aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-08-29f2fs: check return value of write_checkpoint during fstrimChao Yu1-0/+2
During fstrim, if one of multiple write_checkpoint failed, break off and return error number to caller. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: fix to do f2fs_balance_fs in f2fs_map_blocks correctlyChao Yu1-0/+1
If we preallocate blocks with f2fs_reserve_blocks in f2fs_map_blocks, we should call f2fs_balance_fs for checking and reclaiming space, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: avoid unneeded loop in build_sit_entriesChao Yu1-16/+32
When building each sit entry in cache, firstly, we will load it from sit page, and then check all entries in sit journal, if there is one updated entry in journal, cover cached entry with the journaled one. Actually, most of check operation is unneeded since we only need to update cached entries with journaled entries in batch, so changing the flow as below for more efficient: 1. load all sit entries into cache from sit pages; 2. update sit entries with journal. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: clean up foreground GC flowChao Yu1-11/+8
This patch changes to check valid block number of one GCed section directly instead of checking the number in all segments of section one by one in order to clean up codes of foreground GC. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: set dirty state for filesystem only when updating meta dataChao Yu1-0/+4
We don't guarantee integrity of user data after checkpoint, since we only guarantee meta data integrity for data consistency of filesystem. Due to above reason, we only need to set fs as dirty when meta data is updated, so that we can skip writing checkpoint in some case of non-meta data is updated. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: skip new checkpoint when doing fstrim without fs changeYunlei He1-0/+11
This patch enables to do fstrim without checkpoint, if there is no fs change. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: add discard info to sys entry of f2fs statusYunlei He2-3/+14
This patch add discard block count to sys entry of f2fs status Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29f2fs: reduce batch size of fstrimJaegeuk Kim1-1/+1
This is to reduce the batch size of fstrim to avoid long latency. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-24f2fs: clean up bio cache traceChao Yu1-11/+7
Trace info related to bio cache operation is out of format, clean up it. Before: <...>-28308 [002] .... 4781.052703: f2fs_submit_write_bio: dev = (251,1), WRITEWRITE_SYNC ^H, DATA, sector = 271424, size = 126976 <...>-28308 [002] .... 4781.052820: f2fs_submit_page_mbio: dev = (251,1), ino = 103, page_index = 0x1f, oldaddr = 0xffffffff, newaddr = 0x84a7 rw = WRITEWRITE_SYNCi ^H, type = DATA kworker/u8:2-29988 [001] .... 5549.293877: f2fs_submit_page_mbio: dev = (251,1), ino = 91, page_index = 0xd, oldaddr = 0xffffffff, newaddr = 0x782f rw = WRITE0x0i ^H type = DATA After: kworker/u8:2-8678 [000] .... 7945.124459: f2fs_submit_write_bio: dev = (251,1), rw = WRITE_SYNC, DATA, sector = 74080, size = 53248 kworker/u8:2-8678 [000] .... 7945.124551: f2fs_submit_page_mbio: dev = (251,1), ino = 11, page_index = 0xec, oldaddr = 0xffffffff, newaddr = 0x243a, rw = WRITE, type = DATA Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-24f2fs: do not use discard_map for hard disksJaegeuk Kim3-10/+29
We don't need to keep discard_map, if disk does not support discard command. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-24f2fs: not allow to write illegal blkaddrYunlei He1-2/+2
