| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert the mtk-gce mailbox binding to DT schema format.
During the conversion, the examples for client device/mutex nodes
were removed, as these are found in their respective bindings:
arm/mediatek/mediatek,mmsys.yaml for "mediatek,mt8173-mmsys"
soc/mediatek/mediatek,mutex.yaml for "mediatek,mt8173-disp-mutex"
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921090006.37642-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_device_is_compatible() accepts const device node pointer, there is
no reason why of_device_compatible_match() can't do the same.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/YzY5MaU5N4A2st5R@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 951d48855d86 ("of: Make of_dma_get_range() work on bus nodes")
relaxed the handling of "dma-ranges" for any leaf node on the assumption
that it would still represent a usage error for the property to be
present on a non-bus leaf node. However there turns out to be a fiddly
case where a bus also represents a DMA-capable device in its own right,
such as a PCIe root complex with an integrated DMA engine on its
platform side. In such cases, "dma-ranges" translation is entirely valid
for devices discovered behind the bus, but should not be erroneously
applied to the bus controller device itself which operates in its
parent's address space. Fix this by restoring the previous behaviour for
the specific case where a device is configured via its own OF node,
since it is logical to assume that a device should never represent its
own parent bus.
Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/112e8f3d3e7c054ecf5e12b5ac0aa5596ec00681.1664455433.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
After commit bba04d965d06("of/fdt: remove unused of_scan_flat_dt_by_path"), no
one use struct fdt_scan_status, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220927133739.98493-1-yuancan@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Handle 'data-lanes' property of the DSI output endpoint, it is possible
to describe DSI link with 1 or 2 data lanes this way.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220926234501.583115-1-marex@denx.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
On K3 SoCs, the power-domains property is needed. On the earlier SoCs,
the power-domains property is handled by the interconnect target module
parent device.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919112357.64997-1-tony@atomide.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add a make target, dt_compatible_check, to extract compatible strings
from kernel sources and check if they are documented by a schema.
At least version v2022.08 of dtschema with dt-check-compatible is
required.
This check can also be run manually on specific files or directories:
scripts/dtc/dt-extract-compatibles drivers/clk/ | \
xargs dt-check-compatible -v -s Documentation/devicetree/bindings/processed-schema.json
Currently, there are about 3800 undocumented compatible strings. Most of
these are cases where the binding is not yet converted (given there
are 1900 .txt binding files remaining).
Link: https://lore.kernel.org/all/20220916012510.2718170-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It is useful to be able to recheck dtbs files against a limited set of
DT schema files. This can be accomplished by using differnt
DT_SCHEMA_FILES argument values while rerunning make dtbs_check. However
for some reason if_changed_rule doesn't pick up the rule_dtc changes
(and doesn't retrigger the build).
Fix this by changing if_changed_rule to if_changed_dep and squashing DTC
and dt-validate into a single new command. Then if_changed_dep triggers
on DT_SCHEMA_FILES changes and reruns the build/check.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220915114422.79378-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
MIPS CPU interrupt controller bindings used text format, so migrate them
to YAML.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921072405.610739-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
SoC MT7621 I2C bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
txt file. This binding is used in MT7621 and MT7628a Ralink SoCs. To
properly match both dts nodes in tree we need to add to the schema
'clocks', 'clock-names' and 'reset-names'. Both 'clock-names' and
'reset-names' use 'i2c' as string so maintain that as const in
the schema. Also, Properly update MAINTAINERS file to align the
changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920052050.582321-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
i.MX8MQ has pgc 'power-domain@a', so correct patternProperties
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923075427.985504-1-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the binding that describes the virtio-pci based IOMMU to DT
schema. Change the compatible string to "pci<vendor>,<device>", which is
defined by the PCI Bus Binding, but keep "virtio,pci-iommu" as an option
for backward compatibility.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923074435.420531-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since the Armv7 and Armv8 architected timers are compatible, it is valid
to expose a devicetree node with compatible string "arm,armv8-timer"
followed by "arm,armv7-timer". For example a 32-bit guest running on a
64-bit machine may look for the v7 string even though the hardware is v8.
VMMs such as QEMU and kvmtool have been using this compatible string for
some time. Clean up the compatible list a little and add the dual
option.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161149.371565-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Kryo240 is found in SM4250, the slower sibling of the SM6115.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-3-iskren.chernev@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the NXP TDA998x HDMI transmitter Device Tree binding
documentation to json-schema.
Add missing "#sound-dai-cells" property.
Add ports hierarchy, as an alternative to port.
Drop pinctrl properties, as they do not belong here.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1224e757ec958f8b29ec66e783a7ee805c339d84.1663165552.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
U-Boot doesn't have cells at hardcoded addresses. They are stored in
internal format. It's still important to define relevant cells in DT so
NVMEM consumers can reference them.
