aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-29drm/etnaviv: submit support for in-fencesPhilipp Zabel6-3/+46
Loosely based on commit f0a42bb5423a ("drm/msm: submit support for in-fences"). Unfortunately, struct drm_etnaviv_gem_submit doesn't have a flags field yet, so we have to extend the structure and trust that drm_ioctl will clear the flags for us if an older userspace only submits part of the struct. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-29drm/etnaviv: add etnaviv cooling deviceRussell King2-15/+71
Each Vivante GPU contains a clock divider which can divide the GPU clock by 2^n, which can lower the power dissipation from the GPU. It has been suggested that the GC600 on Dove is responsible for 20-30% of the power dissipation from the SoC, so lowering the GPU clock rate provides a way to throttle the power dissiptation, and reduce the temperature when the SoC gets hot. This patch hooks the Etnaviv driver into the kernel's thermal management to allow the GPUs to be throttled when necessary, allowing a reduction in GPU clock rate from /1 to /64 in power of 2 steps. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-29drm/etnaviv: switch to postcloseDaniel Vetter1-2/+2
I didn't spot anything that would require ordering here (well not anywhere else either), and I'm trying to unify at least modern drivers on one close hook. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-29drm/etnaviv: add lockdep assert to fence allocationLucas Stach1-0/+6
Make sure the GPU lock is taken, so that fence completion order matches seqno order. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-21drm/edid: detect SCDC support in HF-VSDBShashank Sharma5-2/+199
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
2017-03-21drm/edid: detect SCDC support in HF-VSDBShashank Sharma2-0/+47
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Rebase. V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
2017-03-21drm/edid: check for HF-VSDB blockThierry Reding2-0/+16
This patch implements a small function that finds if a given CEA db is hdmi-forum vendor specific data block or not. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
2017-03-21drm: Add SCDC helpersThierry Reding4-1/+269
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
2017-03-21drm: bridge: dw-hdmi: add HDMI vendor specific infoframe configNickey Yang2-0/+57
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com
2017-03-21drm/bridge: dw_hdmi: support i2c extended read modeNickey Yang1-14/+24
"I2C Master Interface Extended Read Mode" implements a segment pointer-based read operation using the Special Register configuration. This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned "The current implementation does not support "I2C Master Interface Extended Read Mode" to read data addressed by non-zero segment pointer, this means that if EDID has more than 1 extension blocks, EDID reading operation won't succeed" With this patch, dw-hdmi can read EDID data with 1/2/4 blocks. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1489978651-16647-1-git-send-email-nickey.yang@rock-chips.com
2017-03-20drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanupArnd Bergmann1-0/+2
We now call those two functions even when they are not defined or declared anywhere because DEBUG_FS is disabled: drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit': drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] This adds empty stub implementations for that case. Fixes: 85eac4700ede ("drm/msm: Remove msm_debugfs_cleanup()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de
2017-03-20drm: bochs: Don't remove uninitialized fbdev framebufferGabriel Krisman Bertazi1-5/+4
In the same spirit of the fix for QXL in commit 861078381ba5 ("drm: qxl: Don't alloc fbdev if emulation is not supported"), prevent the Oops in the unbind path of Bochs if fbdev emulation is disabled. [ 112.176009] Oops: 0002 [#1] SMP [ 112.176009] Modules linked in: bochs_drm [ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111 [ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000 [ 112.176009] RIP: 0010:mutex_lock+0x18/0x30 [ 112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246 [ 112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000 [ 112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260 [ 112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff [ 112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260 [ 112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060 [ 112.176009] FS: 00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0 [ 112.176009] Call Trace: [ 112.176009] drm_mode_object_unregister+0x1e/0x50 [ 112.176009] drm_framebuffer_unregister_private+0x15/0x20 [ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm] [ 112.176009] bochs_unload+0x16/0x50 [bochs_drm] [ 112.176009] drm_dev_unregister+0x37/0xd0 [ 112.176009] drm_put_dev+0x31/0x60 [ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm] [ 112.176009] pci_device_remove+0x34/0xb0 [ 112.176009] device_release_driver_internal+0x150/0x200 [ 112.176009] device_release_driver+0xd/0x10 [ 112.176009] unbind_store+0x108/0x150 [ 112.176009] drv_attr_store+0x20/0x30 [ 112.176009] sysfs_kf_write+0x32/0x40 [ 112.176009] kernfs_fop_write+0x10b/0x190 [ 112.176009] __vfs_write+0x23/0x120 [ 112.176009] ? security_file_permission+0x36/0xb0 [ 112.176009] ? rw_verify_area+0x49/0xb0 [ 112.176009] vfs_write+0xb0/0x190 [ 112.176009] SyS_write+0x41/0xa0 [ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 112.176009] RIP: 0033:0x7f2055bd5620 [ 112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620 [ 112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001 [ 112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40 [ 112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000 [ 112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000 [ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3 [ 112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78 [ 112.176009] CR2: 0000000000000260 [ 112.205622] ---[ end trace 76189cd7a9bdd155 ]--- Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-03-20drm/i915: Update DRIVER_DATE to 20170320Daniel Vetter1-2/+2
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-03-19Linux 4.11-rc3Linus Torvalds1-1/+1