we came across an error as below: [build_nat_area_bitmap:1710] nid[0x 1718] addr[0x 1c18ddc] ino[0x 1718] [build_nat_area_bitmap:1710] nid[0x 1719] addr[0x 1c193d5] ino[0x 1719] [build_nat_area_bitmap:1710] nid[0x 171a] addr[0x 1c1736e] ino[0x 171a] [build_nat_area_bitmap:1710] nid[0x 171b] addr[0x 58b3ee8f] ino[0x815f92ed] [build_nat_area_bitmap:1710] nid[0x 171c] addr[0x fcdc94b] ino[0x49366377] [build_nat_area_bitmap:1710] nid[0x 171d] addr[0x 7cd2facf] ino[0xb3c55300] [build_nat_area_bitmap:1710] nid[0x 171e] addr[0x bd4e25d0] ino[0x77c34c09] ... ... [build_nat_area_bitmap:1710] nid[0x 1718] addr[0x 1c18ddc] ino[0x 1718] [build_nat_area_bitmap:1710] nid[0x 1719] addr[0x 1c193d5] ino[0x 1719] [build_nat_area_bitmap:1710] nid[0x 171a] addr[0x 1c1736e] ino[0x 171a] [build_nat_area_bitmap:1710] nid[0x 171b] addr[0x 58b3ee8f] ino[0x815f92ed] [build_nat_area_bitmap:1710] nid[0x 171c] addr[0x fcdc94b] ino[0x49366377] [build_nat_area_bitmap:1710] nid[0x 171d] addr[0x 7cd2facf] ino[0xb3c55300] [build_nat_area_bitmap:1710] nid[0x 171e] addr[0x bd4e25d0] ino[0x77c34c09] One nat block may be stepped by a data block, so this patch forbid to write if the blkaddr is illegal Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-23vhost/scsi: fix reuse of &vq->iov[out] in responseBenjamin Coddington1-3/+3
The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141a487 ("vhost/scsi: Convert completion path to use copy_to_iter") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-22usercopy: fix overlap check for kernel textJosh Poimboeuf1-1/+1
When running with a local patch which moves the '_stext' symbol to the very beginning of the kernel text area, I got the following panic with CONFIG_HARDENED_USERCOPY: usercopy: kernel memory exposure attempt detected from ffff88103dfff000 (<linear kernel text>) (4096 bytes) ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:79! invalid opcode: 0000 [#1] SMP ... CPU: 0 PID: 4800 Comm: cp Not tainted 4.8.0-rc3.after+ #1 Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.5.4 01/22/2016 task: ffff880817444140 task.stack: ffff880816274000 RIP: 0010:[<ffffffff8121c796>] __check_object_size+0x76/0x413 RSP: 0018:ffff880816277c40 EFLAGS: 00010246 RAX: 000000000000006b RBX: ffff88103dfff000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88081f80dfa8 RDI: ffff88081f80dfa8 RBP: ffff880816277c90 R08: 000000000000054c R09: 0000000000000000 R10: 0000000000000005 R11: 0000000000000006 R12: 0000000000001000 R13: ffff88103e000000 R14: ffff88103dffffff R15: 0000000000000001 FS: 00007fb9d1750800(0000) GS:ffff88081f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000021d2000 CR3: 000000081a08f000 CR4: 00000000001406f0 Stack: ffff880816277cc8 0000000000010000 000000043de07000 0000000000000000 0000000000001000 ffff880816277e60 0000000000001000 ffff880816277e28 000000000000c000 0000000000001000 ffff880816277ce8 ffffffff8136c3a6 Call Trace: [<ffffffff8136c3a6>] copy_page_to_iter_iovec+0xa6/0x1c0 [<ffffffff8136e766>] copy_page_to_iter+0x16/0x90 [<ffffffff811970e3>] generic_file_read_iter+0x3e3/0x7c0 [<ffffffffa06a738d>] ? xfs_file_buffered_aio_write+0xad/0x260 [xfs] [<ffffffff816e6262>] ? down_read+0x12/0x40 [<ffffffffa06a61b1>] xfs_file_buffered_aio_read+0x51/0xc0 [xfs] [<ffffffffa06a6692>] xfs_file_read_iter+0x62/0xb0 [xfs] [<ffffffff812224cf>] __vfs_read+0xdf/0x130 [<ffffffff81222c9e>] vfs_read+0x8e/0x140 [<ffffffff81224195>] SyS_read+0x55/0xc0 [<ffffffff81003a47>] do_syscall_64+0x67/0x160 [<ffffffff816e8421>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fb9d0c33c00>] 0x7fb9d0c33c00 RSP: 002b:00007ffc9c262f28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: fffffffffff8ffff RCX: 00007fb9d0c33c00 RDX: 0000000000010000 RSI: 00000000021c3000 RDI: 0000000000000004 RBP: 00000000021c3000 R08: 0000000000000000 R09: 00007ffc9c264d6c R10: 00007ffc9c262c50 R11: 0000000000000246 R12: 0000000000010000 R13: 00007ffc9c2630b0 R14: 0000000000000004 R15: 0000000000010000 Code: 81 48 0f 44 d0 48 c7 c6 90 4d a3 81 48 c7 c0 bb b3 a2 81 48 0f 44 f0 4d 89 e1 48 89 d9 48 c7 c7 68 16 a3 81 31 c0 e8 f4 57 f7 ff <0f> 0b 48 8d 90 00 40 00 00 48 39 d3 0f 83 22 01 00 00 48 39 c3 RIP [<ffffffff8121c796>] __check_object_size+0x76/0x413 RSP <ffff880816277c40> The checked object's range [ffff88103dfff000, ffff88103e000000) is valid, so there shouldn't have been a BUG. The hardened usercopy code got confused because the range's ending address is the same as the kernel's text starting address at 0xffff88103e000000. The overlap check is slightly off. Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-22usercopy: avoid potentially undefined behavior in pointer mathEric Biggers1-1/+1
