aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-04bpf, s390: fix jit branch offset related to ldimm64Daniel Borkmann1-1/+2
While testing some other work that required JIT modifications, I run into test_bpf causing a hang when JIT enabled on s390. The problematic test case was the one from ddc665a4bb4b (bpf, arm64: fix jit branch offset related to ldimm64), and turns out that we do have a similar issue on s390 as well. In bpf_jit_prog() we update next instruction address after returning from bpf_jit_insn() with an insn_count. bpf_jit_insn() returns either -1 in case of error (e.g. unsupported insn), 1 or 2. The latter is only the case for ldimm64 due to spanning 2 insns, however, next address is only set to i + 1 not taking actual insn_count into account, thus fix is to use insn_count instead of 1. bpf_jit_enable in mode 2 provides also disasm on s390: Before fix: 000003ff800349b6: a7f40003 brc 15,3ff800349bc ; target 000003ff800349ba: 0000 unknown 000003ff800349bc: e3b0f0700024 stg %r11,112(%r15) 000003ff800349c2: e3e0f0880024 stg %r14,136(%r15) 000003ff800349c8: 0db0 basr %r11,%r0 000003ff800349ca: c0ef00000000 llilf %r14,0 000003ff800349d0: e320b0360004 lg %r2,54(%r11) 000003ff800349d6: e330b03e0004 lg %r3,62(%r11) 000003ff800349dc: ec23ffeda065 clgrj %r2,%r3,10,3ff800349b6 ; jmp 000003ff800349e2: e3e0b0460004 lg %r14,70(%r11) 000003ff800349e8: e3e0b04e0004 lg %r14,78(%r11) 000003ff800349ee: b904002e lgr %r2,%r14 000003ff800349f2: e3b0f0700004 lg %r11,112(%r15) 000003ff800349f8: e3e0f0880004 lg %r14,136(%r15) 000003ff800349fe: 07fe bcr 15,%r14 After fix: 000003ff80ef3db4: a7f40003 brc 15,3ff80ef3dba 000003ff80ef3db8: 0000 unknown 000003ff80ef3dba: e3b0f0700024 stg %r11,112(%r15) 000003ff80ef3dc0: e3e0f0880024 stg %r14,136(%r15) 000003ff80ef3dc6: 0db0 basr %r11,%r0 000003ff80ef3dc8: c0ef00000000 llilf %r14,0 000003ff80ef3dce: e320b0360004 lg %r2,54(%r11) 000003ff80ef3dd4: e330b03e0004 lg %r3,62(%r11) 000003ff80ef3dda: ec230006a065 clgrj %r2,%r3,10,3ff80ef3de6 ; jmp 000003ff80ef3de0: e3e0b0460004 lg %r14,70(%r11) 000003ff80ef3de6: e3e0b04e0004 lg %r14,78(%r11) ; target 000003ff80ef3dec: b904002e lgr %r2,%r14 000003ff80ef3df0: e3b0f0700004 lg %r11,112(%r15) 000003ff80ef3df6: e3e0f0880004 lg %r14,136(%r15) 000003ff80ef3dfc: 07fe bcr 15,%r14 test_bpf.ko suite runs fine after the fix. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04mlxsw: spectrum_switchdev: Release multicast groups during finiIdo Schimmel1-1/+12
Each multicast group (MID) stores a bitmap of ports to which a packet should be forwarded to in case an MDB entry associated with the MID is hit. Since the initial introduction of IGMP snooping in commit 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") the driver didn't correctly free these multicast groups upon ungraceful situations such as the removal of the upper bridge device or module removal. The correct way to fix this is to associate each MID with the bridge ports member in it and then drop the reference in case the bridge port is destroyed, but this will result in a lot more code and will be fixed in net-next. For now, upon module removal, traverse the MID list and release each one. Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04mlxsw: spectrum_switchdev: Don't warn about valid situationsIdo Schimmel1-12/+12
Some operations in the bridge driver such as MDB deletion are preformed in an atomic context and thus deferred to a process context by the switchdev infrastructure. Therefore, by the time the operation is performed by the underlying device driver it's possible the bridge port context is already gone. This is especially true for removal flows, but theoretically can also be invoked during addition. Remove the warnings in such situations and return normally. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Fixes: 3922285d96e7 ("net: bridge: Add support for offloading port attributes") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: fix xmit timer to only be reset if data ACKed/SACKedNeal Cardwell2-18/+16
Fix a TCP loss recovery performance bug raised recently on the netdev list, in two threads: (i) July 26, 2017: netdev thread "TCP fast retransmit issues" (ii) July 26, 2017: netdev thread: "[PATCH V2 net-next] TLP: Don't reschedule PTO when there's one outstanding TLP retransmission" The basic problem is that incoming TCP packets that did not indicate forward progress could cause the xmit timer (TLP or RTO) to be rearmed and pushed back in time. In certain corner cases this could result in the following problems noted in these threads: - Repeated ACKs coming in with bogus SACKs corrupted by middleboxes could cause TCP to repeatedly schedule TLPs forever. We kept sending TLPs after every ~200ms, which