| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix warning when building with CONFIG_PM=n (and CONFIG_WERROR=y):
drivers/hwmon/nzxt-smart2.c:707:12: error: ‘nzxt_smart2_hid_reset_resume’
defined but not used [-Werror=unused-function]
707 | static int nzxt_smart2_hid_reset_resume(struct hid_device *hdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Link: https://lore.kernel.org/r/20211228014813.832491-1-mezin.alexander@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When desiring the whole struct to be packed, __packed
should be applied to the whole struct, not just
every struct member except the first one.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20211221162805.104202-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
WMI monitoring methods can be changed or removed in new ASUS boards
BIOS versions. Such versions return zero instead of a real one as
Chip ID.
Commit adds additional validation for the result of Chip ID call
before enabling access by ASUS WMI methods.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Link: https://lore.kernel.org/r/20211218205206.615865-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
the correct value should be 0x100. The register ip_tmr is expressed
in units of IP clk cycles, in accordance with the datasheet.
Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Arseny Demidov <a.demidov@yadro.com>
Link: https://lore.kernel.org/r/20211219102239.1112-1-a.demidov@yadro.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is a spelling mistake in the module description, fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211220155527.179125-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The chip series supported by this driver are voltage regulators, so expose
them to the regulator subsystem.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20211213142814.264802-4-arthur.heymans@9elements.com
[groeck: Added brief patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the missing of_match_table to allow device tree probing.
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Link: https://lore.kernel.org/r/20211213142814.264802-3-arthur.heymans@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The IR38060, IR38164 and IR38263 can be supported using this driver.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Link: https://lore.kernel.org/r/20211213142814.264802-2-arthur.heymans@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver implements monitoring and control of fans plugged into the
device. Besides typical speed monitoring and PWM duty cycle control,
voltage and current are reported for every fan.
The device also has 2 connectors for RGB LEDs, support for them isn't
implemented (mainly because there is no standardized sysfs interface).
Also, the device has a noise sensor, but the sensor seems to be completely
useless (and very imprecise), so support for it isn't implemented too.
The driver coexists with userspace tools that access the device through
hidraw interface with no known issues.
The driver has been tested on x86_64, built in and as a module.
Some changes/improvements were suggested by Jonas Malaco.
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Link: https://lore.kernel.org/r/20211031033058.151014-1-mezin.alexander@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ASUS ROG STRIX B550-A/X570-I GAMING boards have got an nct6775 chip, but
by default there's no use of it because of resource conflict with WMI
method.
This commit adds "ROG STRIX B550-A GAMING" and "ROG STRIX X570-I GAMING" to
the list of boards that can be monitored using ASUS WMI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Daniel Gibson <metalcaedes@gmail.com>
Tested-by: Michael Altizer <michael@theoddone.net>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/20211211180037.367062-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mp5023 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a Hot-Swap Controller.
Signed-off-by: Howard Chiu <howard.chiu@quantatw.com>
Link: https://lore.kernel.org/r/HKAPR04MB400349AA406694FB976D78D096709@HKAPR04MB4003.apcprd04.prod.outlook.com
[groeck: Added MODULE_IMPORT_NS, entry in index.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This is the integrated fan control module of the Delta AHE-50DC Open19
power shelf.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208213703.2577-3-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This device is an integrated module of the Delta AHE-50DC Open19 power
shelf. I haven't been able to procure any proper documentation for
it, but it seems to be a (somewhat minimally) PMBus-compliant device.
It provides four fan speeds, four temperatures (three standard and one
manufacturer-specific via a virtual second page), and a vin reading.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The command ./scripts/kernel-doc -none include/linux/hwmon.h warns:
include/linux/hwmon.h:406: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Channel information
include/linux/hwmon.h:425: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Chip configuration
Address those kernel-doc warnings by prefixing kernel-doc descriptions for
structs with the keyword 'struct'.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211216154257.26758-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This adds the Samsung 1404-001221 NTC thermistor to the
NTC thermistor driver. As far as I can tell it is electrically
compatible with the Murata 47K NTC thermistor.
This thermistor is mounted in a variety of Samsung products.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215174241.1496169-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver has been augmented to just use device properties
so the OF dependency can be dropped.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211215142933.1409324-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The only purpose of i8k_ioctl() is to call i8k_ioctl_unlocked()
with i8k_mutex held. Judging from the hwmon code, this mutex
only needs to be held when setting the fan speed/mode, so
the operation of I8K_SET_FAN is guaranteed to be atomic.