check_bogus_address() checked for pointer overflow using this expression, where 'ptr' has type 'const void *': ptr + n < ptr Since pointer wraparound is undefined behavior, gcc at -O2 by default treats it like the following, which would not behave as intended: (long)n < 0 Fortunately, this doesn't currently happen for kernel code because kernel code is compiled with -fno-strict-overflow. But the expression should be fixed anyway to use well-defined integer arithmetic, since it could be treated differently by different compilers in the future or could be reported by tools checking for undefined behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-21Linux 4.8-rc3Linus Torvalds1-1/+1
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck4-0/+1136
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-20parisc: Fix order of EREFUSED define in errno.hHelge Deller1-2/+2
When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2016-08-20parisc: Fix automatic selection of cr16 clocksourceHelge Deller2-20/+0
Commit 54b66800907 (parisc: Add native high-resolution sched_clock() implementation) added support to use the CPU-internal cr16 counters as reliable clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK. Sadly the commit missed to remove the hack which prevented cr16 to become the default clocksource even on SMP systems. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.7+
2016-08-19ARC: export __udivdi3 for modulesVineet Gupta1-0/+2
Some module using div_u64() was failing to link because the libgcc 64-bit divide assist routine was not being exported for modules Reported-by: avinashp@quantenna.com Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19Make the hardened user-copy code depend on having a hardened allocatorLinus Torvalds1-0/+1
The kernel test robot reported a usercopy failure in the new hardened sanity checks, due to a page-crossing copy of the FPU state into the task structure. This happened because the kernel test robot was testing with SLOB, which doesn't actually do the required book-keeping for slab allocations, and as a result the hardening code didn't realize that the task struct allocation was one single allocation - and the sanity checks fail. Since SLOB doesn't even claim to support hardening (and you really shouldn't use it), the straightforward solution is to just make the usercopy hardening code depend on the allocator supporting it. Reported-by: kernel test robot <xiaolong.ye@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-19ARC: mm: fix build breakage with STRICT_MM_TYPECHECKSVineet Gupta1-1/+1
| CC mm/memory.o | In file included from ../mm/memory.c:53:0: | ../include/linux/pfn_t.h: In function ‘pfn_t_pte’: | ../include/linux/pfn_t.h:78:2: error: conversion to non-scalar type requested | return pfn_pte(pfn_t_to_pfn(pfn), pgprot); With STRICT_MM_TYPECHECKS pte_t is a struct and the offending code forces a cast which ends up shifting a struct and hence the gcc warning. Note that in recent past some of the arches (aarch64, s390) made STRICT_MM_TYPECHECKS default, but we don't for ARC as this leads to slightly worse generated code, given ARC ABI definition of returning structs (which pte_t would become) Quoting from ARC ABI... "Results of type struct are returned in a caller-supplied temporary variable whose address is passed in r0. For such functions, the arguments are shifted so that they are passed in r1 and up." So - struct to be returned would be allocated on stack requiring extra code at call sites - callee updates stack memory to facilitate the return (vs. simple MOV into return reg r0) Hence STRICT_MM_TYPECHECKS is not enabled by default for ARC Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: export kmapVineet Gupta1-0/+1
| MODPOST 7 modules | ERROR: "kmap" [fs/ext2/ext2.ko] undefined! | ../scripts/Makefile.modpost:91: recipe for target '__modpost' failed Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: Support syscall ABI v4Vineet Gupta3-5/+14
