| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we're going to log the failure, we might as well log the return code
too.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220824165213.1.Ifdb98af3d0c23708a11d8d5ae5697bdb7e96a3cc@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use IS_ERR_OR_NULL() helper in class_unregister() to simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220822061922.3884113-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818205956.6528-1-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add cgroup_file_show() which allows toggling visibility of a cgroup file
using the new kernfs_show(). This will be used to hide psi interface files
on cgroups where it's disabled.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-10-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, kernfs nodes can be created hidden and activated later by calling
kernfs_activate() to allow creation of multiple nodes to succeed or fail as
a unit. This is an one-way one-time-only transition. This patch introduces
kernfs_show() which can toggle visibility dynamically.
As the currently proposed use - toggling the cgroup pressure files - only
requires operating on leaf nodes, for the sake of simplicity, restrict it as
such for now.
Hiding uses the same mechanism as deactivation and likewise guarantees that
there are no in-flight operations on completion. KERNFS_ACTIVATED and
KERNFS_HIDDEN are used to manage the interactions between activations and
show/hide operations. A node is visible iff both activated & !hidden.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-9-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out kernfs_activate_one() from kernfs_activate() and reorder
operations so that KERNFS_ACTIVATED now simply indicates whether activation
was attempted on the node ignoring whether activation took place. As the
flag doesn't have a reader, the refactoring and reordering shouldn't cause
any behavior difference.
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-8-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
KERNFS_ACTIVATED tracks whether a given node has ever been activated. As a
node was only deactivated on removal, this was used for
1. Drain optimization (removed by the previous patch).
2. To hide !activated nodes
3. To avoid double activations
4. Reject adding children to a node being removed
5. Skip activaing a node which is being removed.
We want to decouple deactivation from removal so that nodes can be
deactivated and hidden dynamically, which makes KERNFS_ACTIVATED useless for
all of the above purposes.
#1 is already gone. #2 and #3 can instead test whether the node is currently
active. A new flag KERNFS_REMOVING is added to explicitly mark nodes which
are being removed for #4 and #5.
While this leaves KERNFS_ACTIVATED with no users, leave it be as it will be
used in a following patch.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-7-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__kernfs_remove() was skipping draining based on KERNFS_ACTIVATED - whether
the node has ever been activated since creation. Instead, update it to
always call kernfs_drain() which now drains or skips based on the precise
drain conditions. This ensures that the nodes will be deactivated and
drained regardless of their states.
This doesn't make meaningful difference now but will enable deactivating and
draining nodes dynamically by making removals safe when racing those
operations.
While at it, drop / update comments.
v2: Fix the inverted test on kernfs_should_drain_open_files() noted by
Chengming. This was fixed by the next unrelated patch in the previous
posting.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-6-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Track the number of mmapped files and files that need to be released and
skip kernfs_drain_open_file() if both are zero, which are the precise
conditions which require draining open_files. The early exit test is
factored into kernfs_should_drain_open_files() which is now tested by
kernfs_drain_open_files()'s caller - kernfs_drain().
This isn't a meaningful optimization on its own but will enable future
stand-alone kernfs_deactivate() implementation.
v2: Chengming noticed that on->nr_to_release was leaking after ->open()
failure. Fix it by telling kernfs_unlink_open_file() that it's called
from the ->open() fail path and should dec the counter. Use kzalloc() to
allocate kernfs_open_node so that the tracking fields are correctly
initialized.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-5-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out commont part. This is cleaner and should help with future
changes. No functional changes.
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-4-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are unnecessary and unconventional. Remove them. Also move variable
declaration into the block that it's used. No functional changes.
Cc: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-3-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kernfs_node->attr.open is an RCU pointer to kernfs_open_node. However, RCU
dereference is currently only used in kernfs_notify(). Everywhere else,
either we're holding the lock which protects it or know that the
kernfs_open_node is pinned becaused we have a pointer to a kernfs_open_file
which is hanging off of it.
kernfs_deref_open_node() is used for the latter case - accessing
kernfs_open_node from kernfs_open_file. The lifetime and visibility rules
are simple and clear here. To someone who can access a kernfs_open_file, its
kernfs_open_node is pinned and visible through of->kn->attr.open.