elicited bogus SACKs, which caused more TLPs, ad infinitum; we never fired an RTO to fill in the holes. - Incoming data segments could, in some cases, cause us to reschedule our RTO or TLP timer further out in time, for no good reason. This could cause repeated inbound data to result in stalls in outbound data, in the presence of packet loss. This commit fixes these bugs by changing the TLP and RTO ACK processing to: (a) Only reschedule the xmit timer once per ACK. (b) Only reschedule the xmit timer if tcp_clean_rtx_queue() deems the ACK indicates sufficient forward progress (a packet was cumulatively ACKed, or we got a SACK for a packet that was sent before the most recent retransmit of the write queue head). This brings us back into closer compliance with the RFCs, since, as the comment for tcp_rearm_rto() notes, we should only restart the RTO timer after forward progress on the connection. Previously we were restarting the xmit timer even in these cases where there was no forward progress. As a side benefit, this commit simplifies and speeds up the TCP timer arming logic. We had been calling inet_csk_reset_xmit_timer() three times on normal ACKs that cumulatively acknowledged some data: 1) Once near the top of tcp_ack() to switch from TLP timer to RTO: if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) tcp_rearm_rto(sk); 2) Once in tcp_clean_rtx_queue(), to update the RTO: if (flag & FLAG_ACKED) { tcp_rearm_rto(sk); 3) Once in tcp_ack() after tcp_fastretrans_alert() to switch from RTO to TLP: if (icsk->icsk_pending == ICSK_TIME_RETRANS) tcp_schedule_loss_probe(sk); This commit, by only rescheduling the xmit timer once per ACK, simplifies the code and reduces CPU overhead. This commit was tested in an A/B test with Google web server traffic. SNMP stats and request latency metrics were within noise levels, substantiating that for normal web traffic patterns this is a rare issue. This commit was also tested with packetdrill tests to verify that it fixes the timer behavior in the corner cases discussed in the netdev threads mentioned above. This patch is a bug fix patch intended to be queued for -stable relases. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Reported-by: Klavs Klavsen <kl@vsen.dk> Reported-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: enable xmit timer fix by having TLP use time when RTO should fireNeal Cardwell1-9/+5
Have tcp_schedule_loss_probe() base the TLP scheduling decision based on when the RTO *should* fire. This is to enable the upcoming xmit timer fix in this series, where tcp_schedule_loss_probe() cannot assume that the last timer installed was an RTO timer (because we are no longer doing the "rearm RTO, rearm RTO, rearm TLP" dance on every ACK). So tcp_schedule_loss_probe() must independently figure out when an RTO would want to fire. In the new TLP implementation following in this series, we cannot assume that icsk_timeout was set based on an RTO; after processing a cumulative ACK the icsk_timeout we see can be from a previous TLP or RTO. So we need to independently recalculate the RTO time (instead of reading it out of icsk_timeout). Removing this dependency on the nature of icsk_timeout makes things a little easier to reason about anyway. Note that the old and new code should be equivalent, since they are both saying: "if the RTO is in the future, but at an earlier time than the normal TLP time, then set the TLP timer to fire when the RTO would have fired". Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03tcp: introduce tcp_rto_delta_us() helper for xmit timer fixNeal Cardwell2-4/+11
Pure refactor. This helper will be required in the xmit timer fix later in the patch series. (Because the TLP logic will want to make this calculation.) Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03ipv6: set rt6i_protocol properly in the route when it is installedXin Long1-8/+3
After commit c2ed1880fd61 ("net: ipv6: check route protocol when deleting routes"), ipv6 route checks rt protocol when trying to remove a rt entry. It introduced a side effect causing 'ip -6 route flush cache' not to work well. When flushing caches with iproute, all route caches get dumped from kernel then removed one by one by sending DELROUTE requests to kernel for each cache. The thing is iproute sends the request with the cache whose proto is set with RTPROT_REDIRECT by rt6_fill_node() when kernel dumps it. But in kernel the rt_cache protocol is still 0, which causes the cache not to be matched and removed. So the real reason is rt6i_protocol in the route is not set when it is allocated. As David Ahern's suggestion, this patch is to set rt6i_protocol properly in the route when it is installed and remove the codes setting rtm_protocol according to rt6i_flags in rt6_fill_node. This is also an improvement to keep rt6i_protocol consistent with rtm_protocol. Fixes: c2ed1880fd61 ("net: ipv6: check route protocol when deleting routes") Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03net: fix keepalive code vs TCP_FASTOPEN_CONNECTEric Dumazet1-1/+2