The syscall ABI includes the gcc functional calling ABI since a syscall implies userland caller and kernel callee. The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in even-odd register pairs, (potentially punching reg holes when passing such values as args). This was partly driven by the fact that the double-word LDD/STD instructions in ARCv2 expect the register alignment and thus gcc forcing this avoids extra MOV at the cost of a few unused register (which we have plenty anyways). This however was rejected as part of upstreaming gcc port to HS. So the new ABI v4 doesn't enforce the even-odd reg restriction. Do note that for ARCompact ISA builds v3 and v4 are practically the same in terms of gcc code generation. In terms of change management, we infer the new ABI if gcc 6.x onwards is used for building the kernel. This also needs a stable backport to enable older kernels to work with new tools/user-space Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19ARC: use correct offset in pt_regs for saving/restoring user mode r25Liav Rehana1-2/+2
User mode callee regs are explicitly collected before signal delivery or breakpoint trap. r25 is special for kernel as it serves as task pointer, so user mode value is clobbered very early. It is saved in pt_regs where generally only scratch (aka caller saved) regs are saved. The code to access the corresponding pt_regs location had a subtle bug as it was using load/store with scaling of offset, whereas the offset was already byte wise correct. So fix this by replacing LD.AS with a standard LD Cc: <stable@vger.kernel.org> Signed-off-by: Liav Rehana <liavr@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [vgupta: rewrote title and commit log] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19gpio: make any OF dependent driver depend on OF_GPIOLinus Walleij1-5/+5
The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent <rabin@rab.in> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19gpio: Fix OF build problem on UMLinus Walleij1-0/+1
The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19f2fs: avoid potential deadlock in f2fs_move_file_rangeChao Yu1-2/+7
Thread A Thread B - inode_lock fileA - inode_lock fileB - inode_lock fileA - inode_lock fileB We may encounter above potential deadlock during moving file range in concurrent scenario. This patch fixes the issue by using inode_trylock instead. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19f2fs: allow copying file range only in between regular filesChao Yu1-2/+2
Only if two input files are regular files, we allow copying data in range of them, otherwise, deny it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19Revert "f2fs: move i_size_write in f2fs_write_end"Chao Yu1-1/+1
This reverts commit a2ee0a300344a6da76186129b078113354fe13d2. When testing with generic/032 of xfstest suit, failure message will be reported as below: generic/032 8s ... [failed, exit status 1] - output mismatch (see results/generic/032.out.bad) --- tests/generic/032.out 2015-01-11 16:52:27.643681072 +0800 +++ results/generic/032.out.bad 2016-08-06 13:44:43.861330500 +0800 @@ -1,5 +1,5 @@ QA output created by 032 -100 iterations -0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd -* -0100000 +1: [768..775]: unwritten +Unwritten extents found! ... (Run 'diff -u tests/generic/032.out results/generic/032.out.bad' to see the entire diff) Ran: generic/032 Failures: generic/032 Failed 1 of 1 tests In write_end(), we should update i_size of inode before unlock page, otherwise, we will lose newly updated data in following race condition. Thread A Thread B - write_end - unlock page - writepages - lock_page - writepage if page is out-of-range of file size, we will skip writting the page. - update i_size Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19Revert "f2fs: use percpu_rw_semaphore"Jaegeuk Kim3-35/+30
LKP reported -36.3% regression of fsmark.files_per_sec due to this patch. I've confirmed that fxmark [1] has also slight regression for DWAL. [1] https://github.com/sslab-gatech/fxmark This reverts commit ec795418c41850056feb956534edf059dc1155d4.