Unify both functions and reduce the locking of i8k_mutex
to I8K_SET_FAN.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The second switch-case has no real purpose:
- for I8K_BIOS_VERSION, val does not represent a return value,
making the check for error values unnecessary.
- for I8K_MACHINE_ID, val remains zero, so the error check is
unnecessary too.
Remove the switch-case and move the calls to copy_to_user()
into the first switch-case for I8K_BIOS_VERSION/_MACHINE_ID.
Omit buff[] since data->bios_machineid already contains the string
with the necessary zero padding through devm_kzalloc().
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Exit immediately if devm_hwmon_device_register_with_info()
fails since registering a delayed work whould be useless
in such a case anyway.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20211211184449.18211-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This code can fit on one line. No need to break it up.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211215114050.GB14967@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This moves the device tree match data toward the end of the
driver which is the convention, here we can also add ACPI
and similar match data in a conforming manner.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211205235948.4167075-3-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This switches to retrieveing the configuration of the NTC
from generic firmware properties so that we get neutral from
device tree: now ACPI or, more importantly, software nodes
can be used to spawn NTC devices provided they have the
required properties.
This was inspired by the similar changes made to the IIO
drivers.
This was tested on the Ux500 HREF with the NTC devices
probing from device tree just as fine after this as before.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Move the parsing of the DT config right above probe().
Allocate the state container for the driver in probe()
instead of inside the DT config parsing function: as a
result return an int instead of a pointer.
Drop the check for !np: we can only probe from DT right
now so no risk of ending up here.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206020423.62402-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Variable range is being initialized with a value that is never read, it
is being re-assigned in the next statement. The assignment is redundant,
remove it and initialize range using the second assigned value. Clean up
the formatting too by adding missing spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211204233155.55454-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Smatch detects this array overflow:
drivers/hwmon/asus_wmi_sensors.c:569 asus_wmi_configure_sensor_setup()
error: buffer overflow 'hwmon_attributes' 8 <= 9
The hwmon_attributes[] array should have "hwmon_max" so that it gets
larger when more attributes are added.
Fixes: 9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105117.GH5827@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Smatch detected an array out of bounds error:
drivers/hwmon/asus_wmi_ec_sensors.c:562 asus_wmi_ec_configure_sensor_setup()
error: buffer overflow 'hwmon_attributes' 8 <= 9
The hwmon_attributes[] array needs to be declared with "hwmon_max"
elements.
Fixes: c04c7f7bfcbe ("hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105034.GG5827@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This patch enables automatic loading of the sht4x module via a device
tree table entry.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Link: https://lore.kernel.org/r/20211121160637.2312106-1-davidm@egauge.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Allocate one state container for the device: struct ntc_data.
Move all items from struct ntc_thermistor_platform_data into
this struct and simplify.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-5-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The only possible assignment of a function to get a voltage to
convert to a resistance is to use the internal function
ntc_adc_iio_read() which is only available when using IIO
and OF.
Bite the bullet and mandate OF and IIO, drop the read_uv()
callback abstraction and some ifdefs.
As no board is using the platform data, all users are using
OF and IIO anyway.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-4-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Nothing in the kernel (this driver) is using the callback to
read ohms directly. We always read a voltage and convert it
to a resistance. Drop this callback.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-3-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Platform data is supposed to be used with "board files",
device descriptions in C. Since the introduction of the
NTC driver in 2011, no such platforms have been submitted
to the Linux kernel, and their use is strongly discouraged
in favor of Device Tree, ACPI or as last resort software
firmware nodes.
Drop the external header and copy the platform data into
the driver file.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
N34TS04 is a JC42.4 compatible temperature sensor from ONSEMI.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The current driver can read the temperatures from upto 8 CCDs
(Core-Complex Die).
The newer AMD Family 19h Models 10h-1Fh and A0h-AFh can support up to
12 CCDs. Update the driver to read up to 12 CCDs.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163776976762.904164.5618896687524494215.stgit@bmoger-ubuntu
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Provides a Linux kernel module "asus_wmi_sensors" that provides sensor
readouts via ASUS' WMI interface present in the UEFI of
X370/X470/B450/X399 Ryzen motherboards.
