aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-08-23IB/core: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-8/+3
* Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. * The local variable "ret" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23IB/qib: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-21/+5
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22iw_cxgb4: use the MPA initiator's IRD if < our ORDSteve Wise1-1/+1
The i40iw initiator sends an MPA-request with ird=16 and ord=16. The cxgb4 responder sends an MPA-reply with ord = 32 causing i40iw to terminate due to insufficient resources. The logic to reduce the ORD to <= peer's IRD was wrong. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22iw_cxgb4: limit IRD/ORD advertised to ULP by device max.Steve Wise1-0/+4
The i40iw initiator sends an MPA-request with ird = 63, ord = 63. The cxgb4 responder sends a RST. Since the inbound ord=63 and it exceeds the max_ird/c4iw_max_read_depth (=32 default), chelsio decides to abort. Instead, cxgb4 should adjust the ord/ird down before presenting it to the ULP. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Fix mm_struct use after freeIra Weiny1-0/+2
Testing with CONFIG_SLUB_DEBUG_ON=y resulted in the kernel panic below. This is the result of the mm_struct sometimes being free'd prior to hfi1_file_close being called. This was due to the combination of 2 reasons: 1) hfi1_file_close is deferred in process exit and it therefore may not be called synchronously with process exit. 2) exit_mm is called prior to exit_files in do_exit. Normally this is ok however, our kernel bypass code requires us to have access to the mm_struct for house keeping both at "normal" close time as well as at process exit. Therefore, the fix is to simply keep a reference to the mm_struct until we are done with it. [ 3006.340150] general protection fault: 0000 [#1] SMP [ 3006.346469] Modules linked in: hfi1 rdmavt rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod snd_hda_code c_realtek iTCO_wdt snd_hda_codec_generic iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass c rct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw snd_hda_intel gf128mul snd_hda_codec glue_helper snd_hda_core ablk_helper sn d_hwdep cryptd snd_seq snd_seq_device snd_pcm snd_timer snd soundcore pcspkr shpchp mei_me sg lpc_ich mei i2c_i801 mfd_core ioatdma ipmi_devi ntf wmi ipmi_si ipmi_msghandler acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 jbd2 mbcache mlx4_en ib_core sr_mod s d_mod cdrom crc32c_intel mgag200 drm_kms_helper syscopyarea sysfillrect igb sysimgblt fb_sys_fops ptp mlx4_core ttm isci pps_core ahci drm li bsas libahci dca firewire_ohci i2c_algo_bit scsi_transport_sas firewire_core crc_itu_t i2c_core libata [last unloaded: mlx4_ib] [ 3006.461759] CPU: 16 PID: 11624 Comm: mpi_stress Not tainted 4.7.0-rc5+ #1 [ 3006.469915] Hardware name: Intel Corporation W2600CR ........../W2600CR, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 3006.483027] task: ffff8804102f0040 ti: ffff8804102f8000 task.ti: ffff8804102f8000 [ 3006.491971] RIP: 0010:[<ffffffff810f0383>] [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0 [ 3006.501905] RSP: 0018:ffff8804102fb908 EFLAGS: 00010002 [ 3006.508447] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000 [ 3006.517012] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880410b56a40 [ 3006.525569] RBP: ffff8804102fb9b0 R08: 0000000000000001 R09: 0000000000000000 [ 3006.534119] R10: ffff8804102f0040 R11: 0000000000000000 R12: 0000000000000000 [ 3006.542664] R13: ffff880410b56a40 R14: 0000000000000000 R15: 0000000000000000 [ 3006.551203] FS: 00007ff478c08700(0000) GS:ffff88042e200000(0000) knlGS:0000000000000000 [ 3006.560814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3006.567806] CR2: 00007f667f5109e0 CR3: 0000000001c06000 CR4: 00000000000406e0 [ 3006.576352] Stack: [ 3006.579157] ffffffff8124b819 ffffffffffffffff 0000000000000000 ffff8804102fb940 [ 3006.588072] 0000000000000002 0000000000000000 ffff8804102f0040 0000000000000007 [ 3006.596971] 0000000000000006 ffff8803cad6f000 0000000000000000 ffff8804102f0040 [ 3006.605878] Call Trace: [ 3006.609220] [<ffffffff8124b819>] ? uncharge_batch+0x109/0x250 [ 3006.616382] [<ffffffff810f2313>] lock_acquire+0xd3/0x220 [ 3006.623056] [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.631593] [<ffffffff81775579>] down_write+0x49/0x80 [ 3006.638022] [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.646569] [<ffffffffa0a30bfc>] hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.654898] [<ffffffffa0a2efb6>] cacheless_tid_rb_remove+0x106/0x330 [hfi1] [ 3006.663417] [<ffffffff810efd36>] ? mark_held_locks+0x66/0x90 [ 3006.670498] [<ffffffff817771f6>] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 3006.678741] [<ffffffffa0a2f1ee>] tid_rb_remove+0xe/0x10 [hfi1] [ 3006.686010] [<ffffffffa0a0c5d5>] hfi1_mmu_rb_unregister+0xc5/0x100 [hfi1] [ 3006.694387] [<ffffffffa0a2fcb9>] hfi1_user_exp_rcv_free+0x39/0x120 [hfi1] [ 3006.702732] [<ffffffffa09fc6ea>] hfi1_file_close+0x17a/0x330 [hfi1] [ 3006.710489] [<ffffffff81263e9a>] __fput+0xfa/0x230 [ 3006.716595] [<ffffffff8126400e>] ____fput+0xe/0x10 [ 3006.722696] [<ffffffff810b95c6>] task_work_run+0x86/0xc0 [ 3006.729379] [<ffffffff81099933>] do_exit+0x323/0xc40 [ 3006.735672] [<ffffffff8109a2dc>] do_group_exit+0x4c/0xc0 [ 3006.742371] [<ffffffff810a7f55>] get_signal+0x345/0x940 [ 3006.748958] [<ffffffff810340c7>] do_signal+0x37/0x700 [ 3006.755328] [<ffffffff8127872a>] ? poll_select_set_timeout+0x5a/0x90 [ 3006.763146] [<ffffffff811609cb>] ? __audit_syscall_exit+0x1db/0x260 [ 3006.770853] [<ffffffff8110f3e3>] ? rcu_read_lock_sched_held+0x93/0xa0 [ 3006.778765] [<ffffffff812347a4>] ? kfree+0x1e4/0x2a0 [ 3006.784986] [<ffffffff8108e75a>] ? exit_to_usermode_loop+0x33/0xac [ 3006.792551] [<ffffffff8108e785>] exit_to_usermode_loop+0x5e/0xac [ 3006.799907] [<ffffffff81003dca>] do_syscall_64+0x12a/0x190 [ 3006.806664] [<ffffffff81777a7f>] entry_SYSCALL64_slow_path+0x25/0x25 [ 3006.814396] Code: 24 08 44 89 44 24 10 89 4c 24 18 e8 a8 d8 ff ff 48 85 c0 8b 4c 24 18 44 8b 44 24 10 44 8b 4c 24 08 4c 8b 14 24 0f 84 30 08 00 00 <f0> ff 80 98 01 00 00 8b 3d 48 ad be 01 45 8b a2 90 0b 00 00 85 [ 3006.837158] RIP [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0 [ 3006.844401] RSP <ffff8804102fb908> [ 3006.851170] ---[ end trace b7b9f21cf06c27df ]--- [ 3006.927420] Kernel panic - not syncing: Fatal exception [ 3006.933954] Kernel Offset: disabled [ 3006.940961] ---[ end Kernel panic - not syncing: Fatal exception [ 3006.948249] ------------[ cut here ]------------ Fixes: 3faa3d9a308e ("IB/hfi1: Make use of mm consistent") Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/rdmvat: Fix double vfree() in rvt_create_qp() error pathMike Marciniszyn1-1/+2
The unwind logic for creating a user QP has a double vfree of the non-shared receive queue when handling a "too many qps" failure. The code unwinds the mmmap info by decrementing a reference count which will call rvt_release_mmap_info() which in turn does the vfree() of the r_rq.wq. The unwind code then does the same free. Fix by guarding the vfree() with the same test that is done in close and only do the vfree() if qp->ip is NULL. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Improve J_KEY generationMitko Haralanov1-1/+18
Previously, J_KEY generation was based on the lower 16 bits of the user's UID. While this works, it was not good enough as a non-root user could collide with a root user given a sufficiently large UID. This patch attempt to improve the J_KEY generation by using the following algorithm: The 16 bit J_KEY space is partitioned into 3 separate spaces reserved for different user classes: * all users with administtor privileges (including 'root') will use J_KEYs in the range of 0 to 31, * all kernel protocols, which use KDETH packets will use J_KEYs in the range of 32 to 63, and * all other users will use J_KEYs in the range of 64 to 65535. The above separation is aimed at preventing different user levels from sending packets to each other and, additionally, separate kernel protocols from all other types of users. The later is meant to prevent the potential corruption of kernel memory by any other type of user. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Return invalid field for non-QSFP CableInfo queriesEaswar Hariharan1-0/+5
The driver does not check if the CableInfo query is supported for the port type. Return early if CableInfo is not supported for the port type, making compliance with the specification explicit and preventing lower level code from potentially doing the wrong thing if the query is not supported for the hardware implementation. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22MAINTAINERS: Fix Soft RoCE locationLeon Romanovsky1-1/+1
The Soft RoCE (rxe) is located in drivers/inifiniband/sw and not in drivers/infiniband/hw/. This patch fixes it. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/usnic: Fix error return codeChristophe Jaillet1-1/+2
If 'pci_register_driver' fails, we return 'err' which is known to be 0. Return the error instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Add missing error code assignment before testChristophe Jaillet1-1/+1
It is likely that checking the result of 'setup_ctxt' is expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Using kfree_rcu() to simplify the codeWei Yongjun3-10/+2
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Validate header in set_armed_activeMike Marciniszyn1-1/+2
Validate the etype to insure that the header is correct. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Pass packet ptr to set_armed_activeMike Marciniszyn1-5/+5
The "packet" parameter was being passed on the stack, change it to a pointer. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Fetch monitor values on-demand for CableInfo queryEaswar Hariharan2-2/+33
The monitor values from bytes 22 through 81 of the QSFP memory space (SFF 8636) are dynamic and serving them out of the QSFP memory cache maintained by the driver provides stale data to the CableInfo SMA query. This patch refreshes the dynamic values from the QSFP memory on request and overwrites the stale data from the cache for the overlap between the requested range and the monitor range. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1,IB/qib: Fix qp_stats sleep with rcu read lock heldMike Marciniszyn4-16/+18