syzkaller was able to trigger a divide by 0 in TCP stack [1] Issue here is that keepalive timer needs to be updated to not attempt to send a probe if the connection setup was deferred using TCP_FASTOPEN_CONNECT socket option added in linux-4.11 [1] divide error: 0000 [#1] SMP CPU: 18 PID: 0 Comm: swapper/18 Not tainted task: ffff986f62f4b040 ti: ffff986f62fa2000 task.ti: ffff986f62fa2000 RIP: 0010:[<ffffffff8409cc0d>] [<ffffffff8409cc0d>] __tcp_select_window+0x8d/0x160 Call Trace: <IRQ> [<ffffffff8409d951>] tcp_transmit_skb+0x11/0x20 [<ffffffff8409da21>] tcp_xmit_probe_skb+0xc1/0xe0 [<ffffffff840a0ee8>] tcp_write_wakeup+0x68/0x160 [<ffffffff840a151b>] tcp_keepalive_timer+0x17b/0x230 [<ffffffff83b3f799>] call_timer_fn+0x39/0xf0 [<ffffffff83b40797>] run_timer_softirq+0x1d7/0x280 [<ffffffff83a04ddb>] __do_softirq+0xcb/0x257 [<ffffffff83ae03ac>] irq_exit+0x9c/0xb0 [<ffffffff83a04c1a>] smp_apic_timer_interrupt+0x6a/0x80 [<ffffffff83a03eaf>] apic_timer_interrupt+0x7f/0x90 <EOI> [<ffffffff83fed2ea>] ? cpuidle_enter_state+0x13a/0x3b0 [<ffffffff83fed2cd>] ? cpuidle_enter_state+0x11d/0x3b0 Tested: Following packetdrill no longer crashes the kernel `echo 0 >/proc/sys/net/ipv4/tcp_timestamps` // Cache warmup: send a Fast Open cookie request 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation is now in progress) +0 > S 0:0(0) <mss 1460,nop,nop,sackOK,nop,wscale 8,FO,nop,nop> +.01 < S. 123:123(0) ack 1 win 14600 <mss 1460,nop,nop,sackOK,nop,wscale 6,FO abcd1234,nop,nop> +0 > . 1:1(0) ack 1 +0 close(3) = 0 +0 > F. 1:1(0) ack 1 +0 < F. 1:1(0) ack 2 win 92 +0 > . 2:2(0) ack 2 +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 +.01 connect(4, ..., ...) = 0 +0 setsockopt(4, SOL_TCP, TCP_KEEPIDLE, [5], 4) = 0 +10 close(4) = 0 `echo 1 >/proc/sys/net/ipv4/tcp_timestamps` Fixes: 19f6d3f3c842 ("net/tcp-fastopen: Add new API support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02tcp: avoid setting cwnd to invalid ssthresh after cwnd reduction statesYuchung Cheng1-2/+2
If the sender switches the congestion control during ECN-triggered cwnd-reduction state (CA_CWR), upon exiting recovery cwnd is set to the ssthresh value calculated by the previous congestion control. If the previous congestion control is BBR that always keep ssthresh to TCP_INIFINITE_SSTHRESH, cwnd ends up being infinite. The safe step is to avoid assigning invalid ssthresh value when recovery ends. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02ibmvnic: Initialize SCRQ's during login renegotiationThomas Falcon1-1/+14
SCRQ resources are freed during renegotiation, but they are not re-allocated afterwards due to some changes in the initialization process. Fix that by re-allocating the memory after renegotation. SCRQ's can also be freed if a server capabilities request fails. If this were encountered during a device reset for example, SCRQ's may not be re-allocated. This operation is not necessary anymore so remove it. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02usb: qmi_wwan: add D-Link DWM-222 device IDHector Martin1-0/+1
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fixes missing capability bit in flags2 capability dumpJack Morgenstein1-0/+1
The cited commit introduced the following new enum value in file include/linux/mlx4/device.h: QUERY_DEV_CAP_DIAG_RPRT_PER_PORT However, it failed to introduce a corresponding entry in function dump_dev_cap_flags2() for outputting a line in the message log when this capability bit is set. The change here fixes that omission. Fixes: c7c122ed67e4 ("net/mlx4: Add diagnostic counters capability bit") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fix namespace misalignment in QinQ VST support commitJack Morgenstein1-1/+1
The cited commit introduced the following new enum value in file include/linux/mlx4/device.h: MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP However the value of MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP needs to stay consistent with the value used in another namespace in function dump_dev_cap_flags2(), which is manually kept in sync. The change here restores that consistency. Fixes: 7c3d21c8153c ("net/mlx4_core: Preparation for VF vlan protocol 802.1ad") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_core: Fix sl_to_vl_change bit offset in flags2 dumpJack Morgenstein1-1/+1