Supported motherboards:
* ROG CROSSHAIR VI HERO,
* PRIME X399-A,
* PRIME X470-PRO,
* ROG CROSSHAIR VI EXTREME,
* ROG CROSSHAIR VI HERO (WI-FI AC),
* ROG CROSSHAIR VII HERO,
* ROG CROSSHAIR VII HERO (WI-FI),
* ROG STRIX B450-E GAMING,
* ROG STRIX B450-F GAMING,
* ROG STRIX B450-I GAMING,
* ROG STRIX X399-E GAMING,
* ROG STRIX X470-F GAMING,
* ROG STRIX X470-I GAMING,
* ROG ZENITH EXTREME,
* ROG ZENITH EXTREME ALPHA.
Co-developed-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
[groeck: Squashed:
"hwmon: Fix warnings in asus_wmi_sensors.rst documetation."]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Linux HWMON sensors driver for ASUS motherboards to read
sensors from the embedded controller.
Many ASUS motherboards do not publish all the available
sensors via the Super I/O chip but the missing ones are
available through the embedded controller (EC) registers.
This driver implements reading those sensor data via the
WMI method BREC, which is known to be present in all ASUS
motherboards based on the AMD 500 series chipsets (and
probably is available in other models too). The driver
needs to know exact register addresses for the sensors and
thus support for each motherboard has to be added explicitly.
The EC registers do not provide critical values for the
sensors and as such they are not published to the HWMON.
Supported motherboards:
* PRIME X570-PRO
* Pro WS X570-ACE
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII DARK HERO
* ROG CROSSHAIR VIII FORMULA
* ROG STRIX X570-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX B550-E GAMING
Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Tor Vic <torvic9@mailbox.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This adds hardware monitor support the Fintek F81966 Super I/O chip.
Testing was done on the Aaeon SSE-IPTI
Signed-off-by: Menghui Wu <Menghui_Wu@aaeon.com.tw>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20211117024320.2428144-1-acelan.kao@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The adm1021 driver is quite generous with its automatic chip detection
and easily misdetects several chips. Strengthen detection of MAX1617,
MAX1617A, and LM84 to make the driver less vulnerable to false matches.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since we are using regmap access functions to write into chip registers,
we can hide the difference in register write addresses within regmap
code. By doing this we do not need to clear the regmap cache on register
writes, and the high level code does not need to bother about different
read/write register addresses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use regmap for register accesses to be able to utilize its caching
functionality. This also lets us hide register access differences
in regmap code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The new API is cleaner and reduces code size significantly.
All chip accesses are 'hidden' in chip access to prepare for using
regmap. Local caching code is removed, to be replaced by regmap based
caching in a follow-up patch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The difference between TMP431 and other chips of this series is that the
TMP431 has an additional sensor. The register addresses for other sensors
are the same for all chips. It is therefore unnecessary to maintain two
different arrays for TMP431 and the other chips. Just use the same array
for all chips and add the TMP431 register addresses as third column.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA238 is a I2C power monitor similar to other INA2xx devices,
providing shunt voltage, bus voltage, current, power and temperature
measurements.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a property to the binding to define the selected shunt voltage gain.
This specifies the range and accuracy that applies to the shunt circuit.
This property only applies to devices that have a selectable shunt
voltage range via PGA or ADCRANGE register configuration.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-2-nathan@nathanrossi.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document the compatible string for the Texas Instruments INA238, this
device is a variant of the existing INA2xx devices and has the same
device tree bindings (shunt resistor).
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-1-nathan@nathanrossi.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add thermal info support for AMD Family 19h Models 10h-1Fh and A0h-AFh.
Thermal info is supported via a new PCI device ID at offset 0x300h.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640829419.955062.12539219969781039915.stgit@bmoger-ubuntu
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Usage of these definitions were removed after the commit 0a4e668b5d52
("hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs").
So, cleanup them up.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640828776.955062.15863375803675701204.stgit@bmoger-ubuntu
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the new PCI Device IDs to support new generation of AMD 19h family of
processors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Link: https://lore.kernel.org/r/163640828133.955062.18349019796157170473.stgit@bmoger-ubuntu
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840
Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Aleksandr Mezin
Armin Wolf
Denis Pauk
Arseny Demidov
Colin Ian King
Patrick Rudolph
Arthur Heymans
Howard.Chiu@quantatw.com
Zev Weiss
Lukas Bulwahn
Linus Walleij
Dan Carpenter
David Mosberger-Tang
Guenter Roeck
Babu Moger
Menghui Wu
Nathan Rossi
Yazen Ghannam
Linus Torvalds
Liu Shixin
SeongJae Park