2016-08-18locking/barriers: Suppress sparse warnings in lockless_dereference()Johannes Berg1-3/+3
After Peter's commit: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"Johannes Berg1-1/+1
This reverts commit: fa7d81bb3c269 ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference") As Peter explained: [...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker. [...] Also, clue is in the name: 'dereference', you don't actually dereference the pointer here, only load it. My next patch breaks the compile without this revert, because it assumes you want to deference and thus also need the struct type visible (which it isn't here), so revert it. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1470909022-687-1-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18arm64: Fix shift warning in arch/arm64/mm/dump.cCatalin Marinas1-3/+3
When building with 48-bit VAs and 16K page configuration, it's possible to get the following warning when building the arm64 page table dumping code: arch/arm64/mm/dump.c: In function ‘walk_pud’: arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow] This is because pud_offset(pgd, 0) performs a shift to the right by 36 while the value 0 has the type 'int' by default, therefore 32-bit. This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to use 0UL for the address argument. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-18sched/cputime: Resync steal time when guest & host lose syncWanpeng Li1-3/+15
Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regressionPeter Zijlstra1-5/+10
Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: stable@vger.kernel.org # 4.3+ Fixes: 9d7fb0427648 ("sched/cputime: Guarantee stime + utime == rtime") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Check return value of the perf_event_read() IPIDavid Carrillo-Cisneros1-3/+4
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Enable mapping of the stop filtersMathieu Poirier1-10/+5
At this time the perf_addr_filter_needs_mmap() function will _not_ return true on a user space 'stop' filter. But stop filters need exactly the same kind of mapping that range and start filters get. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Update filters only on executable mmapMathieu Poirier1-0/+7
Function perf_event_mmap() is called by the MM subsystem each time part of a binary is loaded in memory. There can be several mapping for a binary, many times unrelated to the code section. Each time a section of a binary is mapped address filters are updated, event when the map doesn't pertain to the code section. The end result is that filters are configured based on the last map event that was received rather than the last mapping of the code segment. For example if we have an executable 'main' that calls library 'libcstest.so.1.0', and that we want to collect traces on code that is in that library. The perf cmd line for this scenario would be: perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main Resulting in binaries being mapped this way: root@linaro-nano:~# cat /proc/1950/maps 00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main 00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main 00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main 7fa2464000-7fa2474000 rw-p 00000000 00:00 0 7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0 7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0 7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0 7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar] 7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso] 7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack] root@linaro-nano:~# Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in memory. Once that has been done perf_event_mmap() has been called 4 times, with the last map starting at address 0x7fa25ce000 and the address filter configured to start filtering when the IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c). But that is wrong since the code segment for library 'libcstest.so.1.0' as been mapped at 0x7fa25bd000, resulting in traces not being collected. This patch corrects the situation by requesting that address filters be updated only if the mapped event is for a code segment. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix file name handling for start/stop filtersMathieu Poirier1-2/+4
Binary file names have to be supplied for both range and start/stop filters but the current code only processes the filename if an address range filter is specified. This code adds processing of the filename for start/stop filters. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix event_function_local()Peter Zijlstra1-12/+48
Vincent reported triggering the WARN_ON_ONCE() in event_function_local(). While thinking through cases I noticed that by using event_function() directly, we miss the inactive case usually handled by event_function_call(). Therefore construct a blend of event_function_call() and event_function() that handles the cases relevant to event_function_local(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 4.5+ Fixes: fae3fde65138 ("perf: Collapse and fix event_function_call() users") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/smp: Fix __max_logical_packages value setupJiri Olsa1-9/+16