Replace kernfs_deref_open_node() which simpler of_on(). The former takes
both @kn and @of and RCU deref @kn->attr.open while sanity checking with
@of. The latter takes @of and uses protected deref on of->kn->attr.open.
As the return value can't be NULL, remove the error handling in the callers
too.
This shouldn't cause any functional changes.
Cc: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-2-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_ioremap_np has never been used anywhere since it was added in early
2021, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220822061424.151819-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.
Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5053 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.
Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.
Now when a string field is used, the ":string" type can be used to display
it:
echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events
Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.
Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.
Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:
BUG: kernel NULL pointer dereference, address: 0000000000000024
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:get_event_field.isra.0+0x0/0x50
Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
Call Trace:
<TASK>
get_eprobe_size+0xb4/0x640
? __mod_node_page_state+0x72/0xc0
__eprobe_trace_func+0x59/0x1a0
? __mod_lruvec_page_state+0xaa/0x1b0
? page_remove_file_rmap+0x14/0x230
? page_remove_rmap+0xda/0x170
event_triggers_call+0x52/0xe0
trace_event_buffer_commit+0x18f/0x240
trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
try_to_wake_up+0x260/0x4c0
__wake_up_common+0x80/0x180
__wake_up_common_lock+0x7c/0xc0
do_notify_parent+0x1c9/0x2a0
exit_notify+0x1a9/0x220
do_exit+0x2ba/0x450
do_group_exit+0x2d/0x90
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Obviously this is not the desired result.
Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.
Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.
Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.
The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().
WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20
If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.
Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.
Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.
Commit 95c104c378dc ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.
Reinstate using the return value in the error-return-value checking.
Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com
Fixes: 95c104c378dc ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This reverts commit 9ae551ded5ba55f96a83cd0811f7ef8c2f329d0c. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.
Reported-by: Josef Johansson <josef@oderland.se>
Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.se
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:
warning: Call to function 'memset' is insecure as it does not provide
security checks introduced in the C11 standard. Replace with analogous
functions that support length arguments or provides boundary checks such
as 'memset_s' in case of C11
[clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit b2c885549122 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.
Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.
Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.
Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.
Get back to the original order.
Fixes: b2c885549122 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1fef0 ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.
We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since commit 7b4537199a4a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
$ sparc64-linux-gnu-nm -n vmlinux
[snip]
0000000000c2cea0 r __ksymtab__kstrtol
0000000000c2ceb8 r __ksymtab__kstrtoul
0000000000c2ced0 r __ksymtab__local_bh_enable
0000000000c2cee8 r __ksymtab__mcount
0000000000c2cf00 r __ksymtab__printk
0000000000c2cf18 r __ksymtab__raw_read_lock
0000000000c2cf30 r __ksymtab__raw_read_lock_bh
[snip]
0000000000c53b34 D __crc__kstrtol
0000000000c53b38 D __crc__kstrtoul
0000000000c53b3c D __crc__local_bh_enable
0000000000c53b40 D __crc__printk
0000000000c53b44 D __crc__raw_read_lock
0000000000c53b48 D __crc__raw_read_lock_bh
Please notice __crc__mcount is missing here.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
|
|
Commit 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.
For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.
For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.
This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.
As report by Oliver at [0], this caused a performance regression.
Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.
[0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3
Fixes: 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors")
Reported-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The recent kernel added lost count can be read from either read(2) or
ring buffer data with PERF_SAMPLE_READ. As it's a variable length data
we need to access it according to the format info.
But for perf tools use cases, PERF_FORMAT_ID is always set. So we can
only check PERF_FORMAT_LOST bit to determine the data format.