Update binding to allow including basic cells as NVMEM device subnodes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20220703084843.21922-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The smd-edge child node references respective schema which allows
additional properties, so the ADSP needs to further restrict them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906121358.302894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-10-robh@kernel.org
|
|
syscon and simple-mfd cannot be used without device specific compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817142246.828762-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220817142246.828762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220817142246.828762-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add memory-region property to the list of optional properties, specify
the value type and a definition. This property is used to specify the
memory region which should be used for remote heap CMA.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909133938.3518520-4-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
SMD edge contains subnodes representing devices related to the remote
processor. With limietd number of remote processors, there is a limited
set of such devices.
List all of them in smd-edge bindings so schema can strictly check for
subnodes.
Additional benefit is requirement of "qcom,smd-channels" for such
subnodes, because their schema cannot enforce it (few devices like APR
or FastRPC can be part of either SMD or GLINK edge).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Child node of SMD must be either smd-edge or rpm, so the pattern can be
narrowed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
GLINK edge contains subnodes representing devices related to the remote
processor. Each of such device (e.g. APR or FastRPC) must have
a "qcom,glink-channels" property. However the APR or FastRPC device can
be also part of other communication - SMD - thus their schema does not
require "qcom,glink-channels".
To make the GLINK edge bindings strict, require "qcom,glink-channels"
for its children.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The parent of FastRPC node is GLINK edge, so the properties should be
matching GLINK, not SMD. Correct the example and extend it based on
SM8350.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The Qualcomm FastRPC is expected to in GLINK or SMD edge node and its
channel name is always the same.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The children of FastRPC have either one or two IOMMUs in existing DTS
(SM8150, SM8450 and others).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The property in old TXT bindings, in Linux driver and in DTS is
qcom,nsessions.
Fixes: ed18a9b140bc ("dt-bindings: misc: fastrpc convert bindings to yaml")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the PDC interrupt controller bindings to YAML.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220103074348.6039-1-luca.weiss@fairphone.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
If the properties 'linux,initrd-start' and 'linux,initrd-end' of
the chosen node populated from the bootloader, eg. U-Boot, are so that
start > end, then the phys_initrd_size calculated from end - start is
negative that subsequently gets converted to a high positive value for
being unsigned long long. Then, the memory region with the (invalid)
size is added to the bootmem and attempted being paged in paging_init()
that results in the kernel fault.
For example, on the FVP ARM64 system I'm running, the U-Boot populates
the 'linux,initrd-start' with 8800_0000 and 'linux,initrd-end' with 0.
The phys_initrd_size calculated is then ffff_ffff_7800_0000
(= 0 - 8800_0000 = -8800_0000 + ULLONG_MAX + 1). paging_init() then
attempts to map the address 8800_0000 + ffff_ffff_7800_0000 and oops'es
as below.
It should be stressed, it is generally a fault of the bootloader's with
the kernel relying on it, however we should not allow the bootloader's
misconfiguration to lead to the kernel oops. Not only the kernel should be
bullet proof against it but also finding the root cause of the paging
fault spanning over the bootloader, DT, and kernel may happen is not so
easy.
Unable to handle kernel paging request at virtual address fffffffefe43c000
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000007
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[fffffffefe43c000] pgd=0000000080de9003, pud=0000000080de9003
Unable to handle kernel paging request at virtual address ffffff8000de9f90
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[ffffff8000de9f90] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.51-yocto-standard #1
Hardware name: FVP Base (DT)
pstate: 60000085 (nZCv daIf -PAN -UAO)
pc : show_pte+0x12c/0x1b4
lr : show_pte+0x100/0x1b4
sp : ffffffc010ce3b30
x29: ffffffc010ce3b30 x28: ffffffc010ceed80
x27: fffffffefe43c000 x26: fffffffefe43a028
x25: 0000000080bf0000 x24: 0000000000000025
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x21: 0000000080de9000 x20: ffffff7f80000f90
x19: fffffffefe43c000 x18: 0000000000000030
x17: 0000000000001400 x16: 0000000000001c00
x15: ffffffc010cef1b8 x14: ffffffffffffffff
x13: ffffffc010df1f40 x12: ffffffc010df1b70
x11: ffffffc010ce3b30 x10: ffffffc010ce3b30
x9 : 00000000ffffffc8 x8 : 0000000000000000
x7 : 000000000000000f x6 : ffffffc010df16e8
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000ffffffff x2 : 0000000000000000
x1 : 0000008080000000 x0 : ffffffc010af1d68
Call trace:
show_pte+0x12c/0x1b4
die_kernel_fault+0x54/0x78
__do_kernel_fault+0x11c/0x128
do_translation_fault+0x58/0xac
do_mem_abort+0x50/0xb0
el1_da+0x1c/0x90
__create_pgd_mapping+0x348/0x598
paging_init+0x3f0/0x70d0
setup_arch+0x2c0/0x5d4
start_kernel+0x94/0x49c
Code: 92748eb5 900052a0 9135a000 cb010294 (f8756a96)
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Link: https://lore.kernel.org/r/20220909023358.76881-1-marek.bykowski@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In commit 853a78a7d6c7 (dt-bindings: leds: Add LED_COLOR_ID definitions,
Sun Jun 9 20:19:04 2019 +0200) the most basic color definitions where
added. However, there's a little more very common LED colors.