Frank reported kernel panic when he disabled several cores in BIOS via following option: Core Disable Bitmap(Hex) [0] with number 0xFFE, which leaves 16 CPUs in system (out of 48). The kernel panic below goes along with following messages: smpboot: Max logical packages: 2^M smpboot: APIC(0) Converting physical 0 to logical package 0^M smpboot: APIC(20) Converting physical 1 to logical package 1^M smpboot: APIC(40) Package 2 exceeds logical package map^M smpboot: CPU 8 APICId 40 disabled^M smpboot: APIC(60) Package 3 exceeds logical package map^M smpboot: CPU 12 APICId 60 disabled^M ... general protection fault: 0000 [#1] SMP^M Modules linked in:^M CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M ... [<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M [<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M [<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M [<ffffffff81002190>] do_one_initcall+0x50/0x190^M [<ffffffff810ab193>] ? parse_args+0x293/0x480^M [<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M [<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M [<ffffffff816dc19e>] kernel_init+0xe/0x110^M [<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M [<ffffffff816dc190>] ? rest_init+0x80/0x80^M The reason for the panic is wrong value of __max_logical_packages, which lets logical_package_map uninitialized and the uncore code relying on this map being properly initialized (maybe we should add some safety checks there as well). The __max_logical_packages is computed as: DIV_ROUND_UP(total_cpus, ncpus); - ncpus being number of cores With above BIOS setup we get total_cpus == 16 which set __max_logical_packages to 2 (ncpus is 12). Once topology_update_package_map processes CPU with logical pkg over 2 we display above messages and fail to initialize the physical_to_logical_pkg map, which makes the uncore code crash. The fix is to remove logical_package_map bitmap completely and keep and update the logical_packages number instead. After we enumerate all the present CPUs, we check if the enumerated logical packages count is within its computed maximum from BIOS data. If it's not the case, we set this maximum to the new enumerated value and freeze any new addition of logical packages. The freeze is because lot of init code like uncore/rapl/cqm depends on having maximum logical package value set to allocate their data, so we can't change it later on. Prarit Bhargava tested the patch and confirms that it solves the problem: From dmidecode: Core Count: 24 Core Enabled: 24 Thread Count: 48 Orig kernel boot log: [ 0.464981] smpboot: Max logical packages: 19 [ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3 1. nr_cpus=8, should stop enumerating in package 0: [ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.539596] smpboot: Max logical packages: 19 2. max_cpus=8, should still enumerate all packages: [ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.550524] smpboot: Max logical packages: 19 3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in package 2: [ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.539368] smpboot: Max logical packages: 19 4. maxcpus=49, should still enumerate all packages: [ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.549624] smpboot: Max logical packages: 19 5. kdump (nr_cpus=1) works as well. Reported-by: Frank Ramsay <framsay@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=yBorislav Petkov1-1/+8
Similar to: efaad554b4ff ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y") ... fix microcode loading from the initrd on AMD by adding the randomization offset to the microcode patch container within the initrd. Reported-and-tested-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18uprobes: Fix the memcg accountingOleg Nesterov1-2/+3
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b531c47 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17net_sched: allow flushing tc police actionsRoman Mashak1-42/+1
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: unify the init logic for act_policeWANG Cong1-9/+10
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe56971 ("act_police: fix a crash during removal") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: convert tcf_exts from list to pointer arrayWANG Cong7-41/+85
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: move tc offload macros to pkt_cls.hWANG Cong2-16/+22
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: fix a typo in tc_for_each_action()WANG Cong1-1/+1
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove an unnecessary list_del()WANG Cong1-1/+0
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc4495 ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove the leftover cleanup_a()WANG Cong1-19/+3
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.