Add sample_read_value_size() and next_sample_read_value() helpers to
make it a bit easier to access. Use them in all places where it reads
the struct sample_read_value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the trivial change in:
119a784c81270eb8 ("perf/core: Add a new read format to get a number of lost samples")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
43bb9e000ea4c621 ("KVM: x86: Tweak name of MONITOR/MWAIT #UD quirk to make it #UD specific")
94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members")
bfbcc81bb82cbbad ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior")
b172862241b48499 ("KVM: x86: PIT: Preserve state of speaker port data bit")
ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Link: https://lore.kernel.org/lkml/Yv6OMPKYqYSbUxwZ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
2f4073e08f4cc5a4 ("KVM: VMX: Enable Notify VM exit")
That makes 'perf kvm-stat' aware of this new NOTIFY exit reason, thus
addressing the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tao Xu <tao3.xu@intel.com>
Link: http://lore.kernel.org/lkml/Yv6LavXMZ+njijpq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
f345a0143b4dd1cf ("vhost-vdpa: uAPI to suspend the device")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-08-18 09:46:12.355958316 -0300
+++ after 2022-08-18 09:46:19.701182822 -0300
@@ -29,6 +29,7 @@
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
[0x7C] = "VDPA_SET_GROUP_ASID",
+ [0x7D] = "VDPA_SUSPEND",
};
= {
[0x00] = "GET_FEATURES",
$
For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_SUSPEND will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yv6Kb4OESuNJuH6X@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Link: http://lore.kernel.org/lkml/YvzwMXzaIzOU4WAY@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
8a061562e2f2b32b ("RISC-V: KVM: Add extensible CSR emulation framework")
f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report")
450a563924ae9437 ("KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats")
1b870fa5573e260b ("kvm: stats: tell userspace which values are boolean")
db1c875e0539518e ("KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices")
94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members")
084cc29f8bbb034c ("KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis")
2f4073e08f4cc5a4 ("KVM: VMX: Enable Notify VM exit")
ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault")
e9bf3acb23f0a6e1 ("KVM: s390: Add KVM_CAP_S390_PROTECTED_DUMP")
8aba09588d2af37c ("KVM: s390: Add CPU dump functionality")
0460eb35b443f73f ("KVM: s390: Add configuration dump functionality")
fe9a93e07ba4f29d ("KVM: s390: pv: Add query dump information")
35d02493dba1ae63 ("KVM: s390: pv: Add query interface")
c24a950ec7d60c4d ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata for SEV-ES")
ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.")
661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version")
536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode")
942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID")
2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events")
That just rebuilds perf, as these patches add just an ioctl that is S390
specific and may clash with other arches, so are so far being excluded
in the harvester script:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
$ grep 390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Anup Patel <anup@brainfault.org>
Cc: Ben Gardon <bgardon@google.com>
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: João Martins <joao.m.martins@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tao Xu <tao3.xu@intel.com>
Link: https://lore.kernel.org/lkml/YvzuryClcn%2FvA0Gn@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
a913bde810fc464d ("drm/i915: Update i915 uapi documentation")
525e93f6317a08a0 ("drm/i915/uapi: add NEEDS_CPU_ACCESS hint")
141f733bb3abb000 ("drm/i915/uapi: expose the avail tracking")
3f4309cbdc849637 ("drm/i915/uapi: add probed_cpu_visible_size")
a50794f26f52c66c ("uapi/drm/i915: Document memory residency and Flat-CCS capability of obj")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Link: http://lore.kernel.org/lkml/Yvzrp9RFIeEkb5fI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
2b1299322016731d ("x86/speculation: Add RSB VM Exit protections")
28a99e95f55c6185 ("x86/amd: Use IBPB for firmware calls")
4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior")
26aae8ccbc197223 ("x86/cpu/amd: Enumerate BTC_NO")