The qp init function does a kzalloc() while holding the RCU lock that encounters the following warning with a debug kernel when a cat of the qp_stats is done: [ 231.723948] rcu_scheduler_active = 1, debug_locks = 0 [ 231.731939] 3 locks held by cat/11355: [ 231.736492] #0: (debugfs_srcu){......}, at: [<ffffffff813001a5>] debugfs_use_file_start+0x5/0x90 [ 231.746955] #1: (&p->lock){+.+.+.}, at: [<ffffffff81289a6c>] seq_read+0x4c/0x3c0 [ 231.755873] #2: (rcu_read_lock){......}, at: [<ffffffffa0a0c535>] _qp_stats_seq_start+0x5/0xd0 [hfi1] [ 231.766862] The init functions do an implicit next which requires the rcu read lock before the kzalloc(). Fix for both drivers is to change the scope of the init function to only do the allocation and the initialization of the just allocated iter. The implict next is moved back into the respective start functions to fix the issue. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> CC: <stable@vger.kernel.org> # 4.6.x- Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Remove duplicated include from affinity.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/isert: fix error return code in isert_alloc_login_buf()Wei Yongjun1-1/+1
Fix to return error code -ENOMEM from the alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/core: Fix possible memory leak in cma_resolve_iboe_route()Wei Yongjun1-6/+12
'work' and 'route->path_rec' are malloced in cma_resolve_iboe_route() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 200298326b27 ('IB/core: Validate route when we init ah') Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Allocate cpu mask on the heap to silence warningTadeusz Struk1-7/+13
If CONFIG_FRAME_WARN is small (1K) and CONFIG_NR_CPUS big then a frame size warning is triggered during build. Allocate the cpu mask dynamically to silence the warning. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_oneYuval Shaia1-3/+3
Error code EAGAIN should be used when errors are temporary and next call might succeeds. When error code other than EAGAIN is returned, the caller (mlx4_ib_poll) will assume all CQE in the same bunch are error too and will drop them all. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/mlx4: Make function use_tunnel_data return voidYuval Shaia1-7/+7
No need to return int if function always returns 0 Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-21Linux 4.8-rc3Linus Torvalds1-1/+1
2016-08-21EDAC, skx_edac: Add EDAC driver for SkylakeTony Luck4-0/+1136
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-20parisc: Fix order of EREFUSED define in errno.hHelge Deller1-2/+2
When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2016-08-20parisc: Fix automatic selection of cr16 clocksourceHelge Deller2-20/+0
Commit 54b66800907 (parisc: Add native high-resolution sched_clock() implementation) added support to use the CPU-internal cr16 counters as reliable clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK. Sadly the commit missed to remove the hack which prevented cr16 to become the default clocksource even on SMP systems. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.7+
2016-08-19Make the hardened user-copy code depend on having a hardened allocatorLinus Torvalds1-0/+1
The kernel test robot reported a usercopy failure in the new hardened sanity checks, due to a page-crossing copy of the FPU state into the task structure. This happened because the kernel test robot was testing with SLOB, which doesn't actually do the required book-keeping for slab allocations, and as a result the hardening code didn't realize that the task struct allocation was one single allocation - and the sanity checks fail. Since SLOB doesn't even claim to support hardening (and you really shouldn't use it), the straightforward solution is to just make the usercopy hardening code depend on the allocator supporting it. Reported-by: kernel test robot <xiaolong.ye@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-18locking/barriers: Suppress sparse warnings in lockless_dereference()Johannes Berg1-3/+3
After Peter's commit: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"Johannes Berg1-1/+1
This reverts commit: fa7d81bb3c269 ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference") As Peter explained: [...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker. [...] Also, clue is in the name: 'dereference', you don't actually dereference the pointer here, only load it. My next patch breaks the compile without this revert, because it assumes you want to deference and thus also need the struct type visible (which it isn't here), so revert it. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1470909022-687-1-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18arm64: Fix shift warning in arch/arm64/mm/dump.cCatalin Marinas1-3/+3
When building with 48-bit VAs and 16K page configuration, it's possible to get the following warning when building the arm64 page table dumping code: arch/arm64/mm/dump.c: In function ‘walk_pud’: arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow] This is because pud_offset(pgd, 0) performs a shift to the right by 36 while the value 0 has the type 'int' by default, therefore 32-bit. This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to use 0UL for the address argument. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-18sched/cputime: Resync steal time when guest & host lose syncWanpeng Li1-3/+15