The index value in function dump_dev_cap_flags2() for outputting "sl to vl mapping table change event support" needs to be consistent with the value of the enumerated constant MLX4_DEV_CAP_FLAG2_SL_TO_VL_CHANGE_EVENT defined in file include/linux/mlx4_device.h The change here restores that consistency. Fixes: fd10ed8e6f42 ("IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets") Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) supportInbar Karmy5-7/+16
Currently when WoL is supported but disabled, ethtool reports: "Supports Wake-on: d". Fix the indication of Wol support, so that the indication remains "g" all the time if the NIC supports WoL. Tested: As accepted, when NIC supports WoL- ethtool reports: Supports Wake-on: g Wake-on: d when NIC doesn't support WoL- ethtool reports: Supports Wake-on: d Wake-on: d Fixes: 14c07b1358ed ("mlx4: Wake on LAN support") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: Fix to handle hard_header_len updateNisar Sayed1-3/+3
Fix to handle hard_header_len update When ifconfig up/down sequence is initiated hard_header_len get updated incrementally for each ifconfig up /down sequence, this leads invalid hard_header_len, moving to lan78xx_bind to have one time update of hard_header_len addresses the issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: USB fast connect/disconnect crash fixNisar Sayed1-6/+6
USB fast connect/disconnect crash fix When USB plugged/unplugged at fast rate, lan78xx_mdio_init() in lan78xx_bind() failing case is not handled. Whenever lan78xx_mdio_init() failed, dev->mdiobus will be freed, however since lan78xx_bind() not consider as error and try to proceed for further initialization in lan78xx_probe() which leads system hung/crash. Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind(). Hence halting the failed cases right manner fixes the system crash/hung issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ipvlan: Fix 64-bit statistics seqcount initializationFlorian Fainelli1-1/+1
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that by using the proper helper function: netdev_alloc_pcpu_stats(). Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01netvsc: Initialize 64-bit stats seqcountFlorian Fainelli1-0/+2
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. In commit 6c80f3fc2398 ("netvsc: report per-channel stats in ethtool statistics") netdev_alloc_pcpu_stats() was removed in favor of open-coding the 64-bits statistics, except that u64_stats_init() was missed. Fixes: 6c80f3fc2398 ("netvsc: report per-channel stats in ethtool statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01gtp: Initialize 64-bit per-cpu stats correctlyFlorian Fainelli1-1/+1
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that by using netdev_alloc_pcpu_stats() instead of an open coded allocation. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01nfp: Initialize RX and TX ring 64-bit stats seqcountsFlorian Fainelli1-0/+2
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ixgbe: Initialize 64-bit stats seqcountsFlorian Fainelli1-0/+4
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4197aa7bb818 ("ixgbevf: provide 64 bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01i40e: Initialize 64-bit statistics TX ring seqcountFlorian Fainelli1-0/+2
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 980e9b118642 ("i40e: Add support for 64 bit netstats") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01b44: Initialize 64-bit stats seqcountFlorian Fainelli1-0/+1
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: eeda8585522b ("b44: add 64 bit stats") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01gue: fix remcsum when GRO on and CHECKSUM_PARTIAL boundary is outer UDPK. Den1-0/+1
In the case that GRO is turned on and the original received packet is CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last csum-unnecessary point, which for instance could occur if the packet comes from another Linux guest on the same Linux host, we have to do either remcsum_adjust or set up CHECKSUM_PARTIAL again with its csum_start properly reset considering RCO. However, since b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") that barrier in such case could be skipped if GRO turned on, hence we pass over it and the inner L4 validation mistakenly reckons it as a bad csum. This patch makes remcsum_offload being reset at the same time of GRO remcsum cleanup, so as to make it work in such case as before. Fixes: b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01vxlan: fix remcsum when GRO on and CHECKSUM_PARTIAL boundary is outer UDPK. Den1-0/+1
