] [<ffffffffa04307d4>] drm_crtc_helper_set_config+0x8d4/0xb10 [drm_kms_helper] [<ffffffffa01548d4>] drm_mode_set_config_internal+0x64/0x100 [drm] [<ffffffffa043c342>] drm_fb_helper_pan_display+0xa2/0x280 [drm_kms_helper] [<ffffffff81392c7b>] fb_pan_display+0xbb/0x170 [<ffffffff8138cf70>] bit_update_start+0x20/0x50 [<ffffffff8138b81b>] fbcon_switch+0x39b/0x590 [<ffffffff8140a3d0>] redraw_screen+0x1a0/0x240 [<ffffffff8140b30e>] do_bind_con_driver+0x2ee/0x310 [<ffffffff8140b651>] do_take_over_console+0x141/0x1b0 [<ffffffff81387377>] do_fbcon_takeover+0x57/0xb0 [<ffffffff8138c98b>] fbcon_event_notify+0x60b/0x750 [<ffffffff810a5599>] notifier_call_chain+0x49/0x70 [<ffffffff810a58dd>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810a5916>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8139282b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff81394881>] register_framebuffer+0x1f1/0x330 [<ffffffffa043d9aa>] drm_fb_helper_initial_config+0x27a/0x3d0 [drm_kms_helper] [<ffffffffa0469b4d>] mgag200_fbdev_init+0xdd/0xf0 [mgag200] [<ffffffffa0468586>] mgag200_modeset_init+0x176/0x1e0 [mgag200] [<ffffffffa0464659>] mgag200_driver_load+0x3f9/0x580 [mgag200] [<ffffffffa014e067>] drm_dev_register+0xa7/0xb0 [drm] [<ffffffffa015054f>] drm_get_pci_dev+0x8f/0x1e0 [drm] [<ffffffffa046937b>] mga_pci_probe+0x9b/0xc0 [mgag200] [<ffffffff813662d5>] local_pci_probe+0x45/0xa0 [<ffffffff8109afe4>] work_for_cpu_fn+0x14/0x20 [<ffffffff8109e13c>] process_one_work+0x14c/0x3c0 [<ffffffff8109eaa4>] worker_thread+0x244/0x470 [<ffffffff8168bfba>] ? __schedule+0x2aa/0x760 [<ffffffff8109e860>] ? rescuer_thread+0x310/0x310 [<ffffffff810a4438>] kthread+0xd8/0xf0 [<ffffffff810a4360>] ? kthread_park+0x60/0x60 [<ffffffff8169030f>] ret_from_fork+0x3f/0x70 [<ffffffff810a4360>] ? kthread_park+0x60/0x60 Code: f6 31 d2 41 89 c2 8b 83 b4 00 00 00 0f af c1 48 98 48 69 c0 40 42 0f 00 48 f7 f6 f6 43 74 10 41 89 c4 75 26 f6 05 9a 6f 03 00 01 <45> 89 96 b0 00 00 00 45 89 a6 ac 00 00 00 75 35 48 83 c4 08 5b RIP [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] RSP <ffff88007830f4e8> CR2: 00000000000000b0 Cc: Jeff Moyer <jmoyer@redhat.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> References: http://lists.freedesktop.org/archives/dri-devel/2015-November/094217.html Fixes: eba1f35dfe14 ("drm: Move timestamping constants into drm_vblank_crtc") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-12ALSA: pci: depend on ZONE_DMADan Williams1-12/+12
There are several sound drivers that 'select ZONE_DMA'. This is backwards as ZONE_DMA is an architecture capability exported to drivers. Switch the polarity of the dependency to disable these drivers when the architecture does not support ZONE_DMA. This was discovered in the context of testing/enabling devm_memremap_pages() which depends on ZONE_DEVICE. ZONE_DEVICE in turn depends on !ZONE_DMA. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-12libnvdimm: documentation clarificationsKonrad Rzeszutek Wilk1-21/+28
A bunch of changes that I hope will help in understanding it better for first-time readers. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12libnvdimm, pmem: fix size trim in pmem_direct_access()Dan Williams1-13/+2
This masking prevents access to the end of the device via dax_do_io(), and is unnecessary as arch_add_memory() would have rejected an unaligned allocation. Cc: <stable@vger.kernel.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12libnvdimm, e820: fix numa node for e820-type-12 pmem rangesDan Williams1-1/+14
Rather than punt on the numa node for these e820 ranges try to find a better answer with memory_add_physaddr_to_nid() when it is available. Cc: <stable@vger.kernel.org> Reported-by: Boaz Harrosh <boaz@plexistor.com> Tested-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12tools/testing/nvdimm, acpica: fix flag rename build breakageDan Williams1-1/+1
Commit ca321d1ca672 "ACPICA: Update NFIT table to rename a flags field" performed a tree-wide s/ACPI_NFIT_MEM_ARMED/ACPI_NFIT_MEM_NOT_ARMED/ operation, but missed the tools/testing/nvdimm/ directory. Cc: Bob Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12arm64: suspend: make hw_breakpoint_restore staticJisheng Zhang1-1/+1
hw_breakpoint_restore is only used within suspend.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mmu: make split_pud and fixup_executable staticJisheng Zhang1-2/+2
split_pud and fixup_executable are only called from within mmu.c, so they can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: smp: make of_parse_and_init_cpus staticJisheng Zhang1-1/+1
of_parse_and_init_cpus is only called from within smp.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: use linux/types.h in kvm.hArnd Bergmann1-1/+1
We should always use linux/types.h instead of asm/types.h for consistency, and Kbuild actually warns about it: ./usr/include/asm/kvm.h:35: include of <linux/types.h> is preferred over <asm/types.h> This patch does as Kbuild asks us. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: build vdso without libgcovArnd Bergmann1-0/+3
On a cross-toolchain without glibc support, libgcov may not be available, and attempting to build an arm64 kernel with GCOV enabled then results in a build error: /home/arnd/cross-gcc/lib/gcc/aarch64-linux/5.2.1/../../../../aarch64-linux/bin/ld: cannot find -lgcov We don't really want to link libgcov into the vdso anyway, so this patch just disables GCOV in the vdso directory, just as we do for most other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mark cpus_have_hwcap as __maybe_unusedArnd Bergmann1-1/+1
cpus_have_hwcap() is defined as a 'static' function an only used in one place that is inside of an #ifdef, so we get a warning when the only user is disabled: arch/arm64/kernel/cpufeature.c:699:13: warning: 'cpus_have_hwcap' defined but not used [-Wunused-function] This marks the function as __maybe_unused, so the compiler knows that it can drop the function definition without warning about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 37b01d53ceef ("arm64/HWCAP: Use system wide safe values") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12ALSA: hda - Simplify phantom jack handling for HDMI/DPTakashi Iwai3-19/+8
The HDMI codec parser may create a phantom jack, but the helper function snd_hda_jack_add_kctl() treats always as a normal jack. This is superfluous as the jack query is executed at each time the jack sync is performed. Since the HDMI codec parser is the only caller of this function, it's easier to change back this directly calling the original __snd_hda_jack_add_kctl() with phantom_jack parameter. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-12MIPS: idle: add case for CPU_5KEAurelien Jarno1-0/+1
While the 5KE processors have never been taped out, they exists though a CP0.PRId and experimental RTLs or QEMU implementations. Add a case entry in the idle code, as they can use the standard idle loop like the 5K processors. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11099/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.