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds1-1/+1
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran6-20/+81
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran7-40/+100
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani2-4/+90
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran6-65/+279
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add async new target notificationQuinn Tran2-3/+4
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Export DIF stats via debugfsAnil Gurumurthy2-0/+27
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran7-251/+406
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran4-8/+32
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran1-23/+18
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran1-2/+10
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix request queue corruption.Quinn Tran1-3/+9
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix memory leak for abts processingQuinn Tran1-0/+2
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio5-10/+16
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: Convert cmd_time_out into backend device attributeNicholas Bellinger1-26/+68
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: make cmd timeout configurableMike Christie1-6/+35
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: add helper to check if dev was configuredMike Christie1-2/+6
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix race during implicit transition work flushesMike Christie1-9/+1
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow userspace to set state to transitioningMike Christie1-15/+22
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix ALUA transition timeout handlingMike Christie2-16/+9
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Use system workqueue for ALUA transitionsMike Christie1-5/+3
If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fail ALUA transitions for pscsiMike Christie1-0/+3
We do not setup the LU group for pscsi devices, so if you write a state to alua_access_state that will cause a transition you will get a NULL pointer dereference. This patch will fail attempts to try and transition the path for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA flag. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow ALUA setup for some passthrough backendsMike Christie4-7/+15
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: return on first Opt parse failureMike Christie1-0/+3
We only were returing failure if the last opt to be parsed failed. This has a return failure when we first detect a failure. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: allow hw_max_sectors greater than 128Mike Christie1-19/+35
tcmu hard codes the hw_max_sectors to 128 which is a litle small. Userspace uses the max_sectors to report the optimal IO size and some initiators perform better with larger IOs (open-iscsi seems to do better with 256 to 512 depending on the test). (Fix do not display hw max sectors twice - MNC) Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Drop pointless tfo->check_stop_free checkNicholas Bellinger2-2/+5
All in-tree fabric drivers provide a tfo->check_stop_free(), so there is no need to do the extra check within existing transport_cmd_check_stop_to_fabric() code. Just to be sure, add a check in target_fabric_tf_ops_check() to notify any out-of-tree drivers that might be missing it. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18parisc: Fix system shutdown haltHelge Deller1-0/+2
On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.9+
2017-03-18parisc: perf: Fix potential NULL pointer dereferenceArvind Yadav1-45/+49
Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-17drm: vc4: remove redundant check of plane being non-nullColin Ian King1-9/+2
The pointer plane is always null on the error path at label 'fail' hence the check if it is non-null is redundant. We can therefore remove the check and the destruction of plane as well as the fail error path and instead just return an -ENOMEM ERR_PTR. Detected by CoverityScan, CID#1339532 ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com
2017-03-17drm/vc4: use platform_register_driversPhilipp Zabel1-14/+8
Use platform_register_drivers instead of open coding the iteration over component platform drivers in the vc4_drv module. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170317170059.17821-1-p.zabel@pengutronix.de
2017-03-17drm/i915: Initialise i915_gem_object_create_from_data() directlyChris Wilson1-16/+29
Use pagecache_write to avoid shmemfs clearing the pages prior to us immediately overwriting them with our data. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2017-03-17drm/i915: Correct error handling for i915_gem_object_create_from_data()Chris Wilson1-2/+2
i915_gem_object_create_from_data() always returns an error pointer on failure, there is no need to check against NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317205317.7885-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2017-03-17drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutexChris Wilson2-5/+1
Both object creation and backing storage page allocation do not require struct_mutex, so do not require the caller to take it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2017-03-17pNFS/flexfiles: never nfs4_mark_deviceid_unavailableWeston Andros Adamson4-10/+31
The flexfiles layout should never mark a device unavailable. Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call directly from files layout where it's still needed. The flexfiles driver still handles marked devices in error paths, but will now print a rate limited warning. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17pNFS: return status from nfs4_pnfs_ds_connectWeston Andros Adamson6-6/+48
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it can wait on another context to reach the same failure. This checks that the rpc_create succeeded and returns the error to the caller. When an error is returned, both the files and flexfiles layouts will return NULL from _prepare_ds(). The flexfiles layout will also return the layout with the error NFS4ERR_NXIO. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.