In the case that GRO is turned on and the original received packet is CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last csum-unnecessary point, which for instance could occur if the packet comes from another Linux guest on the same Linux host, we have to do either remcsum_adjust or set up CHECKSUM_PARTIAL again with its csum_start properly reset considering RCO. However, since b7fe10e5ebac("gro: Fix remcsum offload to deal with frags in GRO") that barrier in such case could be skipped if GRO turned on, hence we pass over it and the inner L4 validation mistakenly reckons it as a bad csum. This patch makes remcsum_offload being reset at the same time of GRO remcsum cleanup, so as to make it work in such case as before. Fixes: b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Cipso: cipso_v4_optptr enter infinite loopyujuan.qi1-2/+10
in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop. Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue Signed-off-by: yujuan.qi <yujuan.qi@mediatek.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix fifo read in cpts_find_tsGrygorii Strashko1-1/+1
Now the call chain cpts_find_ts() |- cpts_fifo_read(cpts, CPTS_EV_PUSH) will stop reading CPTS FIFO if PUSH event is found. But this is not expected and CPTS FIFI should be completely drained here. This is most probably copy-paste error and it has no negative impact as CPTS_EV_PUSH should not be present in FIFO without TS_PUSH request and cpts_systim_read() and cpts_find_ts() synchronized by spin_lock. Correct above by calling cpts_fifo_read() with -1 parameter, so it will read all CPTS event from FIFO. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: fix tx timestamping timeoutGrygorii Strashko2-2/+83
With the low speed Ethernet connection CPDMA notification about packet processing can be received before CPTS TX timestamp event, which is set when packet actually left CPSW while cpdma notification is sent when packet pushed in CPSW fifo. As result, when connection is slow and CPU is fast enough TX timestamping is not working properly. Fix it, by introducing TX SKB queue to store PTP SKBs for which Ethernet Transmit Event hasn't been received yet and then re-check this queue with new Ethernet Transmit Events by scheduling CPTS overflow work more often (every 1 jiffies) until TX SKB queue is not empty. Side effect of this change is: - User space tools require to take into account possible delay in TX timestamp processing (for example ptp4l works with tx_timestamp_timeout=400 under net traffic and tx_timestamp_timeout=25 in idle). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01net: ethernet: ti: cpts: convert to use ptp auxiliary workerGrygorii Strashko2-15/+13
There could be significant delay in CPTS work schedule under high system load and on -RT which could cause CPTS misbehavior due to internal counter overflow. Usage of own kthread_worker allows to avoid such kind of issues and makes it possible to tune priority of CPTS kthread_worker thread on -RT (thread name "cpts"). Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC subsystem implements such functionality in a generic way now. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ptp: introduce ptp auxiliary workerGrygorii Strashko3-0/+65
Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31samples/bpf: fix bpf tunnel cleanupWilliam Tu2-2/+3
test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the next geneve tunnelling test case fails. In addition, the geneve reserved bit in tcbpf2_kern.c should be zero, according to the RFC. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31udp6: fix jumbogram receptionPaolo Abeni3-1/+17
Since commit 67a51780aebb ("ipv6: udp: leverage scratch area helpers") udp6_recvmsg() read the skb len from the scratch area, to avoid a cache miss. But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their length exceeds the 16 bits available in the scratch area. As a side effect the length returned by recvmsg() is: <ingress datagram len> % (1<<16) This commit addresses the issue allocating one more bit in the IP6CB flags field and setting it for incoming jumbograms. Such field is still in the first cacheline, so at recvmsg() time we can check it and fallback to access skb->len if required, without a measurable overhead. Fixes: 67a51780aebb ("ipv6: udp: leverage scratch area helpers") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31ppp: Fix a scheduling-while-atomic bug in del_chanGao Feng1-1/+1
