aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCIMaxime Ripard1-6/+0
Neither the OHCI or EHCI bindings are using the phy-names property, so we can just drop it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-15ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero boardAndreas Kemnade1-0/+15
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with Broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-26ARM: dts: sun8i: h3: Add default dr_modeMaxime Ripard1-0/+1
The USB OTG binding we have mandates to have a dr_mode property, yet not all boards are setting it. Since the generic otg binding states that the default mode should be the OTG mode, let's use that one in our DTSI. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-25ARM: dts: sun8i: h3: Refactor the pinctrl node namesMaxime Ripard24-52/+52
The H3 and H5 have never been converted to the new convention we want to have for the pinctrl nodes. Convert them. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-25ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entryMaxime Ripard8-14/+0
Some nodes still have pinctrl-names entry, yet they don't have any pinctrl group anymore. Drop them. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-21ARM: dts: sunxi: h3/h5: Add device node for SIDChen-Yu Tsai3-0/+13
The device tree binding already lists compatible strings for these two SoCs. Add a device node for them. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-03-18ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK boardPaul Kocialkowski2-0/+115
This is an H3-based board that sticks close to the reference design. Supported features: * UART * DRAM * MMC * eMMC * Ethernet * USB host * USB peripheral * HDMI Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-17Linux 5.1-rc1Linus Torvalds1-2/+2
2019-03-17perf/x86/intel: Make dev_attr_allow_tsx_force_abort statickbuild test robot1-1/+1
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
2019-03-17kconfig: remove stale lxdialog/.gitignoreMasahiro Yamada1-4/+0
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada29-47/+18
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada12-13/+6
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17Revert "modsign: Abort modules_install when signing fails"Douglas Anderson1-1/+1
This reverts commit caf6fe91ddf62a96401e21e9b7a07227440f4185. The commit was fine but is no longer needed as of commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: Make NOSTDINC_FLAGS a simply expanded variableDouglas Anderson1-1/+1
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb02ce0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: deb-pkg: avoid implicit effectsArseny Maslennikov1-1/+4
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>