9756bba28470722d ("x86/speculation: Fill RSB on vmexit for IBRS")
3ebc170068885b6f ("x86/bugs: Add retbleed=ibpb")
2dbb887e875b1de3 ("x86/entry: Add kernel IBRS implementation")
6b80b59b35557065 ("x86/bugs: Report AMD retbleed vulnerability")
a149180fbcf336e9 ("x86: Add magic AMD return-thunk")
15e67227c49a5783 ("x86: Undo return-thunk damage")
a883d624aed463c8 ("x86/cpufeatures: Move RETPOLINE flags to word 11")
aae99a7c9ab371b2 ("x86/cpufeatures: Introduce x2AVIC CPUID bit")
6f33a9daff9f0790 ("x86: Fix comment for X86_FEATURE_ZEN")
51802186158c74a0 ("x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Wyes Karny <wyes.karny@amd.com>
Link: https://lore.kernel.org/lkml/Yvznmu5oHv0ZDN2w@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption")
That don't result in any changes in tooling, just causes this to be
rebuilt:
CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o
LD /tmp/build/perf-urgent/trace/beauty/perf-in.o
addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/lkml/Yvzl8C7O1b+hf9GS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
2b1299322016731d ("x86/speculation: Add RSB VM Exit protections")
4af184ee8b2c0a69 ("tools/power turbostat: dump secondary Turbo-Ratio-Limit")
4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior")
d7caac991feeef1b ("x86/cpu/amd: Add Spectral Chicken")
6ad0ad2bf8a67e27 ("x86/bugs: Report Intel retbleed vulnerability")
c59a1f106f5cd484 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
465932db25f36648 ("x86/cpu: Add new VMX feature, Tertiary VM-Execution control")
027bbb884be006b0 ("KVM: x86/speculation: Disable Fill buffer clear within guests")
51802186158c74a0 ("x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-08-17 09:05:13.938246475 -0300
+++ after 2022-08-17 09:05:22.221455851 -0300
@@ -161,6 +161,7 @@
[0x0000048f] = "IA32_VMX_TRUE_EXIT_CTLS",
[0x00000490] = "IA32_VMX_TRUE_ENTRY_CTLS",
[0x00000491] = "IA32_VMX_VMFUNC",
+ [0x00000492] = "IA32_VMX_PROCBASED_CTLS3",
[0x000004c1] = "IA32_PMC0",
[0x000004d0] = "IA32_MCG_EXT_CTL",
[0x00000560] = "IA32_RTIT_OUTPUT_BASE",
@@ -212,6 +213,7 @@
[0x0000064D] = "PLATFORM_ENERGY_STATUS",
[0x0000064e] = "PPERF",
[0x0000064f] = "PERF_LIMIT_REASONS",
+ [0x00000650] = "SECONDARY_TURBO_RATIO_LIMIT",
[0x00000658] = "PKG_WEIGHTED_CORE_C0_RES",
[0x00000659] = "PKG_ANY_CORE_C0_RES",
[0x0000065A] = "PKG_ANY_GFXE_C0_RES",
$
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Like Xu <like.xu@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/YvzbT24m2o5U%2F7+q@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
7fa875b8e53c288d ("net: copy from user before calling __copy_msghdr")
ebe73a284f4de8c5 ("net: Allow custom iter handler in msghdr")
7c701d92b2b5e517 ("skbuff: carry external ubuf_info in msghdr")
c04245328dd7e915 ("net: make __sys_accept4_file() static")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: David Ahern <dsahern@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/lkml/YvzYs+F+Xzq8Hvvp@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
xfstests on smb21 report kmemleak as below:
unreferenced object 0xffff8881767d6200 (size 64):
comm "xfs_io", pid 1284, jiffies 4294777434 (age 20.789s)
hex dump (first 32 bytes):
80 5a d0 11 81 88 ff ff 78 8a aa 63 81 88 ff ff .Z......x..c....
00 71 99 76 81 88 ff ff 00 00 00 00 00 00 00 00 .q.v............
backtrace:
[<00000000ad04e6ea>] cifs_close+0x92/0x2c0
[<0000000028b93c82>] __fput+0xff/0x3f0
[<00000000d8116851>] task_work_run+0x85/0xc0
[<0000000027e14f9e>] do_exit+0x5e5/0x1240
[<00000000fb492b95>] do_group_exit+0x58/0xe0
[<00000000129a32d9>] __x64_sys_exit_group+0x28/0x30
[<00000000e3f7d8e9>] do_syscall_64+0x35/0x80
[<00000000102e8a0b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
When cancel the deferred close work, we should also cleanup the struct
cifs_deferred_close.
Fixes: 9e992755be8f2 ("cifs: Call close synchronously during unlink/rename/lease break.")
Fixes: e3fc065682ebb ("cifs: Deferred close performance improvements")
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
perf_cpu_map__max() computes the cpumap's maximum value, no need to
iterate over all values.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220614143353.1559597-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Brian Norris
Yang Yingliang
Wolfram Sang
Tejun Heo
Christoph Hellwig
Linus Torvalds
Steven Rostedt (Google)
Yang Jihong
Lukas Bulwahn
Nick Desaulniers
Uwe Kleine-König
Wolfram Sang
Guru Das Srinagesh
Masahiro Yamada
Nathan Chancellor
Jiri Slaby
John Garry
Namhyung Kim
Arnaldo Carvalho de Melo
Ian Rogers
Zhang Xiaoxu