The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would trigger this bug when __sk_free is invoked in atomic context, because of the call path pptp_sock_destruct->del_chan->synchronize_rcu. Now move the synchronize_rcu to pptp_release from del_chan. This is the only one case which would free the sock and need the synchronize_rcu. The following is the panic I met with kernel 3.3.8, but this issue should exist in current kernel too according to the codes. BUG: scheduling while atomic __schedule_bug+0x5e/0x64 __schedule+0x55/0x580 ? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic] ? dev_hard_start_xmit+0x423/0x530 ? sch_direct_xmit+0x73/0x170 __cond_resched+0x16/0x30 _cond_resched+0x22/0x30 wait_for_common+0x18/0x110 ? call_rcu_bh+0x10/0x10 wait_for_completion+0x12/0x20 wait_rcu_gp+0x34/0x40 ? wait_rcu_gp+0x40/0x40 synchronize_sched+0x1e/0x20 0xf8417298 0xf8417484 ? sock_queue_rcv_skb+0x109/0x130 __sk_free+0x16/0x110 ? udp_queue_rcv_skb+0x1f2/0x290 sk_free+0x16/0x20 __udp4_lib_rcv+0x3b8/0x650 Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"Florian Fainelli3-5/+6
This reverts commit 28b45910ccda ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") because in the process of moving from dev_info() to dev_info_once() we essentially lost the helpful printed messages once the second instance of the driver is loaded. dev_info_once() does not actually print the message once per device instance, but once period. Fixes: 28b45910ccda ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31virtio_net: fix truesize for mergeable buffersMichael S. Tsirkin1-3/+2
Seth Forshee noticed a performance degradation with some workloads. This turns out to be due to packet drops. Euan Kemp noticed that this is because we drop all packets where length exceeds the truesize, but for some packets we add in extra memory without updating the truesize. This in turn was kept around unchanged from ab7db91705e95 ("virtio-net: auto-tune mergeable rx buffer size for improved performance"). That commit had an internal reason not to account for the extra space: not enough bits to do it. No longer true so let's account for the allocated length exactly. Many thanks to Seth Forshee for the report and bisecting and Euan Kemp for debugging the issue. Fixes: 680557cf79f8 ("virtio_net: rework mergeable buffer handling") Reported-by: Euan Kemp <euan.kemp@coreos.com> Tested-by: Euan Kemp <euan.kemp@coreos.com> Reported-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31mv643xx_eth: fix of_irq_to_resource() error checkSergei Shtylyov1-1/+1
of_irq_to_resource() has recently been fixed to return negative error #'s along with 0 in case of failure, however the Marvell MV643xx Ethernet driver still only regards 0 as invalid IRQ -- fix it up. Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31MAINTAINERS: Add more files to the PHY LIBRARY sectionFlorian Fainelli1-3/+11
Include missing files that are provided by, used, or directly maintained within the PHY LIBRARY, this include uapi header, header files used by Device Tree code etc. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()Ido Schimmel1-1/+1
Michał reported a NULL pointer deref during fib_sync_down_dev() when unregistering a netdevice. The problem is that we don't check for 'in_dev' being NULL, which can happen in very specific cases. Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or the inetaddr notification chains. However, if an interface isn't configured with any IP address, then it's possible for host routes to be flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in inetdev_destroy(). To reproduce: $ ip link add type dummy $ ip route add local 1.1.1.0/24 dev dummy0 $ ip link del dev dummy0 Fix this by checking for the presence of 'in_dev' before referencing it. Fixes: 982acb97560c ("ipv4: fib: Notify about nexthop status changes") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: phy: Correctly process PHY_HALTED in phy_stop_machine()Florian Fainelli1-0/+3
Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f379cf ("phylib: convert state_queue work to delayed_work") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31sunhme: fix up GREG_STAT and GREG_IMASK register offsetsMark Cave-Ayland1-3/+3
Update the values to match those from the STP2002QFP documentation. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31libata: fix a couple of doc build warningsJonathan Corbet1-2/+2
The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c had fallen behind the current implementation, resulting in these doc build warnings: ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link' ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done' ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc' ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense' Update the comments and make the warnings go away. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-31batman-adv: fix TT sync flag inconsistenciesLinus Lüssing2-9/+53