Commit: 57430218317e ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: Rik van Riel <riel@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regressionPeter Zijlstra1-5/+10
Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: stable@vger.kernel.org # 4.3+ Fixes: 9d7fb0427648 ("sched/cputime: Guarantee stime + utime == rtime") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Check return value of the perf_event_read() IPIDavid Carrillo-Cisneros1-3/+4
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Enable mapping of the stop filtersMathieu Poirier1-10/+5
At this time the perf_addr_filter_needs_mmap() function will _not_ return true on a user space 'stop' filter. But stop filters need exactly the same kind of mapping that range and start filters get. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Update filters only on executable mmapMathieu Poirier1-0/+7
Function perf_event_mmap() is called by the MM subsystem each time part of a binary is loaded in memory. There can be several mapping for a binary, many times unrelated to the code section. Each time a section of a binary is mapped address filters are updated, event when the map doesn't pertain to the code section. The end result is that filters are configured based on the last map event that was received rather than the last mapping of the code segment. For example if we have an executable 'main' that calls library 'libcstest.so.1.0', and that we want to collect traces on code that is in that library. The perf cmd line for this scenario would be: perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main Resulting in binaries being mapped this way: root@linaro-nano:~# cat /proc/1950/maps 00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main 00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main 00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main 7fa2464000-7fa2474000 rw-p 00000000 00:00 0 7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0 7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0 7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0 7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar] 7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso] 7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack] root@linaro-nano:~# Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in memory. Once that has been done perf_event_mmap() has been called 4 times, with the last map starting at address 0x7fa25ce000 and the address filter configured to start filtering when the IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c). But that is wrong since the code segment for library 'libcstest.so.1.0' as been mapped at 0x7fa25bd000, resulting in traces not being collected. This patch corrects the situation by requesting that address filters be updated only if the mapped event is for a code segment. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix file name handling for start/stop filtersMathieu Poirier1-2/+4
Binary file names have to be supplied for both range and start/stop filters but the current code only processes the filename if an address range filter is specified. This code adds processing of the filename for start/stop filters. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix event_function_local()Peter Zijlstra1-12/+48
Vincent reported triggering the WARN_ON_ONCE() in event_function_local(). While thinking through cases I noticed that by using event_function() directly, we miss the inactive case usually handled by event_function_call(). Therefore construct a blend of event_function_call() and event_function() that handles the cases relevant to event_function_local(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 4.5+ Fixes: fae3fde65138 ("perf: Collapse and fix event_function_call() users") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/smp: Fix __max_logical_packages value setupJiri Olsa1-9/+16
Frank reported kernel panic when he disabled several cores in BIOS via following option: Core Disable Bitmap(Hex) [0] with number 0xFFE, which leaves 16 CPUs in system (out of 48). The kernel panic below goes along with following messages: smpboot: Max logical packages: 2^M smpboot: APIC(0) Converting physical 0 to logical package 0^M smpboot: APIC(20) Converting physical 1 to logical package 1^M smpboot: APIC(40) Package 2 exceeds logical package map^M smpboot: CPU 8 APICId 40 disabled^M smpboot: APIC(60) Package 3 exceeds logical package map^M smpboot: CPU 12 APICId 60 disabled^M ... general protection fault: 0000 [#1] SMP^M Modules linked in:^M CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M ... [<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M [<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M [<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M [<ffffffff81002190>] do_one_initcall+0x50/0x190^M [<ffffffff810ab193>] ? parse_args+0x293/0x480^M [<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M [<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M [<ffffffff816dc19e>] kernel_init+0xe/0x110^M [<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M [<ffffffff816dc190>] ? rest_init+0x80/0x80^M The reason for the panic is wrong value of __max_logical_packages, which lets logical_package_map uninitialized and the uncore code relying on this map being properly initialized (maybe we should add some safety checks there as well). The __max_logical_packages is computed as: DIV_ROUND_UP(total_cpus, ncpus); - ncpus being number of cores With above BIOS setup we get total_cpus == 16 which set __max_logical_packages to 2 (ncpus is 12). Once topology_update_package_map processes CPU with logical pkg over 2 we display above messages and fail to initialize the physical_to_logical_pkg map, which makes the uncore code crash. The fix is to remove logical_package_map bitmap completely and keep and update the logical_packages number instead. After we enumerate all the present CPUs, we check if the enumerated logical packages count is within its computed maximum from BIOS data. If it's not the case, we set this maximum to the new enumerated value and freeze any new addition of logical packages. The freeze is because lot of init code like uncore/rapl/cqm depends on having maximum logical package value set to allocate their data, so we can't change it later on. Prarit Bhargava tested the patch and confirms that it solves the problem: From dmidecode: Core Count: 24 Core Enabled: 24 Thread Count: 48 Orig kernel boot log: [ 0.464981] smpboot: Max logical packages: 19 [ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3 1. nr_cpus=8, should stop enumerating in package 0: [ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.539596] smpboot: Max logical packages: 19 2. max_cpus=8, should still enumerate all packages: [ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.550524] smpboot: Max logical packages: 19 3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in package 2: [ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.539368] smpboot: Max logical packages: 19 4. maxcpus=49, should still enumerate all packages: [ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.549624] smpboot: Max logical packages: 19 5. kdump (nr_cpus=1) works as well. Reported-by: Frank Ramsay <framsay@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=yBorislav Petkov1-1/+8
Similar to: efaad554b4ff ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y") ... fix microcode loading from the initrd on AMD by adding the randomization offset to the microcode patch container within the initrd. Reported-and-tested-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18uprobes: Fix the memcg accountingOleg Nesterov1-2/+3
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b531c47 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17net_sched: allow flushing tc police actionsRoman Mashak1-42/+1
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: unify the init logic for act_policeWANG Cong1-9/+10
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe56971 ("act_police: fix a crash during removal") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: convert tcf_exts from list to pointer arrayWANG Cong7-41/+85
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: move tc offload macros to pkt_cls.hWANG Cong2-16/+22
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: fix a typo in tc_for_each_action()WANG Cong1-1/+1
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove an unnecessary list_del()WANG Cong1-1/+0
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc4495 ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove the leftover cleanup_a()WANG Cong1-19/+3
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Allow packets to be trapped from any PGIdo Schimmel1-1/+1
When packets enter the device they are classified to a priority group (PG) buffer based on their PCP value. After their egress port and traffic class are determined they are moved to the switch's shared buffer and await transmission, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Packets scheduled to transmission through CPU port (trapped to CPU) use traffic class 7, which has a zero maximum and minimum quotas. However, when such packets arrive from PG 0 they are admitted to the shared buffer as PG 0 has a non-zero minimum quota. Allow all packets to be trapped to the CPU - regardless of the PG they were classified to - by assigning a 10KB minimum quota for CPU port and TC7. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Unmap 802.1Q FID before destroying itIdo Schimmel1-0/+2
Before destroying the 802.1Q FID we should first remove the VID-to-FID mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to mlxsw_sp_fid_create(). Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Add missing rollbacks in error pathIdo Schimmel1-1/+3
While going over the code I noticed we are missing two rollbacks in the port's creation error path. Add them and adjust the place of one of them in the port's removal sequence so that both are symmetric. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.