While the documentation states 'add what is missing', engineers tend to
be lazy and will just use what currently exists. So this patch will take
(a) list from online retailers [0], [1], [2] and use the common LED colors from
there, this being reasonable as this is what is currently available to purchase.
Note, that LIME seems to be the modern take to 'Yellow-green' or
'Yellowish-green' from some older datasheets.
[0]: https://www.digikey.com/en/products/filter/led-lighting-color/125
[1]: https://eu.mouser.com/c/optoelectronics/led-lighting/led-emitters/standard-leds-smd
[2]: https://nl.farnell.com/en-NL/c/optoelectronics-displays/led-products/standard-single-colour-leds-under-75ma
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20220830134613.1564059-1-oliver@schinagl.nl
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
For K3 devices the clock fed into the RNG module is shared with the rest
of the Crypto module, it is not dedicated to the RNG module and cannot be
controlled by the RNG driver. The driver does not require this clock to
always be defined and the DT binding should not force it either.
Remove this so we can start dropping out the clock properties as needed.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20220901171041.32056-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
New pr_err(), a copy of preceeding pr_debug(), faciliates debugging.
This change was inspired by a long lasting debugging of the
octeon_irq_init_ciu() which fails completely silently and leaves the
interrupt controller half-way configured which in turn had very non-obvious
effects.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Link: https://lore.kernel.org/r/20220907121629.54330-1-alexander.sverdlin@nokia.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate
dt-entries correctly and any future additions can go into yaml format.
Use compute-cb@ subnodes instead of just cb@. Add qcom,glink-channels and
qcom,smd-channels missing properties to make sure dtbs_check doesn't fail
right off the bat. Correct the name of the parent node in the example from
smd-edge to glink-edge.
Since now the qcom,fastrpc bindings document is yaml, update the
reference to it in qcom,glink-edge and also use $ref.
Also update the MAINTAINERS file to point to the yaml version.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220907074301.3996021-1-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-16-robh@kernel.org
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-15-robh@kernel.org
|
|
crypto driver itself is not dma-coherent. It is the dmaengine
that moves data and the buffers are to be mapped to the
dmaengine provider. So this property should be dropped.
Fixes: 2ce9a7299bf6 ('dt-bindings: crypto: Add TI SA2UL crypto accelerator documentation')
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20220826091142.262325-1-j-choudhary@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
On PM660L, PMI8994 and PMI8998, the WLED has two address spaces. This
also fixes dtbs_check warnings like:
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dtb: leds@d800: reg: [[55296], [55552]] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220825125410.232377-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document compatibles for QFPROM used on IPQ8064 and SDM630. They are
compatible with generic QFPROM fallback.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220825125410.232377-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220825113334.196908-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220825113334.196908-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220825113334.196908-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-3-robh@kernel.org
|
|
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220825113334.196908-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
reg-io-width is a standard property, so no need for defining its type
with $ref.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220823101031.387082-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-11-robh@kernel.org
|
|
DT bindings using the graph binding must have references to the graph
binding schema. These are missing from the adi,adv7511 and adi,adv7533
bindings, so add them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220823145649.3118479-12-robh@kernel.org
|
|
As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/
DT schema files should not have 'Device Tree Binding' as part of there
title: line. Remove this in most .yaml files, so hopefully preventing
developers copying it into new .yaml files, and being asked to remove
it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
AngeloGioacchino Del Regno
Dmitry Torokhov
Robin Murphy
Yuan Can
Marek Vasut
Tony Lindgren
Rob Herring
Dmitry Baryshkov
Sergio Paracuellos
Peng Fan
Jean-Philippe Brucker
Iskren Chernev
Geert Uytterhoeven
Rafał Miłecki
Krzysztof Kozlowski
Abel Vesa
Luca Weiss
Marek Bykowski
Olliver Schinagl
Andrew Davis
Alexander Sverdlin
Jayesh Choudhary
Andrew Lunn
Frank Rowand