aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-10USB: quirks: blacklist duplicate ep on Sound Devices USBPre2Johan Hovold1-0/+5
This device has a broken vendor-specific altsetting for interface 1, where endpoint 0x85 is declared as an isochronous endpoint despite being used by interface 2 for audio capture. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0926 idProduct 0x0202 bcdDevice 1.00 iManufacturer 1 Sound Devices iProduct 2 USBPre2 iSerial 3 [...] bNumConfigurations 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 24000 tSamFreq[ 3] 32000 tSamFreq[ 4] 44100 tSamFreq[ 5] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing, but in this case we need to ignore the first instance in order to avoid breaking the audio capture interface. Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Cc: stable <stable@vger.kernel.org> Reported-by: edes <edes@gmx.net> Tested-by: edes <edes@gmx.net> Link: https://lore.kernel.org/r/20200201105829.5682c887@acme7.acmenet Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200203153830.26394-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10USB: core: add endpoint-blacklist quirkJohan Hovold4-0/+49
Add a new device quirk that can be used to blacklist endpoints. Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing. In order to handle devices where the first interfaces with duplicate endpoints are the ones that should have their endpoints ignored, we need to add a blacklist. Tested-by: edes <edes@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10usb: dwc3: debug: fix string position formatting mixup with ret and lenColin Ian King1-24/+15
Currently the string formatting is mixing up the offset of ret and len. Re-work the code to use just len, remove ret and use scnprintf instead of snprintf and len position accumulation where required. Remove the -ve return check since scnprintf never returns a failure -ve size. Also break overly long lines to clean up checkpatch warnings. Addresses-Coverity: ("Unused value") Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210095139.328711-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10usb: phy: tegra: Add clarifying comments about the shared registersDmitry Osipenko1-0/+8
Tools like Coccinelle may erroneously recommend to use the devm_platform_ioremap_resource() API for the registers mapping because these tools are not aware about the implementation details of the driver. Let's add a clarifying comments to the code, which should help to stop future attempts to break the driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200202224259.29187-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10USB: hub: Don't record a connect-change event during reset-resumeAlan Stern1-5/+0
Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else. Such a request was added by commit a4f55d8b8c14 ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports). The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed. Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably. The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened. One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does. (Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.) Reported-and-tested-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann <heinzelmann.david@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10usb: charger: assign specific number for enum valuePeter Chen1-8/+8
To work properly on every architectures and compilers, the enum value needs to be specific numbers. Suggested-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10usb: uas: fix a plug & unplug racingEJ Hsu1-1/+22
When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by: EJ Hsu <ejh@nvidia.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10MAINTAINERS: Sort entries in database for USB TYPECAndy Shevchenko1-9/+9
Run parse-maintainers.pl and choose USB TYPEC records. Fix them accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200128142956.39604-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10USB: hub: Fix the broken detection of USB3 device in SMSC hubHardik Gajjar2-0/+16
Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able to detect the USB3.0 mass storage devices or is detecting those as USB2.0 high speed devices. The explanation given by Renesas is that, due to a HW issue, the XHCI driver does not wake up after going to sleep on connecting a USB3.0 device. In order to mitigate that, disable the auto-suspend feature specifically for SMSC hubs from hub_probe() function, as a quirk. Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, configurable hub controller. [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.077303] usb 5-1.1: Product: Ultra [ 74.080980] usb 5-1.1: Manufacturer: SanDisk [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550 [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.604430] usb 6-1.1: Product: Ultra [ 34.608110] usb 6-1.1: Manufacturer: SanDisk [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550 Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platformsMathias Nyman1-1/+3
Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: fix runtime pm enabling for quirky Intel hostsMathias Nyman1-3/+3
Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33b986 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: <stable@vger.kernel.org> # 4.13+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Fix memory leak when caching protocol extended capability PSI tablesMathias Nyman3-33/+64
xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.Mathias Nyman1-3/+9
A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-09Linux 5.6-rc1Linus Torvalds1-2/+2
2020-02-09irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARMMarc Zyngier1-2/+2
In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08fs: Add VirtualBox guest shared folder (vboxsf) supportHans de Goede12-0/+3280
VirtualBox hosts can share folders with guests, this commit adds a VFS driver implementing the Linux-guest side of this, allowing folders exported by the host to be mounted under Linux. This driver depends on the guest <-> host IPC functions exported by the vboxguest driver. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-08Fix up remaining devm_ioremap_nocache() in SGI IOC3 8250 UART driverLinus Torvalds1-1/+1
This is a merge error on my part - the driver was merged into mainline by commit c5951e7c8ee5 ("Merge tag 'mips_5.6' of git://../mips/linux") over a week ago, but nobody apparently noticed that it didn't actually build due to still having a reference to the devm_ioremap_nocache() function, removed a few days earlier through commit 6a1000bd2703 ("Merge tag 'ioremap-5.6' of git://../ioremap"). Apparently this didn't get any build testing anywhere. Not perhaps all that surprising: it's restricted to 64-bit MIPS only, and only with the new SGI_MFD_IOC3 support enabled. I only noticed because the ioremap conflicts in the ARM SoC driver update made me check there weren't any others hiding, and I found this one. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08pipe: use exclusive waits when reading or writingLinus Torvalds4-30/+51
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08compat_ioctl: fix FIONREAD on devicesArnd Bergmann1-4/+7
My final cleanup patch for sys_compat_ioctl() introduced a regression on the FIONREAD ioctl command, which is used for both regular and special files, but only works on regular files after my patch, as I had missed the warning that Al Viro put into a comment right above it. Change it back so it can work on any file again by moving the implementation to do_vfs_ioctl() instead. Fixes: 77b9040195de ("compat_ioctl: simplify the implementation") Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-02-08net: thunderx: use proper interface type for RGMIITim Harvey1-1/+1
The configuration of the OCTEONTX XCV_DLL_CTL register via xcv_init_hw() is such that the RGMII RX delay is bypassed leaving the RGMII TX delay enabled in the MAC: /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID and not PHY_INTERFACE_MODE_RGMII. Fixing this allows RGMII PHY drivers to do the right thing (enable RX delay in the PHY) instead of erroneously enabling both delays in the PHY. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACKChristophe Leroy1-1/+1
When CONFIG_PROVE_LOCKING is selected together with (now default) CONFIG_VMAP_STACK, kernel enter deadlock during boot. At the point of checking whether interrupts are enabled or not, the value of MSR saved on stack is read using the physical address of the stack. But at this point, when using VMAP stack the DATA MMU translation has already been re-enabled, leading to deadlock. Don't use the physical address of the stack when CONFIG_VMAP_STACK is set. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr
2020-02-08powerpc/futex: Fix incorrect user access blockingMichael Ellerman1-4/+6
The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739b07bd ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au
2020-02-08irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessorsZenghui Yu3-24/+24
V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
2020-02-08irqchip/gic-v3-its: Remove superfluous WARN_ONZenghui Yu1-1/+0
"ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()Zenghui Yu1-3/+1
The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD levelZenghui Yu1-0/+80
In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Set vpe_l1_base for all redistributorsZenghui Yu2-2/+5
Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com
2020-02-08irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZEZenghui Yu1-1/+1
The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com
2020-02-08mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_capLorenzo Bianconi1-1/+2
Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in mt7615_eeprom_parse_hw_cap routine Fixes: acf5457fd99db ("mt76: mt7615: read {tx,rx} mask from eeprom") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-07bpf: Improve bucket_log calculation logicMartin KaFai Lau1-2/+3
It was reported that the max_t, ilog2, and roundup_pow_of_two macros have exponential effects on the number of states in the sparse checker. This patch breaks them up by calculating the "nbuckets" first so that the "bucket_log" only needs to take ilog2(). In addition, Linus mentioned: Patch looks good, but I'd like to point out that it's not just sparse. You can see it with a simple make net/core/bpf_sk_storage.i grep 'smap->bucket_log = ' net/core/bpf_sk_storage.i | wc and see the end result: 1 365071 2686974 That's one line (the assignment line) that is 2,686,974 characters in length. Now, sparse does happen to react particularly badly to that (I didn't look to why, but I suspect it's just that evaluating all the types that don't actually ever end up getting used ends up being much more expensive than it should be), but I bet it's not good for gcc either. Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Link: https://lore.kernel.org/bpf/20200207081810.3918919-1-kafai@fb.com