This patch fixes an issue in the translation table code potentially leading to a TT Request + Response storm. The issue may occur for nodes involving BLA and an inconsistent configuration of the batman-adv AP isolation feature. However, since the new multicast optimizations, a single, malformed packet may lead to a mesh-wide, persistent Denial-of-Service, too. The issue occurs because nodes are currently OR-ing the TT sync flags of all originators announcing a specific MAC address via the translation table. When an intermediate node now receives a TT Request and wants to answer this on behalf of the destination node, then this intermediate node now responds with an altered flag field and broken CRC. The next OGM of the real destination will lead to a CRC mismatch and triggering a TT Request and Response again. Furthermore, the OR-ing is currently never undone as long as at least one originator announcing the according MAC address remains, leading to the potential persistency of this issue. This patch fixes this issue by storing the flags used in the CRC calculation on a a per TT orig entry basis to be able to respond with the correct, original flags in an intermediate TT Response for one thing. And to be able to correctly unset sync flags once all nodes announcing a sync flag vanish for another. Fixes: e9c00136a475 ("batman-adv: fix tt_global_entries flags update") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Antonio Quartulli <a@unstable.cc> [sw: typo in commit message] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-07-30Linux 4.13-rc3Linus Torvalds1-1/+1
2017-07-29bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_lenDaniel Borkmann1-1/+1
bpf_prog_size(prog->len) is not the correct length we want to dump back to user space. The code in bpf_prog_get_info_by_fd() uses this to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also includes the size of struct bpf_prog itself plus program instructions and is usually used either in context of accounting or for bpf_prog_alloc() et al, thus we copy out of bounds in bpf_prog_get_info_by_fd() potentially. Use the correct bpf_prog_insn_size() instead. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29tcp: avoid bogus gcc-7 array-bounds warningArnd Bergmann1-2/+3
When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a false-positive warning: net/ipv4/tcp_output.c: In function 'tcp_connect': net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ^~ net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ I have opened a gcc bug for this, but distros have already shipped compilers with this problem, and it's not clear yet whether there is a way for gcc to avoid the warning. As the problem is related to the bitfield access, this introduces a temporary variable to store the old enum value. I did not notice this warning earlier, since UBSAN is disabled when building with COMPILE_TEST, and that was always turned on in both allmodconfig and randconfig tests. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"Colin Ian King1-1/+1
Trivial fix to spelling mistake in printk message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29bpf: don't indicate success when copy_from_user failsDaniel Borkmann1-1/+1
err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so user space can be notified of buggy behavior. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29udp6: fix socket leak on early demuxPaolo Abeni3-10/+21
When an early demuxed packet reaches __udp6_lib_lookup_skb(), the sk reference is retrieved and used, but the relevant reference count is leaked and the socket destructor is never called. Beyond leaking the sk memory, if there are pending UDP packets in the receive queue, even the related accounted memory is leaked. In the long run, this will cause persistent forward allocation errors and no UDP skbs (both ipv4 and ipv6) will be able to reach the user-space. Fix this by explicitly accessing the early demux reference before the lookup, and properly decreasing the socket reference count after usage. Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and the now obsoleted comment about "socket cache". The newly added code is derived from the current ipv4 code for the similar path. v1 -> v2: fixed the __udp6_lib_rcv() return code for resubmission, as suggested by Eric Reported-by: Sam Edwards <CFSworks@gmail.com> Reported-by: Marc Haber <mh+netdev@zugschlus.de> Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net: thunderx: Fix BGX transmit stall due to underflowSunil Goutham2-5/+24
For SGMII/RGMII/QSGMII interfaces when physical link goes down while traffic is high is resulting in underflow condition being set on that specific BGX's LMAC. Which assets a backpresure and VNIC stops transmitting packets. This is due to BGX being disabled in link status change callback while packet is in transit. This patch fixes this issue by not disabling BGX but instead just disables packet Rx and Tx. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.