aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-01-14mlxsw: spectrum_router: Configure default routing priorityYuval Mintz1-0/+24
When routing ip packets, the kernel is setting the SKB's priority based on the tos field of the packet. Imitate this behavior in the mlxsw router, having the internal switch priority of a routed packet determined according to its DS field. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: reg: add rdpm registerYuval Mintz2-1/+38
Add rdpm definition - router DSCP to priority mapping register. This register will be utilized later to align the default mapping between packet DSCP and switch-priority to the kernel's mapping between packet priority and skb priority. This is the first non-bit indexed register where the entries are arranged in descending order, i.e., entry at offset 0 matches configuration for dscp[63]. As a result, the item's step is converted into a signed variable to support descending arrays [where step would be negative]. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: dsa: mv88e6xxx: Decode VTU problem interruptAndrew Lunn4-2/+90
When there is a problem with the VTU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: dsa: mv88e6xxx: Decode ATU problem interruptAndrew Lunn4-2/+103
When there is a problem with the ATU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum_router: Add support for IPv6 non-equal-cost multipathIdo Schimmel1-5/+8
Since commit eb789980d0aa ("mlxsw: spectrum_router: Populate adjacency entries according to weights") the driver includes support for non-equal-cost multipath, but IPv4 nexthops were the only user. Now that the kernel supports weighted IPv6 nexthops, we can extend the driver to support it as well. This is done by assigning each nexthop its configured weight, so that it will be populated accordingly in the device's adjacency table. The `weight` parameter is also taken into account when comparing nexthop groups in order not to consolidate non-identical groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: netsec: use dma_addr_t for storing dma addressArnd Bergmann1-7/+7
On targets that have different sizes for phys_addr_t and dma_addr_t, we get a type mismatch error: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_alloc_dring': drivers/net/ethernet/socionext/netsec.c:970:9: error: passing argument 3 of 'dma_zalloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The code is otherwise correct, as the address is never actually used as a physical address but only passed into a DMA register. For consistently, I'm changing the variable name as well, to clarify that this is a DMA address. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: check for NULL function pointer in hns3_nic_set_featuresJian Shen1-2/+4
It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add feature check when feature changedJian Shen1-12/+15
Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add int_gl_idx setup for TX and RX queuesFuyun Liang3-0/+21
If the int_gl_idx does not be set, the default interrupt coalesce index is 0. The TX queues and the RX queues will both use the GL0 as the interrupt coalesce GL switch. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for TX queues and RX queues. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: change the unit of GL value macroFuyun Liang1-4/+4
Previously, driver used 2us as the GL unit. The time unit ethtool command "-c" and "-C" use is 1us, so now the GL unit driver uses actually is 1us. This patch changes the unit of GL value macro from 2us to 1us. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove unused GL setup functionFuyun Liang1-12/+0
Since the TX GL and the RX GL need to be set separately, hns3_set_vector_coalesc_gl() has been replaced with hns3_set_vector_coalesce_rx_gl() and hns3_set_vector_coalesce_tx_gl(). This patch removes hns3_set_vector_coalesc_gl(). Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor GL update functionFuyun Liang1-19/+16
The GL update function uses the max GL value between tx_int_gl and rx_int_gl to set both new tx_int_gl and new rx_int_gl. Therefore, User can not enable TX GL self-adaptive or RX GL self-adaptive individually. This patch refactors the code to update the TX GL and the RX GL separately, making user can enable TX GL self-adaptive or RX GL self-adaptive individually. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor interrupt coalescing init functionFuyun Liang1-9/+20
In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.set_coalesce support to PFFuyun Liang3-4/+188
This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_coalesce support to PFFuyun Liang3-0/+40
This patch adds ethtool_ops.get_coalesce support to PF. Whilst our hardware supports per queue values, external interfaces support only a single shared value. As such we use the values for queue 0. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove TSO config command from VF driverPeng Li2-28/+0
Only main PF can config TSO MSS length according to hardware. This patch removes TSO config command from VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_channels support for VFPeng Li2-0/+31
This patch supports the ethtool's get_channels() for VF. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe()Wei Yongjun1-0/+2
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: socionext: Fix error return code in netsec_netdev_open()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: socionext: include linux/io.h to fix buildArnd Bergmann1-0/+1
I ran into a randconfig build failure: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe': drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration] Including linux/io.h directly fixes this. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11ibmvnic: Don't handle RX interrupts when not up.Nathan Fontenot1-0/+6
Initiating a kdump via the command line can cause a pending interrupt to be handled by the ibmvnic driver when initializing the sub-CRQ irqs during driver initialization. NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic] LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 Call Trace: [c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 [c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90 [c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0 [c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250 [c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80 [c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0 [c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24 [c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120 [c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: implement ndo_features_checkGanesh Goudar1-0/+19
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add support for vxlan segmentation offloadGanesh Goudar3-37/+186
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: implement udp tunnel callbacksGanesh Goudar3-0/+251
Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del to support vxlan tunnelling. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add data structures to support vxlanGanesh Goudar3-0/+208
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11samples/bpf: xdp2skb_meta shows transferring info from XDP to SKBJesper Dangaard Brouer3-0/+324
Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-10Fix a leak in socket(2) when we fail to allocate a file descriptor.Al Viro1-1/+3
Got broken by "make sock_alloc_file() do sock_release() on failures" - cleanup after sock_map_fd() failure got pulled all the way into sock_alloc_file(), but it used to serve the case when sock_map_fd() failed *before* getting to sock_alloc_file() as well, and that got lost. Trivial to fix, fortunately. Fixes: 8e1611e23579 (make sock_alloc_file() do sock_release() on failures) Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-10sfc: add bits for 25/50/100G supported/advertised speedsEdward Cree1-0/+12
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: support the ethtool ksettings API properly so that 25/50/100G worksEdward Cree5-83/+92
Store and handle ethtool link mode masks within the driver instead of just a single u32. However, quite a significant amount of existing code wants to manipulate the masks directly, and thus now uses the first unsigned long (i.e. mask[0]) as though it were a legacy u32 mask. This is ok because all the bits that code is interested in are in the first 32 bits of the mask; but it might be a good idea to change them in future to use the proper bitmap API. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: basic MCDI mapping of 25/50/100G link speedsEdward Cree1-10/+16
Only handles direct speed setting, not autoneg, because the driver is still trying to pretend it uses the legacy ethtool API which doesn't have advertised/supported bits for 25/50/100G. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Remove qdisc before setting a new oneNogah Frankel1-0/+7
If a qdisc is being replaced by another qdisc of the same type, it can simply override over its configuration. However, if it replaces a qdisc of another type, it needs to be removed before setting the new qdisc. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Create a generic replace functionNogah Frankel1-38/+71
Create a generic qdisc replace function. For that goal, add three functions to the qdisc ops struct: * check_params: Checks if the given parameters are offloadable. * replace: Offload the given parameters. * clean_stats: clean the qdisc stats for the offloaded qdisc. integrate RED offloading into using the new internal replace API. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Create a generic destroy functionNogah Frankel1-11/+26
Add a destroy function to the qdiscs ops struct. Create a generic qdisc destroy function, that clears the qdisc metadata as well as calling the specific qdisc destroy function. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Add an ops structNogah Frankel1-14/+62
Qdisc struct have the Qdisc_class_ops struct. This patch introduces the similar ops struct for the mlxsw_sp_qdisc_ops struct. It allows better readability as well as code reusability for the common parts of some functions like destroy. The first operations to be added are the statistics getters. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Unite all handle checksNogah Frankel1-21/+22
Every qdisc op gets the qdisc handle ID as well as its location. Each one of them, beside replace, checks if the handle doesn't match the qdisc in the given location, and if so, it returns without running the actual op. Unite these checks to one comparison function and avoid sending the handle id to these ops. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Add tclass number to the mlxsw_sp_qdiscNogah Frankel1-18/+18
Tclass number is needed for most of the operations related to the qdisc in the driver. Create a field for it in the mlxsw_sp_qdisc instead of passing it to every function as parameter. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Make the clean stats function to be for RED onlyNogah Frankel1-20/+13
Improve readability by changing the clean stats function to handle only RED. Qdiscs that will be offloaded in the future will have a clean stats function of their own. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Clean qdisc statistics structsNogah Frankel1-31/+32
Clean RED offloaded stats and make them more generic by breaking the generic qdisc stats to a struct of their own. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: sch: red: Change offloaded xstats to be incrementalNogah Frankel2-19/+20
Change the value of the xstats requested from the driver for offloaded RED to be incremental, like the normal stats. It increases consistency - if a qdisc stops being offloaded its xstats don't change. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: sch: red: Change the name of the stats struct to be genericNogah Frankel2-6/+7
Change the name of the stats struct to be generic, so it could be used for other qdisc offload, that will be added in the next patches. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Move qdisc's declarations to its designated fileNogah Frankel3-25/+51
Move all the qdisc related data from the spectrum.h to spectrum_qdisc.c. Create an init and fini functions for the qdiscs. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: Fix typo in firmware upgrade messageIdo Schimmel1-1/+1
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10ipv6: sr: fix TLVs not being copied using setsockoptMathieu Xhonneux1-0/+9
Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header to a socket through setsockopt, but the current implementation doesn't copy possible TLVs at the end of the SRH received from userspace. Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr)) { ... } will never complete since the len and type fields of a possible HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error, and the HMAC will not be computed. This commit adds a memcpy in case TLVs have been appended to the SRH. Fixes: a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10ipv6: fix possible mem leaks in ipv6_make_skb()Eric Dumazet1-2/+3
ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c2ab0 ("ipv6: introduce ipv6_make_skb") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by: Mike Maloney <maloney@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enableJiri Pirko1-3/+4
Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: pci: Wait after reset before accessing HWYuval Mintz2-1/+7
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10tcp: make local function tcp_recv_timestamp staticWei Yongjun1-2/+2
Fixes the following sparse warning: net/ipv4/tcp.c:1736:6: warning: symbol 'tcp_recv_timestamp' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net/mlx5e: fix error return code in mlx5e_alloc_rq()Wei Yongjun1-1/+2
Fix to return a negative error code from the xdp_rxq_info_reg() error handling case instead of 0, as done elsewhere in this function. Fixes: 0ddf543226ac ("xdp/mlx5: setup xdp_rxq_info") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10cxgb4vf: Fix SGE FL buffer initialization logic for 64K pagesArjun Vynipadath1-6/+17
We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10tuntap: fix for "tuntap: XDP transmission"Stephen Rothwell1-2/+2
Fixes: fc72d1d54dd9 ("tuntap: XDP transmission") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.